HP HLMP-3350, HLMP-3568, HLMP-3351, HLMP-3365, HLMP-3366 Datasheet

T-13/4 (5 mm) Low Profile
LED Lamps

Technical Data

H

HLMP-335X Series
HLMP-336X Series
HLMP-345X Series
HLMP-346X Series
HLMP-355X Series
HLMP-356X Series

Features

• High Intensity

• Low Profile: 5.8 mm
(0.23 in.) Nominal

• T-13/4 Diameter Package

• Diffused and Non-diffused
Types

• General Purpose Leads

• IC Compatible/Low Current
Requirements

• Reliable and Rugged

Description

The HLMP-335X/-336X Series are
Gallium Arsenide Phosphide on
Gallium Phosphide High
Efficiency Red Light Emitting
Diodes.

The HLMP-345X/-346X Series are
Gallium Arsenide Phosphide on
Gallium Phosphide Yellow Light
Emitting Diodes.

The HLMP-355X/-356X Series are
Gallium Phosphide Green Light
Emitting Diodes.

The Low Profile T-13/4 package
provides space savings and is
excellent for backlighting
applications.

Package Dimensions

5.34 (0.210)

4.83 (0.190)

5964-9295E

1-101

Selection Guide

Part Minimum

Number Intensity @

HLMP- Application 10 mA (mcd) Lens

3350 Indicator – General Purpose 2.1 Tinted Diffused Wide Angle
3351 Indicator – High Brightness 5.4 HER
3365 General Purpose Point Source 8.6 Tinted Non-diffused Narrow Angle
3366 Indicator – High Brightness 13.8 HER
3450 Indicator – General Purpose 2.2 Tinted Diffused Wide Angle
3451 Indicator – High Brightness 5.7 Yellow
3465 General Purpose Point Source 5.7 Tinted Non-diffused Narrow Angle
3466 Indicator – High Brightness 9.2 Yellow
3553 Indicator – General Purpose 1.6 Tinted Diffused Wide Angle
3554 Indicator – High Brightness 6.7 Green
3567 General Purpose Point Source 4.2 Tinted Non-diffused Narrow Angle
3568 Indicator – High Brightness 10.6 Green

1-102

High Efficiency Red HLMP-335X/-336X Series

Electrical Specifications at T

Symbol Description HLMP- Min. Typ. Max. Units Conditions

I

V

2θ1/2 Including Angle Between Half 3350 50 Deg. Note 1 (Figure 11)

λ

PEAK

λ

∆λ

τ

C Capacitance 11 pF VF = 0; f = 1 MHz

Rθ

J-PIN

V

V

η

Notes:

1. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.

2. Dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color

of the device.

3. Radiant Intensity, Ie, in watts/steradian may be found from the equation Ie = Iv/ηv, where Iv is the luminous intensity in candelas and

ηv is the luminous efficacy in lumens/watt.

Axial Luminous Intensity 3350 2.1 3.5 mcd IF = 10 mA

Luminous Intensity Points 3351 50

Peak Wavelength 635 nm Measurement at

Dominant Wavelength 626 nm Note 2

d

Spectral Line Halfwidth 40 nm

1/2

Speed of Response 90 ns

s

Thermal Resistance 260 °C/W Junction to

Forward Voltage 1.9 2.4 V IF = 10 mA

F

Reverse Breakdown Voltage 5.0 V IR = 100 µA

R

Luminous Efficacy 145 lm/W Note 3

V

= 25°C

A

Device Test

3351 5.4 7.0 (Figure 8)
3365 8.6 10.0
3366 13.8 18.0

3365 45
3366 45

Peak (Figure 1)

Cathode Lead

(Figure 7)

Figure 7. Forward Current vs.
Forward Voltage.

Figure 8. Relative Luminous Intensity
vs. Forward Current.

Figure 9. Relative Efficiency
(Luminous Intensity per Unit Current)
vs. Peak Current.

1-103