Juki LU2828V-7 Parts Book

0 (0)

LU-2828V-7

PARTS LIST

No.1710-00

HOW TO MAKE USE OF THIS PARTS LIST

1.As to "#01" and "#02" refer to the "Note" given at the bottom of the respective pages. 2.Codes on the "Qty" column

Each numeral indicates the number of parts required.

"0.1" and "2.5" indicate the length (in meters) of the respective parts.

3.Parentheses mean that the corresponding part is a subpart that constructs an assembly part. 4.Dotted lines on the Figures indicate assembly parts.

5.As to the parts with marks of " "(Consumable parts)and " "(optional parts)on the respectie parts, it is recommended to prepare spares.

. #01 #02 " "

. 0.1 2.5

. " " " "

CONTENTS

1. FRAME & MISCELLANEOUS COVER COMPONENTS .....................................................................................................	1

2. MAIN SHAFT & THREAD TAKE-UP LEVER COMPONENTS ............................................................................................	3

3. NEEDLE BAR COMPONENTS............................................................................................................................................	5

4. LOWER SHAFT COMPONENTS.........................................................................................................................................	7

5. OPENNER COMPONENTS.................................................................................................................................................	9

6. HOOK COMPONENTS......................................................................................................................................................	11

7. UPPER FEED COMPONENTS..........................................................................................................................................	13

8. AUTO LIFTER COMPONENTS.........................................................................................................................................	15

9. LOWER FEED COMPONENTS.........................................................................................................................................	17

10. FEED ADJUST COMPONENTS......................................................................................................................................	19

11. SWITCH UNIT COMPONENTS.......................................................................................................................................	21

12. OPERATION PANEL COMPONENTS.............................................................................................................................	22

13. THREAD CUTTING COMPONENTS...............................................................................................................................	23

14. THREAD TENSION COMPONENTS...............................................................................................................................	25

15. NEEDLE THREAD CLAMP COMPONENTS...................................................................................................................	27

16. BOBBIN WINDER COMPONENTS .................................................................................................................................	28

17. LUBRICATION COMPONENTS ......................................................................................................................................	29

18. THREAD STAND COMPONENTS...................................................................................................................................	31

19. BOTTOM COVER COMPONENTS .................................................................................................................................	32

20. SMART DEVICE COMPONENTS(1) ...............................................................................................................................	33

21. SMART DEVICE COMPONENTS (2) ..............................................................................................................................	35

22. ACCESSORIES PARTS COMPONENTS........................................................................................................................	37

NUMERICAL INDEX OF PARTS........................................................................................................................................	39

