Karcher G2500OH User Manual

G 2500 OH
English ....................... 2
Español .................... 14
Français ................... 26
9.139-176 (10/05)
High Pressure Washer Operator Manual
Overview ........................................................................ 3
Assembly Instructions .................................................. 5
Operating Instructions .................................................. 6
Using the Accessories .................................................. 7
Working with Detergents .............................................. 8
Shut Down and Clean-Up ............................................. 9
Taking a Break ............................................................... 9
Winterizing and Long-Term Storage ............................ 9
Cleaning Tips ......................................................... 10-11
Optional Cleaning Accessories .................................. 11
Troubleshooting ..................................................... 12-13
2
Specifications
Max. pressure 2500 PSI
Water volume 2.4 GPM
Detergent suction 0.15 – 0.20 GPM
Engine 5.0 HP Honda GC 160
Part No. 1.194-512
Serial No. ______________
Kärcher Customer Support USA
Call: 1-800-537-4129 for help or visit our website:
www.karcher-usa.com
Kärcher Customer Service CDN
Call: 1-800-465-4980 for help or visit our website:
www.karcher.ca
Model G 2500 OH OVERVIEW
Item Description
1 Handle 2 Trigger gun 3 Trigger gun safety lock 4 High pressure hose 5 Spray wand 6 Gas tank 7 Dipstick
8 Water inlet with garden hose connector
9 High pressure outlet 10 Detergent filter 11 Detergent suction tube 12 Spark plug 13 Quick connect nozzles
(white, red, green, black)
14 Hose Reel (optional) Mounting Holes
3
IMPORTANT PRECAUTIONS – Read First!
IMPORTANT SAFETY INSTRUCTIONS
WARNING  When using this product ba­sic precautions should always be followed, including the following:
WARNING  Risk of Injection or Injury  Do Not Direct Discharge Stream At Persons.
 Read all the instructions before using the
product.
 Fire hazard! Do not add fuel with the en-
gine running. Do not operate if fuel has been spilled. Instead, move the machine to a different location and avoid creating sparks.
 Operate and fuel machine in a well venti-
lated area, free of devices featuring an open pilot or flame such as boilers, wa­ter heaters, etc.
 High pressure jets can be dangerous if
subject to misuse. The jet must not be directed at persons, animals, electrical devices, or the machine itself.
4
 Wear safety goggles.  Do not use acids, alkaline, solvents, or
any flammable material in this product. These products can cause physical inju­ries to the operator and irreversible da­mage to the machine.
 The machine has hot surfaces which can
cause burns. Operate the unit in a safe environment and away from children.
 Do not allow the high pressure hose to
come into contact with the muffler guard.
 Do not leave the machine running unat-
tended.
 Learn how to stop the machine and re-
lease pressure quickly. Be thoroughly fa-
miliar with the controls.  Stay alert  watch what you are doing.  Do not operate the product when fatigued
or under the influence of alcohol or drugs.  Do not stand on unstable surfaces. Stand
with both feet balanced at all times.  Avoid tipping the machine on its side.
 The Gun Safety Lock PREVENTS the
trigger from accidentally being engaged. This safety feature DOES NOT lock trig­ger in the on position.
 Do not spray electrical connections, elec-
trical outlets or fixtures.
 Do not touch hot surfaces or allow acces-
sories to contact hot surfaces.
 Do not operate in an enclosed space, ex-
haust fumes are dangerous.
 Do not operate near utilities with open fla-
mes.
 Do not operate pressure washer without
the water turned on.
 Do not use hot water.
WATER SUPPLY (Cold Water Only)
 Water hose must be at least 5/8 inch in
diameter.
 Flow rate of water supply must not fall
below 2.6 GPM (gallons per minute).
 Flow rate can be determined by running
the water for one minute into an empty 5-gallon container.
 The water supply temperature must not
exceed 104°F/40°C.
 Never use the pressure washer to draw
in water contaminated with solvents, e.g. paint thinner, gasoline, oil, etc.
 Always prevent debris from being drawn
into the unit by using a clean water source.
We strongly recommend that this high pres­sure washer not be left running for periods of 5 minutes or longer without the trigger gun being engaged.
- SAVE THESE INSTRUCTIONS -
Loading...
+ 9 hidden pages