Page 1
Quick Reference Guide
Multi-Function Printer
Model No.
DP-MB340
DP-MB350
Do NOT connect the unit to a computer with the USB cable until prompted to do so during the
setup of Multi-Function Station (CD-ROM).
12
Accessory information:
To ensure that the unit operates properly, we
recommend the use of Panasonic toner
cartridge and drum cartridge.
■ Replacement accessory
– Toner cartridge
L Model No. (Part No.): DQ-TCB008-C
– Drum cartridge
L Model No. (Part No.): DQ-DCB020-C
■ Optional accessory
– Lower input tray
L Model No. (Part No.): DA-LCB350
The supplied Setup CD-ROM provides the
Operating Instructions in PDF format with a
detailed description on how to use the unit.
®
Adobe
Please read before using the unit and save
the CD-ROM for future reference.
You can select the English or French
language.
The display and reports will be in the selected
language. The default setting is English. If you
want to change the setting, see the operating
instructions (feature #110).
Reader® is required to view them.
For assistance, please call
1-800-263-5008 or visit us at
www.panasonic.ca
Page 2
User record (for your future reference)
Date of purchase
Serial number (found on the rear of the unit)
Dealer’s name and address
Dealer’s telephone number
Attach your sales receipt here.
for internal use only. All other reproduction, in whole
or in part, is prohibited without the written consent of
Panasonic Communications Co., Ltd.
© Panasonic Communications Co., Ltd. 2009
Note:
L Save the original carton and packing materials for
future shipping and transportation of the unit.
L After unpacking the product, take care of the packing
materials and/or power plug cap appropriately.
L The suffix in the model number will be omitted in
these instructions.
Caution:
L When you operate this product, the power outlet
should be near the product and easily
accessible.
ENERGY STAR:
®
L As an ENERGY STAR
Partner, Panasonic has
determined that this product meets the ENERGY
STAR guidelines for energy efficiency. ENERGY
STAR is a U.S. registered mark.
Trademarks:
L Adobe and Reader are either registered trademarks
or trademarks of Adobe Systems Incorporated in the
United States and/or other countries.
L All other trademarks identified herein are the
property of their respective owners.
Copyright:
L This material is copyrighted by Panasonic
Communications Co., Ltd., and may be reproduced
2
Page 3
1. Table of Contents
Table of Contents (Quick
Reference Guide)
1. Important Information
Important Information
1.1 For your safety............................................... 4
1.2 Important safety instructions ......................... 6
1.3 Moving the unit.............................................. 6
1.4 Illegal copies.................................................. 6
1.5 Display messages ......................................... 6
1.6 Important Information.................................... 8
Table of Contents
3
Page 4
1. Important Information
1Important Information1Detailed operating instructions ar e on the CD-ROM.Important Information
1.1 For your safety
To prevent severe injury and loss of life/property,
read this section carefully before using the unit to
ensure proper and safe operation of your unit.
L The following symbols are used to classify and
describe the level of hazard and injury caused
when the denotation is disregarded and
improper use is performed.
Denotes a potential hazard that could result in
serious injury or death.
Denotes hazards that could result in minor injury or
damage to the unit.
L The following symbols are used to classify and
describe the type of instructions to be observed.
This type of symbol is used to alert users
to a specific operating procedure that
must be performed carefully.
Do not place objects on the power cord.
Install the unit where no one can step or trip
on the cord.
Do not overload power outlets and
extension cords. This can result in the risk of
fire or electric shock.
Completely insert the AC adaptor/power
plug into the power outlet. Failure to do so
may cause electric shock and/or excessive
heat resulting in a fire.
Regularly remove any dust, etc. from the AC
adaptor/power plug by pulling it from the
power outlet, then wiping with a dry cloth.
Accumulated dust may cause an insulation
defect from moisture, etc. resulting in a fire.
Unplug this unit from power outlets if it emits
smoke, an abnormal smell or makes
unusual noise. These conditions can cause
fire or electric shock. Confirm that smoke
has stopped and contact an authorized
service centre.
Never touch the plug with wet hands. There
is a danger of electric shock.
Installation
This type of symbol is used to alert users
to a specific operating procedure that
must not be performed.
This type of symbol is used to alert users
to a specific operating procedure that
must be emphasized in order to operate
the unit safely.
Power and ground connection
Use only the power source marked on the
unit. If you are not sure of the type of power
supplied to your home, consult your dealer
or local power company.
For safety purposes this unit is equipped
with a grounded plug. If you do not have this
type of outlet, please have one installed. Do
not defeat this safety feature by tampering
with the plug.
Place the unit securely on a stable, level
surface. Serious damage and/or injury may
result if the unit falls.
