Panasonic TH-86SQE1W, TH-86CQE1W, TH-75SQE1W, TH-75CQE1W, TH-65SQE1W Operating Instructions

Operat ng Instruct ons

Funct onal Manual

UHD LCD D splay For bus ness use

Engl sh

Engl sh

EU

Model No. TH-86SQE1W - TH-86CQE1W	86nch model
TH-75SQE1W - TH-75CQE1W	75nch model
TH-65SQE1W - TH-65CQE1W	65nch model
TH-55SQE1W - TH-55CQE1W	55nch model
TH-49SQE1W - TH-49CQE1W	49nch model
TH-43SQE1W - TH-43CQE1W	43nch model

Read before use

For more nformat on about th s product, please read the “Operat ng Instruct ons – Funct onal Manual”.

To download the “Operat ng Instruct ons – Funct onal Manual”, please v s t the Panason c webs te (https://panason c.net/cns/prod splays/).

•Please read these nstruct ons before operat ng your set and reta n them for future referance.

•Illustrat ons and screens n th s Operat ng Instruct ons aremages for llustrat on purposes, and may be d fferent from the actual ones.

•Descr pt ve llustrat ons n th s Operat ng Instruct ons are

created ma nly based on the 75nch model.	*Actual resolut on:
	3840 × 2160p

TP0819TS0 -PB

Dear Panasonic Customer

Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new LCD Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference.

Retain your purchase receipt also, and note down the model number and serial number of your set in the space provided on the rear cover of these instructions. Visit our Panasonic Web site. https://panasonic.net/cns/prodisplays/

Contents

Before use

•Illustrations and screens in this Operating instructions are images for illustrations purposes, and may be different from the actual ones.

•Descriptive illustrations in this Operating Instructions are created mainly based on the 98-inch model

ImportantSafetyInstruction.....................................	2
FCCSTATEMENT....................................................	5
Precautionsforuse..................................................	5
ImportantSafetyNotice..........................................	6
BATTERYSAFETYGUIDELINES............................	7
About Wireless LANs.............................................	7
Disposal...................................................................	8
Markings on the Product........................................	8
AccessoriesIncluded...............................................	9
GeneralView.........................................................	10
ControlButtonsontheDisplay...............................	11
ConnectingtheIRReceiver....................................	12
TurningtheDisplayOn/Off.....................................	12
RemoteControl.....................................................	13
CAUTIONforACCORD.......................................	14
Fixing the IR Sensor.............................................	15
FixingtheWi-FiDongle..........................................	15
AttachingtheFunctionSLOT................................	16
CautionsWhenMoving........................................	17
Shipping................................................................	18
UsingMainDisplayMenu......................................	18

Media Playback via USB Input.............................	19
CECandCECRCPassthrough..............................	20
AudioReturnChannel............................................	20
SettingsMenuContent...........................................	21
Connectivity............................................................	31
WiredConnectivity.................................................	31
NotesonUsingWiredLAN....................................	31
WirelessConnectivity.............................................	32
WakeON................................................................	32
WirelessDisplay.....................................................	33
ConnectivityTroubleshooting..................................	33
Apps......................................................................	34
InternetBrowser......................................................	34
OSDRotationSupport.............................................	34
DisplayPort.............................................................	34
USB-C....................................................................	35
RealTimeClock(RTC).........................................	35
SerialINTerminalConnection................................	35
ControlCommandviaLAN....................................	36
PJLinkprotocol.......................................................	38
PresetSignals.......................................................	39
SupportedMediaFormatsFromUSB.....................	42
Specifications.........................................................	45
Troubleshooting.....................................................	48
Mountingthedisplay..............................................	51
VesaWallMountMeasurements..........................	51
Cautionswhenattachingwallmountandstand....	51
InstallationOnAnIndentedWall............................	52
Cautions for portrait setting..................................	53
LicenseNotification...............................................	53
SoftwareLicense...................................................	54
ServiceCentre........................................................	55

English - 1 -

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING:To reduce the risk of electric shock, do not remove cover or back. No userserviceable parts inside. Refer servicing to qualified service personnel.

Please read these instructions fully and carefully

before use and keep for future reference

Thelightningflashwitharrow-head withinatriangleis intended to tell the user that parts inside the product are a risk of electric shock to persons.

