LG 49NANO80UNA, 55NANO80UNA, 65NANO80UNA, 49NANO81ANA, 49NANO81UNA Owner's Manual

OWNER’S MANUAL

Safety and Reference

LED TV*

* LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it for future reference.

49NANO80UNA	49NANO85UNA	55NANO90UNA
55NANO80UNA	55NANO85UNA	65NANO90UNA
65NANO80UNA	65NANO85UNA	75NANO90UNA
49NANO81ANA	75NANO85UNA	86NANO90UNA
49NANO81UNA	49NANO86UNA	55NANO91ANA
55NANO81ANA	55NANO86UNA	55NANO91UNA
55NANO81UNA	65NANO86UNA	65NANO91ANA
65NANO81ANA		75NANO91ANA
65NANO81UNA		86NANO91ANA

*MFL71520732*

www.lg.com

Printed in Korea

(2001-REV00)

Copyright © 2020 LG Electronics Inc. All Rights Reserved.

<![if ! IE]>

<![endif]>ENGLISH

Important Safety Instruction

•• Read these instructions.

•• Keep these instructions.

•• Heed all warnings.

•• Follow all instructions.

•• Do not use this apparatus near water.

•• Clean only with dry cloth.

•• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

•• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

•• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

•• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

•• Only use attachments/accessories specified by the manufacturer.

•• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

•• Unplug this apparatus during lightning storms or when unused for long periods of time.

•• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

By using this product, you agree that all disputes between you and LG arising out of or relating in any way to this product (including but not limited to warranty disputes) shall be resolved exclusively through binding arbitration on an individual basis. The terms of the arbitration agreement (including details on the procedure for resolving disputes) is available at www.lg.com/us/arbitration (USA) or www.lg.com/ca_en/arbitration

(Canada).

2

Warning! Safety instructions

CAUTION

RISKOFELECTRICSHOCK

DONOTOPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT

REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s

enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The symbol is intended to alert the user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the device.

WARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

•• TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

•• Do not place the TV and/or remote control in the following environments:

-- Keep the product away from direct sunlight.

-- An area with high humidity such as a bathroom

-- Near any heat source such as stoves and other devices that produce heat.

-- Near kitchen counters or humidifiers where they can easily be exposed to steam or oil.

-- An area exposed to rain or wind.

-- Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).

-- Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

-- Do not install in excessively dusty places.

Otherwise, this may result in fire, electric shock, combustion/ explosion, malfunction or product deformation.

•• Ventilation

-- Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase.

-- Do not install the product on a carpet or cushion.

-- Do not block or cover the product with cloth or other materials while unit is plugged in.

•• Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.

•• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.

•• Do not move the TV whilst the Power cord is plugged in.

•• Do not use a damaged or loosely fitting power cord.

•• Be sure to grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

•• Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.

•• Disconnecting the Device from the Main Power

-- The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.

•• Do not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury.

•• Outdoor Antenna Grounding (Can differ by country):

-- If an outdoor antenna is installed, follow the precautions below.

An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur.

Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges.

Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

<![if ! IE]>

<![endif]>ENGLISH

3

<![if ! IE]>

<![endif]>ENGLISH

•• Grounding (Except for devices which are not grounded.)

-- TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet. Ensure that you connect the earth ground wire to prevent possible electric shock.

•• Never touch this apparatus or antenna during a lightning storm. You may be electrocuted.

•• Make sure the power cord is connected securely to the TV and wall socket if not secured damage to the Plug and socket may occur and in extreme cases a fire may break out.

•• Do not insert metallic or inflammable objects into the product. If a foreign object is dropped into the product, unplug the power cord and contact the customer service.

•• Do not touch the end of the power cord while it is plugged in. You may be electrocuted.

•• If any of the following occur, unplug the product immediately and contact your local customer service.

-- The product has been damaged.

-- If water or another substance enters the product (like an AC adapter, power cord, or TV).

-- If you smell smoke or other odors coming from the TV

-- When lightning storms or when unused for long periods of time.

Even the TV is turned off by remote control or button, AC power source is connected to the unit if not unplugged in.

•• Do not use high voltage electrical equipment near the TV (e.g., a bug zapper). This may result in product malfunction.

•• Do not attempt to modify this product in any way without written authorization from LG Electronics. Accidental fire or electric shock can occur. Contact your local customer service for service or repair. Unauthorized modification could void the user’s authority to operate this product.

•• Use only an authorized attachments / accessories approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage.

•• Never disassemble the AC adapter or power cord. This may result in fire or electric shock.

