AV Receiver
TX-NR609
Instruction Manual
Thank you for purchasing an Onkyo AV Receiver. Please read this manual thoroughly before making connections and plugging in the unit.
Following the instructions in this manual will enable you to obtain optimum performance and listening enjoyment from your new AV Receiver.
Please retain this manual for future reference.
Contents
Introduction ................................... |
2 |
Connections................................. |
12 |
Turning On & Basic Operations ......22
Advanced Operations ................. |
43 |
Controlling Other Components... |
63 |
Appendix ...................................... |
69 |
En
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING |
|
AVIS |
RISK OF ELECTRIC SHOCK |
|
RISQUE DE CHOC ELECTRIQUE |
DO NOT OPEN |
|
NE PAS OUVRIR |
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
1.Read these instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use this apparatus near water.
6.Clean only with dry cloth.
7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to
S3125A
avoid injury from tip-over.
13.Unplug this apparatus during lightning storms or when unused for long periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15.Damage Requiring Service
Unplug the apparatus from the wall outlet and refer servicing to qualified service personnel under the following conditions:
A.When the power-supply cord or plug is damaged,
B.If liquid has been spilled, or objects have fallen into the apparatus,
C.If the apparatus has been exposed to rain or water,
D.If the apparatus does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the apparatus to its normal operation,
E.If the apparatus has been dropped or damaged in any way, and
F.When the apparatus exhibits a distinct change in performance this indicates a need for service.
16.Object and Liquid Entry
Never push objects of any kind into the apparatus through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.
The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases shall be placed on the apparatus.
Don’t put candles or other burning objects on top of this unit.
17.Batteries
Always consider the environmental issues and follow local regulations when disposing of batteries.
18.If you install the apparatus in a built-in installation, such as a bookcase or rack, ensure that there is adequate ventilation.
Leave 20 cm (8") of free space at the top and sides and 10 cm (4") at the rear. The rear edge of the shelf or board above the apparatus shall be set 10 cm (4") away from the rear panel or wall, creating a flue-like gap for warm air to escape.
En
2
1.Recording Copyright—Unless it’s for personal use only, recording copyrighted material is illegal without the permission of the copyright holder.
2.AC Fuse—The AC fuse inside the unit is not userserviceable. If you cannot turn on the unit, contact your Onkyo dealer.
3.Care—Occasionally you should dust the unit all over with a soft cloth. For stubborn stains, use a soft cloth dampened with a weak solution of mild detergent and water. Dry the unit immediately afterwards with a clean cloth. Don’t use abrasive cloths, thinners, alcohol, or other chemical solvents, because they may damage the finish or remove the panel lettering.
4.Power WARNING
BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME, READ THE FOLLOWING SECTION CAREFULLY.
AC outlet voltages vary from country to country. Make sure that the voltage in your area meets the voltage requirements printed on the unit’s rear panel (e.g., AC 230 V, 50 Hz or AC 120 V, 60 Hz).
The power cord plug is used to disconnect this unit from the AC power source. Make sure that the plug is readily operable (easily accessible) at all times.
Pressing the [ON/STANDBY] button to select Standby mode does not fully disconnect from the mains. If you do not intend to use the unit for an extended period, remove the power cord from the AC outlet.
5.Preventing Hearing Loss Caution
Excessive sound pressure from earphones and headphones can cause hearing loss.
6.Batteries and Heat Exposure Warning
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat as sunshine, fire or the like.
7.Never Touch this Unit with Wet Hands—Never handle this unit or its power cord while your hands are wet or damp. If water or any other liquid gets inside this unit, have it checked by your Onkyo dealer.
8.Handling Notes
•If you need to transport this unit, use the original packaging to pack it how it was when you originally bought it.
•Do not leave rubber or plastic items on this unit for a long time, because they may leave marks on the case.
•This unit’s top and rear panels may get warm after prolonged use. This is normal.
•If you do not use this unit for a long time, it may not work properly the next time you turn it on, so be sure to use it occasionally.
For U.S. models
FCC Information for User CAUTION:
The user changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
For Canadian Models
NOTE: THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES-003.
For models having a power cord with a polarized plug: CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Modèle pour les Canadien
REMARQUE: CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À LA NORME NMB003 DU CANADA.
Sur les modèles dont la fiche est polarisée: ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
En
3
For British models
Replacement and mounting of an AC plug on the power supply cord of this unit should be performed only by qualified service personnel.
IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral Brown: Live
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.
IMPORTANT
The plug is fitted with an appropriate fuse. If the fuse needs to be replaced, the replacement fuse must approved by ASTA or BSI to BS1362 and have the same ampere rating as that indicated on the plug. Check for the ASTA mark or the BSI mark on the body of the fuse.
If the power cord’s plug is not suitable for your socket outlets, cut it off and fit a suitable plug. Fit a suitable fuse in the plug.
For European Models
Declaration of Conformity
We, ONKYO EUROPE ELECTRONICS GmbH LIEGNITZERSTRASSE 6, 82194 GROEBENZELL, GERMANY
declare in own responsibility, that the ONKYO product described in this instruction manual is in compliance with the corresponding technical standards such as EN60065, EN55013, EN55020 and EN61000-3-2, -3-3.
GROEBENZELL, GERMANY
K. MIYAGI
ONKYO EUROPE ELECTRONICS GmbH
Make sure you have the following accessories:
Indoor FM antenna ( page 21)
AM loop antenna ( page 21)
Power cord (Taiwan models) ( page 21)
Speaker cable labels ( page 13)
Speaker setup microphone ( page 31)
Remote controller (RC-803M) and two batteries (AA/R6)
(Note for China: The battery for the remote controller is not supplied for this unit.)
*In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operations are the same regardless of color.
■Installing the batteries
Note
• If the remote controller doesn’t work reliably, try replacing the batteries.
•Don’t mix new and old batteries or different
types of batteries.
•If you intend not to use
the remote controller for a long time, remove the batteries to prevent damage from leakage or corrosion.
•Remove expired batteries as soon as possible to prevent damage from leakage or corrosion.
■Aiming the remote controller
To use the remote controller, point it at the AV receiver’s remote control sensor, as shown below.
