Bosch maxx 800 User Manual [en, es, fr]

An internal heating element heats the water to up to 170º

Exclusive Hinge and Gasket System while a digital temperature sensor continually monitors the water temperature. Bosch NexxtR washers deliver the

A reinforced hinge and a new, revolutionary gasket design

most efficient and accurate water heating method for each help seal in the heat, allowing your laundry to reach the

optimum temperature, which eliminates even the toughest selected fabric type.

stains.

Quiet Performance

Features		and		Benefits			of	Your		New Washer
SENSOTRONICR Technology							Stainless	Steel	Drum
The BoschSENSOTRONICR technology optimizes the							The Nexxt	washer	drum	has hundreds of	smooth double
wash process at every		stage of	the cycle by sensing				load				to gently tumble
size, water level and temperature							punched holes, which allow your garments
				needs for superior results.
Digital sensors	care for	all fabrics		including	wool,	mohaircompletely		snag-free.
and silk. This	machine virtually		operates at		the	touch	of a
button.							Internal Water Heater

3-Part

Detergent

Dispenser

Bosch washers use suspended brushless motors, isolated

A 3-part dispenser automatically distributes detergent,

pump systems and special sound-deadening material to

bleach and softener

at

exactly

the

right times.

keep them exceptionally quiet while in operation.

This

means they can be installed virtually anywhere in the hom

XXTRASANITARYt

Cycle

without

causing

a disturbance.

Bosch's special

unbalance

control

software

eliminates noisy unbalance conditions.

With this innovative cycle, a thermostat-controlled,

intelligent

sensor heats

up the

water

to 170º F. The

clothes

R

are thoroughly

cleaned

AQUASTOP

and sanitized while killing 99.99% of

most common

household bacteria.

AQUASTOPR is an internal containment safety system

designed to

protect

against flood-type leakage to

decrease

KIDSCAREt

Cycle

the chance

of

water

damage

when the washer

is

turned

The littlest people in the house usually account for the and operating.

toughest

stains.

This

cycle

heats

the wash

water

up

to

Hose

150º F

to remove

even the

most

stubborn

stains

with

AQUASTOPR

ease.

Archie

Paddles

The AQUASTOPR Hose stops water flow in the

event the

AQUASTOPR Hose experiences flood-type leakage.

As your wash gently tumbles,

Archie

paddles cascade

water

from high above, rinsing away

suds

and giving your

laundry

a complete, even clean. An inclined drum optimizes

performance to

ensure

not a

single

shirt goes unturned.

2

Table			of	Contents
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .							4. . . . .
IMPORTANT		SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .					4. . . . .
Grounding		Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .					5. . . . .
INSTALLATION			INSTRUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .				6. . . . .
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 . . . . .
Information concerning waste disposal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .							6. . . . .
Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .							6. . . . .
Environmental			Protection /		Conservation Issues. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		6. . . . .
Factoryqsupplied equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .							6. . . . .
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 . . . . .
Installation		area. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .					7. . . . .
Removing the transport bolts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .							8. . . . .
Water connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .							9. . . . .
Electrical	connection .			. .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	10. . . . . .
Leveling	procedure. .			. .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	10. . . . . .

Transport, such as when moving . out. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11. . . . .

OPERATING	INSTRUCTION .	. . . . . . . . .	. . .	. . .	. . . .	. . . . . . .	. . . .	. .	. . .	.	.12. . . . .
Panel . . . . . . . . . .		. . . . . . . . .	. . . .	. . .	. . . .	. . . . . . .	. . . .	. .	. . .	.	.12. . . . .
Before Using For the First		Time. . . . . . . .	. . . .	. . .	. . . .	. . . . . . .	. . . .	. .	. .	.	. 13. . . . . .
Using For	the First Time. . .	. . . . . . . . .	. . .	. . .	. . . .	. . . . . . .	. . . .	. .	. . .	.	.13. . . . .

Setting the time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13. . . . .

Selecting the	Language. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	13. . . . . .
First washing	cycle (without laundry). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	13. . . . . .
Preparing the laundry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		14. . . . . .
Sorting the laundry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		14. . . . . .

Degrees of soiling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14. . . . .

Loading the laundry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15. . . . .

Laundry Detergents and Additives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16. . . . . .

Dispensing the correct amount of detergent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16. . . . .

Filling laundry detergent and/or additives. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	16. . . . . .
Decolorizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	16. . . . . .
Programs and Functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	18. . . . .

Option buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17. . . . .

Washing with Individual Settings. .	. . . . . . . .	. . .	. . . . . . . . . .	. . . . . . . . . . . . .19. . . . .
Quick Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19. . . . .
Special features. . . . . . . . .	. . . . . . . .	. . .	. . . . . . . . . . .	. . . . . . . . .	. . .	.20. . . . .
Child lock. . . . . . . . . . .	. . . . . . . .	. . .	. . . . . . . . . . .	. . . . . . . . .	. . .	. 20. . . . . .
During Washing . . . . . . . . .	. . . . . . . .	. . .	. . . . . . . . . .	. . . . . . . . .	. . .	. 21. . . . .
Re-selecting a program. . . . .	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21. . . . . .
Add a garment / Interrupting the	program. . . . . .	. . .	. . . . . . . . . . .	. . . . . . . . .	. . .	. 21. . . . .

Canceling the active program. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21. . . . .

After Washing. . . . . . . .	. . . . . . . . . .	. . . . . . .	. . . .	. . .	. . . .	. . .	. .	.	.	. 21. . . . .
User Maintenance Instructions.	. . . . . . . . . .	. . . . . . .	. . . .	. . .	. . . .	. . .	. .	.	.	.22. . . . .
Cleaning and Care. . . . . .	. . . . . . . . . .	. . . . . . .	. . . .	. . .	. . . .	. . .	. .	.	.	. 22. . . . . .

Cleaning the applicance housing and control .panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22. . . . .

Cleaning the		drum. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	22. . . . . .
Cleaning	the	detergent dispenser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .	22. . . . . .
Cleaning	water inlet strainers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .		22. . . . . .

Descaling the washing machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23. . . . .

Troubleshooting of		Minor Faults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24. . . . .
Customer	Service.	. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27. . . . .
STATEMENT OF LIMITED PRODUCT WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . 28. . . . .
Program	Selection	Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96. . . . .

3

-180º.

- Drum capacity 22 lbs (10 kg) for regular cotton.

Congratulations!

Each washing machine which leaves

The new washing machine you just

our

factory

has

undergone

a thorough

Definitions

purchased is a modern, high quality

performance

test

and

is in

full working

domestic

appliance.

condition.

The appliance

may

contain

This modern washing machine cleans

residual water due to

the testing

your laundry using the most

procedures. If you have any questions

d

WARNING

sophisticated washing

processes

concerning installation of the washing

to obtain

superior

cleaning results.

machine, our customer service will be

WARNING -

This

indicates

that

Excellent

engineering

and

reliability

happy

to

advise

you.

Further information and a selection

of

death or serious injuries may

reduces

operating

costs

significantly.

occur

as

a

result

of

An

easy

operation

philosophy,

a variety

our products can be found

on our

Web

of

this

warning.

site:

www.boschappliances.com

nonqobservance

of customized washing programs and a

solid

touch and

feel makes this

Please read and follow these operating

d

CAUTION

appliance a userfriendly assistant in

and

installation instructions

along with

your

household.

all

other

information

enclosed

with the

It

offers

the following

standard features:washing

machine.

installation

CAUTION-

This

indicates

that

-

Low

noise level

for

washing

These

operating

and

minor

or

moderate

injuries

may

instructions

describe

various

models.

occur

as

a

result

of

and spinning.

Differences

are indicated in

the

nonqobservance

of

this

warning.

-

High

door with

magnetic

door

appropriate

places.

lock.

The illustrations may show different

-

Door

opening

16

inches

(41 cm),

details than

your

washer.

NOTICE

quality sturdy

hinge, opening angle

NOTICE - This indicates that damage to the appliance or property may occur as a result of nonqobservance of this warning.

i This symbol is used to draw the

user's attention to important matters.

d IMPORTANT SAFETY INSTRUCTIONS

dWARNING

To reduce the risk of fire, electric
shock, serious injury or death when
using your washing machine, follow
basic precautions,		including		the
following:
1. BOSCH washers		are	provided with
an Operating, Care and Installation
Instructions	Manual.		Read	and
understand	all instructions			before
using the	washing machine.

2.Do not wash articles that have been previously cleaned, washed, soaked, or spotted with gasoline, dry cleaning solvents, other flammable or explosive

substances as they give off vapors that could ignite or explode.

3.Do not add gasoline, dry cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.

4.Under certain conditions hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more.

HYDROGEN			GAS IS EXPLOSIVE.
If the hot water system has not
been used			for	this length	of	time,
turn	on all		hot	water faucets		and
let the water flow out of each
faucet for several minutes before
using the washing machine. This
will	release		any	accumulated
hydrogen		gas. As the gas			is
flammable,			do not smoke or		use
an	open	flame		while carrying		out
this	procedure.

5.Before the appliance is removed from service or discarded, remove

the door and the power cord/plug.

6.	Do	not reach into the appliance if
	the	wash drum		is moving.
7.	Do	not install or store this
	appliance where			it will be exposed
	to	the	weather.
8.	Do	not	tamper	with the controls.

9. Do	not	repair	or	replace any part
the appliance or attempt any
service		unless	specifically
recommended			in	the	user
maintenance instructions or in
published user			repair		instructions
that you understand and have the
skills	to	carry	out.

10.Always unplug the washing machine from the power supply before attempting any service. Disconnect the power cord by

grasping the plug, not the cord.

