JUKI LU-1561N-7 Parts List

0 (0)

LU-1561N/1561N-7

PARTS LIST

No.1339-08

HOW TO MAKE USE OF THIS PARTS LIST

1.Explanation of codes

1)"*"mark	............means this part is changed from the previous parts book.
	As to the details of the change, refer to the "List for information of change".
2)"#01".................	refer to "Note" explanation at bottom of page.

2.Codes on the "Qty" column

Each numeral indicates the number of parts required.

"0.1" and "2.5" indicate the length (in meters) of the respective parts.

3.Parentheses mean that the corresponding part is a subpart that constructs an assembly part. 4.Dotted lines on the Figures indicate assembly parts.

." "" " ...............

" ""#01"...................... " "

. 0.1 2.5


1.	FRAME & MISCELLANEOUS COVER COMPONENTS....................................................................................................		1

2.	UPPER SHAFT,LOWER SHAFT DRIVING & BALANCE COMPONENTS ........................................................................		3

3.	NEEDLE BAR ROCKING COMPONENTS.........................................................................................................................		5

4.	PRESSURE ADJUSTING & UPPER FEED MECHANISM COMPONENTS......................................................................		7

5.	FEED MECHANISM COMPONENTS.................................................................................................................................		9

6.	HOOK SHAFT & LOWER SHAFT COMPONENTS..........................................................................................................		11

7.	THREAD CUTTING COMPONENTS (FOR LU-1561N-7) ................................................................................................		13

8.	AUTOMATIC BACK COMPONENTS (FOR LU-1561N-7)................................................................................................		15
	( )
9.	THREAD TENSION COMPONENTS................................................................................................................................		16

10.		THREAD RELEASE COMPONENTS (FOR LU-1561N-7)..............................................................................................	17
	( )
11.		KNEE LIFTING COMPONENTS.....................................................................................................................................	18

12.		LOWER THREAD WINDER MECHANISM COMPONENTS..........................................................................................	19

13.		AUTOMATIC PRESSER LIFTING MECHANISM COMPONENTS (FOR LU-1561N-7).................................................	20
	( )
14.		AIR MECHANISM COMPONENTS (FOR LU-1561N-7).................................................................................................	21
	( )
15.		LUBRICATION COMPONENTS .....................................................................................................................................	23

16.		GAUGE COMPONENTS.................................................................................................................................................	25

17.		THREAD STAND COMPONENTS..................................................................................................................................	27

18.		BELT COVER & OIL RESERVOIR COMPONENTS ......................................................................................................	29

19.		AUTOMATIC BACK COMPONENTS (OPTIONAL PARTS)...........................................................................................	31

20.		AUTOMATIC PRESSER LIFTING MECHANISM COMPONENTS (OPTIONAL PARTS)..............................................	33

21.	OPTIONAL PARTS (ADDITIONAL SPRING FOR PRESSER BAR) COMPONENTS ...................................................	35

22.	DL MECHANISM COMPONENTS (OPTIONAL PARTS) ...............................................................................................	36

23.	SUSPENSION SQUARE COMPONENTS (OPTIONAL PARTS) ...................................................................................	37

24.	ACCESSORIES PARTS COMPONENTS.......................................................................................................................	38

25.	TABLE OF EXCHANGING GAUGE PARTS...................................................................................................................	39

26. LIST FOR INFORMATION OF CHANGE.........................................................................................................................		40

NUMERICAL INDEX OF PARTS........................................................................................................................................		41

1.FRAME & MISCELLANEOUS COVER COMPONENTS

5 6

			4 1
		5 6	5 4
		5 6
			5 5	4 2
			5 5	1 0
				1 0
		1 4
		1 2		4
		1 2	9	5
1 1	8		9	5
1 1	8	1 3	7
		1 3	6
			6

			1 9
			1 8	6 0	6 1 4 7		5 8
							5 8


		1 5	6 7	5 0	5 9
		1 5	6 7	5 0	6 4	4 6
	3 8				4 8	4 6	5 7
					4 8		5 7

			4 8	1 5	6 6
1 7	1 6	3 7 3 6		3 7 3 6
		3 7 3 6
							4 0

			3 1
	1		3 0	3 8
			3 0

2
			4 9
6 5					2 2	4 5
					2 3	4 5
						3 5
2				6 2	2 0	3 4
					2 0
					2 1
					2 1
			3 2	5 2	6 2
			3 3	5 2	6 2
			3 3
3			4 4	5 3		6 3
3			4 4

