Page 1
Product Highlights
Gigabit Ethernet Speed
High-speed ports provide Gigabit Ethernet
technology while remaining backward compatible for
connections to older computers and equipment
Revolutionary Energy Eciency
Innovative D-Link Green features help to conserve
energy without aecting performance so you can
reduce operating costs and protect the environment
Smart and Flexible Management
Powerful switch management functions can be
performed through a web management interface or
through the D-Link Network Assistant Utility
DGS-1100 Series
Gigabit Smart Switches
Features
Physical
• Various selection of port counts, with or without
PoE and ber support
• Fanless design for silent operation (non-PoE
models only)
Green Technology
• Link Status detection
• IEEE 802.3az compliant
• Time-based PoE (PoE models excluding DGS1100-08P)
Advanced Features
• IGMP Snooping
• Bandwidth Control
• IEEE 802.1Q VLAN trac segregation
• Port-based VLAN
• IEEE 802.1p QoS
• Surveillance VLAN
• Voice VLAN
Management Features
• Client-based utility or web-based GUI
• Built-in SNMP MIB
1
D-Link’s DGS-1100 Series provide an aordable solution for SOHOs and Small and Medium
Businesses as well as enterprise deployment, such as in branch oces and meeting rooms
that require simple network management. Most models comes in a compact desktop-sized
metal case and features a wide selection of Gigabit port congurations with optional Gigabit
bre uplink ports. There are 4 switches in the series supporting Power-over-Ethernet with 2
of the switches in the oering high-power-budget PoE for businesses looking to power VoIP
phones, wireless access points or network cameras. The 10-port DGS-1100-10MP supports up
to 30W on eight ports with a power budget of 130W, whereas the DGS-1100-26MP provides 24
PoE-enabled ports, a power budget of 370W, and all PoE-enabled ports supports up to 30W.
Advanced management features, diagnostic and troubleshooting tools, and energy ecient
technologies provide a exible solution to suit your networking requirements.
Easy to deploy
The DGS-1100 Series supports an intuitive D-Link Network Assistant Utility and a web-based
management interface. The D-Link Network Assistant Utility allows customers to discover all
switches in the D-Link Smart Switch family within the same L2 network segment. With this
utility, users do not need to change the IP address of their PC, which also makes the initial setup
of the Smart Switches quick and easy. Switches within the same L2 network segment that are
connected to the user’s PC are displayed on-screen for instant access. This allows for extensive
switch conguration and basic setup of discovered devices, including password changes and
rmware upgrades. The graphic web-based management interface provides a user-friendly
interface that enables network administrators to remotely control their network down to the
port level.
Surveillance Features (MP Models)
• Full PoE budget and ultra-high power ports
• Per-port 6 kV surge protection
Page 2
Auto Surveillance VLAN and Bandwidth Control
The DGS-1100 Series supports Auto Surveillance VLAN (ASV), and Auto Voice
VLAN, which are best suited for VoIP and video surveillance deployments.
Auto Surveillance VLAN consolidates data and surveillance video transmission
through a single DGS-1100 Series switch, thus sparing businesses the expense
of dedicated hardware and facilities. ASV also ensures the quality of real-time
video for monitoring and control without compromising the transmission
of conventional network data. The Auto Voice VLAN technology enhances
the VoIP service by automatically placing voice trac from an IP phone to
an assigned VLAN. With higher priority and individual VLAN, these features
guarantee the quality and security of VoIP trac. Bandwidth Control can
reserve bandwidth on a per port basis for important functions that require
larger bandwidth or have high priority.
Easy Troubleshooting
The DGS-1100 Series features Loopback Detection and Cable Diagnostics to
help network administrators nd and solve network problems quickly and
easily. Loopback Detection is used to detect loops created by a specic port
and automatically shut down the aected port. The Cable Diagnostics feature
is designed for network administrators to quickly examine the quality of the
copper cables, recognise the cable type, and detect cable errors.
Advanced Features
DGS-1100 Series is equipped with advanced security features such as Static
MAC, Storm Control, and IGMP Snooping. Static MAC allows users to create a
MAC whitelist for specic ports, helping administrators limit network access
to authorised devices only. Storm Control monitors broadcast, multicast, or
unknown unicast trac and will start blocking or discarding packets which
could ood the network when the dened threshold is exceeded. IGMP
Snooping is able to reduce the loading of L3 multicast routers and save
bandwidth in network throughput.
DGS-1100 Series Gigabit Smart Switches
If the worst should happen to your network you need the very best
support and fast. Downtime costs your business money. D-Link
Assist maximises your uptime by solving technical problems
quickly and eectively. Our highly trained technicians are on
standby around the clock, ensuring that award-winning support
is only a phone call away.
