LG LM-K7960Q, LM-K6960Q Manual

MOSCOW_LM-K7960/K6960/K6961_ENG_MFL39518830

KARAOKE MINI HOME THEATER

OWNER’S MANUAL

MODEL : LM-K7960Q

LM-K7960

LMS-K7960V, LMS-K7960C

LMS-K7960S, LMS-K7960W

LM-K6960Q

LM-K6960

LMS-K6960V, LMS-K6960C, LMS-K6960S

LM-KW6960Q

LM-KW6960

LMS-KW6960V, LMS-KW6960C, LMS-KW6960S

Please read this manual carefully before operating your set.

Retain it for future reference.

Designs and specifications are subject to change without notice for improvement.

The working life of this product is 7 years since the date of purchase.

CD - R/RW

R

USB

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: TO REDUCE THE RISK

OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating.

The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction have been adhered to.

CAUTION:

This Product employs a Laser System.

To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference, should the unit require maintenance, contact an authorized service locationsee service procedure.

Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.

CAUTION: The apparatus shall not be exposed to water, dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION:

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED

CAUTION concerning the Power Cord

Most appliances recommend they be placed upon a dedicated circuit;

That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain.

Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

Disposal of your old appliance

1.When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.

2.All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities.

3.The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.

4.For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.

Power Save Mode

You can set up the unit into an economic power save mode.

In power-on status, press and hold POWER

( STANDBY/ON) button for about 3 seconds.

-Nothing is displayed in the display window when the unit is turned off.

To cancel, press POWER ( STANDBY/ON), CLOCK, TIMER or DEMO.

2

Table of Contents

Before Use

Introduction

Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Front Panel/ Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Preparation

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-11

Before Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-20

Operation
Operation with DVD . . . . . . . . . . . . . . . . . . . . . . . . . . .	20-23
Operation with Audio CD and MP3/WMA Disc . . . . . . .	23-24
Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . .	. . 24
Operation with JPEG Disc . . . . . . . . . . . . . . . . . . . . . . .	. . 25
Operation with DivX Disc . . . . . . . . . . . . . . . . . . . . . . .	. . 26
Operation with RADIO . . . . . . . . . . . . . . . . . . . . . . . . .	27-28
Operation with TAPE . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . 29
Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	. . 29
Operation with KARAOKE . . . . . . . . . . . . . . . . . . . . . .	30-33

Reference

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Language Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Area Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Specifications

About Symbols

About the symbol display

“ ” may appear on the TV screen during operation. This icon means the function explained in this owner’s manual is not available on that specific DVD video disc.

About the disc symbols for instructions

A section whose title has one of the following symbol is applicable only to the disc represented by the symbol.

DVD DVD

Audio CDs

MP3 disc

WMA disc

JPEG disc

DivX disc

About the symbols for instructions

Indicates hazards likely to cause harm to the unit itself or other material damage.

Indicates special operating features of this unit. Indicates tips and hints for making the task easier.

Playable Discs

DVD

(8 cm / 12 cm disc)

Audio CD

(8 cm / 12 cm disc)

In addition, this unit can play a DVD±R, DVD±RW, and CD-R or CD-RW that contains audio titles, MP3, WMA, JPEG or DivX files.

Notes

–Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit.

–Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.

–Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions.

Regional code of the DVD player and DVDs

This DVD player is designed and manufactured

for playback of region “5” encoded DVD soft- 5 ware. The region code on the labels of some

DVD discs indicates which type of player can

play those discs. This unit can play only DVD discs labeled “5” or “ALL”. If you try to play any other discs, the message “Check Regional Code” will appear on the TV screen. Some DVD discs may not have a region code label even though their playback is prohibited by area limits.

ote on DTS-encoded CDs

When playing DTS-encoded CDs, excessive audio level may be heard from the analog stereo output. To avoid possible damage to the audio system, turn down the volume before playing back such discs, adjust the volume gradually, and keep the volume level low. To enjoy DTS Digital SurroundTM playback, an external 5.1 channel DTS Digital SurroundTM decoder system must be connected to the digital output of the unit.