Remote control sensor
AV receiver
Approx. 16 ft. (5 m)
En
4
Contents
Introduction |
|
Important Safety Instructions ......................................... |
2 |
Precautions....................................................................... |
3 |
Supplied Accessories...................................................... |
4 |
Features ............................................................................ |
6 |
Front & Rear Panels......................................................... |
8 |
Front Panel..................................................................... |
8 |
Display............................................................................ |
9 |
Rear Panel ................................................................... |
10 |
Remote Controller.......................................................... |
11 |
Controlling the AV Receiver ......................................... |
11 |
Connections |
|
Connecting the AV Receiver ......................................... |
12 |
Connecting Your Speakers .......................................... |
12 |
About AV Connections ................................................. |
16 |
Connecting Components with HDMI ............................ |
17 |
Connecting Your Components ..................................... |
18 |
Connecting Onkyo uComponents ............................ |
20 |
Connecting a Recording Component ........................... |
20 |
Connecting the Antennas ............................................. |
21 |
Connecting the Power Cord ......................................... |
21 |
Turning On & Basic Operations |
|
Turning On/Off the AV Receiver ................................... |
22 |
Turning On ................................................................... |
22 |
Turning Off ................................................................... |
22 |
Playback.......................................................................... |
23 |
Selecting the Language for the Onscreen |
|
Setup Menus.............................................................. |
23 |
Playing the Connected Component.............................. |
23 |
Controlling Contents of USB or Network Devices ........ |
23 |
Understanding Icons on the Display............................. |
24 |
Playing an iPod/iPhone via USB .................................. |
24 |
Playing a USB Device .................................................. |
25 |
Listening to Internet Radio ........................................... |
25 |
Playing Music Files on a Server ................................... |
27 |
Remote Playback ......................................................... |
27 |
Listening to AM/FM Radio ............................................ |
28 |
Using Basic Functions .................................................. |
31 |
Using the Automatic Speaker Setup ............................ |
31 |
Using the Listening Modes ........................................... |
34 |
Using the Home Menu.................................................. |
40 |
Using the Sleep Timer.................................................. |
40 |
Setting the Display Brightness ..................................... |
40 |
Displaying Source Information ..................................... |
41 |
Changing the Input Display .......................................... |
41 |
Using the Music Optimizer ........................................... |
41 |
Muting the AV Receiver................................................ |
41 |
Using Headphones....................................................... |
42 |
Recording ..................................................................... |
42 |
Advanced Operations |
|
Advanced Setup ............................................................. |
43 |
On-screen Setup Menus............................................... |
43 |
Common Procedures in Setup Menu ........................... |
43 |
Input/Output Assign ...................................................... |
44 |
Speaker Setup.............................................................. |
45 |
Audio Adjust ................................................................. |
49 |
Source Setup................................................................ |
50 |
Listening Mode Preset.................................................. |
55 |
Miscellaneous............................................................... |
55 |
Hardware Setup............................................................ |
56 |
Remote Controller Setup .............................................. |
59 |
Lock Setup.................................................................... |
59 |
Using the Audio Settings .............................................. |
59 |
Zone 2.............................................................................. |
61 |
Making Zone 2 Connections......................................... |
61 |
Controlling Zone 2 Components................................... |
62 |
Controlling Other Components |
|
iPod/iPhone Playback via Onkyo Dock ........................ |
63 |
Using the Onkyo Dock.................................................. |
63 |
Controlling Your iPod/iPhone ....................................... |
64 |
Controlling Other Components..................................... |
66 |
Preprogrammed Remote Control Codes ...................... |
66 |
Looking up for Remote Control Code ........................... |
66 |
Entering Remote Control Codes................................... |
66 |
Remote Control Codes for Onkyo Components |
|
Connected via u...................................................... |
67 |
Resetting REMOTE MODE Buttons ............................. |
67 |
Resetting the Remote Controller .................................. |
67 |
Controlling Other Components ..................................... |
67 |
Appendix |
|
Troubleshooting ............................................................. |
69 |
Network/USB Features................................................... |
75 |
Firmware Update ............................................................ |
78 |
Connection Tips and Video Signal Path ...................... |
81 |
About HDMI..................................................................... |
83 |
Using an RIHD-compatible TV, Player, or Recorder ... |
84 |
Specifications ................................................................. |
86 |
Video Resolution Chart.................................................. |
87 |
To reset the AV receiver to its factory defaults, turn it on and, while holding down VCR/DVR, press
8ON/STANDBY ( page 69).
En
5
Amplifier
•100 Watts/Channel @ 8 ohms (FTC)
•160 Watts/Channel @ 6 ohms (IEC)
•175 Watts/Channel @ 6 ohms (JEITA)
•Optimum Gain Volume Circuitry
•H.C.P.S. (High Current Power Supply) Massive High Power Transformer
•Jitter Cleaning Circuit Technology
Processing
•THX Select2 Plus*1 Certified
•Incorporates Qdeo™*2 technology for HDMI Video Upscaling (to 4K Compatible).
•HDMI (Audio Return Channel, 3D, DeepColor, x.v.Color*3, Lip Sync, DTS*4-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD*5, Dolby Digital Plus, DSD and Multi-CH PCM)
•Dolby Pro Logic IIz*5 and Audyssey DSX™*6
•Non-Scaling Configuration
•A-Form Listening Mode Memory
•Direct Mode
•Pure Audio Mode (European, Australian and Asian models)
•Music Optimizer*7 for Compressed Digital Music files
•192 kHz/24-bit D/A Converters
•Powerful and Highly Accurate 32-bit Processing DSP
Connections
•6 HDMI*8 Inputs (1 on front panel) and 1 Output
•Onkyo pfor System Control
•4 Digital Inputs (2 Optical/2 Coaxial)
•Component Video Switching (2 Inputs/1 Output)
•Universal Port for the Dock for iPod®/iPhone®*9/HD Radio™*10 tuner module (North American models)/ DAB+ tuner module (European, Australian and Asian models)
•Banana Plug-Compatible Speaker Posts*11
•Powered Zone 2
•Bi-Amping Capability for FL/FR with SBL/SBR
•Analog RGB Video Input (D-sub 15) for PC
•Internet Radio Connectivity (SiriusXM Internet Radio/vTuner/Last.fm/Pandora/Rhapsody/Slacker/ Mediafly/Napster)
*Services available may vary depending on the region.
•Network Capability for Streaming Audio Files*12
•Front-Panel USB Input for Memory Devices and iPod®/iPhone®*9 models (Enables Display of Album Artwork)
Miscellaneous
•40 FM/AM Presets
•Audyssey 2EQ®*6 to correct room acoustic problems
•Audyssey Dynamic EQ®*6 for loudness correction
•Audyssey Dynamic Volume®*6 to maintain optimal listening level and dynamic range
•Crossover Adjustment (40/50/60/70/80/90/100/120/150/200 Hz)
•A/V Sync Control Function (up to 800 ms)
•Auto Standby Function
•On-Screen Display via HDMI
•Preprogrammed u-Compatible Remote
En
6
*1
THX and the THX logo are trademarks of THX Ltd. which may be registered in some jurisdictions. All rights reserved.