The exclamation point within a triangle isintendedtotelltheuserthatimportant operating and servicing instructions are in the papers with the appliance.

SLOT USAGE WARNING: Do not plug the SLOT unit while the Display is turned on. Turn on the SLOT unit using the remote control or the buttons on the Display, do not turn it on using the

buttons on the device itself.

WARNING: This device is not intended for use by persons (including children) without physical, sensory or mental capabilities, or lack of experience and/or knowledge unless they have been given supervision or instruction concerning use of the device by a person responsible for their safety.

Important Safety Instruction

•This product is for indoor use only.

Environmental temperature to use this unit

•Whenusingtheunitwhereitisbelow1400m(4593 ft) above sea level: 0 °C to 40 °C (32 °F to104 °F)

•Whenusingtheunitathighaltitudes(1400m(4593 ft)andhigherandbelow2800m(9186ft)abovesea level): 0 °C to 35 °C (32 °F to 95 °F)

Do not install the unit where it is 2800 m (9186 ft) and higher above sea level.

•Failure to do so may shorten the life of the internal parts and result in malfunctions.

•Please keep this manual for further use.

English - 2 -

•Unplug your product before starting to clean. Do not clean the product when it is on. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. If that does not help, please use LCD displaycleansers. Donotapplythecleanerdirectly on the product.

•To prevent breakdown, do not use non-advised accessories.

•Pleasedonotplaceyourproductnearwashbasins, sinks, water pans, pools etc.

•Topreventdamagewhichmayresultinfireorshock hazard,Do not expose the product to dripping or splashing of liquids and do not place objects filled withliquids,suchasvases,cups,etc.onoroverthe product (e.g., on shelves above the unit).

•Pleaseleaveatleast5cmoffreespacebetweenthe product and walls or other furnitures for ventilation purposes.

•That product can only be started by the defined power source on its rating plate. For further information, please contact with your dealer.

•Asasafetyprecaution,athree-wiredgroundingplug is given with the product. As a safety precaution, please do not make any change on the grounding plug.Always use earthed socket outlet for product.

•Please provide the plug and socket to supply the needed power for appliance.

•Please place the product in a position that electric cables cannot be affected by the operations on the product.

•Follow all warnings and instructions marked on the product.

•Follow the on screen instructions for operating the related features.

•To prevent the risk of fire or electric shock, please do not overuse the plugs and extension cords.

Please do not open the lid of the display to service yourself. If the required service needs are not met by an authorized service, dangerous voltage and other risks may occur.

•If you will not use the product for a long period of time, unplug the power cord from the mains.

•Put the product on a well-ventilated place and prevent from bright light, overheat and damp.

•The product should be kept in 0 C° - 40 C°. Otherwise, the appliance may be damaged permanently.

•Plugtheappliancetoagroundedoutlet.Alwaysuse thegroundedpowercordsuppliedwithyourproduct. Manufacturer is not responsible for any damage caused unearthed usage.

•For permanently connected equipment, a readily accessible disconnect device shall be incorporated in the building installation wiring.

•For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily accessible.

•Do not stay in contact with the parts of the product that become hot for long periods of time. Doing so may result in low-temperature burns.

•TheLCDpanelusedinthisproductismadeofglass.

Therefore,itcanbreakwhentheproductisdropped orappliedwithimpact.Becarefulnottobeinjuredby broken glass pieces in case the LCD panel breaks.

•Usage of the display must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury, severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and missile launch control in a weapon system.

•Do not expose the product to direct sunlight or do notplaceopenflamessuchaslitcandlesonthetop of or near the product.

•Do not place any heat sources such as electric heaters, radiators, etc. near the product.

•In order to prevent a potential electrical shock, in extreme weather (storms, lightning) disconnect the product from the mains.

•Donottouchthecontrolsotherthanthosedescribed intheoperatinginstructions.Improperadjustmentof controls not described in the instructions can cause damage,whichoftenrequiresextensiveadjustment work by a qualified technician.

•Do not shake the product. Ensure that it stays in a balanced stance on its position.

•Do not throw or drop any object on your product.