		3 9	4 3	5 1
			4 3	5 1	2 9
				2 5	2 9
				2 6
				2 7
				2 4	2 8
				2 4

- 1 -

REF.NO		NOTE		PART NO	D E S C R I P T I O N			Qty

1			400-16798		FACE PLATE ASM.		1
2				SS-4111215-SP	SCREW 11/64-40 L=12		2
3			401-52631		LUBRICATION SUPPLEMENT		1
4			213-31301		TOP COVER B		1
5				SS-4110815-SP	SCREW 11/64-40 L=8		6
6			213-55904		ARM THREAD GUIDE		1
7				SS-7621040-SP	SCREW 3/16-32 L=9.5		2
8	#01		213-31756		WINDOW PLATE A ASM.		1
9	#01			TA-1450404-R0	RUBBER PLUG D=14.5 L=4		1
10	#02			D2112-555-B00	CORD HOLDER LARGE		1
11	#01		213-31202		SETSCREW		1
12	#01		213-31806		WINDOW PLATE B		1
13	#01		213-32002		WINDOW PLATE PACKING B		1
14	#01			SS-4110815-SP	SCREW 11/64-40 L=8		5
15	#01			TA-1250504-R0	RUBBER PLUG		2
16	#01		213-32309		SIDE COVER		1
17	#01			SS-4110815-SP	SCREW 11/64-40 L=8		1
18			213-31608		BALANCE COVER		1
19				SS-7150910-TP	SCRE 15/64-28 L=9		1
20			401-08674		THREAD GUIDE		1
21				SS-5090610-SP	SCREW 9/64-40 L=6		1
22			401-08675		FRAME THREAD GUIDE	( )	1
23				SS-2090710-TP	SCREW 9/64-40 L=7.2		1
24			214-08554		THREAD GUIDE ASM.		1
25			214-08505		THREAD GUIDE PLATE		(1)
26			179-12106		NEEDLE THREAD PRESSER PLATE		(1)
27				B1132-521-000	THREAD PRESSER PLATE SPRING		(1)
28				SD-0380551-SL	HINGE SCREW D=3.80 H=5.5		(1)
29				SS-2090710-TP	SCREW 9/64-40 L=7.2		1
30			226-51202		AUXILIARY COVER		1
31				SS-2090710-TP	SCREW 9/64-40 L=7.2		2
32				B3138-512-000	TAKE-UP SPRING ADJUSTING PLATE		1
33				SS-7090520-TP	SCREW 9/64-40 L= 4.5		1
34				B1111-563-000	BED SLIDE SPRING		1
35				SS-4110515-SP	SCREW 11/64-40 L=5		2
36	#02			HX-0012300-0A	CABLE CLIP		2
37	#02			SS-4110815-SP	SCREW 11/64-40 L=8		2
38				TA-0620504-R0	CAP		2
39				SS-6151210-SP	SCREW 15/64-28 L=12		2
40				CM-3013000-01	SAFETY LABEL		1
41	#03		213-48909		WIDOW PLATE D		1
42	#02			SS-4110815-SP	SCREW 11/64-40 L=8		1
43				SS-4110815-SP	SCREW 11/64-40 L=8		1
44			213-61407		BED SUPPORT PLATE		1
45				TA-1050504-R0	RUBBER PLUG		1
46				TA-0550604-R0	RUBBER PLUG		2
47	#02		229-51552		GROUND WIRE ASM.		1
48				TA-0750704-R0	RUBBER PLUG		2
49				CM-3002000-01	ATTENTION SEAL		1
50			229-01805		GROUND MARK		1
51			213-32200		OIL SHIELD (LEFT)		1
52	#01		228-77609		DUST COVER		1
53	#01			SS-4110815-SP	SCREW 11/64-40 L=8		1
54	#02		401-07950		WINDOW PLATE C		1
55	#02		213-32101		WINDOW PLATE PACKING C		1
56	#02			SS-4110815-SP	SCREW 11/64-40 L=8		6
57			226-19100		CAP		1
58			102-01200		RUBBER PLUG		1
59	#02			TA-0550604-R0	RUBBER PLUG		1
60	#02			SS-6111140-SP	SCREW 11/64-40 L=11		1
61	#02			WT-0530002-KS	TOOTHED WASHER D=5.3		1
62			226-02601		BED SCREW STUD		2
63	#02			EA-9500B01-00	CABLE BAND		2
64				TA-1250504-R0	RUBBER PLUG		1
65				SS-4150915-SP	SCREW 15/64-28 L=9		1
66	#02			TA-1250504-R0	RUBBER PLUG		1
67	#02		106-22009		COAD BUSH		1
				NOTE( )	#01....FOR LU-1561N
					#02....FOR LU-1561N-7
					#03....OPTIONAL PARTS

