LG Electronics 19M37A, 27MC37HQ, 24M37D, 27MP37VQ, 27M37D User Manual

ENGLISH

OWNER’S MANUAL

LED LCD MONITOR

Please read this manual carefully before operating your set and retain it for future reference.

LED LCD MONITOR MODEL

19M37A	20M37A	22M37A	24M37A	27M37D
19M37D	20M37D	22M37D	24M37D	27MP37HQ
19M37H	20M37H	22M37H	24M37H	27MP37VQ
	20MP37A	22M37HQ	24M37HQ	27MC37HQ
		22MC37D	24MC37D

www.lg.com

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

ENGLISH

2 TABLE OF CONTENTS

CONTENTS

	3	LICENSE	26	-Color wizard
			27	-DUAL DISPLAY
	4	ASSEMBLING AND PREPAR-	27	-DUAL WEB
		ING	28 TROUBLESHOOTING

4Unpacking

6Parts and buttons

7 Moving and Lifting the Monitor

8Setting up the Monitor set

8- Attaching the Stand Base 9 - Detaching the Stand Base 10 - Mounting on a table

10 - Using the cable holder

12 - Mounting on a wall

30 SPECIFICATIONS‌

40Preset Modes (Resolution)

41Indicator

42PROPER POSTURE

42 Proper posture for using the Monitor set.

13 USING THE MONITOR SET

13Connecting to a PC

13- D-SUB connection

13- DVI-D connection

14- HDMI connection

14Connecting to AV Devices

14- HDMI connection

15Connecting to External Devices

15- Peripheral device connection

16CUSTOMIZING SETTINGS

17Customizing Settings

17 - Menu Settings

19-Picture

20-Color

21-Display

21-Audio

22-Others

23READER Setting

24FUNC. Setting

24-SMART ENERGY SAVING

25-Picture Mode

LICENSE 3

19M37H 20M37H 22M37H 22M37HQ 24M37H 24M37HQ 27MP37HQ 27MP37VQ 27MC37HQ

LICENSE

Each model has different licenses. Visit www.lg.com for more information on the license.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

ENGLISH

The following content is only applied to the monitor which is sold in Europe market and which needs to meet the ErP Directive:

*This monitor is set to be turned off automatically in 4 hours after you turned on display if there is no adjustment to display.

*To make this setting be disabled, change the option to ‘Off’ in OSD menu of “Automatic Standby”.

ENGLISH

4 ASSEMBLING AND PREPARING

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories.

	CD(Owner's Manual) /	D-SUB Cable
		( This cable is not included in all
	Card
		countries. )

Power Cord

AC-DC Adapter

( Depending on the country )

Stand Body

Stand Base

or

AC-DC Adapter

( Depending on the country )

DVI-D Cable

( This cable is not included in all countries. )

HDMI Cable

Stand Body

Stand Base

( This cable is not included in all countries. )

ASSEMBLING AND PREPARING 5

CAUTION

yyDo not use any unapproved accessories to ensure the safety and product life span.

yyAny damages or injuries by using unapproved accessories are not covered by the warranty.

NOTE

yyThe accessories supplied with your product may vary depending on the model.

yyProduct specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.

ENGLISH

6 ASSEMBLING AND PREPARING

Parts and buttons

ENGLISH

19M37A 20M37A 22M37A 24M37A 20MP37A

19M37D 20M37D 22M37D 22MC37D 24M37D 24MC37D 27M37D

Power Indicator yyLightingOn:Turnedon yyLightingOff: Turned off

(Power Button)

Button (See p.16)

19M37H 20M37H 22M37H 24M37H 24M37HQ22M37HQ27MP37HQ27MC37HQ

HDMI IN

27MP37VQ

HDMI IN

Connection panel (See p.13~15)

	ASSEMBLING AND PREPARING 7
Moving and Lifting the Monitor	yyWhen holding the monitor, the screen should
When moving or lifting the monitor, follow these	face away from you to prevent it being
instructions to prevent the monitor from being	scratched.
scratched or damaged and to ensure safe trans-
portation regardless of its shape or size.
yyIt is advisable to place the monitor in the
original box or packing material before at-
tempting to move it.
yyBefore moving or lifting the monitor, discon-
nect the power cord and all cables.
yyHold the top and bottom of the monitor frame	yyWhen moving the monitor, avoid any strong
firmly. Do not hold the panel itself.	shock or vibrations to the product.
	yyWhen moving the monitor, keep it upright,
	never turn the monitor on its side or tilt it
	sideways.

CAUTION

yyAs far as possible, avoid touching the monitor screen. This may result in damage to the screen or some of the pixels used to create images.

ENGLISH

ENGLISH

8 ASSEMBLING AND PREPARING

Setting up the Monitor set

Attaching the Stand Base

1Place the Monitor set with the screen side down on a flat and cushioned surface.

CAUTION

Lay a foam mat or soft protective cloth on the surface to protect the screen from damage.