1. FRAME & MISCELLANEOUS COVER COMPONENTS

- 1 -

REF.NO		NOTE		PART NO	D E S C R I P T I O N			Qty

1			401-92972		FACE_PLATE		1
2				SM-4051055-SP	SCREW		3
3			401-72374		FACE_COVER_PLATE		1
4			401-92342		PUSH_BUTTON		1
5				RO-0601501-00	O-RING		1
6			401-92973		TOP_COVER		1
7				SM-4051055-SP	SCREW		7
8			401-91756		TOP_COVER_PACKING		1
9			401-91650		PRESSER_SPRING_COVER		1
10				SM-4051055-SP	SCREW		2
11			401-92404		THREAD_TAKE_UP_LEVER_COVER		1
12				SM-4051055-SP	SCREW		1
13			401-92974		APERRTURE_COVER		1
14				PS-0300142-KH	SPRING PIN 3X14		2
15				SM-4051055-SP	SCREW		4
16			401-92341		APERTURE_COVER_PACKING		1
17			401-92975		MOTOR_COVER		1
18				SM-4055501-SC	SCREW M5X0.8 L=55		4
19			401-31625		AUXILIARY_COVER		1
20				SM-1040750-TP	SCREW M4 L=7		2
21			401-47918		SLIDE_PLATE_FRONT		1
22				SM-8040412-TP	SCREW M4X4		3
23				B1111-051-00B	SPRING		1
24			401-27056		SLIDE_PLATE_2860R		1
25	#02		401-47944		SLIDE_PLATE_2810R		1
26	#03		401-62128		SLIDE_PLATE_METOBI_2828_TRIM		1
27				B1111-563-000	BED SLIDE SPRING		1
28				SM-4040655-SP	SCREW M4 L=6		2
29			401-90399		THROAT_PLATE_2828A		1
30				SM-1051052-TN	PLATE SCREW M5 L=10		2
31			401-91846		REVERSE_FEED_LEVER_CAP_A		1
32			401-86360		INT PCB ASSY		1
33				HX-0033900-0E	SPACER		4
34				SL-6040892-TN	SCREW M4 L=8		4
35			401-92502		INT_PCB_COVER		1
36				HX-0009600-00	EDGING		0.062
37			401-92443		POWER LAMP ASSY		1
38			401-92402		LED_BRACKET		1
39				SM-6040602-TP	SCREW M4X0.7 L=6		1
40			401-92444		STANDBY SWITCH ASSY		1
41			401-92403		AMP_BRACKET		1
42				SL-6040892-TN	SCREW M4 L=8		2
43			401-91289		GUIDE_PLATE		1
44				SL-4041091-SC	SCREW M4 L=10		1
45				SM-4050655-SP	SCREW M5 L=6		1
46			401-69689		THREAD_GUIDE_A		1
47			401-69642		THREAD_GUIDE_B		1
48				SM-1040750-TP	SCREW M4 L=7		2
49			401-26221		THREAD__GUIDE		1
50				SM-4040655-SP	SCREW M4 L=6		1
51				TA-1650406-R0	PRUG		2
52				TA-1030402-R0	RUBBER PLUG D=10.3 L=4		1
53				TA-1250406-R0	RUBBER PLUG D=12.5 L=4		1
54				TA-1650406-R0	PRUG		1
55	#02		401-74385		GROUND WIRE ASM.		1
56	#01		401-92464		GROUND WIRE T ASM.		1
57				SM-4050655-SP	SCREW M5 L=6		1
58	#01		401-92579		EARTH CORD ASSY		1
59	#01			SL-4040881-SC	SCREW M4 L=8		1
60				HX-0029200-0A	CABLE BAND		2
61				D2112-555-B00	CORD HOLDER		1
62				HX-0015000-0A	CABLE CLAMP		1
63				HX-0015000-0D	CABLE CLAMP		2
64				HX-0015000-0M	CABLE CLAMP		2
65			400-28877		FACE_COVER_CAP		1
66				SM-4040855-SP	SCREW		1
67				SL-4041091-SC	SCREW M4 L=10		4
68				EA-9500B00-00	CABLE BAND		7
69				EA-9500B02-00	CABLE BAND		4
70				HX-0006500-0C	CABLE BAND		1
71			401-72375		EMBLEM_JUKI_SMART_SOLUTIONS	S	1
72			401-02261		SAFETY_LABEL_S		1
73				CM-3002000-01	FINGER INJURY CAUTION LABEL (16)		4
74			229-01805		GROUND MARK		1
75	#01		229-01805		GROUND MARK		1
76	#01			CM-6001001-01	WEEE MARK LABEL S		1
77	#01		401-50131		EAC_MARK_LABEL_S		1
				NOTE( )	#01....FOR JE
					#02....FOR STANDARD
					#03....FOR SMART DEVICE

- 2 -

2.MAIN SHAFT & THREAD TAKE-UP LEVER COMPONENTS

- 3 -

REF.NO		NOTE PART NO		D E S C R I P T I O N		Qty

1	401-12087			MAIN_SHAFT_DD	1
2	401-92347			HAND_WHEEL	1
3			SM-80608A2-TP	SCREW M6 L=8	2
4	401-69647			SERVO_MOTOR_800W	1
5			SL-6052092-TN	SCREW M5 L=20	4
6			SB-1200018-00	BEARING	1
7	401-92409			MAIN_SHAFT_BEARING_SUPPORT	1
8			SM-80608A2-TP	SCREW M6 L=8	2
9	401-43083			BEARING	1
10	401-12274			TIMING_BELT	1
11			SM-80608A2-TP	SCREW M6 L=8	2
12	401-26321			SPROCKET_UPPER	1
13	401-43088			BEARING	1
14	401-92390			BTW_DRIVING_WHEEL	1
15			SM-8050412-TP	SCREW M5 L=4	2
16	401-12312			COUPLING_ASSY	1
17	401-30277			HUB_L	(1)
18	401-12106			HUB_R	(1)
19	401-25950			SPIDER	(1)
20			SM-8050812-TP	SCREW M5X8	(4)
21	401-12091			COUNTER_WEIGHT	1
22			SM-8060612-TP	SCREW M6 L=6	2
23			SM-8080812-TP	SCREW M8X8	2
24			WP-0820516-SP	WASHER 11.6X8.2X0.6	1
25			SM-8060812-TP	SCREW M6 L=8	2
26	401-82477			THREAD_TAKE_UP_COMP_L	1
27	401-43077			TAKE_UP_CRANK_ASM	(1)
28	400-11902			THREAD_TAKE_UP_CRANK_SHAFT	(1)
29	401-25930			TAKE_UP_LEVER_CRANK	(1)
30	107-21504			FEED ADJUSTING PIN	(1)
31	401-82476			THREAD_TAKE_UP_ASM_L_B	(1)
32	401-12092			NEEDLE_BAR_CRANK	(1)
33	401-82475			NEEDLE_BAR_CRANK_ROD_COMP	(1)
34			SB-1080024-00	BEARING	(1)
35	401-82474			NEEDLE_BAR_CRANK_ROD_ASM	(1)
36	401-81687			NEEDLE_BAR_CRANK_ROD	(1)
37	401-12094			CRANK_ROD_BUSH	(1)
38	401-60242			THREAD_TAKE_UP_ASM_L_A	(1)
39			SB-1080024-00	BEARING	(1)
40	401-34545			THREAD_TAKE_UP_ASM	(1)
41	401-34532			THREAD_TAKE_UP	(1)
42	105-46901			BUSH	(1)