With a choice of three aordable service oerings covering all
D-Link business products, you can select the package that suits
you best:
D-Link Assist Gold - for comprehensive 24-hour support
D-Link Assist Gold is perfect for mission-critical environments
where maximum uptime is a high priority. It guarantees four hour
around-the-clock response. Cover applies 24/7 for every day of the
year including holidays.
D-Link Assist Silver - for prompt same-day assistance
D-Link Assist Silver is designed for ‘high availability’ businesses that
require rapid response within regular working hours. It provides a
four hour response service Monday to Friday from 8am to 5pm,
excluding holidays.
D-Link Assist Bronze - for guaranteed response on the
next business day
D-Link Assist Bronze is a highly cost-eective support solution for
less critical environments. Response is guaranteed within eight
business hours Monday to Friday from 8am to 5pm, excluding
holidays.
PoE Support
The DGS-1100-08P/24P/10MP/26MP provide support for Power over Ethernet
(PoE), reducing deployment time for IP cameras, VoIP phones, and access
points. Dedicated power adapters are no longer required, as the DGS-1100-
24P/10MP/26MP comply with IEEE 802.3af and 802.3at PoE standards and
provide up to 30 watts per port. The DGS-1100-08P complies with the 802.3af
standard and provides up to 15.4 watts per por.
D-Link Assist can be purchased together with any D-Link business
product. So whether you’re buying switching, wireless, storage,
security or IP Surveillance equipment from D-Link, your peace
of mind is guaranteed. D-Link Assist also oers installation and
conguration services to get your new hardware working quickly
and correctly.
Page 3
DGS-1100 Series Gigabit Smart Switches
Technical Specications
General DGS-1100-08 DGS-1100-16 DGS-1100-18 DGS-1100-24 DGS-1100-26
Size Desktop 11-inch Desktop/Rackmount Size, 1U Height
Number of Ports
Port Functions
• 8 10/100/1000 Mbps • 16 10/100/1000 Mbps • 16 10/100/1000 Mbps
• 2 SFP 1000 Mbps
• IEEE 802.3 compliant
• IEEE 802.3u compliant
• IEEE 802.3ab compliance
• IEEE 802.3az compliant
• Auto-negotiation
• Auto MDI/MDIX
• IEEE 802.3x Flow Control supports Full-Duplex mode
• Supports half/full-duplex operation (full/half
at 10/100 Mbps, full at 1000 Mbps)
• 24 10/100/1000 Mbps • 24 10/100/1000 Mbps
• 2 SFP 1000 Mbps
Performance
Switching Capacity 16 Gbps 32 Gbps 36 Gbps 48 Gbps 52 Gbps
Maximum Forwarding Rate 11.9 Mpps 23.81 Mpps 26.79 Mpps 35.71 Mpps 38.69 Mpps
MAC Address Table Size 8K Entries 8K Entries 16K Entries 8K Entries 16K Entries
Packet Buffer 2 Mbits 512 Kbits 1.5 Mbits 512 Kbits 1.5 Mbits
Flash Memory 2 Mbyte 8 Mbyte
LEDs
Power (per device)
Link/Activity/Speed (per port)
Power Consumption
Maximum 4.89 watts 9.31 watts 14.88 watts 13.94 watts 19.04 watts
Physical
Power Input 100 to 240 V AC
50 to 60 Hz External
Power Adapter
MTBF 503,585 hours 2,827,541 hours 2,671,256 hours 2,406,109 hours 2,277,645 hours
Acoustics 0 dB(A)
Heat Dissipation 16.68 BTU/hr 31.77 BTU/hr 50.77 BTU/hr 47.57 BTU/hr 64.97 BTU/hr
Weight 0.42 kg (0.925 lbs) 1.53 kg (3.37 lbs) 1.56 kg (3.44 lbs) 1.63 kg (3.59 lbs) 1.66 kg (3.66 lbs)
Dimensions 171 x 98 x 28 mm
(6.7 x 3.85 x 1.1
inches)
Ventilation Fanless
Operating Temperature 0 to 40 °C (32 to 104 °F) -5 to 50 °C (23 to 122 °F)
Storage Temperature -10 to 70 °C (14 to 158 °F) -40 to 70 °C (-40 to 158 °F)
Operating Humidity 10% to 95%
non-condensing
Storage Humidity 5% to 95%
non-condensing
280x 180x 44 mm
(11.02 x 7.08 x 1.73
inches)