THX Select2 Plus
Before any home theater component can be THX Select2 Plus certified, it must pass a rigorous series of quality and performance tests. Only then can a product feature the THX Select2 Plus logo, which is your guarantee that the Home Theater products you purchase will give you superb performance for many years to come. THX Select2 Plus requirements define hundreds of parameters, including power amplifier performance, and preamplifier performance and operation for both digital and analog domains. THX Select2 Plus receivers also feature proprietary THX technologies (e.g., THX Mode) which accurately translate movie soundtracks for home theater playback.
*2 Qdeo and QuietVideo are trademarks of Marvell or its affiliates.
*3 “x.v.Color” is a trademark of Sony Corporation.
*4
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD Master Audio, and the DTS logos are trademarks of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.
*5
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, Surround EX and the double-D symbol are trademarks of Dolby Laboratories.
*6
Manufactured under license from Audyssey Laboratories™, Inc. U.S. and foreign patents pending. Audyssey 2EQ®, Audyssey Dynamic EQ®, Audyssey Dynamic Volume® and Audyssey DSX™ are registered trademarks and trademark of Audyssey Laboratories, Inc.
*7 Music Optimizer™ is a trademark of Onkyo Corporation.
*8
“HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.”
*9
iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Please note that the use of this accessory with iPod or iPhone may affect wireless performance.
*10
HD Radio™, HD Radio Ready™, and the HD Radio Ready logo are proprietary trademarks of iBiquity Digital Corporation.
This HD Radio Ready™ receiver is ready to receive HD Radio broadcasts when connected to the Onkyo UP-HT1 HD Radio tuner module (sold separately).
*11 In Europe, using banana plugs to connect speakers to an audio amplifier is prohibited.
*12 “DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance.”
*12 Windows and the Windows logo are trademarks of the Microsoft group of companies.
En
7
(North American and Taiwan models)
|
a |
|
|
|
|
|
|
b c d e |
|
|
|
|
|
|
f g h i j k |
|
|
|
|
|
|
|
|
|
|
|
|
|
l |
|||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
m n o p |
|
|
|
|
|
q |
|
|
|
|
|
|
|
|
rs t u v |
|||||||||||||||||||
(European, Australian and Asian models) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||
w |
|
|
|
|
|
|
|
|
x |
|||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
En
8
The page numbers in parentheses show where you can find the main explanation for each item.
a 8ON/STANDBY button (22) b ZONE 2, OFF buttons (62) c Remote control sensor (4) d Display (9)
e LISTENING MODE buttons (34)
fDIMMER button (North American and Taiwan models) (40)
g MEMORY button (29)
h TUNING MODE button (28) i SETUP button (43)
jTUNING, PRESET (28 to 29), arrow and ENTER buttons
k RETURN button
l MASTER VOLUME control and indicator (23)
mMUSIC OPTIMIZER button and indicator (North American and Taiwan models) (41, 60)
n PHONES jack (42)
o AUX INPUT HDMI jack (17)
p TONE and Tone Level buttons (59) q Input selector buttons (23)
r DISPLAY button (41) s VIDEO jack (18)
t USB port (18)
u SETUP MIC jack (31)
v HDMI THRU indicator (57)
wPURE AUDIO button and indicator (European, Australian and Asian models) (34)
xRT/PTY/TP button (European, Australian and Asian models) (30)
a b c d |
e f g |
|||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
h |
i j |
k |
l m no |
For detailed information, see the pages in parentheses.
a Speaker/channel indicators b Z2 (Zone 2) indicator (62)
c Listening mode and format indicators (34, 60) d 1, 3and cursor indicators (24)
e NET indicator (25, 58)
fTuning indicators
RDS indicator (excluding North American and Taiwan models) (29)
AUTO indicator (28) TUNED indicator (28)
FM STEREO indicator (28)
g Audio input indicators
h Bi AMP indicator (15, 46)
iAudyssey indicator (31, 50) Dynamic EQ indicator (50) Dynamic Vol indicator (51)
j Headphone indicator (42) k Message area
l MUTING indicator (41) m Volume level (23)
n USB indicator (24, 25) o SLEEP indicator (40, 54)
En
9
Rear Panel |
|
|
|
(North American, European, Australian and Asian models) |
|
||
a b cd |
e |
f |
g |
h |
i |
j klm |
n |
(Taiwan models) |
|
|
o |
a DIGITAL IN COAXIAL and OPTICAL jacks b COMPONENT VIDEO IN and OUT jacks c ETHERNET port
d FM ANTENNA jack and AM ANTENNA terminal e PC IN jack
f HDMI IN and OUT jacks
gPower cord (North American, European, Australian and Asian models)
h uREMOTE CONTROL jack
iComposite video and analog audio jacks (BD/DVD IN, VCR/DVR IN and OUT, CBL/SAT IN, GAME IN, PC IN, TV/CD IN)
j MONITOR OUT V jack
k ZONE 2 LINE OUT jacks
l SUBWOOFER PRE OUT jacks m UNIVERSAL PORT jack
nSPEAKERS terminals
(CENTER, FRONT, SURROUND, SURROUND BACK or FRONT HIGH, ZONE 2)
o AC INLET (Taiwan models)
See “Connecting the AV Receiver” for connection ( pages 12 to 21).
En
10
|
To control the AV receiver, press RECEIVER to |
|
|
select Receiver mode. |
|
a |
You can also use the remote controller to control |
|
Onkyo Blu-ray Disc/DVD player, CD player, and |
||
|
||
b |
other components. |
|
See “Entering Remote Control Codes” for more |
||
|
details ( page 66). |
|
|
For detailed information, see the pages in parentheses. |
ga 8RECEIVER button (22)
|
h |
b REMOTE MODE/INPUT SELECTOR buttons |
|
c |
(23) |
|
c Arrow q/w/e/rand ENTER buttons |
|
|
i |
d SETUP button (43) |
|
e Listening Mode buttons (34) |
|
|
d |
f DIMMER button (40) |
c |
|
g MUTING button (41) |
|
h DISPLAY button (41) |
|
a |
|
|
|
i VOL q/wbutton (23) |
|
|
|
|
d |
j |
j RETURN button |
|
|
k HOME button (40, 59) |
|
k |
l SLEEP button (40) |
e |
|
|
|
e |
|
f |
l |
|
b |
||
|
Controlling the tuner
To control the AV receiver’s tuner, press TUNER (or
RECEIVER).
