LG 14SA2RB-T2, 14SB1RB Owner’s Manual

0 (0)

OWNER’S MANUAL

Colour Television

Please read this manual carefully before operating your set.

Retain it for future reference.

Record model number and serial number of the set.

See the label attached on the back cover and quote this infor-

mation to your dealer when you require service.

Model number :

Serial number :

P/NO :MFL66987102-EN (MC059D/E)(1010-REV00)

www.lg.com

Contents

Power

This set operates on an AC mains supply, the volt-

age is as indicated on the label on the back cover.

Never apply DC power to the set. In the event of

thunderstorms or powercuts, please pull out the

aerial and mains plugs.

Press the POWER button on the front panel or side panel

to turn off the TV when the TV set is not being used for a

long time.It is recommended to remove the plug from the

wall outlet(Power point).

Disconnecting device from mains

Mains plug is the disconnecting device. The plug

must remain readily operable

Warning

To prevent fire or shock hazard, do not expose the

set to rain or moisture.

Do not place anything containing liquid on top of

the set, this may cause a fire or could give an

electric shock.

Service

Never remove the back cover of the set as this

can expose you to very high voltage and other

hazards. If the set does not operate properly,

unplug it and call your dealer.

Aerial

Connect the aerial cable to the socket on the back

cover. For the best reception an outdoor aerial

should be used.

Location

Position your set so that no bright light or sunlight

falls directly onto the screen. Care should be

taken not to expose the set to any unnecessary

vibration, moisture, dust or heat. Also ensure that

the set is placed in a position to allow a free flow

of air. Do not cover the ventilation openings on the

back cover.

Installation

Installation.........................................................2

Connection of external equipment..................2

Location and function of controls...................3

Basic operation.................................................4

Other functions.................................................4

On screen menus..............................................5

Setting up TV stations......................................5

Picture adjustment............................................6

Time setting.......................................................6

Troubleshooting check list..............................7

Connection of external equipment

Aerial socket

1. Connect the RF out socket of the VCR to the

aerial socket on the back of the set.

2. Connect the aerial cable to the RF aerial in

socket of the VCR.

3. Store the VCR channel on a desired pro-

gramme number using the ‘Manual pro-

gramme tuning’ section.

4. Select the programme number where the

VCR channel is stored.

5. Press the PLAY button on the VCR.

Audio/Video in/out sockets (option)

1. Connect the audio/video out sockets of the

VCR to audio/video in sockets of the set and

in sockets of the VCR to out sockets of the

set.

2. If the VCR is connected to the AV sockets on

the set, press the TV/AV button to select

(or AV1)

3. Press the PLAY button on the VCR.

The VCR playback picture appears on the

screen.

VCR

ANTEN NA

VIDEO

AUDIO

Remote control handset

1. POWER

switches the set on from standby or off to

standby.

2. NUMBER BUTTONS (option)

switches the set on from standby or directly

select a number.

3. MENU

selects a menu.

(Programme Up/Down)

selects a programme or a menu item.

switches the set on from standby.

scans programmes automatically.

(Volume Up/Down)

adjusts the volume.

adjusts menu settings.

accepts your selection or displays the current

mode.

5. Q.VIEW

returns to the previously viewed programme.

6. EYE/

(option)

switches the eye function on or off.

7. SLEEP (option)

sets the sleep timer.

8. MUTE

switches the sound on or off.

9. TV/AV

selects TV or AV mode.

switches the set on from standby.

10. LIST/

(option)

displays the programme table.

11. FAVOURITE /

(option)

selects a favorite programme.

12. I/II/

(option)

selects the language during dual language

broadcast.

selects the sound output.

Battery installation

The remote control handset is powered by AAA

type batteries. To load the batteries, turn the

remote control handset over and open the battery

compartment. Install batteries as indicated by the

polarity symbols ( and ) marked inside the

compartment.

Note : To avoid damage from possible battery

leakage, remove the batteries if you do not plan to

use the remote control handset for an extended

period of time.

Front panel

- MAIN POWER (ON/OFF)

switches the set on or off.

- REMOTE CONTROL SENSOR

Note : Only use the supplied remote control

handset. (When you use others, they’ll be

not able to function.)

- POWER/STANDBY INDICATOR

illuminates brightly when the set is in standby

mode.

dims when the set is switched on.

- MENU

selects a menu.

- OK (option)

accepts your selection or displays the current

mode.

(Volume Up/Down)

adjusts the volume.

adjusts menu settings.

(Programme Up/Down)

selects a programme or a menu item.

switches the set on from standby.

Note :

What is shown here may be somewhat dif-

ferent from your set or can not be supplied

on your area.

Location and function of controls

+ 5 hidden pages