11. To reduce the risk of fire, clothes, cleaning rags, mop heads and the like which have been soiled with any flammable substance, such as vegetable oil, cooking oil,

petroleum based oils or distillates, waxes, fats, etc., must be kept away from any source of ignition, including a clothes dryer. These items may contain flammable substances which, even after washing, may smoke or catch fire.

4

12. Do

not

machine

wash

fiberglass

27.

Always read and follow the

Notes:

materials

(such

as

curtains

and

instructions

of

the

manufacturer of

IMPORTANT

SAFEq

window

coverings

that

use

the

detergent(s),

cleaning

aid(s),

A.

The

GUARDS

and

WARNINGS

inq

fiberglass

materials).

Small

fabric

softener(s)

and

static

dicated

in

this manual

do not

particles

may

remain

in

the

eliminator(s) which

you are

using.

cover

all

possible

conditions

washing

machine

and

stick

to

Heed

all warnings

and

which

may

occur. Common

fabrics

in

subsequent

wash

loads

precautions.

sense,

caution

and

care must

causing

skin

irritation.

28.

Store all laundry chemicals and

be

exercised

when

installing,

13. When

children

become

old

aids in

a cool dry place according

maintaining or

operating

the

enough to

operate

the

appliance,

it

to

the

manufacturers'

instructions.

washing

machine.

is the legal responsibility of

the

29.

To reduce the risk of poisoning or

B.

Always

contact your

dealer,

parents or legal guardians to

chemical burns, keep all cleaning

distributor,

service

agent

or

ensure that they are instructed in

products out

of

the

reach

of

the

manufacturer

about

any

safe

practices

by

qualified

children.

problems

or

conditions

that

persons.

you

do

not

understand.

30.

Do

not

operate

the

washing

14. Do

not

allow

children

to

play

on

or

machine

if

any

guards, panels

GROUNDING

with

the

appliance.

Close

and/or

fasteners

except

transport

INSTRUCTIONS

supervision

of

children

is

necessary

when the

appliance

is

fixing

bolts have

been removed.

This

appliance

must

be grounded.

In

31.

Do

not

operate

the

washing

used

near

children.

the

event of

a

malfunction

or

machine

if

parts

are

missing

15. Keep

pets

away

from

the

washing

breakdown, grounding will reduce the

or broken.

machine.

risk

of

electric

shock

by

providing

a

32.

Do

not

bypass

any

safety

devices.path

of

least

resistance for

the

electric

16. Do

not

insert/pull

out

the power

33.

To avoid floor damage and mold

current. This appliance is equipped

plug

with

wet

hands.

with a cord that has an

17. Do

not

touch

the

door

if

washing

growth,

do not

let spills

or

equipmentqgrounding

conductor

and

a

splashes cause

standing

water

grounding plug.

The

plug

must

be

at high

temperatures.

around

or

under

the

appliance.

plugged

into

an appropriate

outlet

that

18. Use

caution

when

draining

hot

is properly installed and grounded in

34.

Do

not

operate

this

washing

water.

accordance

with all

local

codes

and

machine

until

you

are sure

that:

ordinances.

19. Do

not

climb

onto

the

washing

a.

the

washing

machine

has

machine

and/or lean

on

the

open

d WARNING

been installed

according

to

door.

the

INSTALLATION

20. Do

not

sit or

stand

on

the

top

of

Improper connection

of

the

INSTRUCTIONS.

the

washing

machine.

equipment

grounding

conductor

b.

all

water,

drain,

power

and

21. To

reduce

the

risk

of

fire

or

can result

in

electric

shock.

grounding

connections

are in

Connect to an individual branch

electrical

shock, DO

NOT use

an

compliance with

all local

circuit.

extension

cord

or

an

adapter

to

Check

with

a

qualified

electrician

or

regulations

and/or

other

connect

the

washing

machine

to

serviceman

if

you

are in doubt

as to

applicable

regulations

and

the

power

supply.

whether the

washer

is

properly

requirements.

grounded.

22. The

washing

machine

must

only

35.

Failure to install, maintain and/or

DO NOT modify the plug provided

be

used

for

its

intended

purpose.

with the appliance

r

if it will

not

fit

23. Always follow

the

fabric

care

operate

the washing

machine

the outlet have a proper outlet

according

to

the

manufacturer`s

installed by

a

qualified

electrician.

instructions

recommended

by

the

instructions may result in injury

KEEP

THESE

clothing

manufacturer.

and/or

damage.

24. Do

not

use the washing machine if36.

Removing

any

panel,

including the INSTRUCTIONS

FOR

it has

a

worn

power

cord

or

loose

round service panel in the

front

FUTURE

REFERENCE.

plug.

If

this

is the

case,

contact

an

can

expose sharp

edges

and

In case

of

change

of

ownership,

authorized

service

agent.

points,

electrical

connections

and

manual should be conveyed with the

25. Make

sure

that all

water

hot

surfaces.

washer.

connections

to

the

washing

37.

To

avoid

damage

to

the

door, do

SAVE

THESE

machine

have

shutqoff

valve(s)

that

not push against the door when

are readily accessible. Close the

moving

the unit.

Precautions

INSTRUCTIONS

washing

machine

water

shutqoff

should

be taken to avoid damage

valve(s) at

the

end

of

each

wash

to

the

floor.

day.

38.

The water connections should be

26. Check

the

fill

hose

connections on

made

and

tested

before

electrical

a regular

basis to

ensure that

they

power

is

applied

to

the

machine.

are

tight

and

not

leaking.

5

INSTALLATION

INSTRUCTION

Introduction

Factory_supplied

d

CAUTION

d

WARNING

Equipment

TO AVOID RISK OF INJURY

Keep

children

away

from shipping

There is a packet of accessory parts

The washing machine is heavy.

Lift

carton

and

packaging components

supplied with your washer. Check that

with caution.

to

avoid risk

of

suffocation

from

all the accessory parts supplied for you

plastic

wrap

and

folding

cartons.

model are there. If any parts are

Be

sure

to

observe

all listed

warnings

missing contact

your

dealer

Disposing

of

your

old

appliance

and

cautions.

immediately.

NOTICE

Old

appliances

are not worthless

The

drum

contains:

rubbish! Valuable raw materials can be

Frozen hoses can tear/burst. Do

not

reclaimed from

environmentally friendly

install

the washing

machine

outdoors

recycling.

or in an area exposed to freezing

is d

WARNING

conditions.

If

the

washing

machine

located in a room which will be

exposed

to

temperatures

below

If appliance is no longer usable,

pull

freezing,

or

if

it

is

located in a cabin out the main

plug, cut

off

the

power

that is

being

shut

down

for

the

cord

and

discard.

winter, any residual water in the

Also remove the washer door to

pump

or water

inlet hose(s)must

be

drained.

prevent children

from

locking

themselves

in

the appliance

These

installation

instructions

are

Intended

Use

intended

for

use

by

qualified

installers.

In addition to these instructions, if

Your washing

machine

is

intended:

installing

the

washing machine:

-

In

the United

States

comply with

-

For

domestic

use

only.

1. Water

drain

hose

the

National

Electric Code,

-

For cleaning

machine-washable

2. User manual literature pack

ANSI/NFPA70

r

latest

fabrics in

tap

water.

edition/State

and

municipal

and/or

-

For

operation

using cold

and hot

The

literature

pack

contents include:

local

regulations.

(140 °F/60 °C)

tap

water

and

-

In

Canada

comply with

the

conventional

additives

that are

Canadian

Electric

Code

C22.1 r

suitable

for

use in residential

latest

edition/Provincial

and

washing

machines.

Municipal

and/or

local

regulations.

Take care not to damage the washingEnvironmental

machine.

Do

not

hold

on to protrudingProtection /

Conservation

parts (e.g. door)

when lifting.

Issues

In addition to the safety information

Your washing machine uses water,

listed here, the local water

and

electricity

supplier

may

have

special

energy and

detergent

efficiently,

requirements.

thereby protecting the environment and

If in doubt, have the appliance

reducing your household costs.

connected

by an

authorized

technician. To

use your washing machine in an

Information

concerning

efficient and

non

polluting manner:

-

Avoid using too much detergent.

waste

disposal

-

Use detergent

bearing HE symbol

Disposing

of the packaging

for high efficiency and front loading

The shipping package

has

protected

washers.

- Add detergent according to the

your new

appliance

on its

way to

your

degree

of soiling,

amount of

home. All

packaging

materials are

laundry

and

water

hardness, and

nonrpolluting

and

recyclable.

Please

follow the detergent

contribute to a better environment by

manufacturer's

instructions.

disposing

of

packaging

materials in

an

environmentally friendly

manner.

Please ask your

dealer

or

local

authority about the best means of disposal.

1.Elbow

2.Accessory parts bag

The accessory parts bag contains:

1. Covers to be placed over the holes for the transport bolts (after removing the transport bolts

during washer installation).

6

2.Wrench for leveling.

3.Clamp for drain hose.

On	the back of the washer:
-	hot and cold water connections

-power cord with label warning to

remove transportation bolts

- two AQUASTOP hoses (remove hoses from clips on back of washer for installation)

Useful		tools
The	following		tools are helpful:
1.	Flat	head	screwdriver.
2.	Socket wrench (1/2" / 13			mm).
3.	Closed wrench (1/2" / 13			mm).
4.	Bubble Level.

Dimensions	q	Units	are not designed to be
		stacked.
	q	Units	are not designed for under
		counter installation
	Pedestal		Mounting Kit

a	=	27.0	inches		(686	mm)
b	=	30.7	inches		(780	mm)
c	=	37.0	inches		(940	mm)
d	=	16.0	inches		(407	mm)
Door		opening		angle 180°
Approx. weight				=	220	lbs (100 kg)

Installation area

dWARNING

Never ground the washer to plastic plumbing lines, gas lines or hot

water pipes.

