McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www mcintoshlabs.com
MT5
Precision Turntable
Owner’s Manual
The lightning flash with arrowhead, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
WARNING - TO REDUCE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
IMPORTANT SAFETY INSTRUCTIONS!
PLEASE READ THEM BEFORE OPERATING THIS EQUIPMENT.
1.Read these instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use this apparatus near water.
6.Clean only with a dry cloth.
7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.
the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Use only with the cart, stand, tripod, bracket, or table specified by the manu-
facturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
13.Unplug this apparatus during lightning storms or when unused for long periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
To prevent the risk of electric shock, do not remove cover or back. No user-serviceable parts inside.
WARNING: Use this product only with the Power Adapter provided. Failure to do so may result in fire and/or electrical shock.
rain or moisture, does not operate normally, or has been dropped.
15.Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment.
16.To completely disconnect this equipment from the a.c. mains, disconnect the AC / DC Adapter from the a.c. receptacle.
17.The mains plug of the power supply cord shall remain readily operable. If the AC /DC Adapter is provided with a mains power supply cord attachment, the plug of this power supply cord shall remain readily operable.
18.Do not expose batteries to excessive heat such as sunshine, fire or the like.
19.Connect mains power supply cord only to a mains socket outlet with a protective earthing connection.
2
Thank You
Your decision to own this McIntosh MT5 Precision Turntable and Sumiko BP2 High Output Moving Coil Cartridge ranks you at the very top among discriminating music listeners. You now have “The Best.” The McIntosh dedication to “Quality,” is assurance that you will receive many years of musical enjoyment from this unit. Please take a short time to read the information in this manual. We want you to be as familiar as possible with all the features and functions of your new McIntosh.
Please Take A Moment
The serial number, purchase date and McIntosh Dealer name are important to you for possible insurance claim or future service. The spaces below have been provided for you to record the information:
Serial Number:________________________________
Purchase Date:_ _______________________________
Dealer Name:_ ________________________________
Technical Assistance
If at any time you have questions about your McIntosh product, contact your McIntosh Dealer who is familiar with your McIntosh equipment and any other brands that may be part of your system. If you or your Dealer wish additional help concerning a suspected problem, you can receive technical assistance for all McIntosh products at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-1545
Fax: 607-724-0549
Customer Service
If it is determined that your McIntosh product is in need of repair, you can return it to your Dealer. You can also return it to the McIntosh Laboratory Service Department. For assistance on factory repair return procedure, contact the McIntosh Service Department at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3515
Fax: 607-723-1917
Copyright 2013 © by McIntosh Laboratory, Inc.
Table of Contents |
|
Safety Instructions....................................................... |
2 |
Thank You and Please Take a Moment....................... |
3 |
Technical Assistance and Customer Service............... |
3 |
Table of Contents......................................................... |
3 |
General Information.................................................... |
4 |
Connector and Cable Information............................... |
4 |
Introduction................................................................. |
5 |
Performance Features.................................................. |
5 |
Dimensions.................................................................. |
6 |
Unpacking the Turntable............................................. |
7 |
Assembling the Turntable....................................... |
8-11 |
Installing a non-supplied Cartridge |
|
and Tone Arm Adjustments.................................. |
11-13 |
Rear Panel Connections and Adjustments................. |
14 |
How to Connect the Turntable................................... |
15 |
Front Panel Display, Switches, Lever |
|
and Record Clamp..................................................... |
16 |
How to Operate the Turntable................................... |
17 |
Specifications............................................................ |
18 |
Packing Instruction................................................... |
19 |
3
General Information and Cable Information
General Information |
Connector and Cable Information |
Caution: To prevent possible damage to the turntable platter bearing, do not move the MT5 Precision Turntable with the platter installed.
1.For additional connection information, refer to the owner’s manual(s) for any component(s) connected to the MT5 Precision Turntable.
2.The MT5 Precision Turntable comes with the Sumiko BP2 High Output Moving Coil Cartridge.
3.It is recommended the Professionals at your McIntosh Dealer, who are skilled in all aspects of Turntables and Phono Cartridges, install the MT5 Precision Turntable and any associated audio equipment.
4.For optimum performance, the setup and adjustment of the MT5 Precision Turntable requires special test recordings and test/measurement equipment. Contact your McIntosh Dealer for additional information and assistance.
5.The MT5 Precision Turntable is supplied with the Sumiko Blue Point 2 High Output Moving Coil Cartridge. It is designed to playback 33-1/3 rpm and 45 rpm vinyl recordings. If you would like to also playback 78 rpm recordings, the McIntosh MCC10 Moving Coil Cartridge has the ability to playback records of all three speeds. Contact your McIntosh Dealer for additional information and assistance.
6.When discarding the unit, comply with local rules
or regulations. Batteries should never be 
thrown away or incinerated but disposed 
of in accordance with the local regulations 
concerning battery disposal. 
7.For additional information on the MT5 and other McIntosh Products please visit the McIntosh Web Site at www.mcintoshlabs.com.
8.When an AC Line Cord is used to connect the supplied AC / DC Adapter to an AC Outlet, it is important the line cord conductor size is a minimum 0.75mm2 for each leg of the two conductor cord.
