|
|
|
|
en |
Operating Instructions Electrobrush |
||
fr |
Mode d'emploi Électrobrosse |
||
|
SEB 236 |
||
|
Electro Premium |
||
EB01
M.-Nr. 07 871 141
en - IMPORTANT SAFETY INSTRUCTIONS
This Electrobrush complies with all relevant local and national safety requirements. Inappropriate use can, however, lead to personal injury and damage to property.
Please read the separate operating instructions supplied with the Electrobrush before using it for the first time. This prevents both personal injury and damage to the appliance.
Keep these operating instructions in a safe place and pass them on to any future user.
Always disconnect the vacuum cleaner from the power supply when you have finished using it, before changing any accessories, as well as for maintenance work and cleaning. Unplug the power cord from the socket.
Correct use
The Miele Electrobrush is a motor-driven accessory for use with Miele vacuum cleaners only. It must not be used with vacuum cleaners produced by other manufacturers.
The Electrobrush must only be used for household purposes to vacuum and brush dry floor surfaces. Do not use on people or animals.
Any other use, modification or alteration to the Electrobrush is not permitted.
Persons which lack physical, sensory or mental abilities or experience with the vacuum cleaner and Electrobrush should not use it without supervision or instruction by a responsible person.
Safety with children
Danger of suffocation! Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.
Please supervise children in the vicinity of the vacuum cleaner and Electrobrush and do not let them play with them.
2
en - IMPORTANT SAFETY INSTRUCTIONS
Technical safety
Check the voltage rating of the Electrobrush before connecting it to the vacuum cleaner. Your power supply should correspond to the voltage rating listed on the data plate of both the Electrobrush and the vacuum cleaner. Use only AC outlets. Connecting the vacuum or Electrobrush to a higher voltage than indicated on the data plate will damage the Electrobrush and may result in personal injury.
Please check the Electrobrush, the electric hose and the electric wand for any visible signs of damage before using them. Do not use a damaged appliance or component.
Repairs to the Electrobrush, electric hose and electric wand during the warranty period should only be performed by a Miele-authorized service technician. Otherwise, any subsequent damage to them will not be covered by the warranty.
Do not allow the vacuum cleaner or Electrobrush, electric wand or electric hose to get wet. Clean only with a dry or slightly damp cloth. If any moisture gets into the appliance, danger of electric shock.
The Electrobrush, electric wand and electric hose contain power cords. The plug connectors must not come in contact with water. Danger of electric shock. They should only be cleaned with a dry cloth.
Repairs should only be carried out on the vacuum cleaner, the Electrobrush, the electric wand and the electric hose by a Miele-au- thorized service technician. Repairs by unqualified persons can cause considerable danger to users.
Defective components should be replaced by Miele original parts only. Only with these parts can safety of the appliance be assured as intended by the manufacturer.
Proper use
Never touch the Electrobrush while it is rotating.
Accessories and wands must not be used at head level.
3
en - IMPORTANT SAFETY INSTRUCTIONS
Keep the Electrobrush away from curtains, clothing, etc. as these could be vacuumed in and become entangled in the roller brush.
Do not vacuum up anything which has been burning or smoking, e.g., cigarettes, ashes or hot ash, whether glowing or apparently extinguished.
Do not vacuum up any flammable or combustible liquids or gases and do not vacuum in areas where such substances are stored.
Do not use the vacuum cleaner to vacuum up any water, liquid or damp dirt. Wait until any freshly cleaned or shampooed rugs or carpets are completely dry before attempting to vacuum.
California Proposition 65
THE FOLLOWING WARNING IS REQUIRED BY THE STATE OF CALIFORNIA
FOR CALIFORNIA RESIDENTS ONLY:
WARNING:
Cancer and Reproductive Harm -
www.P65Warnings.ca.gov.
SAVE THESE INSTRUCTIONS
4
en - Appliance description
7 |
6 |
1 |
2 |
5 |
3 |
4 |
A |
a Release button
b Connection socket
c Connection socket release button with On/Off switch
d LED (for illuminating the area being vacuumed)
e Multi-function indicator light
f Height indicator
g Foot switch for adjusting the height
5
en-US
References to illustrations
The illustrations referred to in the text
are shown at the end of these operat-
ing instructions.
Features of the Electrobrush
The roller brush in the Electrobrush is motor-driven.
The Electrobrush removes deep-seated dirt and prevents areas of frequent use from becoming a path.
Two of the four rollers are height-ad- justable, allowing you to adjust the gap between the Electrobrush and the floor.
Recommended use
Please note that the Electrobrush should not be used to vacuum deeppile rugs and carpets or valuable hand-knotted rugs and carpets, e.g., Persian and oriental rugs, etc. or long piled rugs and carpets. There is a risk of the threads being pulled out.
