en Operating Instructions Vacuum Cleaner
fr Instructions d'utilisation Aspirateur
SCAE0
HS10
M.-Nr. 10 086 010
2
en - Contents
IMPORTANT SAFETY INSTRUCTIONS
Guide to the vacuum cleaner
Before using the vacuum cleaner Using the included accessories Use
Power cord. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Unwinding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Turning the vacuum on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Adjusting the suction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Opening the air inlet valve . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 While vacuuming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Parking, transport and storage
Maintenance and care
Purchasing new filter bags and filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Which filter bags and filters are the right ones? . . . . . . . . . . . . . . . . . . . . . . . . . . 14
When to change the filter bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 How to change the filter bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
When should I change the dust compartment filter? . . . . . . . . . . . . . . . . . . . . . . . 15
Replacing the dust compartment filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 When to change the exhaust filter? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
How to replace the AirClean exhaust filter?. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 How do I change the Active AirClean 50 or the HEPA AirClean 50 exhaust filter? 16
Exchanging exhaust filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
When to change the thread catcher of the floor brush AllTeQ
(depending on model) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Replacing the thread catchers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Cleaning and care |
|
Frequently asked questions |
|
Technical service |
|
Optional accessories |
|
Caring for the environment |
|
LIMITED WARRANTY - VACUUM CLEANERS USA . . . . . . . . . . . . . . . . . . . |
20 |
3
Only Miele FilterBags, filters and accessories with the "Original Miele" logo can be used with this vacuum. Only then can the suction power of the vacuum cleaner reach its optimum potential creating the best possible cleaning results.
USE OF NON-MIELE COMPONENTS MAY VOID THE WARRANTY.
The use of FilterBags made of paper or a similar material, or FilterBags with a cardboard retaining plate can lead to serious damage to the vacuum cleaner and may void the warranty, just as with the use of FilterBags without the "Original Miele" logo.
The "Original Miele" Logo will appear on the packaging or directly on the FilterBag.
Purchasing new FilterBags and filters
Original Miele FilterBags and filters can be purchased from an authorized Miele vacuum dealer or by visiting the Miele store at www.mieleusa.com.
4
en - IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE
Keep these operating instructions in a safe place and pass them on to any future user.
WARNING-
To reduce the risk of fire, electric shock or injury:
Before using
Check the voltage rating of the vacuum cleaner before connecting the power cord to an electrical outlet. Your power source should correspond with the voltage rating plate located on the underside of the vacuum. Use only household AC outlets. Never use DC power sources. If you are not sure of your home's voltage supply, consult a qualified electrician. Connecting the vacuum cleaner to a higher voltage than indicated in these instructions may result in damage to the vacuum cleaner or injury.
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other.) This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not alter the plug in any way.
A damaged vacuum cleaner can be dangerous. Check the packaging, vacuum cleaner and accessories for any signs of damage. Do not use a damaged appliance.
Do not use with a damaged cord or plug. If the appliance is not working as it should, has been dropped, damaged, left outdoors or submerged in water, bring it to a service center.
The electrical outlet must be fitted with a 15 A fuse.
Use
Do not use on people or animals.
Do not use outdoors or on wet surfaces. Only dry surfaces should be vacuumed.
Use only as described in this manual. Use only Miele recommended accessories.
Do not alter or modify the vacuum cleaner.
This appliance is intended for household use only.
5
en - IMPORTANT SAFETY INSTRUCTIONS
Do not allow the vacuum cleaner to be used as a toy. Close attention is necessary when used near children.
Never use the vacuum cleaner without the filter bag or filters in place. Otherwise it could be damaged.
If a filter bag is not inserted, the dust compartment lid will not close. Do not force it shut.
Do not leave the vacuum plugged in. Unplug it from the outlet when not in use and before servicing.
On the underside of the vacuum handpiece is a metal insert designed to absorb static electricity. Please make certain that your hand remains around this metal insert when vacuuming.
Persons which lack physical, sensory or mental abilities or experience with the machine should not use it without supervision or instruction by a responsible person.
Unwind the cord completely to aid the vacuum cleaner in dissipating heat.
This vacuum should not be used to entrap or retain any hazardous materials.