You can select AM or FM by pressing TUNER repeatedly.
a Arrow q/wbuttons (28)
b D.TUN button (29)
c DISPLAY button
d CH +/– button (29)
e Number buttons (29)
En
11
Connecting the Speaker Cables
The following illustration shows which speaker should be connected to each pair of terminals. If you’re using only one surround back speaker, connect it to the SURROUND BACK or FRONT HIGH L terminals.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Surround |
Surround |
||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
right |
|
|
|
left |
||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Surround back/ |
Surround back/ |
Front right |
Front left |
Center |
Front high |
Front high |
|
|
|
right |
left |
|
|
|
Tip
•You can specify whether surround back or front high speakers are connected in the “Speaker Configuration” menu ( page 46) or during Audyssey 2EQ® Room Correction and Speaker Setup ( page 31).
■Screw-type speaker terminals
Strip 1/2" to 5/8" (12 to 15 mm) of insulation from the ends of the speaker cables, and twist the bare wires tightly, as shown.
■Banana Plugs (North American models)
1/2" to 5/8" (12 to 15 mm)
•If you are using banana plugs, tighten the speaker terminal before inserting the banana plug.
•Do not insert the speaker code directly into the center hole of the speaker terminal.
■Push-type speaker terminals |
|
|
|
|
|
|
|
|
|
|
|
Strip 3/8" to 1/2" (10 to 12 mm) of insulation from the ends of the |
3/8" to 1/2"(10 to 12 mm) |
||||||||||
speaker cables, and twist the bare wires tightly, as shown. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
En
12
Speaker Configuration
The following table indicates the channels you should use depending on the number of speakers that you have.
No matter how many speakers you use, a powered subwoofer is recommended for a really powerful and solid bass.
To get the best from your surround sound system, you need to set the speaker settings automatically
( page 31) or manually ( page 45).
Number of channels |
2 |
3 |
4 |
5 |
6 |
7 |
7 |
|
|
|
|
|
|
|
|
Front speakers |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Center speaker |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Surround speakers |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Surround back speaker*1*2 |
|
|
|
|
|
|
|
Surround back speakers*2 |
|
|
|
|
|
|
|
Front high speakers*2 |
|
|
|
|
|
|
|
*1 If you’re using only one surround back speaker, connect it to the SURROUND BACK or FRONT HIGH L terminals.
*2 Front high and surround back speakers cannot be used at the same time.
Attaching the Speaker Cable Labels
The speaker terminals are color-coded for identification purpose.
Speaker |
Color |
Front left, Front high left, Zone 2 left |
White |
|
|
Front right, Front high right, Zone 2 right |
Red |
|
|
Center |
Green |
|
|
Surround left |
Blue |
|
|
Surround right |
Gray |
|
|
Surround back left |
Brown |
|
|
Surround back right |
Tan |
The supplied speaker cable labels are also color-coded and you should attach them to the positive (+) side of each speaker cable in accordance with the table above. Then all you need to do is to match the color of each label to the corresponding speaker terminal.
Speaker Connection Precautions
Read the following before connecting your speakers:
•(North American and Taiwan models) You can connect speakers with an impedance of between 6 and 16 ohms. If you use speakers with a lower impedance, and use the amplifier at high volume levels for a long period of time, the built-in amp protection circuit may be activated.
•(European, Australian and Asian models) You can connect speakers with an impedance of between 4 and 16 ohms. If the impedance of any of the connected speakers is 4 ohms or more, but less than 6 ohms, be sure to set the minimum speaker impedance to “4ohms”
( page 46). If you use speakers with a lower impedance, and use the amplifier at high volume levels for a long period of time, the built-in protection circuit may be activated.
•Disconnect the power cord from the wall outlet before making any connections.
•Read the instructions supplied with your speakers.
•Pay close attention to speaker wiring polarity. In other words, connect positive (+) terminals only to positive (+) terminals, and negative (–) terminals only to negative (–) terminals. If you get them the wrong way around, the sound will be out of phase and will sound unnatural.
•Unnecessarily long, or very thin speaker cables may affect the sound quality and should be avoided.
•Be careful not to short the positive and negative wires. Doing so may damage the AV receiver.
•Make sure the metal core of the wire does not have contact with the AV receiver’s rear panel. Doing so may damage the AV receiver.
En
13
•Don’t connect more than one cable to each speaker terminal. Doing so may damage the AV receiver.
•Don’t connect one speaker to several terminals.
Using Dipole Speakers
You can use dipole speakers for the surround and surround back speakers. Dipole speakers output the same sound in two directions.
Dipole speakers typically have an arrow printed on them to indicate how they should be positioned. The surround dipole speakers (A) should be positioned so that their arrows point toward the TV/screen, while the surround back dipole speakers (B) should be positioned so that their arrows point toward each other, as shown.
Using a Powered Subwoofer
TV/screen |
|
A |
A |
B |
B |
To find the best position for your subwoofer, while playing a movie or some music with good bass, experiment by placing your subwoofer at various positions within the room, and choose the one that provides the most satisfying results. You can connect the powered subwoofer with two SUBWOOFER PRE OUT jacks respectively.
The same signal is output from each jack.
Tip
•If your subwoofer is unpowered and you’re using an external amplifier, connect the subwoofer pre out jack to an input on the amplifier.
LINE INPUT
LINE INPUT
Powered subwoofer
Corner position
1/3 of wall position
En
14
Bi-amping the Front Speakers
Important:
• When making the bi-amping connections, be sure to remove the jumper bars that link the speakers’ tweeter (high) and woofer (low) terminals.
• Bi-amping can be used only with speakers that support biamping. Refer to your speaker manual.
Bi-amping provides improved bass and treble performance. |
|
|
When bi-amping is used, the AV receiver is able to drive up |
|
|
to a 5.1 speaker system in the main room. |
|
|
Once you’ve completed the bi-amping connections as shown |
|
|
and turned on the AV receiver, you must set the speaker |
Tweeter (high) |
|
setting to enable bi-amping ( page 46). |
||
Woofer (low) |
||
|
Front right |
Front left |
En
15
Connecting AV components
HDMI cable |
|
: Video & Audio |
|
AV receiver |
|
Blu-ray Disc/ |
|
TV, projector, etc. |
DVD player |
Game console |
Other cables |
|
: Video |
|
||
|
|
: Audio |
|
|
AV receiver |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Blu-ray Disc/ |
|
|
|
|||||||
|
|
|
|
||||||||
TV, projector, etc. |
Game console |
||||||||||
DVD player |
•Before making any AV connections, read the manuals supplied with your AV components.
•Don’t connect the power cord until you’ve completed and double-checked all AV connections.
•Push plugs in all the way to make good connections (loose connections can cause noise or malfunctions).
•To prevent interference, keep audio and video cables away from power cords and speaker cables.
AV Cables and Jacks
Right!