This appliance must be installed on

8 inch pedestal accessory number WTZ 1295for solid white color WTZ 1295Sfor solid silver color WTZ 1295Pfor duo tone silver/white

15 inch pedestal accessory number WTZ 1500for solid white color WTZ 1500Sfor solid silver color

WTZ 1500C for duo tone champagne/white

WTZ 1500P for duo tonesilvr/white

If mounting the washer on the pedestal follow the instructions supplied with the pedestal.

iInstall pedestal prior to removing transport bolts.

Closet

If installing the washer in a closet, observe the minimum distances according to the following table:

Minimum	Installation Clearances
	Closet
Sides	1/4"	(6	mm)
Top	12"	(3O5	mm)
Rear	2.5"	(64	mm)

a

solid floor

and

well

leveled due

toFront

1/4"

(6 mm)

the higher spin speeds available. If

installing

the

machine

on a wood

Ventilation:

floor

over

a

basement

or

on a

Top: 48 sq. in (310 sq. cm),

second floor,

the

floor

may need

toBottom: 24 sq. in (155 sq. cm)

be reinforced. Sound, vibration, and

risk of •walking" will be affected

depending on the structure and

Checklistit

for

Page

stability of

the floor

surface where

is

installed.

Installation

completely remove

4

shipping

bolts

8

If

the

washing

machine

is to be installedand move the washer into place

on

a

weak

wood

floor

consider the

connect

the

water

supply

lines

and

9

following:

drain

pipe

q

Soft floor

surfaces,

such

as

connect

the

electrical

power

10

carpets or

surfaces

with

foam

backing,

are not suitable.

If

slide

the

washer

into

its

final

location10

possible,

place

the

washing

machine

in

a

corner

of

the room. level

the

washer

as

low

as possible 10

q

Screw

a

water

resistant

wooden

before

first

use,

run

a cleaning cycle13

board (at least 3/4" thick) to the floor.

qSecure the feet of the washing machine with holding brackets. Order the holding brackets (set) from Bosch Customer Service (WMZ 2200).

7

Removing

the

transport

assemblies.

Slide each

loosened

bolts

transport bolt assembly out of its

retaining

slot,

then

pull

it out through

d

CAUTION

the round

hole

in

the

housing.

q

If the bushings do not come out

To avoid

possible

injury

and damage

when

removing

the

bolts, place the

bolts

back

into

the

bushings

and

to the appliance and adjacent

carefully

try

again.

It

is important

to

surfaces, all four transport bolts

must be removed before using the

do this with the bolts, otherwise the

appliance.

Retain

the

bolts for

use

bushings

will

not come

out

properly.

in any future transport (e.g. when

To store

the

bolts

for

future

use,

do

moving).

If

you have

purchased

a q

pedestal mounting kit, follow the

not remove the bolts from the

installation

instructions provided

plastic

bushings.

with it before removing the transport

bolts.

q Loosen all four bolts before

removing

any of

the

bolts all

the

way from the unit.

q Remove the bottom two bolts prior to removing the top two bolts. Remove the bolts in the order shown in the diagram below.

qLoosen the bolts using the closed end of the 1/2" wrench provided. Loosen them until they can be req moved freely.

qThe recessed bottom bolts may be easier to remove using a 1/2" (13

mm)socket wrench.

qPosition the plastic cover over the hole the transportation bolts

occupied. Push the tab in (A) and slide the cover towards the small slot (B).

Storing	the	transport	bolts
Always	keep	the transport bolts for fuq
ture transportation of the appliance
(such as when moving			out).

qStore the transport bolts with the washer and bushing attached.

qCompletely remove all 4 transport bolt assemblies (bolt, spring, washer and bushings). Pull the washer drum slightly forward towards the open washer door to reduce pressure on the transport bolt

8

Supply

Line

Connection

home plumbing problems, or damage

Water

connection

H Hot water

connection

and

caused to the machine's hose (such as

level and turned •on" for proper

be

C Cold

water

connection

installation

damage).

Machine

must

Water

supply

(max.

140°F

/

60°C)

functionality.

q

Plastic threads must only

be

q

The AQUASTOP

feature

is

not

NOTICE

tightened by

hand when

active and will not operate if the

connecting

the water

supply

hoses

program selector is in the •Off"

The washing machine must only

be

to the back of the unit. Do not

position.

operated with hot (max. 140

°F

/ 60

remove the strainers from

the

°C) and cold tap water. Do not

water

supply

hoses.

q

The washer

must

be

level

for

connect

the

appliance

to

the

mixer

correct AQUASTOP

operation.

tap of an unpressurized hotqwater

boiler.

If in doubt, have the water connection

installed by an authorized technician.

The

water

supply hoses

must

not be:

-

Bent

or

flattened.

-

Modified

or

cut (integrity

can

no longer

be

guaranteed).

NOTICE

min.0,4''

(10 mm)

Properly

secured EXTERNAL

hose

connections

are

the

sole

AQUASTOP Hose

responsibility

of

the

customer.

The

manufacturer

assumes

no

responsibility

or

liability

for

q

After

connecting,

turn

on

the waterThe AQUASTOP

hose

is

an external

improperly

installed EXTERNAL

hose

or

other

connections.

completely,

and

check

that

containment technology

that

prevents

potential flooding

if

the

hose

leaks.

connection

points are

watertight.

Observe

the

water pressure

in

the

If

the

hose leaks, a

red

mark

is

Hose

Extension

displayed and the water inlet is

supply

network:

-

The

water

pressure

should

be

The AQUASTOP

hose

may

not

fit in

blocked.

between

20

and 120

p.s.i.

the space

available

at

the

wall

faucet. q

An AQUASTOP

hose

that

has

(1.37 and 8.3

bars)

when

the

tap

A short extension hose (part no.

activated

cannot

be

reset.

Contact

645787

)

is available through

customer

is turned

on

and

at

least 2.2

U.

S.

Customer

Service

for

a

service (see page 27).

gallons (8 liters) of water should be

replacement

hose

(see

page 27).

discharged

per minute.

Other

hoses

Water

drainage

-

A

pressure

regulator

valve

must be

installed if the maximum water

Available

from

appliance

dealers:

NOTICE

pressure

is

exceeded.

-

Extended supply

hose

(approx. 96.1

in.

/2.44

m).

Do not bend or pull the water

NOTICE

d

CAUTION

drainage

hose.

To prevent water damage, the hot

Height

difference

between

the

and

cold

water

valves

should

be

The connection points are under

full

installation location of the washing

accessible

when the

washing

water

pressure.

Check

seal

with

tap

machine and the drainage point:

2

machine

is

in

place

and

should

fully open.

Maximum

8 feet / 244

cm,

minimum

always be turned off when the

feet /

60

cm

(plus

the

height of

the

washing

machine is

not

in

use.

pedestal, if the washer is installed on

AQUASTOP

pedestal).

NOTICE

Upon leak or

flood

detection,

a

Connecting

the

water

drainage

hose

If

installing

the

washing

machine

in

astop-valve system

in

the

hose,

and/or

new

building

or a building

in

which

a

floating

switch

in

the

base,

trigger

q

Do

not

remove

the

screw

from

the

plumbing

system

was recently

machine

cessation

for virtual

the clamp

assembly. Loosen

the

installed or upgraded, flush the lines

containment (worst case scenario with

screw only enough so that the

before installing

the

washing

normal machine operation, 4 liters of

machine to remove any sand, dirt orwater may escape).

clamp will slide freely onto the

residue.

AQUASTOP

is

an

internal

water

drain

hose.

1. Place

the

hose

clamp

over the

end

containment technology,

and

does not

of

the

drain

hose

before attaching

protect

against outside

forces,

such as

the

drain

hose

to

the appliance.

9

d

WARNING

Electrical

To reduce the risk of fire or electrical

connection

shock,

DO NOT

use

an

extension

cord or

an

adapter

to connect

the

GROUNDING

INSTRUCTIONS

washing machine to the power

supply.

This appliance must be grounded. In

the event of a malfunction or breakq

Use

of

a

Ground

Fault Circuit

down, grounding will reduce the risk of

electrical shock by providing a path

ofInterrupter

(GFCI)

is recommended.

least

resistance

for

the electric

current.Do

not insert/remove the power plug

This appliance

features

a

cord

with

an

with wet or damp hands.

Touch the

plug

only

when

removing

the

equipmentqgrounding

conductor

and

a

grounding plug. The plug must be

plug

from

the

socket.

plugged into an appropriate outlet

which has been properly installed and

d

CAUTION

grounded

in

accordance

with

all

local

regulations

and

ordinances.

2. Attach the drain

TO AVOID RISK OF INJURIES-Take

hose

to

the drain

d

WARNING

care when

using

the

wrench.

hose

connection

on theback

of

Leveling

Procedure

the

appliance; position

the

hose

Improper

connection

of

the

clamp approximately 3/8 inch (9

equipment

grounding

conductor

1.

The

appliance

should

now be in its

mm)

from the end

of

the

hose.

may

result

in

electric shock.

Have

final

position,

ready

for

leveling

3. Tighten

the

clamp

with

a

the

appliance

checked

by

(moving

the

appliance after

screwdriver.

a qualified

electrician

or

service

leveling can

make

it

unlevel

again.)

technician

if

you

are

in

doubt

as

to

In-Wall

Installation

whether

the

washer

has

been

Each foot of the appliance or

properly

grounded.

pedestal

must

be

placed firmly

on

Do not modify the plug

provided with

the floor to prevent the washing

the appliance - if it will

not

fit

in

the

machine

from

wobbling.

outlet,

have

a

proper

outlet

installed

by

a

qualified

electrician.