21 Attach the Stand Body to the monitor set.

2 Attach the Stand Base.

3 Tighten the screw to the right.

19M37A 20M37A 22M37A 24M37A 19M37D 20M37D 22M37D 24M37D 19M37H 20M37H 22M37H 24M37H 20MP37A 22M37HQ 24M37HQ 22MC37D 24MC37D

27M37D 27MP37HQ 27MP37VQ 27MC37HQ

Stand Body

Stand Base

Stand Body

Stand Base

						ASSEMBLING AND PREPARING 9
Detaching the Stand Base						27M37D 27MP37HQ 27MP37VQ 27MC37HQ
1 Place the Monitor set with the screen side					1	Turn the screw to the left.
	down on a flat and cushioned surface.				2	Pull out the Stand Base from the Stand Body.
					3	Remove two screws and pull out the Stand
						Body from the monitor set.
2	19M37A	20M37A	22M37A	24M37A
	19M37D	20M37D	22M37D	24M37D
	19M37H	20M37H	22M37H	24M37H
		20MP37A	22M37HQ	24M37HQ
			22MC37D	24MC37D

1Pull out the Stand Body and Stand Base from the monitor set.

2 Turn the screw to the left.

3 Pull out the Stand Base.

Stand Body

Stand Base

Stand Body

Stand Body

Stand Base

Stand Body

CAUTION

Stand Base

yyThis illustration depicts the general model of connection. Your monitor may differ from the items shown in the picture.

yyDo not carry the product upside down holding only the stand base. The product may fall and get damaged or injure your foot.

ENGLISH

ENGLISH

10 ASSEMBLING AND PREPARING

Mounting on a table

1Lift and tilt the Monitor set into its upright position on a table.

Leave a 10 cm (minimum) space from the wall for proper ventilation.

10 cm

10 cm

10 cm

10 cm

3Press (Power) button on the bottom switch panel to turn the power on.

CAUTION

Unplug the power cord before moving the Monitor to another location. Otherwise electric shock may occur.

Using the cable holder

2 Connect the AC-DC Adapter and Power Cord

to a wall outlet.

Cable holder

or

		ASSEMBLING AND PREPARING 11
	WARNING	Using the Kensington security system
		The Kensington security system connector is
	When you adjust the angle, do not hold the
		located at the back of the Monitor set. For more
	bottom of the Monitor set frame as shown on	information of installation and using, refer to the
	the	manual supplied with the Kensington security
		system or visit http://www.kensington.com.
		Connect the Kensington security system cable
		between the Monitor set and a table.

Do

Do not hold this set like below picture.Monitor

screen can detach from stand base and injure NOTE your body.

The Kensington security system is optional.

You can obtain it from most electronics stores.

NOTE

+20 to -5 degrees up or down to adjust the angle of the Monitor set to suit your view.

ENGLISH

Front Rear

ENGLISH

12 ASSEMBLING AND PREPARING

Mounting on a wall

For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

10 cm

10 cm

10 cm

10 cm

If you intend to mount the Monitor set to a wall, attach Wall mounting interface (optional parts) to the back of the set.

When you install the Monitor set using a wall mounting interface (optional parts), attach it carefully so it will not drop.

1 If you use screw longer than standard, the monitor might be damaged internally.

2 If you use improper screw, the product might be damaged and drop from mounted position.

In this case, LG Electronics is not responsible for it.

Model
		19M37A		20M37A		22M37A		22MC37D
		19M37D		20M37D		22M37D
		19M37H		20M37H		22M37H
				20MP37A		22M37HQ
Wall Mount		75 x 75
(A x B)
Standard		M4
screw
Number of	4
screws

Model	27M37D	27MP37HQ 27MP37VQ
	24M37A	24M37H	27MC37HQ
	24M37D	24M37HQ	24MC37D
Wall Mount (A x B)	100 x 100
Standard screw	M4
Number of screws	4

CAUTION

yyDisconnect the power cord first, and then move or install the Monitor set. Otherwise electric shock may occur.

yyIf you install the Monitor set on a ceiling or slanted wall, it may fall and result in severe injury.

yyUse only an authorized LG wall mount and contact the local dealer or qualified personnel.

yyDo not over tighten the screws as this may cause damage to the Monitor set and void your warranty.

yyUse only screws and wall mounts that meet the VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty.

yyScrew length from outer surface of back cover should be under 8mm.

Wall mount Pad

Back Cover

Wall mount Pad

Back Cover

Standard screw

Max.8mm

NOTE

yyUse the screws that are listed on the VESA standard screw specifications.

yyThe wall mount kit will include an installation manual and necessary parts.

yyThe wall mount bracket is optional. You can obtain additional accessories from your local dealer.

yyThe length of screws may differ depending on the wall mount. Be sure to use the proper length.

yyFor more information, refer to the instructions supplied with the wall mount.

USING THE MONITOR SET 13

USING THE MONITOR SET

Connecting to a PC

yyYour Monitor set supports Plug & Play*.

*Plug & Play: A PC recognizes a connected device that users connect to a PC and turn on, without device configuration or user intervention.

D-SUB connection

Transmits analog video from your PC to the Monitor set. Connect the PC and the Monitor set with the supplied D-sub 15 pin signal cable as shown in the following illustrations.

DVI-D connection

Transmits a digital video signal from your PC to the Monitor set. Connect the PC and the Monitor set with a DVI cable as shown in the following illustrations.

19M37D 20M37D 22M37D 22MC37D 24M37D 27M37D 27MP37VQ24MC37D

D-SUB

ENGLISH

RGB OUT

PC

NOTE

yyWhen using a D-Sub signal input cable connector for Macintosh

yyMac adapter

For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-SUB VGA connector on the supplied cable to a 15 pin 2 row connector.

CAUTION

yyConnect the signal input cable and tighten it by turning the

screws clockwise. yyDo not press the screen with

your finger for a long time as this may result in temporary distortion on the screen.

yyAvoid displaying a fixed image on the screen for a long period of time to prevent image burn. Use a screensaver if possible.