- 4 -

3.NEEDLE BAR COMPONENTS

３９

- 5 -

REF.NO		NOTE PART NO			D E S C R I P T I O N				Qty

1			401-69656		N_B_ROCKING_BASE_ASM_2800ES			1
2			401-69659		N_B_ROCKING_BASE_ASM_ES	( )		(1)
3			401-69657		NEEDLE_BAR_2800ES			(1)
4			401-69658		NEEDLE BAR CONNECTION			(1)
5				SS-7090910-TP	SCREW 9/64-40 L=8.5			(1)
6				WP-0371036-SD	WASHER 3.7X6X1			(1)
7			401-12152		NEEDLE_ROD_SQUARE_BLOCK			(1)
8			401-27041		NEEDLE_BAR_GUIDE			(1)
9				SM-6040650-TP	SCREW			(2)
10			401-12272		NEEDLE_BAR_FELT_E			1
11			401-12270		FELT_HOLDER			1
12				SM-4050501-SC	SCREW M5X0.8 L=5			1
13			401-43221		NEEDLE_BAR_THREAD_GUIDE_2810A			1
14				SS-2060310-SP	SCREW 3/32-56 L=3			1
15				SS-8080410-TP	SCREW 1/8-44 L=3.5			1
16				CQ-2520000-00	COTTON OIL WICK D=2.5			0.05
17				CS-1701181-TP	THRUST COLLAR D=17 W=11			1
18				SM-8060612-TP	SCREW M6 L=6			2
19	#01		401-71403		NEE_BAR_ROCKING_SHAFT_B_BUSHING		1
20	#01		401-69649		NEE_BAR_ROCKING_SHAFT_B_BUSHING		1
21	#01		401-69650		NEE_BAR_ROCKING_SHAFT_B_BUSHING		1
22	#01		401-74557		NEE_BAR_ROCKING_SHAFT_B_BUSHING		1
23	#01		401-74558		NEE_BAR_ROCKING_SHAFT_B_BUSHING		1
24	#01		401-69652		NEE_BAR_ROCKING_SHAFT_F_BUSHING		1
25	#01		401-69653		NEE_BAR_ROCKING_SHAFT_F_BUSHING		1
26	#01		401-69654		NEE_BAR_ROCKING_SHAFT_F_BUSHING		1
27	#01		401-74559		NEE_BAR_ROCKING_SHAFT_F_BUSHING		1
28	#01		401-74560		NEE_BAR_ROCKING_SHAFT_F_BUSHING		1
29			401-69651		ROCKING_SHAFT_PLASTIC_BUSHING			2
30		#01 B1438-512-B00			WASHER 17.1X28X1.5			1
31	#01		226-06206		SPACER Y			1
32	#01		226-06305		SPACER Z			1
33	#01		226-07600		SPACER A			1
34	#01		226-07709		SPACER B			1
35	#01		226-07808		SPACER D			1
36	#01		226-07907		SPACER E			1
37	#01		226-06404		SPACER F			1
38				TA-0620504-R0	CAP			1
39				TA-0500301-R0	PLUG 5X5.8 L=3			4
40				MC-3210014-00	NEEDLE 134-35 #140			1
41			401-78188		O-RING			4
				NOTE( )	#01....SELECTIVE PARTS