•Donotinterfereonyourproductsscreenoranyother surface with a sharp object.

•Do not keep your product in a humid environment.

•Do not keep your product in an extremely cold environment.

•Do not keep your product in an extremely hot environment.

•Do not place the product on the floor and inclined surfaces.

•Small parts can present choking hazard if accidentally swallowed. Keep small parts away from young children. Discard unneeded small parts and other objects, including packaging materials and plastic bags/sheets to prevent them from being playedwithbyyoungchildren,creatingthepotential risk of suffocation.

•Only use attachments / accessories / specified by the manufacturer.

•The wireless LAN feature of this display shall exclusively be used inside buildings.

•Be sure to disconnect all cables and overturn prevention accessories before moving the Display.

•IftheDisplayismovedwhilesomeofthecablesare still connected, the cables may become damaged, and fire or electric shock could result. Clean the power supply plug regularly to prevent it becoming dusty. If there is a buildup of dust on the plug, the resultant humidity may cause short-circuit, which couldcauseelectricshockorfire.Unplugthepower supply plug from the wall outlet and wipe it with a dry cloth.

Vent holes of the product

The vent holes are designed to provide the product to work constantly and prevent it from overheat. Do not block these openings in anyway. For the same reason, please do not place your product on beds, sofas, carpets and similar surfaces.

Never insert an object into the product through vents or openings. High voltage flows in the product, and inserting any objects in the vents or openings of the product may cause electric shock, short circuit of the internalpartsand/orfire.Forthesamereason,donot spill water or liquid on the product.

Repair

Unless a basic implementation on the product is specified by the producers’ technical department on a document, do not repair your product by yourself. Otherwise, your guarantee may get suspended and you may risk your health or your product. In case of need, consult your authorized service.

•When the cable is worn off or harmed.

•If the product has been dropped or the cabinet has been damaged.

•If the performance of the product is changed or the appliance needs to be repaired.

•When a liquid was spilled on the product or when objects have fallen into the product.

•Whentheproducthasbeenexposedtorainorwater.

•When the product does not operate properly as described in the operating instructions.

Replacement parts

In case the product needs replacement parts, make sure that the service person uses replacement parts specifiedbythemanufacturer,orthosewiththesame characteristicsandperformanceastheoriginalparts. Use of unauthorized parts can result in fire, electric shock and/or other danger.

English - 3 -

Safety checks

Uponcompletionofserviceorrepairwork,requestthe servicetechniciantoperformsafetycheckstoensure that the product is in proper operating condition.

Power Cord

•The power cord is used to disconnect the product from the mains and therefore it must remain readily operable. If the product is not disconnected electrically from the mains, the device will still draw power for all situations even if the product is in standby mode or switched off.

•Use only the power cord supplied with the display.

•Be sure to use the power cord of each destination. Use of the wrong code become cause electric shock or fire.

•Do not damage the power cord nor place heavy objects on it, stretch it, over bend it or step on it. Also, do not add extension cords. Damage to the cord may result in fire or electric shock.

•Whenunpluggingtheappliance,alwayspulldirectly on the plug. Do not pull from the cable when unplugging the appliance.

•Donotusethepowercord withapowertap.Adding an extension cord may lead to fire as a result of overheating.

•Do not remove or insert the power plug with wet hands. Doing so could result in electric shock.

•Unplugthepowercordifitisnotusedforalongtime.

•Do not attempt to repair the power cord if it is broken or malfunctioning. When damaged it must be replaced, this should only be done by qualified personnel.

Especially for child safety

•This equipment is not suitable for use in locations where children are likely to be present.

•Don’t allow children to climb on or play with the display.

•Don’t place the display above furniture that can easily be used as steps.

•Remember that children can become excited while watchingaprogram,especiallyona“largerthanlife” display. Care should be taken to place or install the display where it cannot be pushed, pulled over, or knocked down.

•Care should be taken to route all cords and cables connected to the display so that they cannot be pulled or grabbed by curious children.

Connections

Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/

English - 4 -

disconnecting cables. Also, read the manual of the equipment to be connected.

Be careful not to confuse the input terminal with the outputterminalwhenconnectingcables.Accidentally reversing cables connected to the input and output terminals may cause malfunctions and other problems.