Do not use the vacuum cleaner to pick up liquids or damp dirt. This could impair the electrical safety of the vacuum cleaner. Wait for freshly shampooed carpets to dry.
Do not vacuum anything that is burning or smoking such as cigarettes, matches or hot ashes. The vacuum cleaner could catch fire.
Do not vacuum toner dust. Toner, such as that used in printers and photocopiers can conduct electricity.
Do not use to pick up any flammable or combustible liquids, such as gasoline, or use in areas where they may be present. The vacuum cleaner could explode.
Do not vacuum up items which are heavy, hard or have sharp edges. They could cause a blockage and damage the appliance.
Do not pull or carry by the cord, use the cord as a handle, close a door on the cord, or pull the cord around sharp edges or corners. Do not run the appliance over the cord. Keep the cord away from heated surfaces.
Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
Do not handle the plug or vacuum with wet hands.
Keep the power cord, hair, loose clothing, fingers and all parts of the body away from openings and moving parts.
Do not place anything into the openings of the vacuum cleaner. Do not use if any openings are blocked; keep them free of dust, lint, hair, or anything that may reduce air flow.
This appliance is equipped with a power cord reel. Hold plug when rewinding onto cord reel. Do not allow plug to whip when rewinding.
Turn off all controls before unplugging.
Use extra care when cleaning on stairs.
Floor attachments, accessories and wands must not be used at head level to avoid injury to eyes and ears.
6
en - IMPORTANT SAFETY INSTRUCTIONS
Monitor the filter bag change indicator and inspect all filters regularly. For best performance, the filter bag and filters should be replaced when necessary. A full bag or blocked filter will reduce the vacuum cleaner's suction power. A temperature limiter automatically switches the vacuum cleaner off if it gets too hot, see "Frequently asked questions".
Using accessories
Unplug the vacuum when changing accessories.
Do not use the vacuum without an accessory attached. The rim could be damaged and injuries could result from sharp edges.
Miele filter bags are disposable and intended to be used only once. Do not attempt to reuse them. An over stuffed filter bag will reduce the efficiency of the vacuum cleaner.
Only use genuine Miele filter bags with the Miele quality signet and original Miele filters and accessories. Only then will the manufacturer guarantee its safety. Only use genuine Miele filter bags with the Miele quality signet and original Miele filters and accessories. Only then will the manufacturer guarantee its safety.
The hose contains electrical wires. Do not use when damaged, cut, or punctured. Avoid picking up sharp objects.
Always turn off this appliance before connecting or disconnecting either hose or motorized nozzle.
Cleaning, maintenance and repairs
Turn the vacuum cleaner off after each use and before every cleaning / maintenance. Pull the plug from the outlet.
Never submerge the vacuum cleaner in water. Clean only with a dry cloth or slightly damp cloth when disconnected from the mains supply. If moisture gets into the appliance there is a risk of electric shock.
Repairs must only be performed by an authorized service agent in accordance with national and local safety regulations. Unauthorized repairs could cause injury or machine damage.
If the power cord is damaged it should be replaced along with a new cable reel by Miele Technical Service.
Disposing of an old appliance
Before discarding an old vacuum cleaner, please cut off the power cord and render the plug useless. Ensure the appliance presents no danger to children while being stored for disposal.
SAVE THESE
INSTRUCTIONS
7
en - Guide to the vacuum cleaner
8
en - Guide to the vacuum cleaner
Handpiece
Air inlet valve
Locking button
Accessory clip
Telescopic wand release button
Dust compartment lid release
Telescopic wand
Filter bag
Carrying handle
Floor brush *
Transport/storage holder
Dust compartment filter (motor protection)
Exhaust filter *
Suction power selector
Power cord with plug
Cord rewind switch
Park-System
On / Off switch
Airflow indicator
Elbow
Suction hose
The features marked * may vary or not be available depending on your model.
Some models come standard with a Turbobrush, which is not shown in this figure. A separate Operating manual is supplied with the vacuum.
9
en
The illustrations referred to in the text are shown on the fold-out pages at the end of these operating instructions.
Before using the vacuum cleaner
Attaching the suction hose (see fig. 1)
Insert the elbow into the suction socket until it clicks. Use the inlet guides to direct insertion.