- 2 -

2.UPPER SHAFT,LOWER SHAFT DRIVING & BALANCE COMPONENTS

- 3 -

REF.NO			NOTE		PART NO	D E S C R I P T I O N			Qty

1				213-32705		UPPER SHAFT		1
2				213-33000		UPPER SHAFT FRONT METAL		1
3					B1905-520-000	THREAD TAKE-UP LEVER		1
4					B1906-051-000	TAKE-UP LEVER PIN		1
5					B1907-057-000	THRUST PIN		1
6					SS-8150822-TP	SCREW 15/64-28 L=8		2
7				213-39106		NEEDLE BAR CRANK ROD		1
8					CQ-3030000-00	OIL WICK		0.45
9					CQ-2020000-00	OIL WICK		0.03
10					B1210-051-000	NEEDLE BAR CRANK PIN		1
11					CQ-5050000-00	OIL WICK		0.03
12				213-32507		COUNTER WEIGHT (A) (36MM)		1
13					SS-8150822-TP	SCREW 15/64-28 L=8		2
14					SM-8080812-TP	SCREW M8X8		2
15		#03		401-97297		UPPER_FEED_CAM_ASM		1
16					SS-8660810-TP	SCREW 1/4-40 L=8		(2)
17				213-33109		UPPER SHAFT INNER METAL		1
18					CQ-2020000-00	OIL WICK		0.15
19					SS-8150710-TP	SCREW 15/64-28 L=7		1
20				401-97296		HORIZONTAL_FEED_ROD_ASM		1
21					SS-8660810-TP	SCREW 1/4-40 L=8		(2)
22				213-53008		HORIZONTAL FEED CAM COVER		(1)
23					SS-7110710-SP	SCREW 11/64-40 L=7		(2)
24				213-87402		FELT		(1)
25				226-04300		TIMING BELT		1
26				401-43083		BEARING		1
27				214-02300		UPPER SHAFT BEARING HOOK		1
28					SM-8060602-TP	SCREW M6X6		2
29	#02				SS-4110815-SP	SCREW 11/64-40 L=8		1
30					SS-8150822-TP	SCREW 15/64-28 L=8		2
31				213-87501		LOWER SPROCKET		1
32					B1214-019-000	SPROCKET RING		1
33				213-87709		SAFETY CLUTCH SPRING		1
34				213-87600		SAFETY CLUTCH HOOK		1
35					B1308-055-000	SAFETY CLUTCH COUNTER-HOOK		1
36				401-13224		COUNTER HOOK SPRING		1
37					B1310-055-000	SAFETY CLUTCH SMALL LINK		1
38				213-87808		SAFETY BASE		1
39					B1314-055-000	SAFETY CLUTCH SMALL LINK PIN		1
40					SS-8660612-TP	SCREW 1/4-40 L=6		2
41					SD-0640322-TP	HINGE SCREW D=6.35 H=3.2		1
42					SD-0640322-TP	HINGE SCREW D=6.35 H=3.2		1
43					SS-8111010-TP	SCREW 11/64-40 L=9.5		1
44	#01				B1312-563-000-A	SAFETY CLUTCH PUSH BUTTON		1
45	#02			401-04367		SAFETY CLUTCH PUSH BUTTON		1
46					RE-0500000-K0	E-RING		1
47					B1639-051-000	SPRING		1
48					B1313-055-000	SAFETY CLUTCH KNOB SLEEVE		1
49	#01				SS-8150710-TP	SCREW 15/64-28 L=7		2
50	#02				SS-8660530-TP	SCREW 1/4-40 L=4.5		2
51				400-38700		THRUST COLLAR ASM.		1
52				400-38702		THRUST COLLAR		(1)
53					SS-8661030-SP	SCREW 1/4-40 L=10		(2)
54					SB-1200002-00	BEARING 20X42		(1)
55					SS-7120760-SP	SCREW 3/16-28 L=7.0		2
56				400-16148		THRUST COLLAR B WASHER		1
57	#02			226-06206		SPACER Y		1
58	#01			213-33406		BALANCER		1
59	#01				SS-8151550-SP	SCREW 15/64-28 L=15		2
60	#02			213-33901		SAFETY CLUTCH DISC		1
61	#01			213-34008		FLYWHEEL		1
62				214-27059		FLYWHEEL ASM.		1
63				214-27000		FLYWHEEL		(1)
64					SS-8150822-TP	SCREW 15/64-28 L=8		(2)
65					M4007-110-0AA	MAGNET FITTING BASE A ASM.		(1)
66					M4007-110-0AB	MAGNET FITTING BASE B ASM.		(1)
67					WP-0450801-SD	WASHER 4.5X10X0.8		(2)
68					SS-6111210-SP	SCREW 11/64-40 L=12		(2)
69				213-87907		ADJUSTING PIN (1.2)		1
70	#02			400-24855		CONTAIN SYNCHRO ASM.		1
71	#02			106-04809		SCREW		2
72	#02				HX-0012300-0A	CABLE CLIP		1
73					TA-0750704-R0	RUBBER PLUG		1
74	#01			213-33703		SAFETY CLUTCH DISC		1
75				400-38692		UPPER SPROCKET		1
76					SS-6661110-SP	SCREW 1/4-40 L=11		2
77	#04			213-39502		UPPER FEED CAM (3.5)		1
78	#04				SS-8660810-TP	SCREW 1/4-40 L=8		2
					NOTE( )	#01....FOR LU-1561N
						#02....FOR LU-1561N-7
						#03....FOR LU-1561N
							(WITHOUT THREAD TRIMMER)
						#04....FOR LU-1561N-7
							(WITH THREAD TRIMMER)