IMPORTANT INFORMATION: Stability Hazard Positioning

If a display is positioned in an unstable or inclined location,itcanbepotentiallyhazardousduetofalling. Manyinjuries,particularlytochildren,canbeavoided by taking simple pre-cautions such as:

•Only using furniture that can safely support the display.

•Ensuring the display is not overhanging the edge of the supporting furniture.

•Notplacingthedisplayontallfurniture(forexample, cupboards or bookcases) without anchoring both the furniture and the display to a suitable support.

•Not placing the display on cloth or other materials that may be located between the display and supporting furniture.

•Using fixing devices like wall mount brackets recommended or supplied by the manufacturer.

•Educatingchildrenaboutthedangersofclimbingon furniture to reach the display or its controls. If your existingproductisbeingretainedandrelocated,the same considerations as above should be applied

Transport and Shipping

•Your device must be kept in its original package to protect from damage to its accessories during transport and shipping.

•Keeptheproductinnormalpositionduringtransport.

•Do not drop the device during transport and protect it against impacts.

•Damagesandfaultsthatoccurduringtransportafter thedeliveryoftheappliancetothecustomerarenot included in the warranty cover.

•Product transportation, installation, repair and servicingmustbedonebyqualifiedtechnicalservice personnel.

Intended Use

•This product is intended to be used in public places suchasschools,offices,theatres,placesofworship.

•Product is only suitable for connecting commercial mains socket outlets. Do not connect product industrial socket outlets.

FCC STATEMENT

Thisequipmenthasbeentestedandfoundtocomply with the limits for a classAdigital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC CAUTION:

To assure continued compliance, follow the attached installation instructions and use only the provided power supply cord. Any changes or modifications not expressly approved by Panasonic Corp. of North

America could void the user’s authority to operate this device.

FCC RF Exposure

Warning:

•This Display is provided with built-in transmitter:

Wireless LAN Adapter with

FCC ID:2AVQS-17WFM21/ IC ID: 25888-17WFM21

•This transmitter complies with FCC and IC radiation exposure limits set forth for an uncontrolled environmentformobileusewithminimum8inches(20 cm) spacing requirement between transmitter and all person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation.

•Otherthird-partywirelesstransmittersshouldnotbe used as they have not been RF exposure evaluated for use with this Display and may not comply with RF exposure requirements.

<Only for wireless LAN if capable of transmission in the 5.15 ~ 5.25 GHz frequency band>

This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range.

IC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potentialforharmfulinterferencetoco-channelMobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product.

Supplier's Decleration of Conformity Model No.

TH-86SQE1W,TH-75SQE1W,TH-65SQE1W, TH-55SQE1W,TH-49SQE1W,TH-43SQE1W, TH-86CQE1W,TH-75CQE1W,TH-65CQE1W,

TH-55CQE1W,TH-49CQE1W,TH-43CQE1W

Responsible Party:

Panasonic Corporation of North America

Two Riverfront Plaza, Newark, New Jersey

07102-5490 Contact Source:

Panasonic System Solutions Company of North

America

1-877-655-2357 General Contact:

http://shop.panasonic.com/support

This device complies with Part 15 of the FCC Rules and all applicable IC RSS standards. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CANADIAN NOTICE:

This Class A digital apparatus complies with Canadian ICES-003.

WARNING:

•Not for use in a computer room as defined in the

Standard for the Protection of Electronic Computer/

Data Processing Equipment, ANSI/NFPA 75.

•For permanently connected equipment, a readily accessible disconnect device shall be incorporated in the building installation wiring.

•For pluggable equipment, the socket-outlet shall be installed near the equipment and shall be easily

Accessible.

Precautions for use

Foreseeable misuse and incorrect use

•Forapparatusintendedtobeusedinvehicles,ships oraircraftorataltitudesexceeding2000mabovesea level,foroutdooruseoringeneralfortheapplication other than mentioned in user manual additional requirements may be necessary.

English - 5 -

Important Safety Notice

CAUTION

Image retention may occur. If you display a still picture for an extended period, the image might remain on the screen. However, it will disappear when a general moving picture is displayed for a while.

Depending on the temperature or humidity conditions, uneven brightness may be observed. This is not a malfunction.

