installation and user manual
e:line canopy rangehoods ERCM9010AS ERCE9020AS ERCG9030AS
EMAN_ElineRHood_Jun11.indd 1 |
24/06/11 2:44 PM |
electrolux e:line rangehoods contents 1
Congratulations
Congratulations and thank you for choosing our E:Line canopy rangehood. We are sure you will find your new rangehood a pleasure to use. Before you use your rangehood, we recommend that you read through the whole user manual, which provides the description of the rangehood and its function.
To avoid the risks that are always present when you use an electrical appliance it is important that the canopy rangehood is installed correctly and that you read the safety instructions carefully to avoid misuse and hazards. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. After unpacking the canopy rangehood please check it is not damaged. If in doubt, do not use the appliance but contact your local Electrolux Service Centre.
CONDITIONS OF USE
This appliance is intended to be used in household and similar applications such as:
• Staff kitchen areas in shops, offices and other working environments
• Farm houses
• By clients in hotels, motels and other residential type environments
• Bed and breakfast type environments.
Contents
• Product description |
2 |
• Important safety instructions |
3 |
• Dimensions |
4 |
• Installation |
5 |
• Using the rangehood |
6 |
• Maintenance and cleaning |
8 |
• Changing the halogen lamps |
8 |
• Optional ducting accessories |
9 |
• Warranty |
10 |
environmental tip
Information on disposal for users
• Most of the packing materials are recyclable. Please dispose of those materials through your local recycling depot or by placing them in appropriate collection containers.
• If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.
electrolux e:line rangehoods product description 2
Product description
1
2
3
4
5
6
|
|
7 |
ERCG9030AS |
ERCE9020AS |
ERCM9010AS |
Component list
1.Exhaust cover ceiling mounting bracket
2.Telescopic exhaust cover set
3.Flexible exhaust pipe
4.Exhaust duct transition
5.Main body mounting brackets
6.Main body and fan housing assembly
7.Grease filters
Additional items required for installation
•Fixings required to attach main body mounting brackets and anti tilt fixings.
•Fixings required to attach exhaust cover mounting brackets to the ceiling.
Technical specification
Model ERCG9030AS
Power supply: 220-240 volts 50Hz. Connects to 7.5A GPO.
Lights: 2 x 20 watt 12 volt halogen.
Model ERCE9020AS
Power supply: 220-240 volts 50Hz. Connects to 7.5A GPO.
Lights: 2 x 20 watt 12 volt halogen.
Model ERCM9010AS
Power supply: 220-240 volts 50Hz. Connects to 7.5A GPO.
Lights: 2 x 20 watt 12 volt halogen.
EMAN_ElineRHood_Jun11.indd 2-3 |
|
24/06/11 2:44 PM |
|
||
|
|
|
electrolux e:line rangehoods important safety instructions 3
Important safety instructions
This manual explains the proper use of your new E:Line canopy rangehood. Please read this manual carefully before using the product. This manual should be kept in a safe place for handy reference.
This canopy rangehood is a domestic appliance which has been manufactured and tested to comply with Australian and New Zealand Standard AS/NZS 60335.2.31.
caution
This symbol indicates the possibility of injury or damage to property
Meanings of symbols used in this manual are shown below:
This symbol indicates never to do this 
This symbol indicates always do this
caution
Read the following carefully to avoid an electric shock or fire.
Young children should be supervised to ensure they do not play with the canopy rangehood.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
Ensure the canopy rangehood is switched off before carrying out maintenance, to avoid any possibility of electric shock.
Never carry out flambé cooking under the canopy rangehood. This canopy rangehood is not recommended for barbecues. This canopy rangehood cannot be installed for external use.
Grease filters must be removed at least every four weeks for cleaning to reduce the risk of fire.
The exhaust from the canopy rangehood must not be discharged into any heating flue, which may carry combustion products from other sources. (Fig. 1)
Exhaust air must not be discharged into a wall cavity, unless the cavity is designed for the purpose.
There must be adequate ventilation of the room when the canopy rangehood is used at the same time as appliances burning gas or other fuels.
Always cover lit gas burners with pots or pans when canopy rangehood is in use.
Always switch off gas burners before you remove pots or pans.
Do not leave lit gas burners exposed due to the risk of fire. (Fig. 2)
Fig. 1
Fig. 2
electrolux e:line rangehoods dimensions / electrical connection 4
Dimensions |
Electrical connection |
Canopy dimensions
NOTE: *The fan housing exhaust outlet is 163mm in diameter. Use duct transition or flexible pipe supplied with the canopy rangehood as a reducer if using 150mm optional ducting accessories.
(See page 9 for optional ducting accessories).
•Check that the mains voltage matches with the voltage on the data plate inside the canopy rangehood.
•Check that the installation complies with standards of local gas and electricity authorities.
•If the supply cord is damaged, it must be replaced by the manufacturer or its service agent of similarly qualified person in order to avoid a hazard.
ERCM9010AS
ERCE9020AS
328mm
O163mm*
900mm
ERCG9030AS
331mm
O163mm*
83mm
900mm
391mm
593mm 1175mm (maximum)
100mm
500mm
407mm
698mm 1275mm (maximum)
520mm
Safety warnings – For the installer
When installing the cooker hood, make sure you adhere to the minimum and maximum distances from the cooker
hood base to the hob surface (as per table on right page 5).
Exhaust duct installation:
The following rules must be strictly followed to obtain optimal air extraction.
•Keep exhaust duct short and straight
•Do not reduce the size or restrict exhaust duct.
•Keep bends in the exhaust duct to a minimum.
•When using flexible duct always install duct with helix pulled taut to minimise pressure loss.
•Failure to observe these basic instructions will drastically reduce the performance and increase the noise levels of the cooker hood.
Exhaust air must not be discharged into a wall cavity, unless the cavity is designed for that purpose.
The exhaust from the cooker hood must not be discharged into any heating flue, which may carry combustion products from other sources.
EMAN_ElineRHood_Jun11.indd 4-5 |
|
24/06/11 2:44 PM |
|
||
|
|
|
Loading...