- 4 -

3.NEEDLE BAR ROCKING COMPONENTS

	1 2
3	7	8
	7	8
5
2		1 1
		1 1
	1	9
1 4	1 0		1 8
			1 8

1 5			1 9
			1 9
		1 3
			2 7
1 7			3 1
1 7			3 0
			3 0
1 6
			2 9
		6	2 8

2 6

2 1

2 2

2 5

3 2

4 2 1

2 0

2 4 2 3

- 5 -

REF.NO		NOTE PART NO		D E S C R I P T I O N			Qty

1	230-02009			NEEDLE BAR FRAME		1
2	214-05204			HINGE STUD		1
3	228-14909			FELT		1
4			B1437-051-000	OIL WICK RETAINER		1
5			SS-8151150-TP	SCREW 15/64-28 L=10.5		1
6	228-14909			FELT		1
7	214-51406			NEEDLE BAR		1
8			B1411-057-0A0	NEEDLE BAR CLAMP ASM.		1
9			B1411-057-000	NEEDLE BAR CONNECTION		(1)
10			SS-7090910-SP	SCREW 9/64-40 L=8.5		(1)
11			B1412-051-000	FELT		(1)
12			SM-6030602-TP	SCREW M3X0.5 L=6		1
13			M1351-7B1-600	NEEDLE 135X17 #160		2
14	214-38007			UPPER FEED BAR GUIDE		1
15			SS-7110910-TP	SCREW 11/64-40 L=8.5	2
16	213-88400			ROCKING BASE GUIDE		1
17			SS-7110830-SP	SCREW 11/64-40 L=7.5		2
18	213-38603			ROCKING BASE GUIDE (B)		1
19			SS-6091022-TP	SCREW		2
20	213-38801			ROCKING FRONT ARM		1
21			SM-8080802-TP	SCREW		2
22	213-38900			ROCKING SHAFT		1
23			B1414-232-000	SQUARE BLOCK		1
24			B1410-771-000	STUD		1
25	213-39304			ROCKING SHAFT FRONT METAL		1
26	400-27746			BUSHING REAR		1
27	213-39056			ROCKING REAR ARM ASM.		1
28	213-39007			ROCKING REAR ARM		(1)
29			SS-6152440-SP	SCREW 15/64-28 L=23.5		(1)
30	213-47406			ROCKING REAR ARM FELT		(1)
31			EA-9500B01-00	CABLE BAND		(2)
32			CQ-2020000-00	OIL WICK		0.05