Wrong!
Signal |
Cable |
Jack |
|
Description |
Video and |
HDMI |
|
HDMI |
HDMI connections can carry digital video and audio. |
Audio |
|
|
|
|
|
|
|
|
Video |
Component video |
Y |
|
|
|
|
|
PB |
|
|
PR |
Green
Component video separates the luminance (Y) and color
difference signals (PB, PR), providing the best picture Blue quality (some TV manufacturers label their component
video sockets slightly differently).
Red
Analog RGB |
|
This is a conventional analog interface to connect a PC and |
|
|
a display device (also called D-Sub or D-subminiature). |
Composite video |
Yellow |
Composite video is commonly used on TVs, VCRs, and |
V |
other video equipment. |
|
|
|
Audio |
Optical digital |
|
audio |
OPTICAL |
Optical digital connections allow you to enjoy digital |
||
|
|
|
sound such as PCM*, Dolby Digital or DTS. The audio |
|
|
|
|
|
|
|
quality is the same as coaxial. |
|
|
|
Coaxial digital |
Coaxial digital connections allow you to enjoy digital |
audio |
Orange sound such as PCM*, Dolby Digital or DTS. The audio |
|
quality is the same as optical. |
Analog audio (RCA)
L
R
White |
Analog audio connections (RCA) carry analog audio. |
|
|
Red |
|
*Available sampling rate for PCM input signal is 32/44.1/48/88.2/96 kHz. In case of an HDMI connection, 176.4/192 kHz is also available.
Note
•The AV receiver does not support SCART plugs.
•The AV receiver’s optical digital jacks have shutter-type covers that open when an optical plug is inserted and close when it’s removed. Push plugs in all the way.
Caution
•To prevent shutter damage, hold the optical plug straight when inserting and removing.
En
16
VCR or DVD recorder/Digital Video Recorder
Game console
TV, projector, etc.
Blu-ray Disc/DVD player
Personal computer |
Camcorder |
|
Satellite/cable set-top box, etc.
Connect your components to the appropriate jacks. The default input assignments are shown below.
: Assignment can be changed ( page 44).
Jack |
|
Components |
Assignable |
Input |
HDMI IN 1 |
Blu-ray Disc/DVD player |
|
|
|
|
|
|
HDMI IN 2 |
VCR or DVD recorder/Digital Video Recorder |
|
|
|
|
|
|
HDMI IN 3 |
Satellite/cable set-top box, etc. |
|
|
|
|
|
|
HDMI IN 4 |
Game console |
|
|
|
|
|
|
HDMI IN 5 |
Personal computer |
|
|
|
|
|
|
AUX INPUT HDMI |
Camcorder |
|
|
|
|
|
Output |
HDMI OUT |
TV, projector, etc. |
|
See also:
•“Connection Tips and Video Signal Path” ( page 81)
•“About HDMI” ( page 83)
•“Using an RIHD-compatible TV, Player, or Recorder” ( page 84)
Audio Return Channel (ARC) function
Audio Return Channel (ARC) function enables an HDMI capable TV to send the audio stream to the HDMI OUT of the AV receiver.
•This function can be used when:
–your TV is ARC capable, and
–the TV/CD input selector is selected, and
–“HDMI Control (RIHD)” is set to “On”( page 56), and
–“Audio Return Channel” is set to “Auto” ( page 57).
Tip
•To listen to audio received by the HDMI IN jacks through your TV’s speakers:
–Set the “HDMI Control (RIHD)” setting to “On” ( page 56) for an p-compatible TV.
–Set the “Audio TV Out” setting to “On” ( page 57) when the TV is not compatible with p, or the “HDMI Control (RIHD)” setting to “Off”.
–Set your Blu-ray Disc/DVD player’s HDMI audio output setting to PCM.
–To listen to TV audio through the AV receiver, see “Connecting Your Components” ( page 18).
Note
•When listening to an HDMI component through the AV receiver, set the HDMI component so that its video can be seen on the TV screen (on the TV, select the input of the HDMI component connected to the AV receiver). If the TV power is off or the TV is set to another input source, this may result in no sound from the AV receiver or the sound may be cut off.
•As the “Audio TV Out” setting is set to “On” ( page 57) to hear from your TV speakers, the sound will also be output from the AV receiver’s speakers if you adjust the volume of the AV receiver. Similarly, as the “HDMI Control (RIHD)” setting is set to “On”
( page 56) to hear from the speakers of an p-compatible TV, the AV receiver’s speakers will produce sound if you adjust the volume of the AV receiver, while the TV speakers will be muted. To stop the AV receiver’s speakers from producing sound, you can either change the settings on the AV receiver or on the TV, or turn down the volume of the AV receiver.
En
17
The on-screen setup menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the MONITOR OUT V or the COMPONENT VIDEO OUT, use the AV receiver’s display when changing settings.
A B C D E F G H
Connect your components to the appropriate jacks. The default input assignments are shown below. See “Connection Tips and Video Signal Path” for more information ( page 81).
