AEG SB2E 750 R ST, SB2E 720 RX User Manual [fr]

SB2E 720 RX SuperTorque,

SB2E 750 RX SuperTorque, SB2E 750 R SuperTorque,

SB2-750 SuperTorque

Original instructions Originalbetriebsanleitung Notice originale Istruzioni originali Manual original

Manual original

Oorspronkelijke gebruiksaanwijzing

Original brugsanvisning Original bruksanvisning Bruksanvisning i original Alkuperäiset ohjeet

Πρωτότυπο οδηγιών χρήσης Orijinal işletme talimatı Původním návodem k používání

Pôvodný návod na použitie Instrukcją oryginalną Eredeti használati utasítás Izvirna navodila

Originalne pogonske upute

Instrukcijām oriģinālvalodā

Originali instrukcija

Algupärane kasutusjuhend

Оригинальное руководство по эксплуатации

Оригинално ръководство за експлоатация

Instrucţiuni de folosire originale

Оригинален прирачник за работа

			Technical Data,Safety Instructions, Specified Conditions of Use,			Please read and save	ENGLISH		26
			EC-Declaration of Conformity, Mains connection, Maintenance, Symbols			these instructions!
			Technische Daten, Sicherheitshinweise, Bestimmungsgemäße Verwendung,			Bitte lesen und	DEUTSCH		28
			CE-Konformitätserklärung, Netzanschluss, Wartung, Symbole			aufbewahren!
			Caractéristiques techniques, Instructions de sécurité, Utilisation conforme aux			Prière de lire et de	FRANÇAIS		30
			prescriptions, Declaration CE de Conformité, Branchement secteur, Entretien, Symboles			conserver!
			Dati tecnici,Norme di sicurezza,Utilizzo conforme, Dicharazione di Conformità			Si prega di leggere le	ITALIANO		32
			CE, Collegamento alla rete, Manutenzione, Simboli			istruzioni e di conservarle!
			Datos técnicos, Instrucciones de seguridad,Aplicación de acuerdo a la finalidad,			Lea y conserve estas	ESPAÑOL		34
			Declaracion de Conformidad CE, Conexión eléctrica, Mantenimiento, Símbolos			instrucciones por favor!
			Declaração de Conformidade CE, Ligação à rede, Manutenção, Symbole			seu poder!	PORTUGUES		36
			Características técnicas, Instruções de segurança, Utilização autorizada,		Por favor leia e conserve em
			systeem, EC-Konformiteitsverklaring, Netaansluiting,Onderhoud, Symbolen			deze adviezen!	NEDERLANDS		38
			Technische gegevens, Veiligheidsadviezen, Voorgeschreven gebruik van het			Lees en let goed op
			Tekniske data, Sikkerhedshenvisninger, Tiltænkt formål,			Vær venlig at læse og	DANSK		40
			CE-Konformitetserklæring, Nettilslutning, Vedligeholdelse, Symboler			opbevare!
			Tekniske data, Spesielle sikkerhetshenvisninger, Formålsmessig bruk,			Vennligst les og	NORSK		42
			CE-Samsvarserklæring, Nettilkopling, Vedlikehold, Symboler			oppbevar!
			Tekniska data, Säkerhetsutrustning, Använd maskinen Enligt anvisningarna, CE-			Var god läs och tag tillvara
							SVENSKA		44
			Försäkran, Nätanslutning, Skötsel, Symboler			dessa instruktioner!
			Tekniset arvot, Turvallisuusohjeet, Tarkoituksenmukainen käyttö,			Lue ja säilytö!	SUOMI		46
			Todistus CE-standardinmukaisuudesta, Verkkoliitäntä, Huolto, Symbolit
			Фечнйкб уфпйчейб, Ейдйкеу хрпдейоейу буцблейбу, Чсзуз ухмцщнб ме фп укпрп рсппсйумпх,			Рбсбкблю дйбвЬуфе	ÅËËÇNÉÊÁ		48