• This unevenness will disappear while applying current continuously. If not, consult the distributor.

Red, blue or green dots on the screen are a liquid crystal panel-specific phenomenon. This is not a malfunction.

• Although the liquid crystal display is manufactured with high-precision technology, always-light- ing dots or non-lighting dots may appear on the screen. This is not a malfunction.

Inch model Dot omission ratio*

86,75,65,55,49,43 0.00004% or less

* Calculated in sub-pixel units according to the ISO09241-307 standard.

WARNING:

This equipment is compliant with Class A of

CISPR32. In a residential environment this equipment may cause radio interference.

English - 6 -

IMPORTANT: THE MOULDED PLUG

FOR YOUR SAFETY, PLEASE READ THE

FOLLOWING TEXT CAREFULLY.

This display is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark or the BSI mark on the body of the fuse.

If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a replacement cover is obtained.

A replacement fuse cover can be purchased from your local Panasonic dealer.

Do not cut off the mains plug.

Do not use any other type of mains lead except the one supplied with this display.

The supplied mains lead and moulded plug are designed to be used with this display to avoid interference and for your safety.

If the socket outlet in your home is not suitable, get it changed by a qualified electrician.

If the plug or mains lead becomes damaged, purchase a replacement from an authorized dealer.

WARNING : — THIS DISPLAY MUST BE EARTHED

How to replace the fuse.

Open the fuse compartment with a screwdriver and replace the fuse.

CAUTION

This appliance is intended for use in environments which are relatively free of electromagnetic fields.

Using this appliance near sources of strong electromagnetic fields or where electrical noise may overlap with the input signals could cause the picture and sound to wobble or cause interference such as noise to appear.

Toavoidthepossibilityofharmtothisappliance,keep itawayfromsourcesofstrongelectromagneticfields.

BATTERY SAFETY GUIDELINES

Used correctly, domestic batteries are a safe and dependable source of portable power. Problems can occur if they are misused or abused resulting in leakage or, in extreme cases, fire or explosion.

Here are some simple guidelines to safe battery use designed to eliminate any such problems.

•Takecaretofityourbatteriescorrectly,observingthe plusandminusmarksonthebatteryandappliance. Incorrect fitting can cause leakage or, in extreme cases, fire or even an explosion.

•Replacethewholesetofbatteriesatonetime,taking care not to mix old and new batteries or batteries of differenttypes,sincethiscanresultinleakageor,in extreme cases, fire or even an explosion.

•Storeunusedbatteriesintheirpackagingandaway from metal objects which may cause a short-circuit resulting in leakage or, in extreme cases, fire or even an explosion.

•Remove dead batteries from equipment and all batteriesfromequipmentyouknowyouarenotgoing to use for a long time. Otherwise the batteries may leak and cause damage.

•Batteries must not be exposed to excessive heat such as sunshine, fire or the like.

•Never dispose of batteries in fire or with hazardous or flammable materials as this can cause them to explode. Please recycle dead batteries; do not put with the normal household waste.

•Neverattempttorechargeordinarybatteries,either in a charger or by applying heat to them. They may leak, cause fire or even explode. There are special rechargeable batteries which are clearly marked as such.

•Supervise children if they are replacing batteries themselves in order to ensure these guidelines are followed.

•Do not ingest the battery, Chemical Burn Hazard.

•This product or the accessories supplied with the productmaycontainacoin/buttoncellbattery.Ifthe coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.

•Remember that small button cell batteries such as used in some hearing aids, toys, games and other appliances, are easily swallowed by young children and this can be dangerous.

•Keep new and used batteries away from children.

•Make sure battery compartments are secure. If the battery compartment does not close securely, stop using the product and keep it away from children.

•Seek immediate medical attention if you believe batteries might have been swallowed or placed inside any part of the body.

•If leaked battery fluid gets on your skin or clothing, rinse immediately and thoroughly. If it gets into your eye, bathe your eye well rather than rubbing and seekmedicaltreatmentimmediately.Leakedbattery fluid that gets into your eye or your clothing may cause a skin irritation or damage your eye.

CAUTION

RISK OF EXPLOSION IF BATTERY IS

REPLACED BYAN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

When using this unit, take safety measures against the following incidents.