Removing the suction hose (see fig. 2)
Press the release buttons at the sides of the elbow and lift the hose from the socket.
Connecting the suction hose and handpiece (see fig. 3)
Insert the hose into the handpiece until it clicks into place.
Connecting the handpiece and telescopic wand (see fig. 4)
Insert the handpiece into the telescopic wand until it clicks. Use the inlet guides to direct insertion.
To release the handpiece from the telescopic wand, press the locking button (see arrow) and pull the handpiece away from the telescopic wand.
Adjusting the telescopic wand (see fig. 5)
The telescoping wand is composed of two interlocking tubes that can be adjusted to the desired length.
Press the release button and slide the tubes to the desired length.
Attaching the floor brush (see fig. 6)
Insert the wand into the floor brush and twist until it locks with a click.
To release the floor brush from the telescopic wand, press the locking button (see arrow).
Always follow the flooring manufacturer's cleaning and care instructions.
SBB -3 Smooth Floor Brush
The floor brush is suitable to vacuum sturdy hard floors, e. g. tiles and stone floors.
SBD 285-3 AllTeQ Floor Brush (see fig. 7)
The floor brush is suitable for cleaning carpets, rugs, and hard surfaces. For flooring susceptible to scratches, use one of the special Miele floor brushes (see "Optional accessories").
To clean carpets and area rugs:
Press the foot switch marked .
To clean hard flooring:
Press the foot switch marked .
Always use the floor brush with the bristles raised to clean floors with very deep joints or gaps.
Turbobrush
Some models come with a Turbobrush as an accessory. Please refer to the separate operating instructions for instruction on use and maintenance.
10
en
Activating the exhaust filter change indicator
Depending on the model, one of the following standard exhaust filters is installed (see fig. 8).
aAirClean Filter
bActive AirClean 50 Filter (black)
cHEPA AirClean 50 Filter (white)
Open the dust compartment lid and raise until it clicks into place
(see fig. 9).
Remove the marker strip (see fig. 10).
Press the exhaust filter change indicator (see fig. 11).
After about 10-15 seconds, a small red marker will appear in the left-hand side of the display
(see fig. 12).
Close the dust compartment lid until it clicks into place. Take care not to catch the dustbag in the lid.
How the exhaust filter change indicator works
The exhaust filter change indicator displays the usable life of the exhaust filter. The indicator will turn fully red after approx. 50 hours of operation, which is equivalent to one year of average use (see fig. 13).
Using the included accessories (see fig. 14)
The following accessories are included:
Dust brush
For cleaning moldings, decorative or carved items, etc.
The head of the brush swivels and can be turned to the best cleaning position.
Upholstery tool
For cleaning upholstery, mattresses, cushions, curtains, covers etc.
Crevice nozzle
For cleaning in folds, crevices and corners.
Accessory clip for the included accessories (see fig. 15)
Position the accessories as indicated with the symbols on the accessory holder.
Insert the accessory holder either on the hand piece at the handle or on the hose connector of the vacuum cleaner.
Floor brush AllTeQ (see fig. 16) (depending on model)
Also suitable for vacuuming stairs.
For your own safety, always vacuum stairs from bottom to top.
11
en
Use
Power cord
Unwind the cord completely to aid the vacuum in dissipating heat.
Do not pull or carry by the cord, use the cord as a handle, close a door on the cord, or pull the cord around sharp edges or corners. Do not run the appliance over the cord. Keep the cord away from heated surfaces.
Do not unplug by pulling the cord. To unplug grasp the plug, not the cord.
This appliance is equipped with a power cord reel. Hold the plug when rewinding onto cord reel. Do not allow plug to whip when rewinding.
Unwinding (see fig. 17)
Hold the plug and pull the power cord out to the required length (maximum 18 ft / 5.5 m).
Insert the plug into the electrical outlet.
To reduce the risk of electric shock, the vacuum has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not alter the plug in any way.
Danger of overheating and damage.
Rewinding (see fig. 18)
Unplug the vacuum from the outlet.
Press the rewind switch briefly and the power cord will rewind automatically.
Press the rewind switch again to stop the rewinding.
Hold the plug so that it does not whip around when rewinding.