|
|
|
|
|
|
: Assignment can be changed ( page 45). |
||
|
|
|
|
|
|
|
||
No. |
Jack/Port |
|
|
Components |
Assignable |
|
||
A |
|
USB, VIDEO |
|
|
iPod/iPhone (video playback) |
|
|
|
|
|
|
|
|
|
|
|
|
B |
|
USB*1 |
|
|
iPod/iPhone, MP3 player, USB flash drive |
|
|
|
C |
|
DIGITAL IN |
|
OPTICAL |
1 (GAME) |
Game console |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 (TV/CD) |
TV, CD player |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
COAXIAL |
1 (BD/DVD) |
Blu-ray Disc/DVD player |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 (CBL/SAT) |
Satellite/cable set-top box, RI dock, etc. |
|
|
|
|
|
|
|
|
|
|
|
D |
|
COMPONENT |
|
IN 1 (BD/DVD) |
|
Blu-ray Disc/DVD player, RI dock |
|
|
|
|
VIDEO |
|
|
|
|
|
|
|
|
|
IN 2 (CBL/SAT) |
|
Satellite/cable set-top box, RI dock, etc. |
|
||
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
OUT |
|
TV, projector, etc. |
|
|
|
|
|
|
|
|
|
|
|
E |
|
ETHERNET |
|
|
Router |
|
|
|
|
|
|
|
|
|
|
|
|
F |
|
MONITOR OUT |
|
|
TV, projector, etc. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BD/DVD IN |
|
|
Blu-ray Disc/DVD player |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VCR/DVR IN |
|
|
VCR or DVD recorder/digital video recorder, RI |
|
|
|
|
|
|
|
|
|
dock |
|
|
|
|
|
|
|
|
|
|
|
|
|
CBL/SAT IN |
|
|
Satellite/cable set-top box, etc. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GAME IN |
|
|
Game console, RI dock |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PC IN |
|
|
Personal computer |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TV/CD IN |
|
|
TV, CD player, cassette tape deck, MD, CD-R, |
|
|
|
|
|
|
|
|
|
Turntable*3, RI dock |
|
|
G |
|
PC IN*2 |
|
|
Personal computer |
|
|
|
H |
|
UNIVERSAL PORT |
|
Universal port option dock (UP-A1 etc.) |
|
|
||
|
|
|
|
|
|
|
|
|
Note |
|
|
|
|
|
|
|
|
*1 |
Do not connect the AV receiver’s USB port to a USB port on your computer. Music on your computer cannot be played through the |
|||||||
|
AV receiver in this way. |
|
|
|
|
|
||
*2 |
When you connect your personal computer to PC IN and select the PC input selector, the video of the personal computer is output |
|||||||
|
from HDMI OUT. However, if you have assigned HDMI IN to the PC input selector, the AV receiver will output signals received |
|||||||
|
from HDMI IN instead of signals from PC IN. To have the signals output from PC IN, select “- - - - -” for “PC” in the “HDMI |
|||||||
|
Input” setting ( page 44). |
|
|
|
|
|||
*3 |
Connect a turntable (MM) that has a phono preamp built-in. If your turntable (MM) doesn’t have it, you’ll need a commercially |
|||||||
|
available phono preamp. |
|
|
|
|
|
||
|
If your turntable has a moving coil (MC) type cartridge, you’ll need a commercially available MC head amp or MC transformer as |
|||||||
|
well as a phono preamp. See your turntable’s manual for details. |
|
|
En
18
•With connection C, you can enjoy Dolby Digital and DTS. (To record or listen the audio in Zone 2 as well, use C and F.)
•With connection F, you can listen to and record audio from external components while you are in Zone 2.
•With connection F, if your Blu-ray Disc/DVD player has both the main stereo and multichannel outputs, be sure to connect to the main stereo.
How to record a video source
With the connections described above, you cannot record the videos through the AV receiver. See “Recording” about connections for video recording ( page 42).
En
19
Connecting Onkyo uComponents
1 |
Make sure that each Onkyo component is |
|
connected with an analog audio cable (connection |
|
F in the hookup examples) ( page 18). |
2 |
Make the uconnection (see the illustration). |
3 |
If you’re using an RI Dock, or cassette tape deck, |
|
change the Input Display ( page 41). |
With u(Remote Interactive), you can use the following special functions:
System On/Auto Power On
When you start playback on a component connected via uwhile the AV receiver is on Standby, the AV receiver will automatically turn on and select that component as the input source.
Direct Change
When playback is started on a component connected via u, the AV receiver automatically selects that component as the input source.
Remote Control
You can use the AV receiver’s remote controller to control your other u-capable Onkyo components, pointing the remote controller at the AV receiver’s remote control sensor instead of the component. You must enter the appropriate remote control code first ( page 67).
R L
e.g., CD player |
ANALOG |
AUDIO OUT |
|
|
R L
ANALOG
AUDIO OUT
RI Dock
Note
•Use only ucables for uconnections. ucables are supplied with Onkyo components.
•Some components have two ujacks. You can connect either one to the AV receiver. The other jack is for connecting additional u-capable components.
•Connect only Onkyo components to ujacks. Connecting other manufacturer’s components may cause a malfunction.
•Some components may not support all ufunctions. Refer to the manuals supplied with your Onkyo components.
•While Zone 2 is on, the System On/Auto Power On and Direct Change ufunctions do not work.
See “Recording” for details on recording ( page 42).
L |
R |
AUDIO |
VIDEO |
IN |
IN |
VCR, DVD recorder, cassette tape deck, CDR, MD recorder, etc.
Note
•The AV receiver must be turned on for recording. Recording is not possible while it’s in standby mode.
•If you want to record directly from your TV or playback VCR to the recording VCR without going through the AV receiver, connect the TV/VCR’s audio and video outputs directly to the recording VCR’s audio and video inputs. See the manuals supplied with your TV and VCR for details.
•Video signals connected to composite video inputs can be recorded only via composite video outputs. For example, if your TV/VCR is connected to a composite video input, the recording VCR must be connected to a composite video output.
•The surround sound and DSP listening modes cannot be recorded.
•Copy-protected Blu-ray Discs and DVDs cannot be recorded.
•Sources connected to a digital input cannot be recorded. Only analog inputs can be recorded.
•DTS signals will be recorded as noise, so don’t attempt analog recording of DTS CDs or LDs.
•(European, Australian and Asian models) While the listening mode is set to Pure Audio, the video circuitry is turned off and therefore no video signals are processed. If you want to make recordings, select another listening mode.
En
20
This section explains how to connect the supplied indoor FM antenna and AM loop antenna.
The AV receiver won’t pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner.
Caution |
North American and |
European, Australian and |
• Be careful not to injure yourself when using |
Taiwan models |
Asian models |
thumbtacks. |
|
|
|
|
|
Insert the plug fully |
Insert the plug fully |
Push. |
Insert wire. |
Release. |
into the jack. |
into the jack. |
Assembling the AM loop antenna
Thumbtacks, etc.
AM loop antenna (supplied) |
Indoor FM antenna (supplied) |
Note
•Once your AV receiver is ready for use, you’ll need to tune into a radio station and position the antenna to achieve the best possible reception.
•Keep the AM loop antenna as far away as possible from your AV receiver, TV, speaker cables, and power cords.
Tip
•If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead.
•If you cannot achieve good reception with the supplied indoor AM loop antenna, try using it with a commercially available outdoor AM antenna.
1 (Taiwan models)
Connect the supplied power cord to the AV receiver’s AC INLET.
To AC wall outlet
2 Plug the power cord into an AC wall outlet.
Note
•Before connecting the power cord, connect all of your speakers and AV components.
•Turning on the AV receiver may cause a momentary power surge that might interfere with other electrical equipment on the same circuit. If this is a problem, plug the AV receiver into a different branch circuit.
•Do not use a power cord other than the one supplied with the AV receiver. The supplied power cord is designed exclusively for use with the AV receiver and should not be used with any other equipment.
•Never disconnect the power cord from the AV receiver while the other end is still plugged into a wall outlet. Doing so may cause an electric shock. Always disconnect the power cord from the wall outlet first, and then the AV receiver.
En
21
8ON/STANDBY
8RECEIVER
RECEIVER
1 Press 8ON/STANDBY on the front panel. or
Press RECEIVER followed by 8RECEIVER on the remote controller.