•Personal information being leaked via this unit

•Unauthorized operation of this unit by a malicious third party

•Interfering or stopping of this unit by a malicious third party

Take sufficient security measures.

•Set a password for the LAN control and restrict the users who can log in.

•Make your password difficult to guess as much as possible.

•Change your password periodically.

•PanasonicCorporationoritsaffiliatecompanieswill never ask for your password directly. Do not divulge your password in case you receive such inquiries.

•The connecting network must be secured by a firewall, etc.

•When disposing the product, initialize the data before disposing.

About Wireless LANs

●TheadvantageofawirelessLANisthatinformation can be exchanged between a PC or other such equipment and an access point using radio waves as long as you are within range for radio transmissions.

On the other hand, because the radio waves can travel through obstacles (such as walls) and are available everywhere within a given range, problems of the type listed below may occur if security-related settings are not made.

English - 7 -

●A malicious third-party may intentionally intercept and display transmitted data including the content of e-mail and personal information such as your ID, password, and/or credit card numbers.

●Amaliciousthird-partymayaccessyourpersonalor corporate network without authorization and engage in the following types of behavior.

Retrieve personal and/or secret information (information leak)

Spreadfalseinformationbyimpersonatingaparticular person (spoofing)

Overwriteinterceptedcommunicationsandissuefalse data (tampering)

Spread harmful software such as a computer virus and crash your data and/or system (system crash)

●SincemostwirelessLANadaptersoraccesspoints are equipped with security features to take care of these problems, you can reduce the possibility of these problems occurring when using this product by making the appropriate security settings for the wireless LAN device.

●Some wireless LAN devices may not be set for securityimmediatelyafterpurchase.Todecreasethe possibility of occurrence of security problems, before using any wireless LAN devices, be absolutely sure to make all security-related settings according to the instructions given in the operation manuals supplied with them.

Depending on the specifications of the wireless LAN, a malicious third-party may be able to break security settings by special means.

PleasecontactPanasonicifyouneedhelptakingcare of security settings or other such.

If you cannot perform security settings you’re your wireless LAN by yourself, please contact the

Panasonic Support Centre.

●Panasonicaskscustomerstothoroughlyunderstand the risk of using this product without making security settings, and recommends that the customer make security settings at their own discretion and responsibility.

Disposal

When disposing the product, ask your local authority or dealer about the correct methods of disposal.

English - 8 -

For USA-California Only

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material - special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate

Markings on the Product

The following symbols are used on the product as a marker for restrictions and precautions and safety instructions. Each explanation shall be considered where the product bears related marking only. Note such information for security reasons.

Protective Earth Connection: The marked terminal is intended for connection of the protective earthing conductor associated with

the supply wiring.

Hazardous Live Terminal: The marked terminal(s) is/are hazardous live under normal operating conditions.

Any issues which are caused by customer mis-adjustment of any software including the operating system are not covered by the warranty.

Depending on the model you buy, the actual appearance of theproductmaydifferfromtheimagesusedinthismanual.

To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: HDMI input terminal, D-sub input terminal and RS232C input terminal.

Trademark Credits

•Microsoft, Windows, Internet Explorer and

Microsoft Edge are the registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

•Mac, macOS and Safari are the trademarks of Apple Inc. registered in the United States and other countries.

•• PJLink is a registered or pending trademark in Japan,the United States, and other countries and regions.

•HDMI, High-Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator,

Inc. in the United States and other countries.

•JavaScript is a registered trademark or a trademark of Oracle Corporation and its subsidiary and associated companies in the

United States and/or other countries.

•Crestron Connected, Crestron Connected logo, Crestron Fusion, Crestron RoomView and RoomView are trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries.

•USB Type-C® and USB-C® are registered trademarks of USB Implementers Forum.