- 6 -

4.LOWER SHAFT COMPONENTS

- 7 -

REF.NO		NOTE		PART NO	D E S C R I P T I O N			Qty

1			401-89275		HOOK_SHAFT_BASE_RIGHT_TC_2828ES		1
2			401-69662		LOWER_SHAFT_C		1
3			401-43082		BEARING		1
4				SM-6041050-SN	SCREW M4 L=10		1
5			401-69664		CONNECTING_COLLAR		1
6				SM-6051202-TP	SCREW M5X0.8 L=12		2
7				SM-80606A2-TP	SCREW M6 L=6		2
8				SB-1200018-00	BEARING		2
9			401-69668		BEARING_COLLAR	_	2
10				SM-8060812-TP	SCREW M6 L=8		2
11			401-69673		SAFETY CLUTCH DISC		1
12				SM-80606A2-TP	SCREW M6 L=6		2
13				RE-0500000-K0	E-RING		1
14				B1639-051-000	SPRING		1
15			401-12240		SAFETY_REVERSE_BUTTON		1
16			401-69667		LOWER_SHAFT		1
17				SM-80606A2-TP	SCREW M6 L=6		2
18			401-78330		SAFETY_BASE_BUSHING		1
19			401-69671		LOWER_SHAFT_SPROCKET		1
20			401-23340		HOOK_SHAFT_BASE_SIDE_PLATE		1
21				SM-6040602-TP	SCREW M4X0.7 L=6		2
22				SM-6040502-TP	SCREW M4X0.7 L=5		1
23				B3538-112-000	OIL RETURN TUBE HOLDER		1
24				SM-6040650-TP	SCREW		2
25			401-26372		LOWER_SHAFT_GEAR		1
26				SM-80506A2-TP	SCREW M5 L=6		2
27			401-43084		BEARING		1
28				D1231-555-B00	WASHER		1
29				RE-1200000-K0	E-RING 12		1
30			401-39043		HOOK_SHAFT_BASE_WASHER_2810		2
31				SM-6061802-TP	SCREW M6 L=18		2
32			401-69666		HOOK_SHAFT_GEAR		1
33				SM-8050412-TP	SCREW M5 L=4		2
34			401-69665		HOOK_SHAFT		1
35				SB-1080006-00	BEARING		2
36				RC-2400002-KP	C-RING 24 (25.9)		2
37				RC-0740816-K0	C-RING 8 (7.4)		1
38	#01			B2557-280-00A	WASHER FOR DRIVING ARM		1
39	#01			B2557-280-00B	WASHER		1
40	#01			B2557-280-00C	WASHER		1
41	#01			B2557-280-00D	WASHER D		1
42	#01			B2557-280-00E	WASHER		1
43	#01		401-38418		WASHER_T=1.3		1
44	#01		401-38419		WASHER_T=1.4		1
45	#01		401-38420		WASHER_T=1.5		1
46	#01		401-38421		WASHER_T=1.6		1
47	#01		401-38422		WASHER_T=1.7		1
48	#01		401-38423		WASHER_T=1.8		1
49	#01		401-43185		WASHER_T=0.5		1
50	#01		401-43188		WASHER_T=0.6		1
51	#01		401-43581		WASHER_T=0.7		1
52			401-26382		HOOK_SHAFT_COLLAR		1
53			213-87709		SAFETY CLUTCH SPRING		1
54			401-76783		SAFETY BASE		1
55			213-87907		ADJUSTING PIN (1.2)		1
56			401-69669		SAFETY_CLUTCH_HOOK		1
57			401-69672		CLUTCH_BASE		1
58			401-86642		SAFETY_CLUTCH_COUNTER_HOOK_ES		1
59				B1310-055-000	SAFETY CLUTCH SMALL LINK		1
60				B1314-055-000	SAFETY CLUTCH SMALL LINK PIN		1
61			401-13224		COUNTER HOOK SPRING		1
62				SD-0640322-TP	SHOULDER SCREW D=6.35 H=3.2		2
63				SM-1061201-SN	SCREW M6 L=12		2
64				SS-8111010-TP	SCREW 11/64-40 L=9.5		1
65				SM-80606A2-TP	SCREW M6 L=6		2
				NOTE( )	#01....SELECTIVE PARTS

- 8 -

5.OPENNER COMPONENTS

- 9 -

REF.NO		NOTE PART NO		D E S C R I P T I O N		Qty

1	401-26351			OPENER_CAM_ROLLER	1
2			RC-0560711-KP	C-RING 6(5.6)	1
3	401-47915			OPENER_ASM_XXL	1
4	401-35473			OPENER_METAL	1
5			WP-0740516-SP	WASHER_7.4X11.8X0.5	1
6	401-26391			OPENER_CAM_R	1
7	401-26360			OPENER_CAM_ROLLAR_SHAFT	1
8	401-35475			OPENER_DRIVING_ARM	1
9	401-35472			OPENNER_SLEEVE	1
10			WP-0612066-SP	WASHER_6.1X11X2	1
11			SM-6040802-TP	SCREW_M4X0.7_L=8	1
12			SM-8040612-TP	SCREW_M4_L=6	1
13			SM-8060612-TP	SCREW_M6_L=6	2
14			SM-8050612-TP	SCREW_M5X6	2
15	401-12252			OPENER_METAL	1

- 10 -

+ 32 hidden pages