INTRODUCTION

3

Front Panel/ Rear Panel
1
2	14
3	13	15
				COMPONENT VIDEO OUT	EURO AV
				(PROGRESSIVE SCAN)	TO TV
		16	Pr	Pb
					S-VIDEO OPTICAL
					OUT	IN
			Y
4	12					24
5	11				AUX IN
6	10					23
7
8	9
		17
		18

	1.	NUMERIC buttons (0~9)		PRE-OUT
				WOOFER
	2.	DISPLAY WINDOW	19	22
	3.	POWER ( STANDBY/ON) button
	4.	• PROGRAM/MEMORY (PROG./MEMO.) button		AUX IN

•STEREO/MONO (ST./MO.),

HIGH DUBBING (HI-DUBB.) button

	• CD SYNCHRO RECORDING (CD SYNC.),			WOOFER
	NORMAL DUBBING (NOR-DUBB.) button			PRE-OUT
			NE
		20	C
			H
			A	21
			N
	• RECORD/RECORD PAUSE (zREC/[]) button		L
			MIC ANT.
	5. HEADPHONE SOCKET (PHONES): 3.5 mm			AUX IN

6.USB connector

7.	• FUNCTION SELECT buttons			13.	• OPEN/CLOSE (ZOP./CL.) button
	(TUNER, KARAOKE DVD/CD, TAPE, USB, AUX)				• DISC SELECT buttons (DISC1, DISC2, DISC3)
	• SET/CD[], RDS (OPTIONAL) button			14. DISC DOOR
	• XDSS plus button			15.	•	EURO AV TO TV connector
	• XTS Pro button				• VIDEO OUT SELECTOR switch
	• Virtual E.X button			16.	• COMPONENT VIDEO OUT (PROGRESSIVE SCAN)
	• EQ master button				(Y Pb Pr) Connector
	• VOLUME knob				• VIDEO OUT Connector
8.	Z PUSH EJECT position (TAPE 1)			17.	LM-K7960Q model
9.	Z PUSH EJECT position (TAPE 2)				• FM/AM ANTENNA Connector
10.	• PRESET (-/+) buttons				• AUXILIARY INPUT (AUX IN) connector
	• TAPE REVERSE PLAY (b) button			18.	POWER CORD
	• PLAY (B) button			19.	LM-K6960Q/LM-KW6960Q model
	• STOP (xSTOP) button				• FM/AM ANTENNA Connector
	• CD SKIP/SEARCH (. bb/BB >), TAPE				• AUXILIARY INPUT (AUX IN) connector
	REWIND/ FAST FORWARD (. bb/BB >),				• WOOFER PRE-OUT connector
	TUNING (-/+) buttons			20.	LM-KW6960Q model
11.	• MIC VOLUME KNOB (MIC VOL.)				• WIRELESS MIC CHANNEL SWITCH
	• MIC JACKS (MIC1, MIC2):		6.3 mm : OPTIONAL		• WIRELESS MIC ANTENNA Connector
12.	• DISC SKIP (D.SKIP) button			21.	SPEAKER Connectors - LM-KW6960Q model
	• CLOCK button
				22.	SPEAKER Connectors - LM-K6960Q model
	• TIMER button
				23.	SPEAKER Connectors - LM-K7960Q model
	• PLAY MODE, DEMO button
				24.	• S-VIDEO OUT Connector

• OPTICAL IN Connector

4

Remote Control

	POWER			D.SKIP
1		DVD/
	TUNER/BAND		AUX	USB
		KARAOKE
2
				SLEEP
				DIMMER
3
4
	1 - TAPE - 2
5	SETUP	PRESET +		DISPLAY
	TUN. -			TUN. +
6		SELECT
		/ENTER
7	MENU			TITLE
8		PRESET -
9	STOP PAUSE/STEP		PLAY
	PROG./MEMO.	TEMPO
10	REPEAT	b KEY CON #
	REPEAT A-B	MARKER	SEARCH	MUTE
	EQ master	XTS Pro	XDSS plus	VIRTUAL E.X
	SOUND	AUDIO	RETURN	ZOOM
11
	S-TITLE	CLEAR	RDS	PTY
	SHADOW
12
	ECHO VOL.		MIC VOL.