280x 180x 44 mm
(11.02 x 7.08 x 1.73
100 to 240 V AC
50 to 60 Hz Internal Power Supply
280x 180x 44 mm
(11.02 x 7.08 x 1.73
inches)
0% to 95% non-condensing
0% to 95% non-condensing
inches)
280x 180x 44 mm
(11.02 x 7.08 x 1.73
inches)
EMI FCC Class A, CE Class A,
VCCI Class A, C-Tick
Safety cUL, CE LVD cUL, CE LVD, CB, BSMI, CCC
FCC Class A, CE Class A, VCCI Class A, C-Tick, BSMI, CCC
Page 4
Technical Specications
DGS-1100 Series Gigabit Smart Switches
General DGS-1100-08P DGS-1100-10MP
Size Desktop
• 8 10/100/1000 Mbps
Number of Ports
Port Functions
(Ports 1 to 8 are PoE
enabled)
• IEEE 802.3 compliant
• IEEE 802.3u compliant
• IEEE 802.3ab compliance
• IEEE 802.3af / 802.3at (excluding DGS-1100-08P)
• IEEE 802.3x Flow Control supports Full-Duplex mode
11-inch Desktop/Rackmount
Size, 1U Height
• 8 10/100/1000 Mbps
(Ports 1 to 8 are PoE
enabled)
• 2 SFP 1000 Mbps
DGS-1100-24P DGS-1100-26MP
11-inch Desktop/Rackmount
Size, 1U Height
• 24 10/100/1000 Mbps
(Ports 1 to 12 are PoE
enabled)
• Support manual/auto MDI/MDIX configuration
• Auto-negotiation
• Support Half/Full-Duplex operation
• IEEE 802.3az compliant
• Per-port 6 kV surge protection
19-inch Rackmount
Size, 1U Height
• 24 10/100/1000 Mbps
(Ports 1 to 24 are PoE
enabled)
• 2 Combo 1000 Mbps
2
Performance
Switching Capacity 16 Gbps 20 Gbps 48 Gbps 52 Gbps
Maximum Forwarding Rate 11.9 Mpps 14.88 Mpps 35.71 Mpps 38.69 Mpps
MAC Address Table Size 8K Entries 16K Entries 8K Entries 16K Entries
Packet Buffer 2 Mbits 1.5 Mbits 512 Kbits 1.5 Mbits
Flash Memory 2 Mbyte 16 MBytes 8 Mbyte 16 MBytes
PoE
PoE Standard 802.3af 802.3af/802.3at 802.3af/802.3at 802.3af/802.3at
PoE Capable Ports Port 1 to 8 Port 1 to 8 Port 1 to 12 Port 1 to 24
PoE Power Budget 64 W 130 W 100 W 370 W
LEDs
Power (per device)
Link/Activity/Speed (per port)
Power Consumption
Maximum 78.8 watts (PoE on) 141.4 watts (PoE on) 128.32 watts (PoE on) 387 watts (PoE on)
Physical
Power Input 100 to 240 V AC, 50 to 60 Hz
External Power Supply
MTBF 708,219 hours 291, 575 hours 563,292 hours 269, 291 hours
Acoustics 0 dB(A) 45.4 dB(A) 44.5 dB(A) 56 dB(A)
Heat Dissipation 268.87 BTU/hr 570.51 BTU/hr 437.85 BTU/hr 1470.46 BTU/hr
Weight 0.706 kg (1.553 pounds) 1.83 kg 2.15 kg (4.74 lbs) 3.81 kg
Dimensions 190 x 120 x 38 mm 280 x 180 x 44 mm 280x 230x 44 mm 440 x 290 x 44 mm
Ventilation Fanless 1 x Fan 1 Fan 2 x Fan
Operating Temperature 0 to 40 °C (32 to 104 °F) -5 to 50 °C (23 to 122 °F)
100 to 240 V AC
50 to 60 Hz Internal Power Supply
Storage Temperature -10 to 70 °C (14 to 158 °F) -40 to 70 °C (-40 to 158 °F)
Operating Humidity 10% to 95% non-condensing 0% to 95% non-condensing
Storage Humidity 5% to 95% non-condensing 0% to 95% non-condensing
EMI
Safety
FCC Class A, CE Class A,
VCCI Class A, C-Tick
cUL, CE LVD
FCC/IC, CE, VCCI, RCM, BSMI FCC Class A, CE Class A, VCCI
Class A, C-Tick, BSMI, CCC
cUL, UL, GS, CB cUL, CE LVD, CB, BSMI, CCC cUL, UL, GS, CB
FCC/IC, CE, VCCI, RCM, BSMI
Page 5
DGS-1100 Series Gigabit Smart Switches
Software Features (DGS-1100-10MP/16/18/24/24P/26P/26MP)
VLAN • Port-based VLAN
• 802.1Q tagged VLAN
• Auto Surveillance VLAN
• Voice VLAN
• Management VLAN
L2 Features • Flow Control
• 802.3x Flow Control
• HOL Blocking Prevention
• Jumbo Frames up to 9216 Bytes
• IGMP Snooping
• IGMP v1/v2/v3 awareness Snooping
• Supports 64 Groups
• IGMP Snooping Querier
• 802.3ad Link Aggregation:
• DGS-1100-16: Support max 8 groups per device and 8 ports per group
• DGS-1100-10MP: Support 5 groups per device and 8 ports per group
