HP HLMA-VH00, HLMA-VL00, HLMP-V100, HLMP-V500 Datasheet

H

T-13/4 (5 mm), Wide Viewing Angle, High Intensity LED Lamps

Technical Data

Features

Description

HLMA-VH00 HLMA-VL00 HLMP-V100 HLMP-V500

• Outstanding LED Material

These high intensity LED lamps

Efficiency

provide the user with an

• Extremely Wide Horizontal

extremely wide 60° (horizontal)

Viewing Angle

by 30° (vertical) oval shaped

• High Light Output over a

radiation pattern. Available in TS

Wide Range of Currents

AlGaAs red, AlInGaP amber,

• Untinted, Non-diffused

Lens

AlInGaP orange, and GaP green

colors, these untinted non-

• Choice of Four Colors: 644

diffused T-13/4 (5 mm) LEDs are

Applications

nm Red, 590 nm Amber, 570

nm Green, and 615 nm

an excellent choice for outdoor

• Outdoor Message Boards

applications requiring an

Orange

• Safety Lighting Equipment

extremely wide field of vision and

• Changeable Message Signs

high brightness.

• Alternative to Incandescent

Outline Drawing

Device Selection Guide

Lamps

Amber

Red-Orange

Red

Green

8.71 ± 0.38

λd = 590 nm

λd = 615 nm

λd = 644 nm

λd = 570 nm

13.97 ± 0.76

(0.343 ± 0.015)

HLMA-VL00

HLMA-VH00

HLMP-V100

HLMP-V500

(0.550 ± 0.030)

1.02

MAX

(0.040)

NOTE 1

20.32

MIN

(0.800)

0.51 SQUARE

(0.020) NOMINAL

NOTES:

2.54

0.76

1. LEAD ORIENTATION:

.

± 0.25

2.54 ± 0.25

.

0.030)

(0.100

± 0.010)

DEVICE TYPE

CENTER LEAD

OUTER LEADS

2.54 ± .025

(0.100 ± 0.010)

HLMP-V100

COMMON ANODE

CATHODE

HLMP-V500

COMMON CATHODE

ANODE

(0.100 ± 0.010)

HLMA-VL00

COMMON CATHODE

ANODE

HLMA-VH00

COMMON CATHODE

ANODE

5.08 ± 0.25

(0.200 ± 0.010)

2. ALL DIMENSIONS ARE IN MM (INCHES).

5.59 ± 0.25

(0.220 ± 0.010)

1-56	5964-9292E

Absolute Maximum Ratings at TA = 25°C

Parameter	HLMA-VL00	HLMA-VH00		HLMP-V100		HLMP-V500	Units
DC Forward Current[1,3]	60[4,5]	60[4,5]		60		50	mA
Peak Forward Current[2,3]	400	400		600		180	mA
Average Input Power[2]	120	120		120		110	mW
Reverse Voltage (IR = 200 μA)	5	5		5		5	V
Operating Temperature Range	-40 to +100	-40 to +100		-55 to +85		-20 to +100	°C
Storage Temperature Range	-55 to +100	-55 to +100		-55 to +100		-55 to +100	°C
Junction Temperature			110				°C
Soldering Temperature		260°C for 5 seconds
[1.59 mm (0.06 in.) below
seating plane]

Notes:

1.Derate linearly as shown in Figure 5.

2.Any pulsed operation cannot exceed the Absolute Max Peak Forward Current or the Max Allowable Average Power as specified in Figure 6.

3.Specified with both die powered simultaneously.

4.Drive Currents between 10 mA and 30 mA are recommended for best long term performance.

5.Operation at currents below 10 mA is not recommended, please contact your Hewlett-Packard sales representative.

Optical Characteristics at TA = 25°C

	Luminous				Color,	Viewing
	Intensity			Peak	Dominant	Angle	Luminous
	IV (mcd)			Wavelength	Wavelength	2θ1/2	Efficacy
	@ 40 mA[1]			λpeak (nm)	λd[2] (nm)	Degrees[3]	ηV
Part Number	Min.		Typ.	Typ.	Typ.	Typ.	(lm/w)
HLMA-VL00	212		460	592	590	60° horizontal	480
						30° vertical
HLMA-VH00	200		460	621	615		263
HLMP-V100	500		1000	654	644	60° horizontal	85
						30° vertical
HLMP-V500	112		270	568	570	60° horizontal	595
						30° vertical

Notes:

1.The luminous intensity, IV, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis.

2.The dominant wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device.

3.2 θ1/2 is the off-axis angle where the luminous intensity is 1/2 the on-axis intensity.

Electrical Characteristics at TA = 25°C

	Forward			Reverse	Capacitance		Speed of Response
	Voltage			Breakdown	C (pF)	Thermal	τs (ns)
	VF (Volts)			VR (Volts)	VF = 0,	Resistance	Time Constant
	@ IF = 40 mA			@ IR = 200 μA	f = 1 MHz	RθJ-PIN	e-t/τs
Part Number	Typ.		Max.	Min.	Typ.	(°C/W)	Typ.
HLMA-VL00	1.90		2.4	5	120	100	13
HLMA-VH00	1.90		2.4	5	120	100	13
HLMP-V100	1.85		2.4	5	50	115	26
HLMP-V500	2.20		3.0	5	20	100	171

1-57