			Дзлщуз рйуфпфзфбу ек, Ухндеуз уфп злекфсйкп дйкфхп, Ухнфзсзуз, Ухмвплб			фйт кбй цхлЬофе фйт!
			Teknik veriler, Güvenliğiniz için talimatlar, Kullanim, CE uygunluk beyanice, Şebeke			Lütfen okuyun ve
							TÜRKÇE		50
			bağlantisi, Bakim, Semboller			saklayın
			Technická data, Speciální bezpečnostní upozornění, Oblast využití,			Po přečtení uschovejte	ČESKY		52
			Ce-prohlášení o shodě, Připojení na sít, Údržba, Symboly
			CE-Vyhlásenie konformity, Sieťová prípojka, Údrzba, Symboly			uschovať!	SLOVENSKY		54
			Technické údaje, Špeciálne bezpečnostné pokyny, Použitie podľa predpisov,			Prosím prečítať a
			Dane techniczne, Specjalne zalecenia dotyczące bezpieczeństwa, Użytkowanie zgodne z	Prosimy o uważne przeczytanie i przestrzeganie			POLSKI		56
			przeznaczeniem, Świadectwo zgodności ce, Podłączenie do sieci, Gwarancja, Symbole		zaleceń zamie szczonych w tej instrukcji.
			Műszaki adatok, Különleges biztonsági tudnivalók, Rendeltetésszerű használat,			Olvassa el és	MAGYAR		58
			Ce-azonossági nyilatkozat, Hálózati csatlakoztatás, Karbantartás, Szimbólumok			őrizze meg
			Tehnični podatki, Specialni varnostni napotki, Uporaba v skladu z namembnostjo, Ce-			Prosimo preberite in	SLOVENSKO		60
			izjava o konformnosti, Omrežni priključek,Vzdrževanje,Simboli			shranite!
			Tehnički podaci, Specijalne sigurnosne upute, Propisna upotreba,			Molimo pročitati i	HRVATSKI		62
			CE-Izjava konformnosti, Priključak na mrežu, Održavanje, Simboli			sačuvati
			Tehniskie dati, Speciālie drošības noteikumi, Noteikumiem atbilstošs izmantojums,			Pielikums lietošanas	LATVISKI		64
			Atbilstība CE normām, Tīkla pieslēgums,Apkope, Simboli			pamācībai
			Techniniai duomenys, Ypatingos saugumo nuorodos, Naudojimas pagal paskirtį,			Prašome perskaityti ir	LIETUVIŠKAI		66
			CE Atitikties pareiškimas, Elektros tinklo jungtis, Techninis aptarnavimas, Simboliai			neišmesti!
			Tehnilised andmed, Spetsiaalsed turvajuhised, Kasutamine vastavalt otstarbele,		Palun lugege läbi ja hoidke		EESTI		68
			EÜ Vastavusavaldus, Võrku ühendamine, Hooldus, Sümbolid			alal!
			Технические данные, Рекомендации по технике безопасности,	Пожалуйста, прочтите и сохраните			РУССКИЙ		70
			Использование, Подключение к электросети, Обслуживание, Символы			настоящую! инструкцию
			Технически данни, Специални указания за безопасност, Използване по предназначение,			Моля прочетете и	БЪЛГАРСКИ		72
			СЕ-Декларация за съответствие, Свързване към мрежата, Поддръжка, Символи			запазете!
			Date tehnice, Instrucţiuni de securitate, Condiţii de utilizare specificate, Declaraţie			Va rugăm citiţi şi păstraţi	ROMÂNIA		74
			de conformitate,Alimentare de la reţea, Intreţinere, Simboluri			aceste instrucţiuni
			Технички Податоци, Упатство За Употреба, Специфицирани Услови На		Ве мoлиме прочитаjте го и
							МАКЕДОНСКИ		76
			Употреба, Еу-декларација За Сообразност, Главни Врски, Одржување, Симболи			чувајте го ова упатство!
			,						78
			, , , , ,
2									3

22	21	24
17
18	SB2E 720 RX	SERVICE
	SuperTorque
	SB2E 750 RX
	SuperTorque
	SB2E 750 R SuperTorque

19

12-

14

	SB2E 720 RX		SB2E 750 R		SB2-750
	SuperTorque		SuperTorque		SuperTorque
	SB2E 750 RX
	SuperTorque