•• Handle the adapter carefully to avoid dropping or striking it. An impact could damage the adapter.

•• To reduce the risk of fire or electrical shock, do not touch the TV with wet hands. If the power cord prongs are wet or covered with dust, dry the power plug completely or wipe dust off.

•• Batteries

-- Store the accessories (battery, etc.) in a safe location out of the reach of children.

-- Do not short circuit, disassemble, or allow the batteries to overheat. Do not dispose of batteries in a fire. Batteries should not be exposed to excessive heat.

-- Caution: Risk of fire or explosion if the battery is replaced by an incorrect type.

•• Moving

-- When moving, make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV. Otherwise, this may result in product damage, fire hazard or injury.

•• Keep the packing anti-moisture material or vinyl packing out of the reach of children.

•• Do not allow an impact shock, any objects to fall into the product, and do not drop anything onto the screen.

•• Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it. It may cause damage to screen.

•• Cleaning

-- When cleaning, unplug the power cord and wipe gently with a soft/dry cloth. Do not spray water or other liquids directly on the TV. Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol etc., which can damage the product and/or its panel. Otherwise, this may result in electric shock or product damage.

4

Preparing

Optional Extras

•• When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute.

•• Image shown may differ from your TV.

•• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

•• The available menus and options may differ from the input source or product model that you are using.

•• New features may be added to this TV in the future.

•• The device must be easily accessed to a location outlet near the access. Some devices are not made by turning on / off button, turning off the device and unplugging the power cord.

•• The items supplied with your product may vary depending upon the model.

•• Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

•• For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width.

•• Use an extension cable that supportsif the USB cable or USB flash drive does not fit into your TV’s USB port.

B	B	* A <	10 mm (0.39 inches)
		=
A	A	* B =< 18 mm (0.7 inches)

•• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

•• Recommended HDMI cable types (3 m (9.84 feet) or less) -- Ultra High Speed HDMI®/™cable

Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices work only with certain models. The model name or design may be changed due to the manufacturer’s circumstances or policies.

Magic Remote Control

MR20GA

Check whether your TV model supports Bluetooth in the Wireless Module Specification to verify whether it can be used with the Magic Remote.

<![if ! IE]>

<![endif]>ENGLISH

5

Wall Mounting Bracket

		(Depending upon model)
		Make sure to use screws and wall mount bracket that meet the VESA
	<![if ! IE]> <![endif]>ENGLISH	standard. Standard dimensions for the wall mount kits are described in
		the following table.

						55NANO80*
		49NANO80*				55NANO81*
	Model	49NANO81*				55NANO85*
		49NANO85*				55NANO86*
		49NANO86*				55NANO90*
						55NANO91*
	VESA (A x B) (mm)	200 x 200				300 x 300
	Standard screw	M6				M6
	Number of screws	4				4
	Wall mount bracket	LSW240B				OLW480B
		MSW240				MSW240
		65NANO80*
		65NANO81*				75NANO85*
		65NANO85*
	Model					75/86NANO90*
		65NANO86*
						75/86NANO91*
		65NANO90*
		65NANO91*
	VESA (A x B) (mm)	300 x 300				600 x 400
	Standard screw	M6				M8
	Number of screws	4				4
	Wall mount bracket	OLW480B				LSW640B

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

•• It is recommended to move the TV in the box or packing material that the TV originally came in.

•• Before moving or lifting the TV, disconnect the power cord and all cables.

•• When holding the TV, the screen should face away from you to avoid damage.

•• Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.

•• Use at least two people to move a large TV.

•• When transporting the TV by hand, hold the TV as shown in the following illustration.

•• When transporting the TV, do not expose the TV to jolts or excessive vibration.

•• When transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right.

•• When handling the TV, be careful not to damage the protruding buttons.

6

•• Avoid touching the screen at all times, as this may result in damage to the screen.

•• Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen.

•• When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

Mounting on a Table

1Lift and tilt the TV into its upright position on a table.

•Leave a minimum of 10 cm (4 inches) space from the wall for proper ventilation.

		10 cm
		(4 inches)
		cm
	10 cm	10
		10 cm
		10 cm

(Depending upon model)

2 Connect the power cord to a wall outlet.

•• Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.)

•• If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.

•• Do not use any unapproved items to ensure the safety and lifespan of the product.

•• Any damages or injuries by using unapproved items are not covered by the warranty.

•• Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)

•• Do not fasten the screws with excessive force otherwise they may strip and become loose.

Securing TV to the Wall

(Depending upon model)

1Insert and tighten the eye-bolts or TV brackets and bolts on the back of the TV.

