LG 43LF540T, 49LF540T, 49LF541T Owner's Manual [es]

ENGLISH

Easy Setup Guide

Please read this manual carefully before operating your set and retain it for future reference.

ESPAÑOL

Guía Rápida de Configuración

Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas.

X 4 (M4 x L14)

LED TV

43LF540T

43LF5400

43LF541T

43LF5410

49LF540T

49LF5400

49LF541T

49LF5410

www.lg.com

P/NO : MFL68587857 (1502-REV01)

1	1	2
	3	4

2	ENGLISH	Image shown may differ from your TV.
	ESPAÑOL	La imagen puede ser diferente a la de su televisor.
		A
		A	<![if ! IE]> <![endif]>USB IN
		B

B

IN

1

3

4

	5
1	2
3	4

ENGLISH			43LF540T			43LF541T
			(43LF540T-DB)			(43LF541T-DB)
	MODELS		43LF5400			43LF5410
			(43LF5400-DB)			(43LF5410-DB)
			43LF5400			43LF5410
			(43LF5400-SB)			(43LF5410-SB)
	Dimensions (W x H x D)	With stand (mm)		971 x 624 x 198
		Without stand (mm)		971 x 575 x 58.7
	Weight	With stand (kg)			9.8
		Without stand (kg)			9.5
	Power requirement		AC 100 - 240 V ~ 50 / 60 Hz
	Current Value / Power consumption			1.0 A / 60 W
ESPAÑOL
			43LF540T			43LF541T
			(43LF540T-DB)			(43LF541T-DB)
	MODELOS		43LF5400			43LF5410
			(43LF5400-DB)			(43LF5410-DB)
			43LF5400			43LF5410
			(43LF5400-SB)			(43LF5410-SB)
	Dimensiones	Con base (mm)		971 x 624 x 198
	(Ancho x altura x profundidad)	Sin base (mm)		971 x 575 x 58,7
	Peso	Con base (kg)			9,8
		Sin base (kg)			9,5
	Potencia requerida		AC 100 - 240 V ~ 50 / 60 Hz
	Corriente de consumo / Consumo de la potencia			1,0 A / 60 W

ENGLISH			49LF540T		49LF541T
			(49LF540T-DB)		(49LF541T-DB)
	MODELS		49LF5400		49LF5410
			(49LF5400-DB)		(49LF5410-DB)
			49LF5400		49LF5410
			(49LF5400-SB)		(49LF5410-SB)
	Dimensions (W x H x D)	With stand (mm)	1,103 x 698 x 198
		Without stand (mm)	1,103 x 650 x 58.7
	Weight	With stand (kg)		13.4
		Without stand (kg)		13.1
	Power requirement		AC 100 - 240 V ~ 50 / 60 Hz
	Current Value / Power consumption		0.7 A / 70 W
ESPAÑOL
			49LF540T		49LF541T
			(49LF540T-DB)		(49LF541T-DB)
	MODELOS		49LF5400		49LF5410
			(49LF5400-DB)		(49LF5410-DB)
			49LF5400		49LF5410
			(49LF5400-SB)		(49LF5410-SB)
	Dimensiones	Con base (mm)	1 103 x		698 x 198
	(Ancho x altura x profundidad)	Sin base (mm)	1 103 x 650 x 58,7
	Peso	Con base (kg)		13,4
		Sin base (kg)		13,1
	Potencia requerida		AC 100 - 240 V ~ 50 / 60 Hz
	Corriente de consumo / Consumo de la potencia		0,7 A / 70 W

*MFL68587857*

OWNER’S MANUAL

Safety and Reference

LED TV*

* LG LED TVs are LCD TVs with LED backlighting.

Please read this manual carefully before operating your TV and retain it for future reference.

43LF540T	43LF541T	32LF550D	50LF5650	60LF565T
43LF5400	43LF5410	32LF565B	55LF565T	60LF5650
49LF540T	49LF541T	32LF565D	55LF5650	40LF570T
49LF5400	49LF5410			43LF570T

	*MFL68663722*	www.lg.com
		P/NO : MFL68663722 (1502-REV02)

Important Safety Instructions

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

WARNING/CAUTION

RISKOFELECTRICSHOCK

DONOTOPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol within an equilateral triangle is

intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

		The exclamation point within an
		equilateral triangle is intended to alert the
		user to the presence of important operating
	<![if ! IE]> <![endif]>ENGLISH	and maintenance (servicing) instructions in
		the literature accompanying the appliance.
		WARNING/CAUTION
		- TO REDUCE THE RISK OF FIRE AND ELECTRIC
		SHOCK, DO NOT EXPOSE THIS PRODUCT TO
		RAIN OR MOISTURE.
		WARNING
		If you ignore the warning message, you may
		be seriously injured or there is a possibility of
		accident or death.
		CAUTION
		If you ignore the caution message, you may
		be slightly injured or the product may be
		damaged.
		NOTE
		The note helps you understand and use the
		product safely. Please read the note carefully
		before using the product.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

••Do not use this apparatus near water.

••Clean only with a dry cloth.

••Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

••Do not install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

••Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).

••Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it.

2

••Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

••Only use attachments/accessories specified by the manufacturer.

••Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

••Unplug this apparatus during lightning storms or when unused for long periods of time.

••Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

••Do not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.

••Keep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed, induce vomiting and go to the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

••CAUTION concerning the Power Cord (Can differ by country):

Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with

an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

••Warning - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

••Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).

<![if ! IE]>

<![endif]>ENGLISH

3

<![if ! IE]>

<![endif]>ENGLISH

••Grounding

(Except for devices which are not grounded.) Ensure that you connect the earth ground wire to prevent possible electric shock (i.e., a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate

circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightning rods, or gas pipes.

Power

Circuit Supply

Breaker

••As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source even if the unit is turned off.

••Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.

••Outdoor Antenna Grounding

(Can differ by country):

If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

Antenna Lead in Wire

Antenna Discharge Unit

Ground Clamp

(NEC Section 810-20)

Electric Service

Grounding Conductor

Equipment

(NEC Section 810-21)

Ground Clamp

Power Service Grounding

Electrode System

NEC: National Electrical Code

(NEC Art 250, Part H)

••Cleaning

When cleaning, unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners, or benzene.

••Moving

Make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV.

••Ventilation

Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials while plugged. Do not install in excessively dusty places.

••If you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.

••Keep the product away from direct sunlight.

••Never touch this apparatus or antenna during a lightning storm.

••When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

••Do not allow an impact shock, any objects to fall into the product, and do not drop anything onto the screen.

••DISCONNECTING THE DEVICE FROM THE

MAIN POWER

The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.

••Batteries

Store the accessories (battery, etc.) in a safe location out of the reach of children.

••This apparatus uses batteries. In your community there might be regulations that require you

to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.

••Do not dispose of batteries in a fire.

••Do not short circuit, disassemble, or allow the batteries to overheat.

4

••Do not use high voltage electrical equipment near the TV, (e.g., a bug zapper.)

This may result in product malfunction.

••Dot Defect

The panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those

dots are deactivated pixels and do not affect the performance and reliability of the TV.

••Generated Sound

Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

Electrical circuit humming/panel buzzing

A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.

••Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.

••Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

••If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing wrong with TV. Some

minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots.

However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

Preventing Image Burn or Burn-in on Your TV Screen

••If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is image burn or burn-in and not covered by the warranty.

••If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.

••Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD, 1 or more hours for the plasma TV) to prevent image burn.

Preparing

NOTE

	••Image shown may differ from your TV.	<![if ! IE]> <![endif]>ENGLISH
	••Your TV’s OSD (On Screen Display) may differ
	slightly from that shown in this manual.
	••The available menus and options may differ from
	the input source or product model that you are
	using.
	••New features may be added to this TV in the
	future.
	••The items supplied with your product may vary
	depending upon the model.
	••Product specifications or contents of this manual
	may be changed without prior notice due to
	upgrade of product functions.
	••For an optimal connection, HDMI cables and USB
	devices should have bezels less than 10 mm thick
	and 18 mm width.
	••Use an extension cable that supports USB 2.0 if
	the USB cable or USB flash drive does not fit into
	your TV’s USB port.
	••Use a certified cable with the HDMI logo
	attached. If you do not use a certified HDMI
	cable, the screen may not display or a
	connection error may occur.

5

••Recommended HDMI cable types -- High-Speed HDMI®/™ cable

-- High-Speed HDMI®/™ cable with Ethernet

A	A
*A	10 mm
*B	18 mm

CAUTION

	••Do not use any unapproved items to ensure the
	safety and lifespan of the product.
	••Any damages or injuries by using unapproved
	items are not covered by the warranty.
	••Some models appear to have a thin film on the
	screen. It is actually part of the screen; do not
	remove it.
	••When attaching the stand to the TV set, place
	the screen facing down on a cushioned table or
	flat surface to protect the screen from scratches.
	••Make sure that the screws are fastened tightly.
	(If they are not fastened securely enough, the TV
<![if ! IE]> <![endif]>ENGLISH	may tilt forward after being installed.)
	••Do not fasten the screws with excessive force;
	otherwise, they may be worn out and become
	loose.
	Maintenance
	Cleaning your TV
	Clean your TV regularly to keep it at peak
	performance and to extend the product’s lifespan.
	CAUTION
	••Before cleaning, turn the power off and
	disconnect the power cord and all other cables.
	••When the TV is left unattended or unused for a
	long time, disconnect the power cord from the
	wall outlet to prevent possible damage from
	lightning or power surges.
	Screen, frame, cabinet, and stand
	To remove dust or light dirt, wipe the surface with
	a dry, clean, and soft cloth.
	To remove major dirt, wipe the surface with a soft
	cloth dampened in clean water or a diluted mild
	detergent. Then wipe immediately with a dry cloth.

CAUTION

••Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in scratches on the screen and image distortions.

••Do not use any chemicals, such as waxes, benzene, alcohol, thinners, insecticides, air fresheners, or lubricants, as these may damage the screen’s finish and cause discoloration.

••Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or malfunction.

Power cord

Remove the accumulated dust or dirt on the power cord regularly.

Lifting and Moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

••It is recommended to move the TV in the box or packing material that the TV originally came in.

••Before moving or lifting the TV, disconnect the power cord and all cables.

••When holding the TV, the screen should face away from you to avoid damage.

••Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grille area.

6