1.POWER button

222. FUNCTION SELECT buttons (TUNER/BAND, DVD/KARAOKE, AUX, USB)

3.NUMERIC buttons (0-9)

4.TAPE FUNCTION buttons

21- REVERSE PLAY (F) - PLAY (G)

20- REWIND/ FAST FORWARD PLAY (FF/GG)

-TAPE 1-2 SELECT buttons (1-TAPE-2)

-RECORD/ RECORD PAUSE (z/[])

-TAPE STOP (x)

5.SET UP button

6.• ARROW buttons ( / / / )

(For use in highlighting a selection on a GUI

19menu screen, TITLE and MENU screen.)

•PRESET (-/+) buttons ( / )

•TUN. (-/+) buttons (/ )

7.SELECT/ENTER button

8.MENU button

(Use the MENU button to display the menu screen

18included on DVD video discs.)

9.STOP (x), PAUSE([])/ STEP, PLAY (G) buttons

10.PROG./MEMO., REPEAT, REPEAT A-B buttons

17 11. EQ master, XTS Pro, SOUND/FEMALE(),

AUDIO/MALE(), SUBTITLE (S-TITLE)/SHADOW, CLEAR buttons

1612. ECHO VOL. (/) buttons

13.MIC VOL. (/) buttons

14.RDS, PTY buttons (OPTIONAL)

1515. XDSS plus, VIRTUAL E.X,RETURN, ZOOM buttons 16. SCAN (FF/GG)/ TEMPO (-/+)/ KEY CONTROL

	14		(b/#)/ SKIP (./>), MARKER, SEARCH,
			MUTE buttons
	13	17.	VOLUME -/+ buttons
		18.	TITLE button
			(Use the TITLE button to display the title screen
			included on DVD video discs.)
		19.	DISPLAY button
		20.	DIMMER button
		21.	SLEEP button
		22.	DISC SKIP (D.SKIP) button

INTRODUCTION

Remote Control Operation Range

Point the remote control at the remote sensor and press the buttons.

•Distance: About 23 ft (7 m) from the front of the remote sensor

•Angle: About 30° in each direction of the front of the remote sensor

Remote control battery installation

Detach the battery cover on the rear of the remote control, and insert two R03 (size AAA) batteries with and aligned correctly.

Caution

Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.).

5

Connections

Connecting to a TV

•Make one of the following connections, depending on the capabilities of your existing equipment.

ips

•Depending on your TV and other equipment you wish to connect, there are various ways you could connect the unit. Use one of the connections described below.

•Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.

Caution

–Make sure the unit is connected directly to the TV. Select the correct AV input on your TV.

–Do not connect your unit to TV via your VCR. The DVD image could be distorted by the copy protection system.

Video connection

Connect the VIDEO OUT jack from the unit to the VIDEO IN jack on the TV using the video cable supplied

(V).

S-Video connection

Connect the S-VIDEO OUT jack on the unit to the S- VIDEO IN jack on the TV using the S-Video cable (S).

Component Video (Color Stream®) connection

Connect the COMPONENT VIDEO OUT (PROGRESSIVE SCAN) (Y Pb Pr) jacks from the unit to the corresponding in jacks on the TV using an Y Pb Pr cable (C).

SCART connection

1	Connect the EURO AV TO TV connector on the unit
	to the corresponding in jacks on the TV by using

the scart cable (T).

2 In order to receive the TV audio signal press the AUX button on the front panel or the remote control until the “TV-AUDIO” indicator is displayed in the display window.

ote

A picture via scart input is not supported.

Caution

VIDEO OUT SELECTOR switch

In power-off status, select either COMPONENT VIDEO OUT (PROGRESSIVE SCAN) or SCART signal of EURO AV TO TV terminal depending on how to connect the unit to the TV.

Progressive Scan (ColorStream® pro) connection

•If your television is a high-definition or “digital ready” television, you may take advantage of this unit’s progressive scan output for higher video resolution.

•If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try Progressive Scan on the unit.

Connect the COMPONENT VIDEO OUT (PROGRESSIVE SCAN) (Y Pb Pr) jacks from the unit to the corresponding in jacks on the TV using an optional Y Pb Pr cable (C).

otes

–Set the Progressive to “On” in the Setup menu for progressive signal, see page 17.

–Progressive Scan can not be selected in the setup menu when the VIDEO OUT SELECTOR switch is set at SCART position.

	COMPONENT VIDEO OUT	EURO AV
	(PROGRESSIVE SCAN)	TO TV
Pr	Pb
		S-VIDEO	OPTICAL
		OUT	IN

Y

WOOFER

PRE-OUT

C

H

A

N

N

E

L

MIC ANT.