•If there are bolts inserted at the eye-bolts position, remove the bolts first.

2Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface.

•• Use a platform or cabinet that is strong and large enough to support the TV securely.

•• Brackets, bolts, and ropes are optional. You can obtain additional accessories from your local dealer.

<![if ! IE]>

<![endif]>ENGLISH

7

Mounting to the Wall

		An optional wall mount can be used with your LG Television. Consult
		with your local dealer for a wall mount that supports the VESA
	<![if ! IE]> <![endif]>ENGLISH
		standard used by your TV model. Carefully attach the wall mount
		bracket at the rear of the TV. Install the wall mount bracket on a solid
		wall perpendicular to the floor. If you are attaching the TV to other
		building materials, please contact qualified personnel to install the
		wall mount. Detailed instructions will be included with the wall mount.
		We recommend that you use an LG brand wall mount. The LG wall
		mount is easy to adjust or to connect the cables. When you do not use
		LG’s wall mount bracket, use a wall mount bracket where the device is
		adequately secured to the wall with enough space to allow connectivity
		to external devices. If you are using a non-adjustable mount, attach the
		mount to the wall. Attach the cables to the TV first, then attach the TV
		to the mount.
				10cm	(4inches)
					cm
		10 cm			10
					10 cm
				10 cm

(Depending upon model)

•• Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

•• For more information of screws and wall mount bracket, refer to the Separate Purchase.

•• If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.

•• When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

•• Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

(Depending upon model)

•• Do not use a sharp object when you detached the cable cover. This could damage the cable or the cabinet. It may also cause personal harm, (Depending upon model).

•• When installing the wall mounting bracket, it is recommended to cover the stand hole using tape, in order to prevent the influx of dust and insects, (Depending upon model).

Stand hole

8

Connections

You can connect various external devices to the TV. For more information on external device’s connection, refer to the manual provided with each device.

Antenna/Cable

Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an RF cable is optional.

•• Make sure not to bend the copper wire of the RF cable.

Copper wire

•• Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.

•• Use a signal splitter to use 2 TVs or more.

•• DTV Audio Supported Codec: MPEG, Dolby Digital

•• This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been confirmed.

Other connections

Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable.

HDMI

•• When connecting the HDMI cable, the product and external devices should be turned off and unplugged.

•• Supported HDMI Audio format (Depending upon model): True HD (48 kHz),

Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz), PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)

•• → →[Picture] →[Additional Settings] →[HDMI Ultra HD Deep Color]

(Only NANO80*, NANO81*)

-- On: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0) -- Off: Support 4K @ 50/60 Hz (4:2:0)

(Except for NANO80*, NANO81*)

-- On: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0),

<3,4 port Only> 4K @ 100/120 Hz (4:4:4, 4:2:2, 4:2:0) -- Off: Support 4K @ 50/60 Hz (4:2:0)

If the device connected to Input Port also supports Ultra HD Deep Color, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, change the TV’s [HDMI Ultra HD Deep Color] setting to off.

-- This feature is available only on certain models which support HDMI Ultra HD Deep Color.

External Devices

Supported external devices are: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices. For more information on external device’s connection, refer to the manual provided with each device.

•• If you record a TV program on a Blu-ray/DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual provided with the connected device.

•• The external device connections shown may differ slightly from illustrations in a manual.

•• Connect external devices to the TV regardless about the order of the TV port.

•• If you connect a gaming device to the TV, use the cable supplied with the gaming device.

•• Refer to the external equipment’s manual for operating instructions.

•• In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the [Picture] menu until the picture is clear. Depending upon the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.

•• Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it directly to the USB port on the TV.

•• When connecting via a wired LAN, it is recommended to use a CAT 7 cable.

•• The TV may be capable of operating without a set-top-box from a multichannel video programming distributor (MVPD).

<![if ! IE]>

<![endif]>ENGLISH

9

Remote RS-232C setup

Using Button

<![if ! IE]>

<![endif]>ENGLISH

To obtain the RS-232C external control setup information, please visit www.lg.com. Download and read the manual, (Depending upon model).

•• Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.

•• When connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product.

You can simply operate the TV functions, using the button.

Basic functions

Power On (Press)

Power Off1 (Press and Hold)

Menu Control (Press2)

Menu Selection (Press and Hold3)

1All running apps will close.

2You can access and adjust the menu by pressing the button when TV is on.

3You can use the function when you access menu control.

Adjusting the menu

When the TV is turned on, press thebutton one time. You can adjust the Menu items using the button.

Turns the power off.

Changes the input source.

Adjusts the volume level.

Scrolls through the saved channels.

10