The AV receiver comes on, the display lights.
1 Press 8ON/STANDBY on the front panel. or
Press RECEIVER followed by 8RECEIVER on the remote controller.
The AV receiver will enter standby mode. To prevent any loud surprises when you turn on the AV receiver, always turn down the volume before you turn it off.
Tip
• For details on power management settings, see “Auto Standby” ( page 57).
En
22
The on-screen menus appear only on a TV that is connected to the HDMI OUT. If your TV is connected to the MONITOR OUT V or the COMPONENT VIDEO OUT, use the AV receiver’s display when changing settings.
This section describes the procedure for using the remote controller unless otherwise specified.
See “Controlling Other Components” about the operation of other components ( page 66).
Press USB or NET first.
You can determine the language used for the onscreen setup menus. See “Language” in the “OSD Setup”
( page 56).
Operating with the remote controller
1 Press RECEIVER followed by INPUT SELECTOR.
2 Start playback on the source component.
See also:
• “Playing an iPod/iPhone via USB” ( page 24)
• “Playing a USB Device” ( page 25)
• “Listening to Internet Radio” ( page 25)
• “Playing Music Files on a Server” ( page 27)
• “Remote Playback” ( page 27)
• “Listening to AM/FM Radio” ( page 28)
• “iPod/iPhone Playback via Onkyo Dock” ( page 63)
• “Controlling Other Components” ( page 66)
3 |
To adjust the volume, use VOL q/w. |
4 |
Select a listening mode and enjoy! |
|
See also: |
•“Using the Listening Modes” ( page 34)
•“Audyssey” ( page 50)
Operating on the AV receiver
1 |
Use the input selector buttons to select the input |
|
source. |
2 |
Start playback on the source component. |
3 |
To adjust the volume, use the MASTER VOLUME |
|
control. |
4 |
Select a listening mode and enjoy! |
h
i
aj
b
k c l
dm e n
fo
g |
p |
|
q |
aTOP MENU
This button displays the top menu for each media or service.
bq/wand ENTER
These buttons navigate through the menus. e/r
This button cycles through pages.
PLAYLIST e/r
In Standard Mode (iPod/iPhone), this button selects playlists.
c1
This button starts playback.
d7
This button selects the beginning of the current song. Pressing this button twice selects the previous song.
e5
This button fast-reverses the current song.
f3
This button pauses playback.
gSEARCH
You can toggle between the playback screen and the list screen during playback.
hDISPLAY
This button switches between song informations.
iALBUM +/–
In Standard Mode (iPod/iPhone), this button selects albums.
jMENU
This button returns to top menu of the Internet Radio service.
En
23
kRETURN
This button returns to the previous menu.
l4
This button fast-forwards the current song.
m6
This button selects the next song.
n2
This button stops playback.
oMODE
You can switch between Standard Mode and Extended Mode during iPod/iPhone playback.
pRANDOM
This button performs random playback.
qREPEAT
Press this button repeatedly to cycle through the repeat modes.
Note
•The buttons you can use will differ depending on the devices and media used for playback.
This section describes icons that appear on the display during media playback.
Displayed Icons
Icon Description
Folder
Track
Playback
Pause
Fast Forward
Fast Reverse
Artist
Album
Repeat One Track
Repeat Folder (USB Device)
Repeat
Shuffle
Shuffle Album (iPod/iPhone)
This section explains how to play music/video files on the iPod/iPhone.
Compatible iPod/iPhone models Made for:
iPod touch (1st, 2nd, 3rd and 4th generation), iPod classic, iPod with video, iPod nano (1st, 2nd, 3rd, 4th, 5th and 6th generation), iPhone 4, iPhone 3GS, iPhone 3G, iPhone
1 |
Press USB to select the “USB” input. |
2 |
Connect the USB cable that comes with the |
|
iPod/iPhone to the USB port on the front of the AV |
|
receiver. |
|
While reading the contents of your iPod/iPhone, the |
|
message “Connecting...” appears on the display. |
|
The USB indicator lights. It will flash if the AV |
|
receiver cannot read the iPod/iPhone. |
3 |
Press MODE repeatedly to switch to Extended |
|
Mode (Music) or Extended Mode (Video). |
A list of your iPod/iPhone model’s contents appears. To open a folder, use q/wto select it, and then press
ENTER.
Tip
•With the default settings, the iPod/iPhone is operated in Standard Mode.
•Pressing MODE repeatedly switches back to Standard Mode.
•When you disconnect the iPod/iPhone, the AV receiver stores the mode. This means that if you disconnect when in Extended Mode (Music), the AV receiver will start in Extended Mode (Music) the next time you connect the iPod/iPhone.
•You can also use q/w, ENTER and TUNING MODE buttons on the front panel. TUNING MODE allows you to switch modes.
•When connecting your iPod/iPhone with a USB cable, we recommend you use an official USB cable from Apple Inc.
4 Use q/wto select a music/video file, and press ENTER or 1to start playback.
Note
•Do not disconnect the USB device or USB cable that comes with iPod/iPhone to the USB port at the front of the AV receiver, while the message “Connecting...” appears on the display.
•If you connect an iPod or iPhone to the USB port on this device, no sound will be output from the headphones jack.
En
24
Extended Mode (Music) control
The music content information is displayed (lists are displayed), and you can control the music content while looking at the screen.
Top screen list:
Playlists, Artists, Albums, Genres, Songs, Composers, Shuffle Songs, Now Playing.
Extended Mode (Video) control
The video content information is displayed (lists are displayed), and you can control the video content while looking at the screen.
Top screen list:
Movies, Music Videos, TV Shows, Video Podcasts, Rentals.
Note
•To view the video contents of your iPod/iPhone, connect it to the USB port and VIDEO jack on the AV receiver’s front panel, using the official Apple Composite AV Cable.
•Depending on your iPod/iPhone model and generation, the displayed items may vary and the support for Extended Mode (Video) is not guaranteed.
Standard Mode control
The content information is not displayed, but can be operated using the iPod/iPhone or the remote controller (USB).
Note
•The following iPod models are not supported in Standard Mode. (They can only be controlled in Extended Mode).
–iPod with video
–iPod nano (1st generation)
This section explains how to play music files from a USB device (e.g., USB flash drives and MP3 players).
See also:
• “Network/USB Features” ( page 75).
1 |
Press USB to select the “USB” input. |
2 |
Plug your USB device into the AV receiver’s USB |
|
port. |
|
The USB indicator lights. It will flash if the AV |
|
receiver cannot read the USB device. |
3 |
Press ENTER. |
|
A list of the device’s contents appears. To open a |
|
folder, use q/wto select it, and then press ENTER. |
4 |
Use q/wto select a music file, and press ENTER or |
|
1to start playback. |
Note
•Do not disconnect the USB device or USB cable that comes with iPod/iPhone to the USB port at the front of the AV receiver, while the message “Connecting...” appears on the display.