The Electrobrush is particularly suitable for the intensive vacuuming of carpets which are subject to hard wear.
The standard floorhead or one of the Miele floorbrushes should be used for cleaning hard floors.
It is also important to observe the flooring manufacturer's cleaning and care instructions.
How to use the Electrobrush
To achieve the best results, pass the Electrobrush slowly backwards and forwards over the carpet or floor.
For rugs with fringe, always draw the Electrobrush from the middle of the rug across the fringe towards the floor to keep the fringe smooth.
Connecting the Electrobrush to the vacuum cleaner
Connect the Electrobrush to the vacuum cleaner as illustrated.
-Stick vacuum cleaners: Fig. 01
-Vacuum Cleaners: Fig. 02 to Fig. 08
Adjusting the height (Fig. 09)
The Electrobrush has five settings for adjusting the distance between the Electrobrush and the floor. The display shows the setting selected.
Setting 1 - closest to the floor
Setting 5 - furthest from the floor
Press the foot switch repeatedly until the required setting is reached.
Switching on and off (Fig. 10)
Press the connection socket release button to release the Electrobrush. The Electrobrush will now switch on.
The Electrobrush will switch itself off if you bring the connection socket back up to its upright position during vacuuming.
On/Off switch on the handle
The electro hoses (SES) have an On/Off switch on the handle which can be used to switch the Electrobrush on and off independently.
This means that you can switch the Electrobrush off during vacuuming and the vacuum cleaner will continue to op-
6
en-US
erate using suction only, e.g. when moving from carpeting to an area rug, for example.
Disconnecting the
Electrobrush (Fig. 11)
Press the release button and pull the suction tube out of the Electrobrush connection socket.
Multi-function indicator light
The indicator light on the Electrobrush lights up yellow to let you know that the Electrobrush is switched on.
Check the vacuum cleaner for any blockages and check all the filters in the vacuum cleaner.
The Electrobrush has to cool down. To speed up this process:
Reconnect the vacuum cleaner to the power supply and switch it back on together with the Electrobrush.
Raise the connection socket to the upright position.
The Electrobrush will be ready for use again after about ten minutes.
Frequently asked questions
The multi-function indicator light is lit up red
The red light indicates a roller blockage, e.g., as a result of a large item being vacuumed up.
Turn off the vacuum cleaner and unplug it.
Remove the blockage.
Press the indicator light.
This resets the blockage sensor.
Reconnect the vacuum cleaner and switch it on.
The Electrobrush switches itself off
The indicator light still lights up yellow. The overheating protection mechanism has been activated due to overheating or a blockage.
Turn off the vacuum cleaner and unplug it.
Maintenance
Removing threads and hairs (Fig. 12)
Use a pair of scissors to cut any threads or hairs that have wound themselves around the roller brush. To guide the scissors, move along the guide track in the roller.
Then, run the vacuum cleaner to vacuum up the cut pieces.
7
fr - INSTRUCTIONS IMPORTANTES DE SÉCURITÉ
Cette électrobrosse est conforme à l'ensemble des exigences réglementaires locales et nationales pertinentes en matière de sécurité. Néanmoins, une utilisation inappropriée de l'appareil peut entraîner des blessures et des dommages matériels.
Veuillez lire le mode d'emploi distinct, livré avec l'électrobrosse, avant de l'utiliser pour la première fois. Vous serez ainsi en mesure d'éviter de vous blesser ou d'endommager l'appareil.
Conservez ce mode d'emploi en lieu sûr afin de pouvoir le consulter au besoin et remettez-le au prochain utilisateur.
Débranchez toujours la prise de l'aspirateur après utilisation, avant de modifier les accessoires ou pour les travaux d'entretien et de nettoyage. Débranchez la prise électrique.
Utilisation conforme
L'électrobrosse Miele est un accessoire actionné par un moteur, prévu pour être utilisé uniquement avec les aspirateurs Miele. Elle ne doit pas être utilisée avec des aspirateurs produits par d'autres fabricants.
L'électrobrosse ne doit être utilisée que pour aspirer et brosser les planchers secs dans un environnement domestique. Ne l'utilisez pas pour aspirer sur les personnes ou les animaux.
Toute autre utilisation ou modification de l'électrobrosse n'est pas permise.
Les personnes qui ne possèdent pas les capacités physiques, l'expérience ou les connaissances requises pour utiliser l'aspirateur et l'électrobrosse doivent être supervisées ou formées par une personne responsable.
Sécurité des enfants
Risque d'asphyxie! Jetez les emballages, sacs et autres produits en plastique et gardez-les en tout temps hors de la portée des enfants.
8
Loading...