• DGS-1100-18: Support max 9 groups per device and 8 ports per group
• DGS-1100-24P: Support max 12 groups per device and 8 ports per group
• DGS-1100-26: Support max 13 groups per device and 8 ports per group
• DGS-1100-26MP: Support 13 groups per device and 8 ports per group
• Loopback Detection
Quality of Service (QoS) • 802.1p Quality of Service
• 4 queues per port
• Queue Handling
• Strict
• Weighted Round Robin (WRR)
Security • D-Link Safeguard
• Traffic Segmentation
• Broadcast/Multicast/Unknown Unicast Storm Control
• Asymmetric VLAN
• VLAN Group
• Supports 128 static VLAN groups
• Max. 4094 VIDs
• Ethernet Ring Protection Switching
• G.8032 ERPS
• Cable Diagnostics
• LLDP
• Port Mirroring
• One-to-One
• Many-to-One
• Statistics
• Tx Ok
• Tx Error
• Rx Ok
• Rx Error
• Spanning Tree Protocol
• 802.1D STP
• 802.1w RSTP
• Port-based Bandwidth Control (Rate Limiting)
• Ingress: 8 Kbps
• Egress: 64 Kbps
• DoS Attack Prevention
• SSL
2
Management • Web-based GUI (Supports IPv4/IPv6) • D-Link Network Assistant Utility
Green Technology • Power Saving by
• Link Status
• LED Shut-Off
• Port Shut-Off
• System Hibernation
MIB/RFC Standards • RFC 768 UDP
• RFC 791 IP
• RFC 792 ICMP
• RFC 793 TCP
• RFC 826 ARP
• RFC 1213 MIB II
• RFC1493 Bridage MIB
• RFC1907 SNMPv2 MIB
• RFC1215 MIB Traps Convention
• Compliant with IEEE 802.3az Energy Efficient
Ethernet
• RFC2233 Interface Group MIB
• RFC2665 Ether-like MIB
• 802.1p MIB RFC4363
• ZoneDefense MIB
• Private MIB
• RFC 951 BootP client
• RFC 1542 BootP/DHCP client
• RFC 4363 802.1p
• RFC 2236 IGMP Snooping
Page 6
Software Features (DGS-1100-08/08P)
DGS-1100 Series Gigabit Smart Switches
VLAN • Port-based VLAN
• 802.1Q tagged VLAN
• Surveillance VLAN
• VLAN Group
• Supports 32 static VLAN groups
• Max. 4094 VIDs
• Voice VLAN
• Management VLAN
L2 Features • Flow Control
• 802.3x Flow Control
• HOL Blocking Prevention
• Jumbo Frames up to 9216 Bytes
• IGMP Snooping
• IGMP v1/v2 Snooping
• Supports 32 Groups
• Static Trunk
• 2 groups, 2-4 ports per group
Quality of Service (QoS) • 802.1p Quality of Service
• 4 queues per port
• Loopback Detection
• Cable Diagnostics
• Port Mirroring
• One-to-One
• Statistics
• Tx Ok
• Tx Error
• Rx Ok
• Rx Error
• Bandwidth Control
• Port-based (Ingress/Egress, min. granularity 8 Kb/s)
• Queue Handling
• Strict
• Weighted Round Robin (WRR)
Security • Static MAC Address
• Broadcast/Multicast/Unknown Unicast Storm Control
• up to 32 entries
Management • Web-based GUI (Supports IPv4) • Client-based Utility (SmartConsole Utility)
D-Link Green • Power Saving by
• Link Status
• Compliant with IEEE 802.3az Energy Efficient Ethernet
• Compliant with RoHS 6
• Cable Length
RFC Standard List • RFC 768 UDP
• RFC 791 IP
• RFC 792 ICMP
• RFC 793 TCP
• RFC 826 ARP
Optional SFP Transceivers
DEM-310GT 1000BASE-LX, single-mode, 10 km
DEM-311GT 1000BASE-SX, multi-mode, 550 m
DEM-314GT 1000BASE-LHX, single-mode, 50 km
1
Supported by the DGS-1100-10MP/16/18/24/24P/26/26MP
2
For DGS-1100-10MP/26MP only
• RFC 951 BootP client
• RFC 1542 BootP/DHCP client
• RFC 1945 HTTP/1.0
• RFC 2647 802.1p
• RFC 2236, 4451 IGMP Snooping
For more information: www.dlink.com
D-Link European Headquarters. D-Link (Europe) Ltd., D-Link House, Abbey Road, Park Royal, London, NW10 7BX.
Specications are subject to change without notice. D-Link is a registered trademark of D-Link Corporation and its overseas subsidiaries.
All other trademarks belong to their respective owners. ©2015 D-Link Corporation. All rights reserved. E&OE.
Updated December 2015
Loading...