Turning the vacuum on and off (see fig. 19)
Press the On/Off switch.
Adjusting the suction (see fig. 20)
You can adjust the suction power to suit the situation. When you reduce the suction power, the floor brush can be moved with less effort.
The symbols on the controls indicate what each setting is suitable for.
curtains, lightweight fabrics
upholstery, cushions
thick pile carpets, rugs and runners
energy-saving, daily vacuuming with low noise level
low pile carpets
hard flooring, and intensive cleaning of carpets
Turn the rotary selector to the desired suction power setting.
12
en
Opening the air inlet valve (see fig. 21)
The air inlet valve is designed to provide a quick, convenient reduction of suction power, e.g. when moving from a carpet to an area rug.
Open the air inlet valve far enough to reduce the power.
Opening the air inlet valve reduces the power to the tool being used.
While vacuuming (see fig. 22)
The vacuum cleaner can also stand on its end for vacuuming stairs, drapes etc.
To prevent static electricity your hand must touch the metal inlay on the underside of the vacuum handpiece. Be certain to continuously touch this inlay when vacuuming fine dust, flour or sawdust as these materials are more likely to create a static electricity. To further prevent static discharge while vacuuming, pull the vacuum along by the hose with one hand while continuing to hold the handpiece in the other hand.
Parking, transport and storage
Park-System (see fig. 23)
The Park-System allows you to park the telescopic wand and the suction unit on the vacuum cleaner during brief pauses.
Insert the parking clip attachment on the suction unit into the parking slot from above.
If the vacuum cleaner is on an incline, e.g. a ramp, slide the tube into the telescopic wand all the way.
Park-System for storage (see fig. 24)
Turn the vacuum cleaner off after use. Remove the plug from the electrical outlet.
Stand the vacuum cleaner vertically.
It is helpful to completely insert the tubes into the telescopic wand.
Insert the parking clip attachment on the suction unit into the Park-System from above.
This makes the vacuum cleaner easier to carry and store.
Maintenance and care
Turn off and unplug the vacuum cleaner before performing any maintenance work.
The Miele filter system consists of the following three components.
–Filter bag
–Exhaust filter
–Dust compartment filter
Each of these components must be changed periodically to maintain the vacuum cleaner’s efficiency.
Only use Miele filter bags, filters and accessories with the "Original Miele" logo. Only then can the suction power of the vacuum cleaner reach its optimum potential creating the best possible cleaning results.
13
en
The use of filter bags made of paper or a similar material, or filter bags with a cardboard retaining plate can lead to serious damage to the vacuum cleaner and possibly voiding the warranty, just as with the use of filter bags without the "Original Miele" logo.
Purchasing new filter bags and filters
Original Miele filter bags and filters can be purchased from an authorized Miele vacuum dealer or by visiting the Miele online store.
Which filter bags and filters are the right ones?
This vacuum cleaner uses Original Miele filter bags Type F/J/M and an Original Miele filters, the "Original Miele" Logo will appear on the packaging or directly on the filter bag.
An "AirClean" exhaust filter and a dust compartment filter are supplied with every box of Miele filter bags.
If you would like to purchase additional Miele filters separately, contact your vacuum dealer or Miele, please quote the model number of your Miele vacuum cleaner to ensure correct parts are ordered. These parts are also available to order from the online Miele store.
The exhaust filter supplied with the vacuum cleaner can be exchanged with another type of Original Miele filter (see "Exchanging exhaust filters").
When to change the filter bag (see fig. 25)
Change the filter bag when the colored marker in the airflow indicator completely fills the display in red.
Filter bags are disposable articles and made to be used only once. Dispose of full filter bags. Do not attempt to reuse.
Clogged pores reduce the suction power of the vacuum cleaner.
Check the airflow indicator
Attach the floor brush AllTeQ (depending on model) to the vacuum cleaner. All other suction tools can affect the function of the airflow indicator.
Use the On/ Off foot switch to switch the vacuum cleaner on, then select the highest suction setting.
Slightly lift the floor brush AllTeQ from the floor. If the color marker completely fills the indicator window, the filter bag needs to be changed.
How the airflow indicator works
The airflow indicator is designed to show when the bag is full of common household dust and measures the amount of air flow through the filter bag. Normal household dust is a mixture of dust, hair, carpet fluff, threads, sand, etc.
