(Revised issue 1) |
(Page.1/2) |
Service Bulletin |
Ref. No. COM-0200 (A324) |
[Service Information] |
<Date> January 12 2012 |
Subject
Note When Replacing/Reassembling the HOLDER DU and the
STAY DU
FS-1300D, FS-1350DN, FS-1120D, FS-1320D, FS-1370DN, Model FS-1028MFP, FS-1128MFP
(-->) FS-1030MFP, FS-1130MFP, FS-1035MFP, FS-1135MFP
This time, the description with (-->) was revised from the previous information. <Number of changes: 4> The affected models were added.
Topic
The HOLDER DU (No.2) and the STAY DU (No.3) are no more supplied as individual parts since adjustment is required after assembling.
If the HOLDER DU/STAY DU must be replaced, please use the assembly part (No.1) instead of the parts above.
Precaution
In case of replacing/reassembling the HOLDER DU/STAY DU individually, the paper skew may occur depending on the adjustment.
STAY DU (No.3) -->
No more supplied.
SHAFT PULLEY (X)
PULLEY MID(Y)
HOLDER DU (No.2)
--> No more supplied.
HOLDER DU ASSY (No.1)
KYOCERA MITA Europe B.V.
European Service & Development Center (ESDC)