- 6 -

4.PRESSURE ADJUSTING & UPPER FEED MECHANISM COMPONENTS

- 7 -

REF.NO		NOTE		PART NO	D E S C R I P T I O N		Qty

1			213-40401		UPPER FEED SHAFT	1
2			213-40500		UPPER FEED FRONT ARM	1
3				SS-8660612-TP	SCREW 1/4-40 L=6	2
4			400-39326		FRONT METAL	1
5			213-78302		FEED SHAFT METAL	1
6			229-04155		MAIN SHAFT THRUST COLLAR ASM.	1
7			229-04106		MAIN SHAFT THRUST COLLAR	(1)
8				SS-8660610-TP	SCREW 1/4-40 L=6	(2)
9				SS-8150710-SP	SCREW 15/64-28 L=7	1
10				TA-0750704-R0	RUBBER PLUG	1
11			400-33027		UPPER FEED LINK ASM.	1
12			400-33026		UPPER FEED LINK	(1)
13			213-47109		FELT	(1)
14				EA-9500B00-00	CLIP CV-70S	(2)
15				CQ-3000000-F0	OIL FELT	(0.0028)
16			400-18339		SCREW	1
17				B1414-555-000	SLIDE BLOCK	1
18				WP-0501046-SC	WASHER 5X13X1	1
19			400-33029		TRIANGULAR LEVER ASM.	1
20				SS-7110510-SP	SCREW 11/64-40 L=5	1
21				B1414-555-000	SLIDE BLOCK	1
22			105-09701		FELT	1
23			400-18341		WALKING BAR DRIVING LINK	1
24			400-33033		WALKING BAR B	1
25				B1467-053-0A0	WALKING BAR ASM.	1
26				B1468-053-000	WALKING BAR SPRING	1
27				SS-6151780-SP	SCREW 15/64-28 L=17.0	1
28			214-06509		UPPER FEED GUIDE PLATE	1
29			262-25201		ROLLER	1
30				SS-6151920-SP	SCREW 15/64-28 L=19.0	1
31				SS-8110520-TP	SCREW 11/64-40 L=4.5	1
32	#01			D1456-055-B00	HINGE SCREW	1
33	#01			D1455-055-B00	CONNECTING STUD	1
34	#01			WP-0482086-SD	WASHER 4.8X11.5X2	1
35	#01			NS-6110530-SP	NUT 11/64-40	1
36	#01		214-37900		UPPER FEED REAR ARM	1
37	#01			SM-6062502-TP	SCREW M6 L=25	1
38			400-18340		SCREW	2
39			214-51505		PRESSER BAR	1
40			400-33035		PRESSER BAR HOLDER B ASM.	1
41			400-33034		PRESSER BAR HOLDER B	(1)
42				SS-7110910-TP	SCREW 11/64-40 L=8.5	(1)
43			229-07604		PRESSER SPRING REGULATOR NUT	1
44				B1502-246-000	PRESSER SPRING	1
45				SD-0800481-SP	HINGE SCREW D=8 H=4.9	1
46			214-51752		HOLDING PLATE COMPL.	1
47				B1462-053-000	THREAD RELEASE SPRING	1
48			214-06103		PRESSER LIFTER LEVER	1