Evenifnospecialnotationhasbeenmadeofcompany or product trademarks, these trademarks have been

fully respected

Accessories Included

•Remote Control x 1: DPVF3279ZA/X1

•IR Sensor x 1 : DPVF3416ZA/X1

•IR Sensor Holder : DPVF3416ZA/X1

•Screw (for IR Sensor’s Holder) x 2 : DPVF3417ZA/X1

•Power Supply Code : DPVF3408ZA/X1 (USA) DPVF3409ZA/X1 (UK) DPVF3410ZA/X1 (Euro)

DPVF3411ZA/X1 (Aus/NZ)

•Batteries x 2: AA/R6/LR6 type

•Cable Clamper x 3 : DPVF3412ZA/X1

•Wi-Fi dongle x 1 : DPVF3413ZA/X1 for 86inch

•Extended Cable (for Wi-Fi dongle) x 1: DPVF3414ZA/X1

for 86inch

•Spacer x 4: DPVF3499ZA/X1 for 43,49,55SQE1W

•Screw for spacer x 4 : DPVF3500ZA/X1 for 43,49,55SQE1W

•Plate (for IR Sensor's holder) x 1:DPVF3524ZA/X1

for 86inch

Remote Control Transmitter

Power Source

DC 3V (AA Size batteries x 2)

Operating Range

Approx. 7 m (22.9 ft)

(When operated directly in front of remote control sensor)

Mass

Approx. 111 g. (4 oz) including batteries

Dimensions (W x H x D)

51mm x 27mm x 161mm / 2"x1.1"x6.4"

Attention

•Store small parts in an appropriate manner, and keep them away from young children.

•The part numbers of accessories are subject to change without notice. (The actual part number may differ from the ones shown above.)

•In case you lost accessories, please purchase them from your dealer. (Available from the customer service)

•Dispose the packaging materials appropriately after taking out the items.

English - 9 -

General View

Front Side

1. LCD Panel

Rear Side (1)

SQE1 CQE1

13	14		HDMI IN
	HDMI IN
	1	12	1
	D splayPort
		16
	OUT
		15
	IN
	AUDIO		AUDIO
	OUT		OUT

IR IN

11

10

IR IN

									HDMI IN		HDMI IN
									4	9	4
			5V	1.5A	5V	0.5A	5V	0.5A		8
SERIAL IN	PC IN	LAN	USB-C			USB	USB		3		3
1	2	3		4		5		6	2	7	2

1.	SERIAL IN	12.	HDMI1 IN
2.	PC IN	13.	Internal USB Compartment
3.	LAN	14.	Connector for SLOT (Only for SQE1W)
4.	USB-C		Note:
5.	USB		For the compatible function board, consult the
6.	USB		dealer where you purchased the product.
7.	HDMI2 IN	15.	DisplayPort IN (Only for SQE1W)
8.	HDMI3 IN	16.	DisplayPort OUT (Only for SQE1W)

9.HDMI4 IN

10.IR IN

11.AUDIO OUT

English - 10 -

Rear Side (2)

DIGITAL AUDIO

OUT

1		R
			AUDIO	2
	SERVICE 2	L	IN
4			SERVICE 1	3

1.DIGITALAUDIO OUT

2.AUDIO IN

3.RJ12 (SERVICE 1)

4.RJ12 (SERVICE 2)

Note : Don’t use except service personnel for RJ12.

Control Buttons on the Display

To turn on the Display: Press the centre of the joystick in and hold it down for a few seconds, the Display will turn on.

To turn the Display off: Press the centre of the joystick in and hold it down for a few seconds, the Display will turn into standby mode.

					To change source: Press the centre of the
					joystickin,thesourceslistwillappearonthe
					screen.Scrollthroughtheavailablesources
					by pushing the joystick up or down. After
		(rear view)			selecting the source, push the joystick "+"
					To change volume: Increase the volume
					by pushing the joystick "+". Decrease the
					volume by pushing the joystick "-".

Note: Main menu OSD cannot be displayed via joystick.

English - 11 -

Connecting the IR Receiver

Before plugging the Display into the mains supply, connect the supplied IR receiver to the IR input on the Display. Place the IR receiver in sight of your own remote control. Simply operate your remote control whilst pointed at the IR receiver and it will relay the control signal to your Display.

Note : Do not expose the display to direct sunlight or strong light source during use.

Otherwise the remote control not work or malfunction may occur since the IR reciever of the display uses infrared rays.

Turning the Display On/Off

AfterconnectingtheDisplaytothemainssetthemainOn/Offswitchtothe“1”position.TheDisplaywillswitch into standby mode. Press the Standby button on the remote or press the centre of the joystick in located on the rear left side of the Display and hold it down for a few seconds to switch it on from standby.