14
en
However, if fine dust, such as drill dust, sand, plaster or flour is vacuumed, the pores of the filter bag may become blocked. The marker will indicate that the bag is "full" even when it is not. The filter bag should be changed as the suction power is greatly reduced.
If the bag is bulging with pet fur, hair, carpet fluff, etc. the indicator may not register "full". This is because the air flow of the filter bag may still be high enough not to activate the marker to show maximum. The filter bag should still be changed.
How to change the filter bag (see fig. 26 + 27)
Open the dust compartment lid (see fig. 9).
The filter bag has a flap that automatically closes to prevent dust from escaping when the bag is removed.
Grasp the finger grip and pull the filter bag out of the holder.
Insert the new filter bag into the holder as far as it will go. Note: Do NOT unfold the filter bag when you first remove it from the box.
Wait until you have inserted the filter bag into the compartment before unfolding it.
Now close the dust compartment lid until it clicks into place, taking care not to catch the filter bag in the lid.
If you do not insert a replacement filter bag, the dust compartment lid is designed not to close. Do not use force!
When should I change the dust compartment filter?
Whenever you start a new box of Miele filter bag filters, you should change the dust compartment filter. A new dust compartment filter is included in every box of Miele filter bags.
Replacing the dust compartment filter (see fig. 28)
Open the dust compartment lid.
Open the filter frame, remove the old filter and replace with a new one.
Close the filter frame.
When to change the exhaust filter?
Depending on the model, your vacuum cleaner will use one of the following standard exhaust filters (see fig. 8):
a AirClean Filter
Change the exhaust filter each time you open a new box of Miele filter bags.
A new AirClean exhaust filter is included in every box of Miele filter bags.
bActive AirClean 50 (black)
cHEPA AirClean 50 (white)
If the display of the exhaust filter change indicator has turned fully red (see fig. 13).
The indicator light will come on after approx. 50 hours of operation, which is equivalent to one year of average use. The vacuum cleaner can still be used however, the filter performance and suction power will be reduced.
Instead of the Active AirClean 50 b or HEPA AirClean 50 c exhaust filter installed as standard, an AirClean a exhaust filter can also be used (see section "Maintenance and care - Exchanging exhaust filters").
15
en
How to replace the AirClean exhaust filter? (see fig. 29 + 30)
Make sure that only one exhaust filter is inserted in the frame.
Open the dust compartment lid.
Open the filter frame and remove the used AirClean exhaust filter with the clean corner (see arrow).
Insert a new AirClean exhaust filter.
But if you want to install an Active AirClean 50 filter or HEPA AirClean 50 filter, you must heed the section "Maintenance and care - Exchanging exhaust filters".
Close the filter frame.
Close the dust compartment lid until it clicks into place.
How do I change the Active AirClean 50 or the HEPA AirClean 50 exhaust filter? (see fig. 31 + 32)
Make sure that only one exhaust filter is inserted in the frame.
Open the dust compartment lid.
Lift the Active AirClean 50 or HEPA AirClean 50 exhaust filter and remove it.
Insert the new Active AirClean 50 or HEPA AirClean 50 exhaust filter and press it downwards.
Press the exhaust filter change indicator (see fig. 11).
After about 10-15 seconds, a small red marker will appear in the left-hand side of the display (see fig. 12).
If you want to install an AirClean exhaust filter, you must adhere to the section "Maintenance and care - Exchanging exhaust filters".
Close the dust compartment lid until it clicks into place.
Exchanging exhaust filters
Make sure that only one exhaust filter is inserted in the frame.
Depending on the model, your vacuum cleaner will use one of the following standard exhaust filters (see fig. 8):
aAirClean Filter
bActive AirClean 50 (black)
cHEPA AirClean 50 (white)
Important
1.If you replace exhaust filter a with exhaust filter b or c, you must be sure to remove the filter frame before inserting the new filter type. The exhaust filter change indicator must also be activated (see fig. 11).
2.If you replace exhaust filter b or c with exhaust filter a, you must be sure to place the new filter in the filter frame * (see fig. 31).
* Filter frame - see section on "Optional accessories"
16
Loading...