Start

with

all

four

feet

screwed

in

as far as possible, then back

d

WARNING

individual feet out as necessary to

level

the

washer.

The washing machine must only

be

2. Use a bubble level (24" or less in

connected

to

an

individual

branch

length)

to

level

the

washer

front

to

circuit

via

a

socket

which

has

been

back

and

side

to

side

(be

sure

the

properly

installed

and

grounded.

level fits between the edges of the

q

Use

the

elbow.

Attach

the elbow

The

household

electrical

voltage

must

washer,

and

is

not

elevated

at

one

to

end

on

a

ridge

on

the

surface

of

the

end

of

the

hose

and

insert

correspond to the voltage specification

the

the

washing machine

(rating

plate,

end

of

the

hose into

the

on

the

washer.)

wall drain

page

27).

approximately

four

inches.

see

3.

Adjust

the

leveling

of

the washer

Connection

specifications

as

well

as

with the four height-adjustable

q

The

hose and elbow

should

the

required

fuses

are

stipulated

on

the

as

extend into

the

open

drain pipe

appliance

rating

plate.

feet.

Level

the

washer

as

low

as

possible

to help

reduce

vibration.

far as the elbow allows when

Volts

Hertz

Amperes

Watts

seated as shown in the above

q Loosen

the

lock

nut on(1 the

picture.

110-120

60

15

1350

q

Use

a strap

or

cable

tie

to hold

(max.)

illustration)

by

turning

it

clockwise.

Use

the

wrench

hose

in

place.

provided (or

a

5/8" - 16mm

Make

sure

that:

open

end

wrench).

When you

-

the

power

plug

fits

into

the

socket.

turn the lock

nut,

the footn (2

-

the

wire

size

is

sufficient.

the illustration) it is locked

-

the

grounding

system

is

properly

against

will

turn

with

it.

This w

installed.

extend

the

height

of

the

foot.

The power cord may be replaced by an electrician only.

Replacement power cords are available from Customer Service.

10

q After making preliminary adjustments, press down on each corner of the washer to make sure the unit does not wobble. If it does wobble, lower the foot on that corner until the foot touches the floor firmly.

4. Re-check the leveling status of the appliance.

5. Fine tune the leveling of your washer by checking with a bubble level after running your first load of laundry. This is a very important step.

the washer foot with a pair of pliers to keep it from turning while tightening the lock nut. It the foot does turn, it will change the height of the corner.

It may be necessary to hold

i

q Insert and tighten all transport bolts. Make sure that the tab on the transportation bolt is inserted

in the slot on the washing machine back panel.

q Prepare the transport bolts: Loosen the screw in the sleeve

until the end of the screw is level with the end of the sleeve.

q Turning the foot out (clockwise) will raise the corner of the washer, turning the foot in (counter-clockwise) will lower the corner of the washer.

When the corner of the washerq Remove the covers. is satisfactorily raised or

lowered, lock the height-adjustable feet in place by turning the lock nut counter-clockwise until it locks tightly against the washer housing.

Transport, such as when moving out

Before transporting the washing machine:

- Turn off the water.

-Disconnect the washing machine

from the power outlet.

-Dismantle the supply and drainage hoses.

-Install the transport bolts.

Preparing and inserting the transport bolts

11

OPERATING INSTRUCTION

dWARNING

Before using your washing machine, read and follow all installation and operating instructions.

Panel

Buttons for additional options

(in addition to the program if required)

ECO e:	This	option reduces the amount of energy
used for	the	washing program.

Rinse plus: Additional rinsing cycle.

Stain removal: Additional washing time with additional temperature controls to better remove stains.

Display		field
Indicates		the settings		which have been selected or which
are	to	be	changed	(e.g.	spin	speed,	finished	at, precsoak,
time	and		child lock)	as	well	as the	program	progress.

Program selector

Switches the machine on and off and selects the program. Can be turned in both directions.

Start/Pause

button

Menu

Starts or interrupts the washing cycle

(program

must beSelects

the

settings

which are

to be

changed.

selected

before

pressing

Start/Pause).

Select

Start/Pause

Indicator

light

Changes

the

setting

currently

shown

in the display (i.e. spin

flashes red: Settings can be changed,

the wash cycle speed).

can

be

started,

the

door

is locked

for

reasons

of safety,

child

lock is

active

or

program is

in

•Pause"

mode.

lit red: Program is running. "Pause" can be activated.

off:	Program	is	finished or no program has been selected
or	the door	is	open.

12

Before Using For the First Time

The washing machine must be installed and connected properly (refer to Page 6).

d

WARNING

q Press

theSelect

button until the

q

Press theSelect

button

until the

Before using your washing machine,

read and follow all installation and

hour

display is

correct.

desired

language

is displayed.

operating instructions.

q

Confirm

the language

selection by

pressing

theMenu button.

Using For the First Time

Setting the time

iThe language selection can be

confirmed either by pressing the Menu button or by leaving the selected language for five seconds.

Display field

i To define the individual settings

	(especially •Program	finished at"),		q
	it is necessary to set the time		first.
You can set the current time. The
settings are retained even if your
washing machine is not		used for	up
6 weeks.

qTurn the program selector to any program.

Example:

Press theMenu button until the minutes display flashes.

In the first line, the operating and

program	progress text	is	displayed at
the left.	The current	time is displayed
on the right whenever •Ready" is
displayed on the left.
In the	second line, the		display	indicates
the spin speed and the			time	at	which
the program is expected			to be		finished,

as well as symbols for Spin speed, Washing mode, PreSoak, Signal and Child lock.

First washing cycle (with_ out laundry)

Your appliance was tested before

leaving the factory. To ensure a fresh

q

Press

theSelect

button until

the

wash with your

initial load of clothes,

run the washer a complete cycle,

minute

display

is correct.

without clothes,

in

advance.

The

time

is

now

set.

q

Do not load any laundry.

i

Press

theMenu

button, the

menu

q

Turn on the water tap.

function ends.

q

Open the flap of the detergent

q

Press

theMenu

button

until

You

can

select

other

settings

by

dispenser.

pressing

theMenu button and change

q

Pour 1-2

Tbsp. detergent into

•Time:"

is displayed.

The

hours

them by

pressing

theS lect button.

display

flashes.

detergent

chamberI.

Selecting

the

language

i

Do not use

special detergents for

i

If no

buttons are pushed

within 10

delicates

or

wool (this will cause

seconds the display will revert

i

The

time

must

be

set before

the

excessive

sudsing).

back to

normal

•Ready".

Changed

settings

will be

retained.

language

can

be

changed

q

Close the flap of the detergent

dispenser.

i

The

program

selector

must

not

be q

Close the

door.

set toOff.

q

Set the program selector to

q

Simultaneously

press

theMenu

down

Regular/Cotton

hot

and Select

buttons

and hold

The Start/Pause

indicator light

(5 seconds)

until the

current

flashes (red).

setting

is

displayed.

13

qPress theStart/Pause button. The program starts.

The indicator light is on (red).

iThe individual program steps are indicated in the display field.

When •Remove laundry" is displayed:

qOpen the door.

qTurn the program selectorOffto.

Preparing the laundry

NOTICE

Loose debris (coins, paper clips, nails and other hard objects) can damage items of clothing as well as parts of the washing machine (e.g. drum).

Sorting the laundry	Typical stains
	- Body oils, cooking oils/grease,
According to color and degree of		sauces, mineral oil,	wax
soiling
		(containing fat/oil).
	- Tea, coffee, red wine, fruit,
		vegetables.
	- Blood, egg, milk, starch
		(containing protein/	carbohydrate).

- Soot, soil, sand (pigments), red clay.

Removing stains

NOTICE

Items of clothing may become discolored. Never wash new multiqcolored items together with other items.

If possible, pretreat stains while they are still fresh.

First, dab soapy water onto the stain. Do not rub.

Subsequently, wash the items of clothing using the appropriate program.

Occasionally, several wash cycles may be required in order to remove persistent, dried on stains.

White items may become gray.	Always Sorting	laundry according
wash white and colored items	to care	label specifications
separately.

Degrees of soiling

qEmpty all pockets.

q Brush off lint and dirt.

qClose zippers, button up duvets and hooks.

Slight dirt

No recognizable dirt or staining.

Laundry	may have some body odor.
- Light	summer clothing.

-Trshirts, shirts and blouses that

have been worn for up to one day

-Bed linen and guest towels that have been used for one day.

q

Remove

curtain rings or tie

them

Normal

dirt

up in a

net

bag.

Visible dirt and/or some light

q

Remove

pins,

buttons,

buckles

recognizable

staining.

- Trshirts, shirts and blouses that

and other

hard objects

to

avoid

are very sweaty or have been worn

scratching

the

washer

interior.

several

times.

q

Remove

nonqwashable

trim

and

-

Dish

towels, hand towels

and

bed Fabric

Types

ornaments.

Turn synthetic

knitwear

insideqout

linen

that have been used for up to

q

one

week.

Machine

Wash,

Cottons

to avoid

pilling.

-

Sheer curtains

(without smoke

Machine

Wash,

Treat spots and stains.

q

staining) that have not been

Permanent Press

To prevent loss or damage to

laundry

washed

for up

to 6

months.

and

the machine,

the following

items

Intensive

dirt

Machine

Wash,

Delicates

should be washed in a mesh

laundry

Dirt

and/or

staining

recognizable.

bag:

-

Kitchen

hand towels

that

have

Hand Wash

q

Baby socks (small items)

been

used for

up to

one

week.