To prevent the risk of fire or electrical shock,
do not expose this product to rain or any
type of moisture.
Make sure that the unit is installed in a well
ventilated room so as not to increase
density of ozone in the air. Since ozone is
heavier than air, it is recommended that air
at floor level be ventilated.
Operating safeguards
Turn the power switch OFF before cleaning.
Do not use liquid or aerosol cleaners.
Do not cover slots and openings on the unit.
They are provided for ventilation and
protection against overheating. Never place
the unit near radiators, or in a place where
proper ventilation is not provided.
4
Detailed operating instructions are on the CD-ROM.
Page 5
1. Important Information
Never push any objects through slots in this
unit. This may result in the risk of fire or
electric shock. Never spill any liquid on the
unit.
To reduce the risk of electric shock, do not
disassemble this unit. Take the unit to an
authorized service centre when service is
required. Opening or removing covers may
expose you to dangerous voltage or other
risks. Incorrect reassembly can cause
electric shock when the unit is subsequently
used.
Follow all warnings and instructions marked
on this unit.
Do not spill liquids (detergents, cleansers,
etc.) onto the telephone line cord plug, or
allow it to become wet at all. This may cause
a fire. If the telephone line cord plug
becomes wet, immediately pull it from the
telephone wall jack, and do not use.
Unplug this unit from power outlets and refer
servicing to an authorized service centre
when any of the following conditions occur:
Installation and relocation
After moving the unit from cold areas to
warmer areas, wait approximately 30
minutes before turning on the power switch
to allow the unit to adjust to the ambient
temperature. If the power switch is turned on
too soon after a sudden climate change,
condensation may form inside the unit,
causing malfunction.
Never turn the unit upside down or sideways
when moving it.
Never install telephone wiring during a
lightning storm.
Never install telephone jacks in wet
locations unless the jack is specifically
designed for wet locations.
Never touch uninsulated telephone wires or
terminals unless the telephone line has
been disconnected at the network interface.
L If the power cord is damaged or frayed.
L If liquid has been spilled into the unit.
L If the unit has been exposed to rain or
water.
L If the unit does not work normally by
following the operating instructions.
Adjust only controls covered by the
operating instructions. Improper
adjustment may require extensive work
by an authorized service centre.
L If the unit has been dropped or
physically damaged.
L If the unit exhibits a distinct change in
performance.
USB cable/LAN cable
To assure continued emission limit
compliance;
– use only shielded USB cable (Example:
Hi-Speed USB 2.0 certified cable).
– use only shielded LAN cable (category 5
straight cable).
Use caution when installing or modifying
telephone lines.
Do not position the unit in a location where it
is unstable or subject to vibrations.
Laser radiation
The printer of this unit utilizes a laser. Use of
controls or adjustments or performance of
procedures other than those specified
herein may result in hazardous radiation
exposure.
Fuser unit
During or immediately after printing, the
fuser unit gets hot. This is normal. Do not
touch the fuser unit.
Note:
L The area near the recording paper exit may also get
warm. This is normal.
Detailed operating instructions are on the CD-ROM.
5
Page 6
1. Important Information
Toner cartridge
Avoid ingestion, inhalation, eye or skin
contact.
L If ingestion occurs, drink several glasses
of water to dilute stomach contents.
L If inhalation occurs, exit the area
immediately into the fresh air.
L If skin contact occurs, wash thoroughly
with soap and cold water, then air dry.
Do not use hot water or hair dryer.
L If eye contact occurs, flush thoroughly
with water.
L In all cases, seek medical treatment if
adverse symptoms occur.
1.2 Important safety instructions
When using this unit, basic safety precautions should
always be followed to reduce the risk of fire, electric
shock, or personal injury.
1. Do not use this unit near water, for example near a
bathtub, wash bowl, kitchen sink, etc.
2. During thunderstorms, avoid using telephones
except cordless types. There may be a remote risk of
an electric shock from lightning.
3. Do not use the telephone of this unit (if so equipped)
to report a gas leak, when in the vicinity of the leak.
SAVE THESE INSTRUCTIONS
1.3 Moving the unit
The unit is heavy. It is highly recommended that two
people handle this unit.
When moving the unit, hold by the grips (1) on both
sides.
* The pictured model is DP-MB340.
1.4 Illegal copies
L It is unlawful to make copies of certain
documents.
Copying certain documents may be illegal in your
country. Penalties of fines and/or imprisonment may
be imposed on those found guilty. The following are
examples of items that may be illegal to copy in your
country.
– Currency
– Bank notes and cheques
– Bank and government bonds and securities
– Passports and identification cards
– Copyright material or trademarks without the
consent of the owner
– Postage stamps and other negotiable
instruments
This list is not inclusive and no liability is
assumed for either its completeness or accuracy.