PressthecentreofthejoystickinandholditdownforafewsecondsorpresstheStandbybuttonontheremote to switch the Display into standby mode. To switch the Display off, set the On/Off switch to the “2” position.

2

3 3

(rear view)

86” 75” / 65” / 55” 49” / 43”

(rear view)

1 Standby button

2 Joystick

3 On/Off Switch (*)

(*) The location of the On/Off switch may differ depending on the model.

LED Status	Status of the display
Power LED lit Green	Power on
Power LED lit Red	Power off (Standby mode)
Power LED Red&Green (slow)	Starting Up
Power LED Red&Green (fast)	Software update

English - 12 -

Remote Control

	1	/	USB V. PICTURE	22
	2			21
	3			20
	4	Q.		19
	5		RECALL	18
		MENU
	6		ENTER
				17
	7	EXIT	RETURN	16
	8			15
			MENU	14
	9	VOL	INPUT
	10
	11
	12	W.Dspla	ASPECT	13
			DISPLAY

1.Standby: Switches On / Off the Display

2.Play: Starts to play selected media

3.Rapid reverse: Moves frames backwards in media such as movies

4.Pause: Pauses the media being played

5.QUICK MENU: Displays picture, sound and system setting menus

6.Directional buttons: Usedtooperatethemenuscreens, content etc.

7.EXIT: Closes and exits from displayed menus or returns to previous screen

8.Coloured Buttons: Follow the on-screen instructions for coloured button functions

Green: Used in the Scheduler Settings menu.

Blue: Stops the video. Press it again to release it.Audio is output even when the video is stopped.

9.VOL +/-: Increases or decreases the volume

10.Mute: Completely turns off the volume of the Display

11.Numeric buttons: Entersanumberoraletterinthetext box on the screen.

12.WIRELESS DISPLAY: Opens the wireless display connection screen

13.ASPECT : Changes the aspect ratio of the screen

14.INPUT : Switches input to display on the screen

15.MENU: Displays the main menu

16.RETURN: Returns to previous screen

17.ENTER: Confirms user selections

18.RECALL: Displaysinformationabouton-screencontent

19.Stop: Stops the media being played

20.Rapid advance: Moves frames forward in media such as movies

21.USB VIEWER: Opens the media browsing screen

22.PICTURE: Cycles between picture modes

Inserting the Batteries into the Remote Control

Remove the back cover to reveal the battery compartment. Insert two size AA batteries. Make sure the (+) and (-) signs match (observe correct polarity). Do not mix old and new batteries. Replace only with same or equivalent type. Place the cover back on.

English - 13 -

CAUTION for AC CORD

86-inch model

Back of the unit

86-inch Model		75-inch Model

AC Cord Fixing

65/55/49/43-inch Model

AC Cord (Supplied)

Note

•WhendisconnectingtheACcord,beabsolutelysuretodisconnecttheACcordplugatthesocketoutletfirst.

•The supplied AC Cord is for this unit exclusive use. Do not use this for other purposes.

English - 14 -

Fixing the IR Sensor

43/49/55/65/75 inch

Attachment of sensor and holder

1.Fix the sensor to holder.

2.Tighten two screws

3.ConnectsensorcabletoIRIN

Sensor Holder

86 inch

Attachment of sensor and holder

1.Remove the five screws.

2.Tighten four screws to plate.

3.Fix the sensor to holder.

4.Tighten two screws to holder

5.Connect sensor cable to IR IN

Plate

(Back View)

(Front View)

Two Screws

(Back View)

Four Screws

(Front View)

Fixing the Wi-Fi Dongle

86-inch model

1.Peal off the release paper of velcro tape.

2.Fix the Wi-Fi Dongle on the rear cover.

3.Connect the extended cable to Wi-Fi dongle and either USB terminal.

Connect to either USB terminal

English - 15 -

Attaching the Function SLOT

(For SQE1W)

1.Remove the two screws and the main unit slot cover.

2.Insert the function board to the main unit slot.

3.Tighten the two screws.

Narrow-width function board

Wide-width function board

English - 16 -