Ó

Ô

Ò

Ì

	q	Hosiery					-	Cloth napkins.
	q	Belts					-	Bibs.
							- Children's outer clothing or
	q	Underwired bras		(directly		washed
								sportswear with	grass	and	soil
		in the	washer,	the	wire may come
								stains.
		loose	during wasing		and	cause
							-	Working clothes	such	as	overalls
		damage)
								or baker's and	butcher's		coats.

Temperatures

Cold	Á
Warm	Ê
Hot	Â

Do not wash clothes in washing

machine if the care label says	•Do Not
Wash" or the DO NOT WASH	symbol
Ú is on the care label.

14

Loading the laundry

Full Load

Cotton and Linens

dWARNING

TO AVOID EXPLOSION HAZARD! Items of clothing that have been

pretreated		with solventqbased
cleaning agents, e.g. stain remover
and	dry	cleaning	solvents, represent
an explosion hazard once loaded
into	the	washing	machine.
Therefore, these items must first be
rinsed thoroughly			by hand.

½ Load

Permanent Press, Synthetic Blends

and Knitwear

D Load

Wool, Delicates, Silk

NOTICE

Loose debris in the washing machine drum can damage the laundry. Before loading the laundry,

check that there is no debris in the drum.

i

Close the door.

Do not trap any items of clothing between the door and rubber seal.

Door should be able to close easily, not by force.

qOpen the door.

q Unfold the sorted items of clothing and place them loosely into the drum. Mix up large and small items. Items of varying size will distribute better during the spin cycle.

i Do not exceed the maximum load.

Overloading will cause poor wash results and will increase wrinkling.

For best results it is recommended to load the drum depending on the fabric type.

15

Dispenser I:

Laundry

Dispenser

for

detergent,

stain

remover.

i

We

recommend HE

detergents

Detergents

and

designed

to

deliver

optimum

Additives

because

they

are

particularly

front-loading

washer.

Not

performance

from

your

Dispensing

the

correct

using HE detergent could cause

problems

such

as

oversudsing,

amount

of

detergent

extended cycle periods, or a

decrease

in

wash

performance.

Dispenser

II:

d

WARNING

Cleaning additives, e.g. fabric softener,

fabric conditioner.

Do not

fill

over edge

TO AVOID RISK OF POISONING!

of

max

line!

Keep detergents

and

additives

out

of

the

reach

of

children.

i

Do

not

use

fabric

softener with

outdoor

fabrics

(ie:

rubberized or

Measure

out

the

detergent

(powder or

waterproof

materials).

liquid) according

to:

-

The

water

hardness. This

Dispenser III:

information can be obtained from

Dispenser for liquid bleach (chlorine

your

local

water

authority.

Soft

bleach, color safe bleach).

water

requires

less

detergent.

Do

not

overfill!

-

The

amount of

laundry.

i

Concentrated

or

thick

fabric

-

The

degree

of

soiling.

Information

softener,

conditioner

and

on soiling

can be found

on

Page

powder-bleach must be diluted

14.

with a little water before being

-

The specifications of the detergent

poured

into

the

dispenser

manufacturer.

Measuring

the

(prevents

overflow due

to

correct

amount

of

detergent

obstruction).

reduces the strain on the

i

Bleach

may

cause

discoloration of

environment

and

ensures optimum

the

washer's

colored

surface.

washing

results.

Therefore,

it

is

important

to keep

Too

little detergent:

the bleach away from the colored

The

laundry

is

not

cleaned

properly and

surface of

your

washer.

If any

will eventually become gray and stiff.

bleach spills on the surface, use a

Grayish brown spots (fat globules) may

moist paper towel to thoroughly

appear on

the

laundry.

The heater may

clean

it

immediately.

calcify.

i

Close

the

flap

of

the

detergent

Too

much

detergent:

dispenser. Please ensure the

Not

environmentally

friendly,

excessive

lid

is

entirely

closed.

suds reduce wash agitation producing

poor

washing

and

rinsing results

or

Decolorizing

may

prevent

proper

spinning.

Filling

laundry

detergent

NOTICE

and/or

additives

Dyes may contain sulphur or

chlorine.

These

substances may

cause

parts

of

the washing

machine

to corrode. Do not dye items of

laundry

in the

washing

machine.

qOpen the flap of the detergent dispenser.

qAdd the detergent and/or additive.

16

Rinse Plus

When this button is pressed, an additional rinsing cycle will be added to the selected cycle.

Washing cycle time is extended accordingly.

ECO e

This option reduces the amount of energy consumed by up to . This20% option is not available for cold

Programs and Functions

For optimum washing results your washer offers several program groups and additional options.

Basic programs include Regular/Cotton and Permanent press. Program selection is based in part on the laundry fabric type.

Cycle times will vary depending on cycle selected, temperature and pressure of incoming water, water hardness, size of load and type of fabrics.

Special programs are custom designed for special wash needs or specific types of fabric.

Additional options may be selected by pressing one of the panel option buttons.

Maximum spin speeds of the programs

Revolutions per		Type	of
minute		laundry/Extra		cycle
1200		Regular/Cotton
800		Permanent	Press
600		Delicates/silk
400		Hand wash	/	Wool

No final	spin (•---")		Stain	Removal
			The Stain Removal option is
The water is drained from the machine					for useONLY for
after the	final rinse. Recommended for recommended
delicate laundry.			heavily	soiled	clothes that require
			the removal		of tough, ground-in
Use this setting to avoid creasing if			theprotein-based		stains. ItNOTis
clothing cannot be taken out of the			recommended to use the Stain
washing	machine	immediately upon	Removal option with other cycles when
completion of the		cycle.	laundering normal or lightly soiled
Option	Buttons		clothes.
			Washing time		is extended.

600		Comforter
800		Jeans
900		Quick wash
1200		XXTRASANITARY
1200		KIDSCARE
1200		Refresh
1200		Drain/Spin

In theRegular/Cotton, XXTRASANITARY, KIDSCARE, and Refresh programs the fabrics will be spun at the maximum possible spin speed.

In thePermanent press, Delicates/Silk, Hand wash/Wool,

Comforter and Jeansprograms, the

washing machine spins at a lower spinprograms. speed for gentle treatment.

If required you can reduce the spin speed of laundry, minimum is

400 revolutions per minute.

Only cold water is introduced to the drum. The washing machine then heats the water to the selected wash

temperature. By raising		the
temperature	from cold	up to the set
temperature all components of the
detergent are activated in stages for
best stain	removal and	cleaning results.

17

Basic Programs

Regular/Cotton

For Cottons and coloreds made of cotton or

linen.

Hot

sturdy,

hard

wearing

items

made of

cotton or linen such as work

clothes

soiled

colorfast fabrics

and

underwear

normally and/or heavily

Warm

sturdy,

hard

wearing

items

made

of

cotton or linen such as jeans,lightlyT-shirtsand/or

normally

soiled

non-colorfast

and

sweatshirts

fabric

Cold

sturdy,

hard

wearing

items

made

of

cotton or linen (colors that may bleed

non-colorfast fabric

or

fade)

lightly soiled

Permanent press

Easyccare (dripcdry) laundry made of synthetic and blended fabric (e.g. , cotton/polyester).

Hot	cotton, permanent press, linen,				synthetic or blended fabrics and outer			colorfast	items
	garments					normally soiled
Warm	non-colorfast cotton, permanent				press, linen, synthetic or blended fabrics		and/or	normally	soiled
	and	outer	garments.	Clothes	such as blouses, shirts, overalls	lightly
Cold	non-colorfast cotton, permanent				press, linen, synthetic or blended fabrics		and/or	normally	soiled
	and	outer	garments.	Clothes	such as blouses, shirts, overalls	lightly

Special Programs

Drain/Spin

Water is drained followed by a high speed spin

Delicates/Silk

Delicates/Silk

settings

are

intended for

use

with

delicate

easy

care

items

made

of

cotton,

satin,

synthetic

or

blend

and curtains, dresses, skirts and blouses.

Hand

Wash

settings are intended for very

delicate

easy

care

items

that

usually

require

hand

washing.

These

cycle

Hand wash / Wool

been specifically designed to provide extremely gentle treatment

of

fabrics.

Silk

or

other items

marked

with

the

•H

Wash" symbolu on the care label can be safely washed with this

cycle.

Refresh

Program for

rinsing

unsoiled

textiles,

e.g.

swimwear,

and

for

removing

detergent

residue

from

textiles.

Ends

with

a

cycle.

XXTRASANITARYt

This

program

was specifically

designed

to

eliminate

most

common

houshold bacterium.

Used

for

heavily soiled

and/

stained colorfast fabrics that need to be sanitized, such

as, towels, underwear, socks, bed sheets, table clothes, e

Regular/Cotton settings are intended to be

used

for

heavily soiled

and/or

stained

colorfast

fabrics.

Sturdy,

hard-wea

KIDSCAREt

items

made

of cotton

or

linen such

as

towels,

sheets or

white

sports

socks.

Do not wash new multicolored laundry together with other laundry.

Jeans

Specially

designed

for jeans and heavy denims,

this program reduces fading and wrinkling.

Comforter

Specially

designed

program

for

large/bulky items.

Extra water is used

to ensure

complete wetting

and

gentler

spi

reduce

stretching.

Quick wash

This

program is

intended

for

all

load

sizes but

is tuned especially for

medium to

large loads with

very

light

soili

most

fabric types

except

delicates

or

lighter.

18

Washing with Individual Settings

The	individual settings	may be adjustedBelow is a quick overview of the
to	your requirements.	adjustable settings.

The steps for changing the settings are described in detail below.

