DATA SHEET
Numerical control |
|
CybTouch 8 PS |
|
|
|
|
|
|
CybTouch 8 PS is designed to control synchronized press-brakes with 3 axes. A 4th axis and a graphic interface can be added optionally.
As part of the CybTouch numerical controls’ family, CybTouch 8 PS was designed with the OEM’s needs in mind. Offering a broad range of machine functionalities in a very accessible way, it can thus be easily and precisely fine-tuned to accurately match the needs of the machine it controls.
Boasting a very user-friendly touch screen interface, CybTouch 8 PS is a versatile numerical control that will make any end user feel immediately at ease. Optional features such as graphical
profile drawing and manual bend sequencing will turn
CybTouch 8 PS into an even more powerful, efficient and productive numerical control.
The new beam management offers smoother and faster movements with higher precision.
High speed RFlink wireless communication facilitates backup, restore, data transfer functions with laptop computers, as well as beam movements’ traces with the included oscilloscope.
CybTouch 8 PS is integrated into a sleek and modern housing, or can optionally also be delivered as a robust panel.
Standard software specifications
User friendliness
Excellent readability thanks to the large characters, big buttons and vivid colors. So intuitive that the user can be operational in no time. Visit our YouTube Official
Channel to see for yourself. Pop-up messages for security or external malfunctions.
EasyBend page
Provides immediate easy use of the machine: a second operator can briefly interrupt production without changing the program when an urgent bend is required.
Screen content
Can be simplified to its bare necessities by removing all unused functions, buttons or information.
Wizards
TouchProfile and manual sequencing (option)
Intuitively drawing a profile on the screen for fast and precise 2D program creation, as well as manual bend sequencing.
Complete set of Wizards to help setting up the back gauge axes and the beam. Machine startup is made very simple and straightforward. Time of setup is significantly reduced and more reliable.
4th R-Axis (option)
Management of the height positioning of the back gauge.
Memory capacity
Configuration
Axes configuration, inputs/outputs and auxiliary functions can be made to precisely fit the specific needs of the machine.
© Cybelec 2015
100 Punches100 Dies
300 Programs
24 Sequences per program10 Materials
May15 1/4
V2.0
Hardware specifications
Housing or panel version |
New indexing functions |
Delivered integrated into a sleek and modern housing specially designed to be attached to a swiveling arm, or optionally also available as a robust panel version.
Wizard functions make the definition of indexes a lot simpler, quicker and more precise.
Wireless communication
Integration
Can easily be integrated into the electrical box diagrams. Ideal to upgrade machines without NC with minimal changes.
Electrical connections
Reduced electrical wiring, electrical cabinet size and equipment for lower set-up costs on each press brake.
RFlink wireless radio frequency data communication (need optional RFlink USB key) allows backup, restoring and firmware upgrades operations without any cable connection to the numerical control. During startup, the beam’s positioning curves can immediately be observed and controlled on the PC.
Energy
Energy saving thanks to the integrated Eco mode function that automatically stops the main pump after a chosen time of inactivity.
Original parameters
Internal backup in a special safe memory allows the user to restore at any time the original parameters; machine is running again in an extremely short time in the event of a memory loss or involuntary parameter modification.
Encoders
CybTouch 8 PS accepts encoders with or without complementary signals.
Axis and bending functions
The following elements are available and can be configured on CybTouch 8 PS by the OEM.
However, some functions depend on the machine construction.
Features availability depends on the number of available axes and inputs/outputs.
Back gauge axis & bending beam |
Bending features |
|
Wizards and auto-tuning of the |
Program page at start up for |
Crowning (pressure or |
axes (including for the bending |
quick accessibility. |
mechanical type). |
beam). |
User friendly tool management. |
Crowning standard calculation |
High precision and fast posi- |
Automatic calculation of the |
or automatically calculated if 3 |
tioning algorithm for frequency |
bend depth, pressure and |
resulting angles are measured. |
converter axes. |
allowance, the back gauge |
Back gauge clearance during the |
Oscilloscope for the beam |
positioning, the crowning, |
bending process (yes / no). |
trajectories via RFlink (without |
the angle and back gauge |
Sequence repetition. |
cable). |
correction. |
Part counter with auto-stop. |
Indexing in several modes (in- |
Manual bend sequencing |
Time and stroke counters for oil |
cluding for the bending beam). |
(according to the programmed |
service. |
Inch / mm. |
material, thickness, bend angle |
Pump start button. |
|
and selected tools). |
|
|
Pressure management. |
|
May15 |
2/4 |
© Cybelec 2015 |
V2.0 |
|
|
|
|
|