49			214-06608		GUIDE PLATE SPACER	1
50				SS-7150740-SP	SCREW 15/64-28 L=7	1
51			213-40906		PRESSER ADJUSTING SCREW	1
52			229-07109		PRESSER BAR BUSHING LOWER	1
53	#02			SL-4040881-SC	SCREW M4 L=8	2
54	#02			EA-9500B01-00	CABLE BAND	1
55				NS-6150430-SP	NUT 15/64-28	1
56	#02			SM-8050602-TP	SCREW M5 L=6	2
57	#02		107-74354		UPPER AND LOWER DIAL ASM.	1
58			107-74305		VERTICAL DIAL	(1)
59			107-74404		VERTICAL CAM	(1)
60	#02		107-15100		VERTICAL DIAL SHAFT BUSHING	1
61	#02		401-08542		VERTICAL ADJUSTING CAM	1
62	#02		107-15704		VERTICAL DIAL PIN	1
63	#02			B1526-527-00G	SPRING	1
64	#02			SS-6110630-TP	SCREW 11/64-40 L=6	1
65	#02		213-41607		VERTICAL ADJUSTING ARM	1
66	#02		107-15308		PIN	1
67	#02			SM-6051402-TP	SCREW M5X0.8 L=14	1
68	#02		213-41508		VERTICAL CHANGE BASE SHAFT	1
69	#02		107-18203		FEED SHAFT FRONT METAL	1
70	#02		107-14202		VERTICAL CHANGE BELT	1
71	#02		213-39601		UPPER FEED STOPPER PLATE (A)	1
72	#02			SM-1050801-SR	SCREW M5 L=8	1
73			213-39700		UPPER FEED STOPPER PLATE (B)	1
74				SS-7111120-TP	SCREW	2
75	#02		107-13501		SPRING HOOK	2
76	#02		107-16504		VERTICAL SHAFT SPRING	1
77	#02			B3416-552-000	CONNECTING ROD HINGE SCREW	2
78	#02			RE-0500000-K0	E-RING	2
79	#02		213-39809		UPPER FEED DOG SPRING HOOK	1
80	#02			SS-7110830-SP	SCREW 11/64-40 L=7.5	1
81	#02		400-75553		ECCENTRIC ROD(SET)	1
82				CQ-2520000-00	OIL WICK	0.02
83	#02		107-13808		CONNECTION LINK PIN B	1
84	#02		401-07949		CONNECTION LINK B	2
85	#02		107-14608		CONNECTION LINK B SUPPORT PIN	2
86	#02			SM-8050602-TP	SCREW M5 L=6	2
87	#02		213-40005		UPPER FEED LINK (B)	1
88	#02		210-48707		HINGE SCREW	1
89	#02			RE-0800000-K0	E-SHAPED SNAP RING (8MM)	1
90	#02		213-40302		UPPER FEED REAR ARM (B)	1
91	#02			SM-6052002-TP	SCREW M5 L=20	1
92	#02		213-37803		FEED ADJUSTING BASE SUPPORT	1
93	#02			SS-8150710-SP	SCREW 15/64-28 L=7	1
94	#02		400-24852		VERTICAL DETECTOR SWITCH ASM.	1
				NOTE( )	#01....FOR LU-1561N
					#02....FOR LU-1561N-7