Quick overview

Select a program with the program selector

Press theMenu button (following selections appear in sequence)

Spin

speed

Program

finish

Washing

Reduced

PreLSoak

Signal

Child

lock

Set

clock

at

time*

Mode

Ironing

Dependent

on

Adjustable

Normal

OFF

OFF

OFF

OFF

Hours/

program

and

in 30 minute

Quick

ON

ON

Continuous

ON

minutes

model

steps

(see Page

18).

Max

allows

allows

the

quick

mode

a gentle

spin

an integrated

the

acoustic

allows

the washer

clock

must

be

reduction of the

program finish

for

lighter

speed with

pre-soak

signal

to be

secured

to

set before

the

maximum

spin

time

to

be set

soiled

items

subsequent

cycle for

pre-

indicates

the

prevent

certain

program

speed

achieved

and

a

shorter

fluffing

to

treatment

of

start

or

end

of

functions

from

option

finish

at

by the

program

wash

time

reduce

heavily

the

program,

being

changed

time

can be

creaasing

stained items

operating

inadvertently

used

errors,

or

malfunction

Press Select button until desired setting is obtained

Press Menu button for more settings

or pressStart/Pause button to begin washing

* Available only if clock is set (see page 13

Changing Displayed Settings

iBefore setting additional options,

choose a program with the program selector!

Select the option to be changed with the •Menu" button. Press the button to

move to the next	option	on the display.
The active symbol	starts	flashing.

The current active option setting is displayed on the right.

These settings can now be changed with the •Select" button. Press the button to jump to the next possible setting.

Select	settings by	pressing Menuthe
button	and change	them by pressing
the Select button.

i Pressing the •Menu" button again,

saves the previous settings.

If you don't press any button for 10 seconds the settings are saved automatically.

19

You can set child lock on/off

before starting a program or in •Pause" mode only.

Press theMenu button until •Child lock: on" is displayed.

The •G" symbol flashes. Press theSelect button until •Child lock: off" is displayed.

Turn the program selector to the desired program to switch on the appliance.

Press the Start/Pause button (for 5 seconds) to open the door.

The door is locked and no changes can be selected.

appliance child lock is activated.

q

q

q

Deactivating the child lock

Next time you switch on the

appliance.

activated even if you switch off the

The child lock setting remains

remove laundry.

You can open the door and

hold down (5 seconds).

Press theStart/Pause button and

with activated child lock by turning the program selector to •off"! When you switch it on again the interrupted program will continue.

Unloading laundry at the end of a cycle with •child lock: o

You can stop a running program

interrupted.

is deactivated and program will be

hold down (5 seconds), child lock

Press theStart/Pause button and

with activated child lockby turning the program selector to •off"! The interrupted program will continue when the machine is turned on again.

You can stop a running program

Display Symbols

-

Additional rinse cycles if excessive

i

foam

occurs

Symbol

Function

Settings

-

Low

water pressure

-

Selection of additional options,

Normal

e.g.

•Rinse

plus"

Wash

Washing

i

You

may notice that these

effects

Pausing the

Program to

Mode

Quick

(more or less time) change the

Laundry

Wash

displayed time when they

occur in Add/Remove

the cycle.If no options are

not q

X

Stain

On/Off

selected

and

these effects

do

occur, the time indicated

will

be

Removal

the time that the cycle will finish.

Child

lock

o

Pre_Soak

On/Off

i

You

can

secure

your

washing

machine

Off,

to prevent selected functions from

Z

Signal

Continuous,

being changed inadvertently (see quick

overview

of

individual

settings,

page

Max

19).

Child lock

On/Off

If the

child

lock

has

been selected:

-

No

changes

can

be made

while

the

program

is running.

q

Special

features

-

The

door remains

locked

at

the

Auto

Load

adjust

end

of

the

program.

Starting a program with •child

•Auto Load adjust" adjusts the water

and energy consumption for each

lock:

on"

program and determines the amount

ofq

Turn

the program selector to the

laundry.

desired

program.

i

This

process is built

into

your

machineq

Load

the laundry

and close

the

and

occurs

automatically.

door.

This

control

reduces

water

and

energy

The Start/Pause indicator light

flashes

(red).

consumption

when washing

small

loads.

Unbalanced load detection system

The automatic unbalanced load detection system spins the laundry several times to ensure even distribution.

If the wash load is unevenly distributed, it will not spin (for safety reasons) or final spin speed is reduced.

In the Hand wash/wool program the

Press theStart/Pause

button and

i

appliance

will attempt

to

start the spinq

cycle

only

twice

in

order

to

prevent

hold

down (5

seconds).

The

program

starts.

The indicator

shrinking.

light is lit (red).

Displayed

Time

The

child

lock is

activated.

Due

to

these

and

other

characteristics

i

To deactivate the child lock

of the controls

the

actual

cycle time

will

temporarily

press

the

Start/Pause

vary.

button again (for5 seconds) until

When

a

program

has

been

selected,

the Start/Pause

indicator

light

the expected cycle

time is

displayed.

flashes. Now

you

can

change

programs or options. Press the

The following will affect the displayed

Start/Pause button

to

reactivate

time:

the

child

lock.

-Load size

-Repeated spin attempts to evenly distribute load

20

During

Washing

i

Due

to the

highly

engineered

i

When

theStart/Pause

indicator

suspension of

this

appliance,

it

light is lit (red), the program can be

may experience a shudder or

interrupted, however

the door

shake

when

progressing

from

cannot be opened for safety

lower to higher spin speeds.

reasons (water level,

temperature

This behavior is normal due

to

or

drum

speed

too

high).

shifting of the drum system and

i

If the speed is too high, the

should

not

cause

concern.

Re_selecting

a

program

Start/Pause indicator light is lit

(red). Laundry can be added in

If

the

child

lock

is

active,

tempoq

•Pause" mode when

the

drum is

q

a

standstill.

q

Turn

the

program selectorOffto.

rarily

deactivate

it

(see page

20).

Child

lock

activated

q

Turn

the program selectorOffto.

Turn

the

program selector to a

q

i

Refer

to

the

Child Lock

section,

newly

selected

program.

(see page 20).

The Start/Pause

indicator

light

flashes.

Canceling

the

active

q

If

the

child

lock

is

active,

program

deactivate

again

temporarily.

If you

would

like to

terminate a

program

q

If

required, change

the

settings.

and

remove the

laundry:

(see

Page

20).

q

Press

theStart/Pause

button

q

Press

theStart/Pause

button.

Close

the

taps.

q

The program

starts.

q

If Child Lock is active, it is

Add

a

garment /

necessary

to

press

and hold

down

the Start/Pause button for five

Interrupting

the

program

seconds

You can put laundry in the drum afterq

If the load is too wet, turn the

washing begins, take laundry out of

the

program selector

toDrain/Spin.

drum

early

or

interrupt

the

program

at

i

any

time.

If a program is interrupted at a

temperature,

the

door may remain

i

It

is

not

recommended

to

add

locked

until

the

appliance

has

laundry

after

the

washing phase is

cooled

down.

complete.

i

If

the

program is terminated

by

Without

child

lock

q

Remove the

laundry.

switching off the appliance, the

door may

remain locked.

i

You

can add or reduce laundry

as

NOTICE

long as theStart/Pause indicator

Occasionally check for any foreign

light

flashes

(red).

After

Washing

between

the drum and rubber seal

q

Press

theStart/Pause

button.

objects

(e.g.

coins, paper

clips)

The following

displays are

The Start/Pause

indicator

light

goes

- To avoid risk of rust!

indicated in

succession:

•Pause",

out.

i

After

washing, leave

the

loading

•Door

can be

opened".

Display

field:

•Remove laundry".

Open

the

door.

door

ajar

to

allow the

inside of

q

the washing

machine

to

dry.

qAdd/remove the laundry.

qClose the door.

qPress theStart/Pause button. The program continues.

The indicator light is lit (red).

q Open the door.

21

User

Maintenance

Instructions

Cleaning

the

drum

Cleaning water

inlet

d

CAUTION

If

rust spots

have

formed

due to

strainers

The

access

panel

located

on

the

leftqover

debris

(e.g.

coins,

paper

clips,This

is necessary

if very little

or no

bottom right of the washer is for

nails):

water flows into the washing machine.

Use

a

chlorineqfree cleaning

agent.

Service Access and is to

be

opened q

Cleaning is recommended every 6

only by an Authorized or

Qualified

Follow

the

manufacturer's

Service Technician.

(Panel

may be

instructions.

Never use

steel

wool.

months to reduce valve blockage in

hidden from view by door

areas

using hard

water.

Cleaning

the

detergent

extension).

First

release

the

water

dispenser

pressure in the

supply

hoses:

If residual detergents or additives have q
accumulated or	if softener/bleach	are
not fully rinsed	out:	q

Turn off the water taps.

Turn the program selector to any warm program.

q Press Start/Pause button and wait for 30 seconds.

q Turn the program selectorOffto.

Cleaning the strainer(s) on the water tap

On both the hot and cold water tap:

qOpen the flap of the detergent dispenser.

access panel

Cleaning and Care

dWARNING

TO AVOID

RISK OF ELECTRIC SHOCK!

Always disconnect the appliance from the power outlet before

cleaning.

Never clean the washing machine with a pressure washer.

dWARNING

TO AVOID

RISK OF EXPLOSION!

Never use flammable solvents to clean the appliance.

qPull out the softener/bleach compartment in a vertical direction and remove.

qClean the detergent dispenser, by inserting under warm running water.

Cleaning the appliance housing and control panel

As required:

qUse hot soapy water or a mild, nonqabrasive cleaning agent.

qRub dry with a soft towel.

qInsert the detergent dispenser until it clicks into place.

qDisconnect the hose from the water tap.

qRinse the strainer under running water.

qReconnect the hose.