AUX IN

C

V

T S

	COMPONENT VIDEO /		VIDEO	S-VIDEO
PROGRESSIVE SCAN INPUT			IN	IN
Pr	Y	Pb
			L

Rear of TV

6

TO TV

VIDEO OUT

EURO AV

TO TV

VIDEO OUT

EURO AV

Connections

Connecting to Antenna

Connect the supplied FM/AM antennas for listening to the radio.

-Connect the AM loop antenna to the AM antenna connector.

-Connect the FM wire antenna to the FM antenna connector.

LM-K7960Q model

AM(MW) loop antenna (aerial) (Supplied)

For AM(MW) reception, connect the loop antenna (aerial) to the terminal marked AM

FM wire

AUX IN

antenna (supplied)

S-VIDEO OPTICAL OUT IN

LM-K6960Q/LM-KW6960Q model

AM(MW) loop antenna (aerial) (Supplied)

For AM(MW) reception, connect the loop antenna (aerial) to the terminal marked AM

FM wire
antenna	WOOFER
	PRE-OUT
(supplied)

S-VIDEO OPTICAL OUT IN

AUX IN

LM-KW6960Q model

otes

•To prevent noise pickup, keep the AM loop antenna away from the unit and other component.

•Be sure to fully extend the FM wire antenna.

•After connecting the FM wire antenna, keep it as horizontal as possible.

Connecting to Auxiliary Equipment

You can use VCR or other unit connected to the AUX connector.

This unit receives the analog signal from auxiliary equipment.

LM-K7960Q model

AUX IN

VCR (or Auxiliary

Device, etc)

	To AUDIO IN	IN	OUT
		VIDEO
		AUDIO (L)
		AUDIO (R)
		To AUDIO OUT
LM-K6960Q/LM-KW6960Q model
	WOOFER
	PRE-OUT
	AUX IN
		VCR (or Auxiliary
		Device, etc)
	To AUDIO IN	IN	OUT
		VIDEO
LM-KW6960Q		AUDIO (L)
	model
		AUDIO (R)
		To AUDIO OUT
1	Connect a VCR or auxiliary device, etc to the
	AUX connector.

2 Press the AUX button on the front panel or the remote control until the “AUX” indicator is displayed in the display window.

Connecting to Optional Equipment

You can use an optical output of a Digital Device to the OPTICAL IN connector.

This unit receives the optical digital signal from optional equipment.

			OPTICAL
			OUT
VIDEO OUT	EURO AV		DVD Player
	TO TV
	S-VIDEO OPTICAL		(or Digital Device,
	OUT	IN
			etc)
	WOOFER

1	Connect an optical output of DVD Player (or
	Digital Device etc) to the OPTICAL IN connector.

2 Press the AUX button on the front panel or the remote control until the “OPT IN” indicator is displayed in the display window.

PREPARATION

7

Connections
Connecting USB	Connecting to the Wireless microphone
	antenna - LM-KW6960Q model
	When you use the wireless microphone, connect the
	supplied wireless microphone antenna to the wireless
	microphone antenna jack of the unit.

USB Memory,		AUX IN
MP3 Player (or	C	REAR		REAR	CENTER WOOFER	FRONT	FRONT
	NE
	H	R (8	)	L (8 )	(8 ) (3 )	R (4 )	L (4 )
	A
	N
Memory Card	L
	MIC ANT.
Reader, etc.)

Wireless

microphone

Connect the USB port of USB memory (or MP3

antenna

1 player, etc) to the USB connector on the front

panel.

Select USB function by pressing the USB

2 button on the front panel or the remote control.

Setting the Wireless microphone

The “USB” is displayed in the display window.

Channel - LM-KW6960Q model

To Remove the USB from the unit

•

If there is a similar wireless microphone product

1. Choose a different function mode or press the STOP

nearby, interference may occur. In this case, change

the channel switch to other channel, and turn off the

(x) twice in a row.

power, then turn on again.

2. Remove the USB from the unit.

By using the Channel Switch, set the same channel.

otes

[Wireless microphone]

[Rear panel of the unit]

•

Don’t extract the USB device in operating.

Open the cover.

•

Music files (MP3/WMA), image files (JPEG) and DivX

C

H

files can be played.

A

N

•

This unit can not use USB HUB.

