Corded Hand Vac / Blower
INSTRUCTION MANUAL
Catalog Number HV9010 |
|
Catalog Number HV9010P |
|
|
|
Thank you for choosing Black & Decker! Go to www.BlackandDecker.com/NewOwner to register your new product.
PLEASE READ BEFORE RETURNING THIS
PRODUCT FOR ANY REASON:
If you have a question or experience a problem with your Black & Decker purchase, go to
HTTP://WWW.BLACKANDDECKER.COM/INSTANTANSWERS for instant answers 24 hours a day.
If you can’t find the answer or do not have access to the internet,
call 1-800-544-6986 from 8 a.m. to 5 p.m. EST Mon. -- Fri. to speak with an agent. Please have the catalog number available when you call.
To purchase a replacement filter call 1-888-678-7278.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
VEA EL ESPAÑOL EN LA CONTRAPORTADA.
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
Cat. No. HV9010 / HV9010P |
Form No. 90554210 |
AUG. 2009 |
Copyright © 2009 Black & Decker |
|
Printed in China |
IMPORTANT SAFEGUARDS
W hen using electrical appliances, basic safety precautions should always be followed, including the following:
PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS CAREFULLY BEFORE USING THE UNIT.
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains relates to protecting YOUR
SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in property damage.
WARNING: Injury to pets. Do not use directly on animals. 
WARNING: To reduce the risk of fire, electrical shock or injury:
•Do not leave appliance when plugged in. Unplug from outlet when not in use and before servicing.
•Use indoors only. Do not use on wet surfaces.
•Do not store outdoors or on wet surfaces. To prevent tripping accidents, store vacuum after each use.
•Close supervision is necessary when any appliance is used near children. Do not allow to be used as a toy.
•Use only as described in this manual. Use only manufacturer’s recommended attachments.
•Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, is left outdoors, dropped into water or is damaged in any manner. Return the appliance to any authorized service facility.
•Do not pull or carry by cord, do not use cord as a handle, do not close a door on cord or pull cord around sharp edges or corners, do not run appliance over cord. Keep cord away from heated surfaces.
•Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
•Do not handle plug or appliance with wet hands.
•Do not put any object into unit openings. Do not use with any openings blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
•Keep hair, loose clothing, fingers, and all parts of body away from openings and moving parts.
•Keep end of hose, wands and other openings away from your face and body.
•Use extra caution when cleaning on stairs.
•Keep work areas well lit.
•Do not vacuum any electrical appliances while they are plugged in.
•Do not use this product to pick up sharp objects, metallic debris or large, solid objects (i.e., rocks or pebbles), as product damage may result.
•Do not use to pick up any liquids, toxic substances, flammable or combustible liquids such as gasoline or use in areas where they may be present.
•Do not place or drop the product into water or other liquids, if the product falls into water, immediately unplug it from the electrical outlet. Do not touch or reach into the water.
•Do not use this product while standing in water or on wet surfaces.
•Do not vacuum burning or smoking materials, such as lit cigarette butts, matches or hot ashes.
•Do not use on or near hot surfaces. Keep cord away from heated surfaces.
•Do not use without dirt bowl and filters in place.
•Turn off the switch before unplugging.
•Use only extension cords UL-rated or cUL at 15 amperes. Extension cords rated for less amperage may overheat. Care should be taken to arrange the cord so that the cord cannot be pulled or tripped over.
•Using improper voltage may result in damage to the motor and possible injury to the user. Correct voltage is listed on the rating label.
•Always wear the appropriate shoes and clothing while operating this product.
•Look on your hand vacuum and follow all label and marking instructions.
WARNINGS FOR BLOWER / INFLATOR OPERATION:
•The blower operation of this vacuum can result in foreign objects being blown into
eyes, which can result in eye damage. Always wear eye protection (not provided) when operating as blower.
•Do not permanently cover openings of blower / inflator accessories.
•Do not leave appliance unattended when inflating any items.
•Take care when using blower accessory, some surfaces may become warm.
WARNING: Do not point tool exhaust at self, bystanders or animals.
WARNING: Always unplug the product from the electrical outlet before assembling, opening or emptying the container, or connecting/disconnecting the attachments. 
CAUTION: Keep the suction intake opening free from obstruction at all times; otherwise the motor will overheat and product damage may result.
CAUTION:The hand vacuum is a very powerful unit. Before plugging cord into outlet make sure the switch is in the OFF position. Make sure to hold firmly when starting and in use.