Cleaning the strainers on the washing machine

On both the hot and cold water tap:

22

qDisconnect the hose from the back of the washing machine.

Descaling the washing machine

qPull out the strainer and rinse under running water.

q Insert the strainer and reconnect the hose.

NOTICE

Descaling agents contain acids which may attack parts of the washing machine and discolor the laundry.

Provided that you use the correct type of detergent, it is not necessary to descale the washing machine.

If white spots, lime or mineral deposits appear on the interior of the washing machine drum you can use a descaling agent to remove them.

However, if	the appliance	has to
be descaled,	please follow	the

q Turn	on the	water	taps	instructions provided by the descaling
				and check
that	there are	no	leaks.	If water isagent manufacturer.

leaking, check that the strainer is properly attached.

qTurn off the water taps.

Cleaning Tips

It is recommended that a small amount of household bleach be run through the washer every 3 months.

With no laundry in the machine, run the machine as follows:

qPour 1 cup of bleach in Detergent

compartment of the dispenser

qRun a Regular/Cotton Hot program

23

Troubleshooting

dWARNING

TO AVOID
RISK OF ELECTRIC		SHOCK!
Repairs	should only	be carried out
by an	authorized technician.

of		Minor		Faults
If repairs are necessary, and you
cannot eliminate			the fault	yourself with
the	aid	of the	following	table:
q	Turn	the program selectorOffto.

qDisconnect the washing machine

from the power outlet. q Turn off the water taps.

qCall Customer Service (refer to Page 27).

Fault

Possible

cause

Action

The door cannot be

Child

lock

activated.

Deactivate

child

lock;

(see

Page

20)

opened.

Power

failure.

An interrupted program will be resumed when power is

restored.

If the

laundry

is

to

be

removed during a power

failure, call Customer

Service

(refer to Page

27).

Program is running and/or the door is

locked for

safetyWait

until

the

program

ends

(see Page

21).

reasons.

Plug is loose or not inserted.

Eliminate

the cause.

Program selector turned Offto before end

of program.

Select

a

program.

Door cannot be opened, even though the applianc has been switched off an on again.

Child	lock	activated.		Deactivate child lock (see Page 20).
For safety		reasons the door has been	locked	becauseSeethe "Adding to the laundry/Interrupting the program",
water	level, temperature or drum speed		is too	high. Page 21 .

Program		continues	running, Child lock activated.
even though the appliance
has	been	switched	off and
on	again.

Deactivate child lock (see Page 20).

Appliance	cannot	be	Child lock activated.
operated.	"Child	lock
activated"	as indicated		in

the display field.

Deactivate child lock (see Page 20).

Control lights do not ligh A fuse		has blown.
up.
	Power	failure.

Reset circuit breaker.

Call Customer Service if this fault recurs.

An interrupted program will be resumed when power is

restored. If the laundry is	to be removed during a power
failure, call Customer Service	(see page 27).

Program

does

not

start.

Start/Pause

button

not

pressed.

Press

theStart/Pause

button.

Start/Pause

indicator light

flashes.

Program

does

not

start.

Door

not

closed

properly.

Check whether laundry is trapped in door.

"Check

Door

!"

indicated

Close the door (a click should be heard).

the

display

field.

Program

continues.

Program

does

not

start.

End

time

selected

and

activated.

None.

Appliance starts automatically.

"Real

Time

delay"

is

indicated

in

the

display

field.

Clock

cannot

be

set.

Program has already started; when a program has

Wait

until

program

ends.

started, the

clock

cannot

be set.

"Set

clock:"

text

remains

inThe setting has switched from hours to minutes; bothNone.

the

display

field

even

selection

points

have the

same text.

though

theMenu

button

has

been

pressed.

24

Fault

Possible cause

Action

No

time

displayed.

Time

not

set.

Set time (see Page 13).

End

time

cannot

be

Time

not

set.

Set

time

(see

Page

13).

selected.

Program has already started; when a program has

Before

starting

the

program,

select and start

the

desired

started, the end time can no longer be selected.

end

time

(see

Page 19).

Spin

speed cannot

be

Spinning

is already in progress; during spin cycle

theSelect

speed before

spinning.

selected.

speed cannot

be

changed.

Child lock

cannot

be

The

program

has

already

started.

Child

lock

can

be

selected

in pause

mode.

selected.

Detergent

residue

in

the

Detergent

was

damp or

lumpy.

Clean

and

dry

the

detergent

dispenser

(see

Page

22).

detergent

dispenser.

Use the cap of the detergent bottle to measure liquid detergents.

Water does not enter the machine or detergent is washed away.

"Check water tap!" indicated in the display field.

Water	tap not turned	on.		Turn on	water tap.
				Program	continues.
Supply	hose kinked or	pinched.		Eliminate	the cause.

Strainers in supply hose clogged.

Clean the water inlet strainers (see Page 22).

AQUASTOP

Hose

safety

feature

activated.

Check for safety indicator (see page 9).

If red, replace

hose.

AQUASTOP

is

triggered

Close water tap and investigate leak.

Water

pressure

too

low.

Eliminate

the

cause.

Water

cannot be

seen in

This

is

not

a

fault.

drum.

The

water

level

is

below

the visible part of

the drum.

Washing

solution

has

not

Suds

Use less detergent for future wash loads.

Detergents

drained

completely. "Suds

specifically designed for your High Efficiency washer

or blocked

pump?"

produce

fewer suds and will include the

letters •HE" on

indicated

in

the

display

the packaging.

field.

Pump

is

blocked

Clean the water drainage pipe and/or drain hose.

Water

is

flowing

out

from

The

thread

of

the

supply

hose

is not tight.

Tighten

the

thread.

underneath

the machine.

Leak

in

the drain

hose.

Replace

the

drain hose.

Suds coming out of the detergent dispenser.

Too much soap or non-HE soap used, pump coul remove suds.

Mix 1	tablespoon of fabric softener with(½1 ptlire)	of
water and pour into detergent dispenserI. (not with
outdoor	fabric)

Use less detergent for future wash loads.

Detergents

specifically designed for your High Efficiency washer

produce

fewer

suds and

will

include

the

letters •HE" on

the

packaging.

Repeated

spinning.

This

is

not

a

fault.

Always

load

the

drum

with

andlarge small

items

The imbalance compensation system is attempting to together.

balance

the

load

through

repeated

spins.

The laundry was not spu

Large

items

of

clothing

have become

entangled and couldAlways

load

the

drum

with

andlarge small

items

(Laundry

is still

wet).

not be

distributed

evenly

in the drum. For reasons oftogether.

safety the highdspeed spin cycle was automatically

suppressed.

Load

size too

small.

Add

more

laundry.

Too

much

detergent.

Add

fabric

softener and start Refresh cycle.

Program

duration

extended

This

is

not

a

fault.

Add

a

more

appropriate

amount of

detergent.

The suds detection feature has activated an additional

rinsing

cycle to

reduce

the amount

of

suds.

This

is

not

a

fault.

Always

load

the

drum

with

andlarge small

items

The imbalance compensation system is attempting to together.

balance

the

load

through

repeated

spins.

25

Fault

Possible

cause

Action

Unsatisfactory

washing

The

degree

of soiling

was

higher

than

estimated.

Select

suitable

program

result.

or

Stain

removal

as

an

additional

option.

Not

enough

detergent.

Add detergent according to the manufacturer's

specifications.

Detergent residue

on

the

Some

phosphatecfree detergents contain

watercinsoluble Brush

off

spots

when

laundry

is

dry.

laundry.

residues

that

may

appear

as

light

spots

on the

laundry.

Gray

residue

on

the

Dirt

accumulation

from

ointments,

fats

or

oils.

Add

the

maximum

amount of

detergent

and

select

the

laundry.

highest

permissible

temperature.

System shakes or shudders Drum system

suspension can

shift

during

speed

up,

thisMix

small

and

large

laundry

pieces in

load

to minimize

when

passing

from

lower

tois not

a

failure.

this

effect.

higher

speed

spinning.

Fault

displays

Text

in display

Possible

cause

Action

field

"Check

water

tap!"

Water taps not turned on.

Turn on water tap. Program continues.

Supply hose kinked or trapped.

Eliminate

the

cause.

Strainer in supply hose clogged.

Clean the water inlet strainers (see Page 22).

Water

pressure

too

low.

Eliminate

the

cause.

AQUASTOP

Hose

safety feature

activated.

Check

for

safety indicator

(see

page

9).

If red,

replace

hose.

"Suds or

blocked

Suds

or

pump

is

blocked.

Use less

detergent for future wash

loads.

Detergents

pump?"

specifically designed for your High Efficientcy washer

produce fewer suds and will include the letters •HE" on th

packaging.

Clean

the

water drainage pipe and/or drain hose.

"Check

Door!"

Door

not

closed

properly.

Check whether laundry is trapped in door.

Close

the

door.

AQUASTOP

AQUASTOP

is

triggered

Close

water tap and investigate

the

leak.

Activated"

Washing

process is

AQUASTOP

is

triggered

Locate and resolve the leak.

Check all

connections.

Rese

stopped.

•Aquastop

AQUASTOP .

activated"

indicated

in

display

field.

If

the

fault

cannot

be eliminated with the aid of the above

table, switch

the

appliance

off,

wait

5 seconds,

switch

again,

select

and

start

the

program.

If

the

fault

continues,

call customer

service; see

Page 27.