N

L

E

• Recommended Memory Card

Compact Flash Card (CFC), Micro Drive (MD), Smart

Media Card (SMC), Memory Stick (MS), Secure Digital

Card (SD), Multi Media Card (MMC), Memory Stick Pro

ON

(MS-Pro)

- Compatable with : FAT16,32

- Only use the memory cards recommended.

•

Devices which require additional program installation

•

You can set the channel change with 9 types.

when you have connected the unit to a computer are

not supported.

Channel switch number

Channel number

•

In case of a USB HDD, make sure to connect an auxil-

1

2

3

4

iary power cord to the USB HDD for porper operation.

ON

OFF

OFF

OFF

CH1

A primary partition of drive is supported up to four. If

OFF

ON

OFF

OFF

CH2

there is an extention partition it is not supported.

ON

ON

OFF

OFF

CH3

•

If the drive of USB device is two or more, a drive

OFF

OFF

ON

OFF

CH4

folder is displayed on the screen. If you want to

ON

OFF

ON

OFF

CH5

move to the previous menu after you select a folder,

OFF

ON

ON

OFF

CH6

press RETURN.

ON

ON

ON

OFF

CH7

•

Digital camera and mobile phone are not supported.

OFF

OFF

OFF

ON

CH8

ON

OFF

OFF

ON

CH9

8

Connections

Speaker System Connection - LM-K7960Q model

Connect the speakers using the supplied speaker cables by matching the colors of the terminals and those of the cords. To obtain the best possible surround sound, adjust the speaker parameters (distance, level, etc.).

PREPARATION

	COMPONENT VIDEO OUT	EURO AV
	(PROGRESSIVE SCAN)	TO TV
Pr	Pb
		S-VIDEO	OPTICAL
		OUT	IN

Y

AUX IN

REAR

R (8 )

REAR

L (8 )

CENTER

(8 )

WOOFER

(3 )

FRONT

R (4 )

FRONT

L (4 )

otes

•Be sure to match the speaker cord to the appropriate terminal on the components: + to + and – to –. If the cords are reversed, the sound will be distorted and will lack base.

•If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers.

•Connect the Front Left/Right speaker correctly. If it is reversed, the sound may be distorted.

9

Connections

Speaker System Connection - LM-K6960Q model

Connect the speakers using the supplied speaker cables by matching the colors of the terminals and those of the cords. To obtain the best possible surround sound, adjust the speaker parameters (distance, level, etc.).

If you feel lack of bass frequency

Connect an active subwoofer to the WOOFER PRE-OUT connector using a monaural audio cord (not supplied).

Active subwoofer (Not supplied)

Pr

Y

COMPONENT VIDEO OUT (PROGRESSIVE SCAN)

Pb

EURO AV

TO TV

S-VIDEO	OPTICAL
OUT	IN

WOOFER

PRE-OUT

REAR	REAR	CENTER	FRONT	FRONT
R (8 )	L (8 )	(8 )	R (4 )	L (4 )

AUX IN

otes

•Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are reversed, the sound will be distorted and will lack base.

•If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers.

•Connect the Front Left/Right speaker correctly. If it is reversed, the sound may be distorted.

10

Connections

Speaker System Connection - LM-KW6960Q model

Connect the speakers using the supplied speaker cables by matching the colors of the terminals and those of the cords. To obtain the best possible surround sound, adjust the speaker parameters (distance, level, etc.).

PREPARATION

If you feel lack of bass frequency

Connect an active subwoofer to the WOOFER PRE-OUT connector using a monaural audio cord (not supplied).

Active subwoofer (Not supplied)

Pr

Y

COMPONENT VIDEO OUT	EURO AV
(PROGRESSIVE SCAN)	TO TV

Pb

	WOOFER
	PRE-OUT
C
H	REAR
A	R (8	)
N
N
E
L
MIC ANT.

S-VIDEO	OPTICAL
OUT	IN

REAR	CENTER
L (8 )	(8 )

FRONT

R (4 )

FRONT

L (4 )

AUX IN

otes

•Be sure to match the speaker cables to the appropriate terminal on the components: + to + and – to –. If the cables are reversed, the sound will be distorted and will lack base.

•If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers.

•Connect the Front Left/Right speaker correctly. If it is reversed, the sound may be distorted.

11