CAUTION: NEVER EXCEED RECOMMENDED PRESSURE. The item being inflated may burst and cause injury. Soft inflatable material items will not have existing pressure rating. Be careful not to over-inflate.
CAUTION: Wear appropriate personal hearing protection during use. Under some conditions and duration of use, noise from this product may contribute to hearing loss.
IMPORTANT: Clean filters improves vacuum performance. Make sure all filters are completely clean before inserting back in the hand vacuum.
This appliance is intended for household use only and not for commercial or industrial use.
WARNING: Some household dust contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm such as asbestos and lead in lead based paint.
WARNING: This product contains chemicals, including lead, known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.
SAVE THESE INSTRUCTIONS
Features and accessories - HV9010 (fig. A)
1.Dust bowl
2.Dust bowl release button
3.On/off switch
5.Inflator tool
6.Brush tool
7.Cloth filter (HVF91)
8.Pre filter
Features and accessories - HV9010P (fig. A1)
1.Dust bowl
2.Dust bowl release button
3.On/off
4.Turbo brush
5.Extension hose
6.Cloth filter (HVF91)
7.Pre filter
B
D
E2
A |
3 |
6 |
5 |
1 |
8 |
A1 |
3 |
1 |
5 |
4 |
6 |
7 |
10 |
HV9010P |
HV9010 |
HV9010 |
E1 |
E3 |
POLARIZATION PLUGS
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If is still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
Assembly
WARNING: Make sure that the appliance is switched off and unplugged.
Attaching the accessories for vacuuming (HV9010) (fig. B)
The accessories provided can be used in various combinations, depending on the task:
a.General vacuuming / dusting
b.Vacuuming in confined spaces
c.Vacuuming upholstery or in corners
To attach, insert the appropriate accessory into the front of the appliance as shown.
Attaching the crevice and inflator tool for blowing and inflating (HV9010) (fig. C)
WARNING: When using the appliance for blowing / inflating purposes, wear eye protection. Keep the air intake free from obstructions to prevent the motor from overheating. Do not point the air outlet at yourself, bystanders or animals.
To attach the crevice or inflator tool:
•Turn the exhaust filter cover (8) counterclockwise to remove it from the appliance.
•Remove the filter (9) from the appliance.
•Insert the tool into the opening. Make sure that it fits snug against the rear of the appliance.
Attaching the flexible hose for blowing (HV9010P) (fig. C)
WARNING: When using the appliance for blowing purposes, wear eye protection. Keep the air intake free from obstructions to prevent the motor from overheating. Do not point the air outlet at yourself, bystanders or animals.
To attach the flexible hose:
•Turn the exhaust filter cover (8) counterclockwise to remove it from the appliance.
•Remove the filter (9) from the appliance.
•Insert the flexible hose into the opening. Make sure that it fits snug against the rear of the appliance.
Turbo brush accessory (HV9010P ONLY)
WARNING: Injury to pets. Do not use directly on animals.
CAUTION: Keep hair, loose clothing and all parts of body away from rotating brush. Your Hand Vac is supplied with an air driven Turbo Brush.
In order to maximize air suction when using the air driven turbo brush:
•Empty the dirt bowl frequently.
•Keep the filter clean (see “Cleaning the dust bowl and filter”).
•Keep the turbo brush free of hair and dirt (see “Cleaning the turbo brush”).
To attach turbo brush, insert brush adapter directly into the nozzle as shown in figure A1 or attach turbo brush to extension hose then to nozzle.
Note: Make sure accessory is securely attached before use.
Operation
WARNING: Before connecting to the power supply, make sure that the appliance is switched off.
Switching on and off
•To switch the tool on, set the on/off switch (3) to position I.
•To switch the tool off, set the on/off switch (3) to position O.
WARNING: Make sure the accessories are securely attached before switching on. Keep a firm grip on the appliance when switching on and during use.
Motor thermal safeguard
The motor of the appliance contains a thermal safeguard. This device automatically switches the appliance off in case of overheating. If this occurs, proceed as follows:
•Switch the appliance off and remove the plug from the wall socket.
•Allow the unit to cool. When the unit has cooled down, check and clean the filters.
•Re-insert the plug into the wall socket and switch the appliance on.
Cleaning the dust bowl and filter (fig. D)
WARNING: Make sure that the appliance is switched off and unplugged. When the dust bowl is full or the filters are clogged, empty the bowl and clean the filters. The filters are re-usable and should be cleaned regularly.
•Press the dust bowl release button (2) and remove the dust bowl (1).
•To remove the filter twist the filter holder in a clockwise direction. Remove the inner filter.