26

your dealer or installer or an authorized- Explanation of Problem service center. Do not attempt to repair

If service becomes necessary, contact - Date Problem occurred

Customer Service

The washing machine requires no	If writing	or calling,	please provide the You	will find the model number and
special care other than the care	and following	information:	serial	number on the rating plate

cleaning noted previously. If you are having a problem with your washing machine, please refer to page 24 before calling for service.

the appliance yourself. Any work performed by unauthorized personnel may void the warranty.

-	Model	Number		located		on	the	housing	and is	visible
				with	the	door		open.
-	Serial	Number
				The	image		below shows		the
-	Date of Original		Purchase
				approximate			location of the rating plate.
				The model number has a rectangle
				around it.			The serial number			is locate
If writing, please also include a daytimebelow the model number.
telephone		number	and a copy of the	An	example		is	shown below.

sales invoice.

If you are having a problem with your washing machine and are not pleased with the service you have received:

q First, please contact your installer or the Authorized Service Contractor in your area and explain to them why you are not satisfied. This will usually correct the problem.

q If after working with your installer or service technician the problem still has not been resolved to your satisfaction, please let us know either by writing to us at:

BSH Home Appliances 5551 Mc Fadden Ave.

Huntington Beach, CA 92649

or calling us: 1-800-944-2904

The manufacturer reserves the right to make changes in the product or manual without notification.

27

STATEMENT OF LIMITED PRODUCT WARRANTY

Bosch

Nexxt ClothesWasher

What

this

Warranty

Covers

&

Who

it AppliesThe to:limited warranty provided by BSH

Home

Appliances

Corporation

(B

in this Statement of Limited Product Warranty applies

only to thexxtBoschClothesNeWasher

(•Product")

sold

to

you,

the

first

using purchaser, but strictly conditioned

on

the

Product

having been purchased: (1)

for your normal, household (non-

use, and has in fact at all times only been used for

normal household purposes (any commercial use or setting of

automatically voids the warra);nty(2) new

at

retail

(not a

display, •as is", or previously

returned model)

purchased

direct

end-user consumer, and not for resale, or commercial

use; and (3) within the United States or Canada, and has a

remained within the country of

original

purchase.

The

warranties stated

herein apply

only to the

first

purchaser

of

th

are

not transferable.

The

warrantyautomaticallyis

voidif

the

Product was a display model, sold

•as

is",

tampered

with,

a

damaged

or

•scratch

and

dent"

model,

or

a

previously

returned model, a free give-away,

charitable

donation

or

con

S

Please

make

sure

to

return

your

registration

card;

while not necessary to effectuate warranty coverage, it is

the

Bosch to notify you in the unlikely

event of

a

safety

notice or product recall.

How

Long

the

Warranty

Lasts:Bosch

warrants

that

the

Product is free from defects

in materials and workmanship fo

of three hundred sixty-five days (365) days from the

date of purchase.

The foregoing timeline

begins

to run upon

purchase, and shall not be stalled, tolled, extended, or suspended, for any reason whatsoever.

Repair/Replace as Your Exclusive Remedy:During this

warranty period, Bosch or one

of its authorized service provide

repair your Product without charge to you (subject to

certain limitations stated herein) if your Product proves to have

manufactured with a defect in materials or workmanship.

If reasonable

attempts to

repair the Product have been m

success, then Bosch will replace your Product (upgraded models may be available to you,

in Bosch's

sole discretion

additional charge). All removed parts and components shall become the property of

Bosch at its sole option.

All

r

repaired parts shall assume the identity

of

the

original

part for purposes of this warranty and this warranty shall not

with

respect

to

such

parts.

Bosch's

sole

liability

and

responsibility hereunder is to repair manufacturer-defective Produ

using a Bosch-authorized service provider during normal business hours. For safety and property damage concerns, highly recommends that you do not attempt to repair the Product yourself, or use an un-authorized servicer; Bosch responsibility or liability for repairs or work performed by a non-authorized servicer. If you choose to have someone authorized service provider work on your Product, THIS WARRANTY WILL AUTOMATICALLY BECOME NULL. AND VOI

Authorized service providers are those persons or

companies

that

have been specially

trained

on

Bosch

products,

an

possess, in Bosch's opinion, a superior reputation

for

customer

service and technical ability (note that they are indep

entities

and

arenot agents, partners, affiliates or

representatives

of

Bosch).

Notwithstanding

the

foregoing,

Bosch

will

not

any liability, or have responsibility, for the Product

if it is located in a remote area (more than 100 miles from an

provider) or is reasonably inaccessible, hazardous,

threatening, or treacherous locale, surroundings, or environment; in

event, if you

request,

Bosch

would still pay for labor

and

parts

and

ship the parts to the

nearest

authorized

servic

you would still be fully liable

and

responsible

for

any

travel

time

or

other special charges by

the

service

company,

agree to make the service call.

Extended

Limited

Warranty:

LENGTH

OF

WARRANTY

SCOPE

OF

WARRANTY

2 Year

Limited

Warranty

Bosch

will

provide

replacement parts,

free

of

charge,

for any

component

From

Date

of

Purchase

part

that

proves defective

under

conditions

of

normal

home

use

during

the first two years from the date of purchase, normal

(non-expedited)

shipping costs included, labor charges excluded.

2 Year Limited Warranty on Electronics

Bosch

will

repair

or replace, free of charge,

any

microprocessor

or

printed

From

Date

of

Purchase

circuit

board

that

proves

defective

under

conditions of

normal

home

use

during

the first two years from the date of purchase, labor charges

excluded.

2 Year Limited Warranty on Motor

Bosch

will

repair

or replace, free of charge,

any motor or component part

From

Date

of

Purchase

of

the

motor

that

proves

defective

under

conditions

of

normal

home

use

during

the first two years from the date of purchase, labor charges

excluded.

Out

of

Warranty

Product:

Bosch

is under

no

obligation,

at law or otherwise, to provide you with any concession

repairs, pro-rates, or Product replacement, once this warranty has expired.

Warranty

Exclusions:

The

warranty

coverage

described

herein

excludes

all

defects

or

damage

that

are

not

the

dire

Bosch, including without limitation, one or more of the following:

(1)

use

of

the

Product

in

anything

other

than

its

customary and intended manner (including without

limitation,

any

form

of

commercial

use,

use

or

storage

of

an

indo

outdoors, use of the Product in conjunction with

air or water-going vessels); (2) any party's willful misconduct, neglig

misuse,

abuse, accidents, neglect,

improper operation,

failure

to

maintain,

improper

or negligent

installation,

tampering,

28

follow operating instructions, mishandling, unauthorized service (including self-performed •fixing" or exploration of the

appliance's	internal workings);	(3) adjustment, alteration or modification	of any kind; (4) a failure to comply with any
state, local,	city, or county	electrical, plumbing and/or building codes,	regulations, or laws, including failure to install

strict conformity with local fire and building codes and regulations; (5) ordinary wear and tear, spills of food, liquid, accumulations, or other substances that accumulate on, in, or around the Product; and (6) any external, elemental a

environmental

forces and factors, including without limitation, rain, wind, sand,

floods, fires, mud slides, freezing temp

excessive

moisture or

extended

exposure to

humidity, lightning,

power

surges,

structural failures

surrounding the applia

acts

of

God.

In no event shall Bosch have any liability or responsibility whatsoever for

damage to surrounding

pro

cabinetry, floors, ceilings, and other structures

or objects around the

Product.

Also excluded from this warranty are

nicks,

minor

dents, and cosmetic damages on external surfaces and exposed

parts; Products on which the serial nu

been

altered,

defaced, or removed; service visits to teach you how to use the Product,

or visits where there is

not

the

Product;

correction of installation problems (you are solely responsible for

any structure and setting for the Produ

all

electrical,

plumbing

or other

connecting facilities, for proper

foundation/flooring, and for

any

alterations including

wit

limitation cabinetry, walls, floors, shelving, etc.); and resetting of breakers or fuses. TO THE EXTENT ALLOWED BY WARRANTY SETS OUT YOUR EXCLUSIVE REMEDIES WITH RESPECT TO PRODUCT, WHETHER THE CLAIM ARISES

CONTRACT OR TORT	(INCLUDING STRICT LIABILITY, OR NEGLIGENCE) OR OTHERWISE.	THIS WARRANTY IS	IN
ALL OTHER WARRANTIES, WHETHER EXPRESS OR IMPLIED. ANY WARRANTY IMPLIED BY LAW, WHETHER FOR
MERCHANTABILITY OR	FITNESS FOR A PARTICULAR PURPOSE, OR OTHERWISE, SHALL	BE EFFECTIVE ONLY	FO

PERIOD THAT THIS EXPRESS LIMITED WARRANTY IS EFFECTIVE. IN NO EVENT WILL THE MANUFACTURER BE L CONSEQUENTIAL, SPECIAL, INCIDENTAL, INDIRECT, •BUSINESS LOSS", AND/OR PUNITIVE DAMAGES, LOSSES, OR EXPENSES, INCLUDING WITHOUT LIMITATION TIME AWAY FROM WORK, HOTELS AND/OR RESTAURANT MEALS,

REMODELLING EXPENSES IN EXCESS OF DIRECT DAMAGES WHICH			ARE DEFINITIVELY CAUSED			EXCLUSIVELY BY
OR OTHERWISE. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQ
DAMAGES, AND SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG IMPLIED WARRANTY LASTS, SO T
LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
HAVE OTHER RIGHTS, WHICH VARY FROM STATE	TO STATE.	No	attempt	to	alter, modify or	amend this	warran
effective unless authorized in writing by an officer of	BSH.
How to Obtain Warranty Service:To obtain warranty	service for	your	Product,	you	should contact	the nearest	Bosch
authorized service center.
BSH Home AppliancesCorporation - 5551 McFadden	Avenue, Huntington Beach, CA 92649 / 800-944-2904

29