8-

10

11

15

16

SB2E 720 RX

SuperTorque

SB2E 720 RX

SB2E 750 R

SB2-750

SB2E 750 RX

SuperTorque

SuperTorque

SuperTorque

SuperTorque

SB2E 750 RX

SB2E 750 R SuperTorque

SuperTorque

4

20

SB2E 720 RX

SuperTorque

SB2E 750 RX

SuperTorque

SB2E 750 R SuperTorque

23

5

1					1

SB2E 750 R SuperTorque	SB2E 720 RX SuperTorque
	SB2E 750 RX SuperTorque

2

2

3

3

4

5

10 Nm

6					7

1

1

SB2E 705 R	SB2E 720 RX SuperTorque
SB2-750 SuperTorque	SB2E 750 RX SuperTorque
	SB2E 750 R SuperTorque

2

2		SB2E 720 RX SuperTorque
		SB2E 750 RX SuperTorque

3

3

B<A

A

B

8					9

1

SB2E 720 RX SuperTorque

SB2E 750 RX SuperTorque

2

	k	cl
	c	i
		c
c			k
			c
			l
			i
			c
			k
			c
			l
			i
			c
			k

1

2

1

SB2E 750 R SuperTorque

2

	k	cl
	c	i
		c
c			k
			c
			l
			i
			c
			k
			c
			l
			i
			c
			k

1

2

10					11

1					1			2

SB2-750 SuperTorque

2

1	1	2

2	3

12					13

1			2

1

1 2

2

3

B

A

14					15

1 2

3 4

16

START

STOP

START

STOP

17

SB2E 720 RX SuperTorque

SB2E 750 RX SuperTorque

SB2E 750 R SuperTorque SB2E 720 RX SuperTorque

SB2E 750 RX SuperTorque

SB2E 750 R SuperTorque

F

E		D
		C
A	B

D	C

E

F

B A

18					19

20

21

SERVICE

1

2

3

4

5

6

7

22					23

TECHNICAL DATA		SB2E 750 RX ST	SB2E 720 RX ST	SB2-750 ST
		SB2E 750 R ST
Rated input.........................................................................	.............	750 W................................	720 W..........................	750 W
Output................................................................................	.............	375 W................................	360 W..........................	375 W
No-load speed, 1st gear.....................................................	........	0-1200 min-1..................	0-1200 min-1................	1200 min-1
No-load speed, 2nd gear....................................................	........	0-3400 min-1..................	0-3400 min-1................	3400 min-1
Speed under load max., 1st gear.......................................	.............	750 min-1.......................	770 min-1..................	750 min-1
Speed under load max., 2nd gear......................................	...........	2100 min-1.....................	2200 min-1................	2100 min-1
Rate of percussion under load max...................................	.......	31500 min-1...................	33000 min-1..............	31500 min-1
Static jamming moment *, 1st gear/2nd gear.....................	........	62/30 Nm......................	60/29 Nm.................	62/30 Nm
Drilling capacity in concrete, 1st gear/2nd gear...........................	..........	20/10 mm...........................	20/10 mm....................	20/10 mm
Drilling capacity in brick and tile, 1st gear/2nd gear.....................	..........	22/12 mm...........................	22/12 mm....................	22/12 mm
Drilling capacity in steel, 1st gear/2nd gear.................................	............	13/8 mm.............................	13/8 mm......................	13/8 mm
Drilling capacity in softwood, with Forstner bit in 1st gear.........	...............	40 mm................................	40 mm.........................	40 mm
Drilling capacity in softwood, with auger bit in 1st gear.............	...............	16 mm................................	16 mm.........................	16 mm
Drilling capacity in hard-wood with Forstner bit in 1st gear..........	...............	30 mm................................	30 mm.........................	30 mm
Drilling capacity in hard-wood, with auger bit in 1st gear.............	...............	12 mm................................	12 mm.........................	12 mm
Max. Spax‘s bit size in soft-wood.......................................	...........	6x90 mm.............................	6x90 mm......................	6x90 mm
Max. Spax‘s bit size in hard-wood......................................	...........	5x60 mm.............................	5x60 mm......................	5x60 mm
Drill opening range.............................................................	.........	1,5-13 mm..........................	1,5-13 mm...................	1,5-13 mm
Drive shank........................................................................	.......	1/2"x20 ..............................	1/2"x20 .......................	1/2"x20
Chuck neck diameter.........................................................	...............	43 mm................................	43 mm.........................	43 mm
Weight without cable..........................................................	..............	2,5 kg.................................	2,5 kg...........................	2,5 kg
Noise information
Measured values determined according to EN 60 745.
Typically, the A-weighted noise levels of the tool are:		101 dB (A)	101 dB (A)	101 dB (A)
Sound pressure level (K = 3 dB(A))..................................	.............
Sound power level (K = 3 dB(A))......................................	..............	112 dB (A)..........................	112 dB (A)....................	112 dB (A)
Wear ear protectors!
Vibration information
Total vibration values (vector sum in the three axes)
determined according to EN 60745.
Vibration emission value ah:		3,5 m/s2	3,5 m/s2	3,5 m/s2
Drilling into metal................................................................	..............
Uncertainty K......................................................................	..............	1,5 m/s2..............................	1,5 m/s2.......................	1,5 m/s2
Percussion drilling into concrete........................................	............	12,5 m/s2............................	12,5 m/s2.....................	12,5 m/s2
Uncertainty K......................................................................	..............	1,5 m/s2..............................	1,5 m/s2.......................	1,5 m/s2