- 8 -

5.FEED MECHANISM COMPONENTS

- 9 -

REF.NO		NOTE		PART NO	D E S C R I P T I O N		Qty

1			214-51851		FEED BASE ASM.	1
2			214-51802		FEED BASE	(1)
3			214-51901		FEED BASE FORX	(1)
4				SS-9151440-CP	SCREW 15/64-28 L=14	(1)
5				WP-0621016-SD	WASHER 6.2X13X1	(1)
6				SM-8050502-TP	SCREW M5 L=5	(1)
7				B1604-012-000-A	FEED BAR SHAFT	1
8				RE-0500711-KP	SNAP RING 5	1
9				CQ-2020000-00	OIL WICK	0.14
10			213-64104		FEED ROCKER	1
11				SS-7111410-SP	SCREW 11/64-40 L=14	2
12			226-09408		FEED ROCK SHAFT	1
13			213-78302		FEED SHAFT METAL	2
14				SS-8151150-TP	SCREW 15/64-28 L=10.5	1
15			226-09309		FEED ROCKER SHAFT CRANK	1
16				SS-6121610-TP	SCREW 3/16-28 L=15.5	1
17			229-04155		MAIN SHAFT THRUST COLLAR ASM.	2
18			229-04106		MAIN SHAFT THRUST COLLAR	(1)
19				SS-8660610-TP	SCREW 1/4-40 L=6	(2)
20			102-05201		NEEDLE BAR FRAME ROD	1
21				SD-0900701-TP	HINGE SCREW D=9 H=7	1
22				NS-6680320-SP	NUT 9/32-28	1
23			213-37506		FEED ADJUSTING BASE	1
24			213-37704		FEED ADJUSTING BASE COVER	2
25				SS-7110910-TP	SCREW 11/64-40 L=8.5	4
26			213-37407		SQUARE BLOCK	2
27	#01		213-37803		FEED ADJUSTING BASE SUPPORT	2
28				SS-8150822-TP	SCREW 15/64-28 L=8	2
29			213-38306		FELT SUPPORT	1
30				SS-7090610-SP	SCREW 9/64-40 L=6	2
31			213-37902		ECCENTRIC PIN	1
32				SS-7090910-TP	SCREW 9/64-40 L=8.5	2
33			213-37308		FEED ADJUSTING ROD	1
34				SD-0800402-TP	HINGE SCREW D=8 H= 4	1
35			213-37605		SPRING	1
36			400-19926		SPRING HOOK	1
37				SS-6111610-SP	SCREW 11/64-40 L=16	2
38			213-37209		FEED ADJUSTING A	1
39				B1610-512-000	FEED DRIVING SLIDE BLOCK	1
40				SM-6061802-TP	SCREW M6 L=18	1
41			213-36805		FEED DIAL A	1
42	#02		214-30400		FEED ADJUSTER SUPPORT	1
43				SS-6121860-SP	SCREW 3/16-28 L=18	1
44			229-11804		FEED REGULATOR SCREW	1
45				RO-0922702-00	RUBBER RING	1
46			229-12000		FEED REGULATOR PIN	1
47			229-12109		FEED REGULATOR PIN SPRING	1
48			213-36656		FEED LINK ASM.	1
49			213-36607		FEED LINK	(1)
50			400-09103		CONNECTING FORKED LINK PIN	(1)
51				CQ-2020000-00	OIL WICK	(0.04)
52				SM-8050612-TP	SCREW M5X6	(1)
53	#01			SS-6120930-TP	SCREW 3/16-28 L=9	2
54			213-78906		FEED LINK PIN	1
55				SD-1000801-SH	HINGE SCREW D=10 H=8	1
56			213-36300		BACKWARD FEED LEVER SHAFT	1
57	#02		213-37803		FEED ADJUSTING BASE SUPPORT	1
58				CS-1201010-SH	THRUST COLLAR ASM. D=12 W=10	1
59				CS-1201011-SH	THRUST COLLAR D=12 W=10	(1)
60				SS-8660610-TP	SCREW 1/4-40 L=6	(2)
61				RE-0900000-K0	E-RING 9	1
62			213-88004		REVERSE FEED CONTROL LEVER	1
				NOTE( )	#01....FOR LU-1561N
					#02....FOR LU-1561N-7

- 10 -

+ 34 hidden pages

			3 1
	1		3 0	3 8
			3 0

2
			4 9
6 5					2 2	4 5
					2 3	4 5
						3 5
2				6 2	2 0	3 4
					2 0
					2 1
					2 1
			3 2	5 2	6 2
			3 3	5 2	6 2
			3 3
3			4 4	5 3		6 3
3			4 4

		3 9	4 3	5 1
			4 3	5 1	2 9
				2 5	2 9
				2 6
				2 7
				2 4	2 8
				2 4

	1 2
3	7	8
	7	8
5
2		1 1
		1 1
	1	9
1 4	1 0		1 8
			1 8

1 5			1 9
			1 9
		1 3
			2 7
1 7			3 1
1 7			3 0
			3 0
1 6
			2 9
		6	2 8

			3 1
	1		3 0	3 8
			3 0

2
			4 9
6 5					2 2	4 5
					2 3	4 5
						3 5
2				6 2	2 0	3 4
					2 0
					2 1
					2 1
			3 2	5 2	6 2
			3 3	5 2	6 2
			3 3
3			4 4	5 3		6 3
3			4 4

		3 9	4 3	5 1
			4 3	5 1	2 9
				2 5	2 9
				2 6
				2 7
				2 4	2 8
				2 4

	1 2
3	7	8
	7	8
5
2		1 1
		1 1
	1	9
1 4	1 0		1 8
			1 8

1 5			1 9
			1 9
		1 3
			2 7
1 7			3 1
1 7			3 0
			3 0
1 6
			2 9
		6	2 8