You need to connect the AV receiver to your home network ( page 75).
You can select Internet radio stations by connecting to the AV receiver from your computer and selecting stations in your web browser.
Internet radio URLs in the following formats are supported: PLS, M3U, and podcast (RSS). However, depending on the type of data or audio format used by the Internet radio station, you may not be able to listen to some stations.
Note
•Services available may vary depending on the region. See the separate instructions for more information.
Listening to vTuner Internet Radio
This unit includes the full vTuner Internet Radio Service at no additional charge. Once you have connected your unit to the Internet you can select vTuner Internet Radio to search for and play Internet radio stations and podcasts at any time. To enhance your Internet radio experience, the http://onkyo.vtuner.com/ portal is available to you as an easy way to browse to find stations, set up/organize your favorites, add your own stations, get help, etc. After the first time you try vTuner Internet Radio on your unit you can use the MAC Address of your unit to create a member login account (email address and password) on the http://onkyo.vtuner.com/ portal. To verify your MAC Address, please see “Network” ( page 58).
1 Press NET.
The “NET” screen appears, and the NET indicator lights. If it flashes, verify that the Ethernet cable is firmly connected to the AV receiver.
2 Use q/w/e/rto select “vTuner Internet Radio” and then press ENTER.
En
25
3 Use q/wto select a program and then press
ENTER.
Playback starts.
My Music
0 : 11
Greate Artist
My Favorite
Press MENU to enable selection from the following menu items.
`Stations like this:
Stations like the one currently being played back are displayed.
`Add to My Favorites:
Adds a station to My Favorites list.
Press TOP MENU to go to the top menu of the Internet Radio services.
Tip
•By pressing SEARCH, you can toggle between the playback screen and the radio list screen.
Listening to Other Internet Radio
To listen to other internet radio stations, insert the following step after step 1 in the “Listening to vTuner Internet Radio” section.
1 |
On your computer, start your web browser and |
|
|
enter the AV receiver’s IP address in the browser’s |
|
|
Internet address (URL) field. |
|
|
The browser connects to the AV receiver (WEB |
|
|
Setup Menu). |
|
|
|
|
|
Note |
|
|
• The AV receiver’s IP address is shown on “IP Address” |
|
|
( page 58). |
|
|
• If you’re using DHCP, your router may not always allocate |
|
|
the same IP address to the AV receiver, so if you find that |
|
|
you can’t connect to the AV receiver, recheck the AV |
|
|
receiver’s IP address on the “Network” screen. |
|
2 |
Click on the “My Favorites” tab. |
|
3 |
Enter the preset name and Internet address |
|
|
(URL). |
|
4 |
Click “Save” to save the Internet radio station. |
|
5 |
The Internet radio station is then added to “My |
|
|
Favorites”. |
Registering My Favorites*1
You can add the currently playing song or station to the “My Favorites”. You can save up to 40 Internet radio stations.
Once you’ve added a station to the list, simply select it in the “My Favorites” menu, and then press ENTER to start playback.
*1 From the search results you can save the stations and songs but cannot listen to them directly.
Top menu of Internet Radio
`Create new station:
Add a favorite station or Internet radio to the My Favorites.
`Rename this station:
You can rename the stations and songs saved in “My Favorites” list.
`Delete from My Favorites:
|
You can delete the stations and songs saved in “My |
|
Favorites” list. |
1 |
Press MENU with the station selected or while a |
a |
|
|
song is playing. |
2 |
Use q/wto select “Add to My Favorites”, and press |
|
ENTER. |
3 |
Use q/w/e/rto select “OK”, and then press |
|
ENTER. |
Tip
•If you choose to rename the station, see “Name Edit”
( page 52).
En
26
You need to connect the AV receiver to your home network ( page 75).
This section explains how to play music files on a computer or media server through the AV receiver (Server Playback).
1 |
Start your computer or media server. |
|
2 |
Press NET. |
|
|
The “NET” screen appears. The NET indicator |
|
|
lights. If it flashes, confirm the network connection. |
|
3 |
Use q/w/e/rto select “dlna”, and press ENTER. |
|
|
|
|
|
Tip |
|
|
• To go back to the previous screen, press RETURN. |
|
4 |
Use q/wto select a server, and then press ENTER. |
|
|
The menu is displayed according to the server |
|
|
functions. |
Note
•The search function does not work with media servers which do not support this function.
•Photos and movies stored on a media server cannot be accessed from the AV receiver.
•Depending on the sharing settings in the media server, the AV receiver may not able to access the content. See the instruction manual of the media server.
5 Use q/wto select an item, and then press ENTER or 1to start playback.
My favorite song 1 0 : 11
Artist name My favorite album
Note
•Depending on the media server, 5/4/3may not work.
•If the message “No Item.” appears, this means that no information can be retrieved from the server. In this case, check your server, network, and AV receiver connections.
Windows Media Player 11 Setup
This section explains how to configure Windows Media Player 11 so that the AV receiver can play the music files stored on your computer.
1 |
Start Windows Media Player 11. |
2 |
On the “Library” menu, select “Media Sharing”. |
|
The “Media Sharing” dialog box appears. |
3 |
Select the “Share my media” check box, and then |
|
click “OK”. |
4 |
Select the AV receiver in the list, and then click |
|
“Allow”. |
5 |
Click “OK” to close the dialog box. |
This completes the Windows Media Player 11 configuration.
You can now play the music files in your Windows Media Player 11 library through the AV receiver.
Tip
•Windows Media Player 11 can be downloaded for free from the Microsoft web site.
You need to connect the AV receiver to your home network ( page 75).
Remote Playback means you can play the music files stored on a media server or personal computer with the AV receiver by operating the controller device in the home network.
Windows Media Player 12 Setup
This section explains how to configure Windows Media Player 12 so that the AV receiver can play the music files stored on your personal computer.
1 |
Start Windows Media Player 12. |
2 |
On the “Stream” menu, select “Turn on media |
|
streaming”. |
|
A dialog box appears. |
3 |
Move your cursor and click on “Turn on media |
|
streaming”. |
|
A list of media server appears. Wording may vary |
|
slightly depending on the network location. |
4 |
Select the product in the list, and then click |
|
“Allowed”. |
5 |
Click “OK” to close the dialog box. |
This completes the Windows Media Player 12 configuration.
You can now play the music files in your Windows Media Player 12 library.
En
27