WARNING

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.

The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.

WARNING! Read all safety warnings and all instructions, including those given in the accompanying brochure. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

SAFETY INSTRUCTIONS

Wear ear protectors. Exposure to noise can cause hearing loss.

Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.Appliances used at many different locations including open air must be connected via a current surge preventing switch.

Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Contact with a „live“ wire will also make exposed metal parts of the power tool „live“ and shock the operator.

Appliances used at many different locations including open air should be connected via a residual current device of 30 mA or less.

Always wear goggles when using the machine. It is recommended to wear gloves, sturdy non slipping shoes and apron.

Sawdust and splinters must not be removed while the machine is running.

Always disconnect the plug from the socket before carrying out any work on the machine.

Only plug-in when machine is switched off.

Keep mains lead clear from working range of the machine. Always lead the cable away behind you.

When working with large drill diameters, the auxiliary handle must be fastened in a right angle with the main handle (see illustrations, section Twisting the handle).

Do not use diamond core drills on hammer mode.

When working in walls ceiling, or floor, take care to avoid electric cables and gas or waterpipes.

SPECIFIED CONDITIONS OF USE

SYMBOLS

The electronic drill/screwdriver can be universally used for drilling, percussion drilling, screwdriving and cutting screw threads.

Do not use this product in any other way as stated for normal use.

MAINS CONNECTION

Connect only to single-phase a.c. current and only to the system voltage indicated on the rating plate. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II.

EC-DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. EN 60745, EN 55014-1, EN 55014-2, EN 61000- 3-2, EN 61000-3-3, in accordance with the regulations 98/37/ EC, 2004/108/EC

Winnenden, 2009-01-04	Rainer Kumpf
	Manager Product Development

MAINTENANCE

The ventilation slots of the machine must be kept clear at all times.

If the machine is mainly used for percussion drilling, regularly remove collected dust from the chuck. To remove the dust hold the machine with the chuck facing down vertically, and completely open and close the chuck. The collected dust will fall from the chuck. It is recommended to regularly use cleaner for the clamping jaws and the clamping jaw borings.

Use only AEG accessories and AEG spare parts. Should components need to be replaced which have not been described, please contact one of our AEG service agents (see our list of guarantee/service addresses).

If needed, an exploded view of the tool can be ordered. Please state the ten-digit No. as well as the machine type printed on the label and order the drawing at your local service agents or directly at: AEG Elektrowerkzeuge, Max Eyth Straße 10, D 71364 Winnenden, Germany.

Please read the instructions carefully before starting the machine.

Always disconnect the plug from the socket before carrying out any work on the machine.

Accessory - Not included in standard equipment, available as an accessory.

Do not dispose of electric tools together with household waste material! In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility.

24	ENGLISH		ENGLISH	25