•Brush any loose dust off the filter.
•Remove any dust from the dust bowl.
•Wash the filters in warm, soapy water. The bowl and the filter holder can also be washed if necessary. Do not immerse the appliance in water.
•Make sure the dust bowl, filter holder and filter are completely dry.
•Refit the filter holder and inner filter.
•Refit the dust bowl onto the appliance, making sure the dust bowl clicks into place.
To clean the exhaust filter, proceed as follows
•Turn the exhaust filter cover (9) counterclockwise to remove it from the appliance.
•Remove the filter (10) from the appliance.
•Wash and dry the filter as described above.
•Refit the filter and replace the exhaust filter cover. Turn the cover clockwise to lock in position.
CAUTION: Never use the appliance without the filters. Optimum dust collection will only be achieved with clean filters and an empty dust bowl. If dust begins to fall
back out of the appliance after switching it off, this indicates that the dust bowl is full and must be emptied.
Cleaning the turbo brush
First remove the turbo brush from the unit. Press the button on the front of the brush and lift the top off. There may be some hair, dust, lint, etc. on the turbine wheel and or brush. Remove as much of this as possible. Once cleaned replace the top and snap back in place
(see figures E1, E2 and E3).
Replacing the filters
The filters should be replaced every 6 to 9 months and whenever worn or damaged. Replacement filters are available from your Black & Decker dealer (cat. no. HVF91).
•Remove the old filters as described above.
•Fit the new filters as described above.
Storage
•Wrap the power supply cord around the appliance.
•Store the appliance and the attachments in a dry location out of the reach of children.
Cleaning/Maintenance
WARNING: Before cleaning and maintenance, switch the appliance off
and unplug it.
From time to time wipe the appliance with a damp cloth. Do not use any abrasive or solvent-based cleaner. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.
|
TROUBLESHOOTING |
|
Problem |
Possible Cause |
Possible Solution |
• Unit will not start. |
• Cord not plugged in. |
• Plug tool into a working |
|
|
outlet. |
|
• Circuit fuse is blown. |
• Replace circuit fuse. |
|
|
(If the product repeatedly |
|
|
causes the circuit fuse to |
|
|
blow, discontinue use |
|
|
immediately and have it |
|
|
serviced at a Black & |
|
|
Decker service center or |
|
|
authorized servicer.) |
|
• Circuit breaker is tripped. |
• Reset circuit breaker. |
|
|
(If the product repeatedly |
|
|
causes the circuit breaker |
|
|
to trip, discontinue use |
|
|
immediately and have it |
|
|
serviced at a Black & |
|
|
Decker service center or |
|
|
authorized servicer.) |
|
• Cord or switch is damaged. |
• Have cord or switch |
|
|
replaced at Black & |
|
|
Decker Service Center or |
|
|
Authorized Servicer. |
|
• Filter is clogged. |
• Clean out bowl and filters. |
|
|
Press the dust bowl release |
|
|
button and remove the dust |
|
|
bowl. To remove the filter, |
|
|
twist the filter holder in a |
|
|
clockwise direction. Remove |
|
|
the inner filter and brush off |
|
|
any loose dust. Remove any |
|
|
dust from the dust bowl. |
|
|
Wash the filters in warm, |
|
|
soapy water. Make sure filters |
|
|
are dry before placing back in |
|
|
the vacuum. |
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK & DECKER help line at
1-800-544-6986.
Accessories
Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call:
1-800-544-6986
WARNING: The use of any accessory not recommended for use with this tool could be hazardous.
Service Information
Black & Decker offers a full network of company-owned and authorized service locations throughout North America. All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the
Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under "Tools—Electric" or call: 1-800-544-6986.
Full Two-Year Home Use Warranty
Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways.
The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a Black & Decker owned or authorized Service Center for repair or replacement at our option. Proof of purchase may be required. Black & Decker owned and authorized Service Centers are listed under "Tools–Electric" in the yellow pages of the phone directory.
This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state. Should you have any questions, contact the manager of your nearest Black & Decker Service Center. This product is not intended for commercial use..
Free warning label replacement: If your warning labels become illegible or are missing, call 1-800-544-6986 for a free replacement.
LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, check country specific warranty information contained in the packaging, call the local company or see the website for warranty information.
Imported by |
See ‘Tools-Electric’ |
Black & Decker (U.S.) |
|
Inc., |
– Yellow Pages – |
701 E. Joppa Rd. |
for Service & Sales |
Towson, MD 21286 |
|
U.S.A. |
|
Loading...