9.If it should become necessary to replace the supplied AC / DC Adapter and/or the plug adapters, order part number 320508SP from the McIntosh Parts Department. Refer to the illustration below.
Power Control Connectors
The Power Control Output Jack sends Power On/Off
Signals (+12 volt/0 volt) when connected to other McIntosh Components. An additional connection is for controlling the illumination of the 
Power Output Meters on McIntosh |
Power |
Power Amplifiers. A 3.5mm stereo |
Control |
mini phone plug is used for con- |
N/C |
|
|
nection to the Power Control jacks. |
Ground |
Tonearm Headshell Wiring
Refer to the following list of wire colors in the headshell for installing the cartridge into the Headshell:
Cartridge Connections |
Headshell Wire Color |
Left Channel (+) |
White |
Left Channel (-) |
Blue |
Right Channel (+) |
Red |
Right Channel (-) |
Green |
Sumiko BP2 Cartridge Connections
Refer to the following illustration when connecting the McIntosh Cartridge in the Headshell:
Rear View of Sumiko BP2 Cartridge
Left Channel (-) |
Right Channel (-) |
EL |
ER |
Left Channel (+) |
Right Channel (+) |
L |
R |
4
Introduction and Performance Features
Introduction
The McIntosh MT5 Precision Turntable with the Sumiko BP2 High Output Moving Coil Cartridge offers the latest in playback of vinyl recordings. A full complement of performance features allow for the enjoyment of all recordings reproduced with flawless realism. The advanced electronic and mechanical design ensures many years of smooth trouble free operation.
Performance Features
• Advanced Technology Turntable
The MT5 combines the latest technology in Phono Cartridges, Tone Arms, Mechanical Suspensions and Record Platter Rotation for superb performance and accurate operation.
• Moving Coil Cartridge
The Sumiko BP2 High Output Moving Coil Cartridge has the inherent correctness of the impeccable mechanical and electrical design. High impedance, together with high output voltage, ensures noise free musical reproduction. This unique high output design features an alloy cantilever, elliptical diamond stylus with exceptional tracking capability. The ruler-flat frequency response from 20Hz to 20kHz provides solid realistic bass, uncolored midrange and natural high frequencies.
• Tone Arm
The MT5 Tone Arm is made from Dural-Aluminum with special damping material. The Tone Arm is both light in weight and highly rigid. The noise free Vertical Bearings are made from two high precision ceramic surfaces. The Tone Arms lateral movement is performed by a high precision Horizontal Bearing. It also incorporates adjustable magnetic Anti-Skating.
• Turntable Platters
The full size Outer Platter is made from a special silicone acrylic material weights five pounds, one and one-half inch thick. This helps to resist external vibrations from reaching the record during playback
and its large mass provides the perfect flywheel action for stable playback speed. The inner platter is precision machined Anodized Aluminum weights one and one-half pounds and is six and one quarter inches in diameter.
• Precision Motor and Drive Electronics
The Swiss made DC Motor has stainless steel brushes and is controlled by a highly refined servo control system assuring very accurate speed rotation.
•Three Playback Speeds with fine Adjustments
The three playback speeds include 33 rpm, 45 rpm and 78 rpm. There is a separate trim adjustment allowing for accurate music reproduction for each of the three speeds.
•Magnetic Air Dampened Bearing
The MT5 Turntable Platter rotates on a ceramic bearing using magnetic suspension together with a cushion of air to provide vibration free rotation.
• Multi-Layered Dampened Chassis
The MT5 Turntable Chassis has a Stainless Steel base, with a thick Aluminum base plate and Acrylic top plate. The internal dampening material also helps to assure the only sound heard is from the record groove itself.
• Power Control
The Power Control Input connection provides convenient Turn-On/Off of the MT5 Illumination when connected to a McIntosh System with Power Control.
• Fiber Optic Solid State Illumination
The even Illumination of the Front Panel and the Turntable Platter is accomplished by the combination of custom designed Fiber Optic Light Diffusers and extra long life Light Emitting Diodes (LEDs).
•Glass Front Panel and Super Mirror Chassis Finish
The famous McIntosh Illuminated Glass Front Panel and the Stainless Steel Chassis with Super Mirror Finish ensures the pristine beauty of the MT5 will be retained for many years.
5
Dimensions
Dimensions
The following dimensions can assist in determining the best location for your MT5.
Front View of the MT5
17-1/2"
44.5cm
Note: The height measurements are with the Blue Point 2 Cartridge installed.
Rear View of the MT5
16-3/8"
41.6cm
13-3/8"
34.0cm
6-7/32" 7"
15.8cm 17.8cm
Side View of the MT5
|
|
|
|
|
|
|
|
16" |
|
|
|
|
|
|
|
|
|
|
|
40.6cm |
|||||
1" |
|
|
|
|
|
|
|
15-5/16" |
|
|
||
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
38.9cm |
||||
2.5cm |
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3-3/4"
9.5cm
12-3/32" |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1-15/32" |
|||
30.7cm |
|
|
|
|
|
|
|
3.7cm |
|
|
|
|
|
|
|
|
|||
6
Loading...