gsk GSK928TE, GSK928TC User Manual

GSK928TE/GSK928TC

Turning Machine CNC System

User Manual

GSK928TE/GSK928TC CNC System User Manual

Preface

Thank you for purchasing GSK928TE/GSK928TC CNC system. For optimum performance

and safety, please read this manual carefully.

Caution: Improper operation leads to accidents. Before operating the system, please

read the manual completely.

Before Use:

z Connect the emergency stop button of the system firmly and correctly, otherwise an

emergency stop alarm will occur when switch on the system, so that the system cannot
work properly.

z Set the reference point of the program of the system according to the actual mounting

position of the tool of the machine that the system controls.

The manual is applied to software V3.20 of GSK928TE/GSK928TC CNC system. Read
Appendix 3, Appendix 4, and Appendix 5 when using V2.13, V2.23, V3.01 software of
GSK928TC CNC system. For convenience, the manual does not distinguish 928TE from
928TC.

Chinese version of all technical documents in Chinese and English languages is

regarded as final.

i

GSK928TE/GSK928TC CNC System User Manual

Suggestions for Safety

For the safety of the system, the operator who operates the system, and the machine, these
suggestions must be read before installing and operating the system.

Safety instructions indicated in the manual must be followed when operating the system. Do
not operate it until the manual is read completely.

Follow safety instructions for the machine that the system will control. Do not run the
machine until you have completely read both the instructions and this manual.

ii