Parts overview
Quick Start Guide
MBM66498801 0).(1 H
U.S. Cellular®
Customer Care: 1-888-944-9400
Wireless charging |
SIM/Memory card |
antenna area |
tray |
Fingerprint sensor |
Rear camera lenses |
Laser detection |
NFC area |
auto-focus |
Speaker |
Flash |
|
Do NOT attempt to remove the back cover.
•This device has a non-removable battery. Do not attempt to remove the back cover. Doing so may severely damage the battery and device, which could cause overheating, fire, and injury.
Installing the SIM card and memory card
1Turn the phone off, insert the ejection pin into the hole on the card tray and push until the card tray pops out. Then, carefully pull the tray out.
2Place the Nano SIM card or memory card on the card tray with the gold contacts facing downwards. Make sure that card is positioned as shown below.
Nano SIM card
Memory card (optional-sold separately)
NOTE
•Always use a Nano SIM card supplied by your service provider.
•For problem-free performance, it is recommended to use the phone with the correct type of SIM card. Always use a factory-made SIM card supplied by your service provider.
•The memory card can be easily damaged by improper operation. Please be careful when inserting, removing, or handling it.
•In order for the water-resistant and dust-resistant features to work effectively, the card tray must be inserted correctly.
Warning
•Some memory cards may not be fully compatible with the device. If you use an incompatible card, it may damage the device or the memory card, or corrupt the data stored in it.
•Be careful with the ejection pin since it has a sharp edge.
•If you insert the card tray into your device while the card tray is wet, your device may be damaged. Always make sure the card tray is dry.
Turning the power on
Press and hold the Power/Lock key for a few seconds.
NOTE
•When the device is turned on for the first time, initial configuration takes place. The first booting time for the phone may be longer than usual.
Turning the power off
Press and hold the Power/Lock key, then select
Power off.
Restarting the device
When the device is not working properly or does not respond, simply press and hold the Volume Down and Power/Lock keys until the device restarts.
|
|
|
|
|
|
|
|
|
LM-G710VM |
Printed in Korea |
|
|
|
|
|
|
|
|
|
Loading...