Quick Start Guide
Dual-Card Dual-Standby
Your mobile phone supports dual-card dual-standby mode, which can significantly reduce power consumption and increase your phone's standby time. Note that two restrictions exist:
When you make calls using one SIM card, the other SIM card is disabled.
For example, when you make calls using SIM card 1, SIM card 2 cannot be used to answer calls or access the Internet. If someone calls SIM card 2, the caller will hear a voice message like "The subscriber you dialed is out of the service zone" or "The subscriber you dialed is not able to answer your call, please try again later." This is because your mobile phone cannot access the network with both SIM cards at the same time and has nothing to do with your service provider's network condition. It is recommended that you subscribe to services such as voicemail or missed-call reminders from your service provider to avoid the inconvenience caused by missed calls.
When you are using one SIM card's data services, you can receive calls and messages using the other SIM card, but data services will be interrupted.
For example, when SIM card 1's data services are in use, you can use SIM card 2 for calling and messaging, but SIM card 1's data services will be interrupted as a result. When the call using SIM card 2 is terminated, or the message is received or sent, you can resume using SIM card 1's data services.
1
Getting to know your phone
Thank you for choosing the HUAWEI smartphone. First, let's take a look at a few basics.
Press and hold the power button to power on your phone. After your phone is powered up, you can use the power button to turn the screen off and on.
2
Preparing your phone
To insert the SIM card, the battery and a microSD card, please perform the few steps shown in the following figures.
Your phone is shipped with the battery partially charged. It is recommended that you fully charge the battery before using it for the first time.
3
Dual-Card Management
Your mobile phone supports access to both WCDMA and GSM networks. Follow the onscreen instructions or the quick start guide to install SIM cards.
1.On the home screen, touch 
.
2.Touch SIM management to activate the SIM cards.
You can only use 3G on one SIM card at a time.
Touch 
> More… > Mobile networks > 3G service > Enable 3G, and select a SIM card to use 3G on.
4
Locking and unlocking the screen
When you are not using your phone, press the power button to turn off the screen.
After being idle for a specified period of time, your phone locks its screen automatically.
Follow the onscreen instructions and slide to unlock the screen.
5
Making a call
On the home screen, touch 
. You can dial a phone number directly.
You can also touch a phone number in places like messages, email and webpages to make a call.
To answer an incoming call, drag 
to 
.
6
Sending messages
On the home screen, touch 
.
Adding a photo or audio clip to a text message turns it into a multimedia message.
You can also save attachments from multimedia messages.
7
Loading...