In case of doubt, contact your legal counsel.
Notice:
L Install your machine near a supervised area to
prevent illegal copies from being made.
1
6
Detailed operating instructions are on the CD-ROM.
1
1.5 Display messages
To indicate the unit’s status, one or more of the following
messages will appear on the display. See the operating
instructions for details.
DP-MB340:
– “CALL SERVICE”
– “CHANGE DRUM”
– “CHECK DOCUMENT”
– “CHECK DRUM”
– “CHECK INSTALL INPUT TRAY #1”
– “CHECK PAPER”
– “CHECK PICK UP INPUT TRAY #1”
– “DIRECTORY FULL”
– “DRUM LIFE LOW REPLACE SOON”
– “EMAIL SIZE OVER”
– “FAX IN MEMORY”
– “FILE SIZE OVER”
– “KEEP COPYING”
Page 7
– “LEFT COVER OPEN”
– “LOW TEMP.”
– “MEMORY FULL”
– “MODEM ERROR”
– “NO FAX REPLY”
– “OUT OF PAPER INPUT TRAY #1”
– “PAPER JAMMED”
– “PC FAIL OR BUSY”
– “PLEASE WAIT”
– “REDIAL TIME OUT”
– “REMOVE DOCUMENT”
– “REPLACE DRUM CHANGE SUPPLIES”
– “RX MEMORY FULL”
– “SCANNER POSITION ERROR”
– “TONER EMPTY”
“CHANGE SUPPLIES”
– “TONER LOW”
“CHANGE SUPPLIES”
– “TRANSMIT ERROR”
– “TRAY #2 LEFT COVER OPEN”
– “WARMING UP”
DP-MB350:
– “Call Service”
– “Change Drum”
– “Change Supplies Toner Empty”
– “Change Supplies Toner Low”
– “Check Document”
– “Check Drum”
– “Check Install Input Tray #1”
– “Check Paper”
– “Check Pick Up Input Tray #1”
– “Directory Full”
– “Drum Life Low”
– “Email Size Over”
– “Fax in Memory”
– “File Size Over”
– “Keep Copying”
– “Left Cover Open”
– “Low Temperature”
– “Memory Full”
– “Memory Overflow”
– “Modem Error”
– “No Fax Reply”
– “Out of Paper Input Tray #1”
– “Paper Jammed”
– “PC Fail or Busy”
– “Please Wait”
– “Redial Time Out”
– “Remove Document”
– “Replace Drum”
– “RX Memory Full”
– “Scanner Position Error”
– “Transmit Error”
– “Tray #2 Left Cover Open”
– “Warming Up”
1. Important Information
Detailed operating instructions are on the CD-ROM.
7
Page 8
1. Important Information
1.6 Important Information
SAFETY PRECAUTIONS
This unit may only be connected to electrical
outlets that supply 120 V AC.
NOTICE:
This equipment meets the applicable Industry
Canada Terminal Equipment Technical
Specifications. This is confirmed by the
registration number. The abbreviation, “IC:”,
before the registration number signifies that
registration was performed based on a
Declaration of Conformity indicating that
Industry Canada technical specifications were
met. It does not imply that Industry Canada
approved the equipment.
Before installing this equipment, users should
ensure that it is permissible to be connected to
the facilities of the local telecommunications
company. The equipment must also be
installed using an acceptable method of
connection. The customer should be aware
that compliance with the above conditions
may not prevent degradation of service in
some situations.
Repairs to certified equipment should be
coordinated by a representative designated
by the supplier. Any repairs or alterations
made by the user to this equipment, or
equipment malfunctions, may give the
telecommunications company cause to
request the user to disconnect the
equipment.
Users should ensure, for their own protection,
that the electrical ground connections of the
power utility, telephone lines and internal
metallic water pipe system, if present, are
connected together. This precaution may be
particularly important in rural areas.
CAUTION:
Users should not attempt to make such
connections themselves, but should contact
the appropriate electric inspection authority,
or electrician, as appropriate.
NOTICE:
The Ringer Equivalence Number (REN)
assigned to each terminal device provides an
indication of the maximum number of
terminals allowed to be connected to a
telephone interface. The termination on an
interface may consist of any combination of
devices subject only to the requirement that
the sum of the Ringer Equivalence Numbers
of all the devices does not exceed 5.
The Ringer Equivalence Number of This Unit:
(found on the rear of the unit)
8
Detailed operating instructions are on the CD-ROM.
Page 9
Notes
9
Page 10
Notes
10
Page 11
Notes
11
Page 12
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
www.panasonic.ca
PNQW1855ZA
CM0709SY0-C
PNQW1855ZA CM0709SY0-C
Printed in Malaysia
1/2
Loading...