Zoom G5n Effect Types and Parameters
Effect Types and Parameters
© 2015 ZOOM CORPORATION
Manufacturer names and product names are trademarks or registered trademarks of their respective owners. The names are used only to illustrate
sonic characteristics and do not indicate any affiliation with the Zoom Corporation.
Effect explanation overview
Pedal control possible icon
Effect type Effect explanation Parameter range
PDL Delay The expression pedal controls the delay input level of this effect.
InLvl Adjusts the delay input level. 0 – 100 P
Time Sets the delay time. 1 – 4000
F. B Adjusts the feedback amount. 0 – 100
Mix Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
ParameterEffect Screen
Contents
DYNAMICS
FILTER
DRIVE
AMP
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
CABINET
MODULATION
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Parameter explanation
Tempo synchronization possible icon
3
3
5
7
8
9
SFX
DELAY
REVERB
PEDAL
RHYTHM
LOOPER
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Additional tables
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
2 3
10
11
12
13
15
15
16
DYNAMICS / FILTER
[ DYNAMICS ]
Comp This compressor in the style of the MXR Dyna Comp.
Sense Adjusts the compressor sensitivity.
ATTCK Sets compressor attack speed to Fast or Slow.
Tone Adjusts the tone.
VOL Adjusts the volume.
RackComp This compressor allows more detailed adjustment than Comp.
THRSH Sets the level that activates the compressor. 0 – 50
Ratio Adjusts the compression ratio. 1 – 10
ATTCK Sets compressor attack speed. 1 – 10
VOL Adjusts the volume. 0 – 100
SlowATTCK This effect slows the attack of each note, resulting in a violin-like performance.
Time Adjusts the attack time. 1 – 50
Curve Set the curve of volume change during attack. 0 – 10
Tone Adjusts the tone. 0 – 100
VOL Adjusts the volume. 0 – 100
ZNR
ZOOM's unique noise reduction cuts noise during pauses in playing without affecting
the tone.
DETCT Sets control signal detection level.
Depth Sets the depth of noise reduction. 0 – 100
THRSH Adjusts the effect sensitivity. 0 – 100
Decay Adjust the envelope release. 0 – 100
MuteSW This effect allows you to mute the volume using the foot switch.
Edge
Speed Adjust the recovery time from muting. 0 – 100
INVRT Sets the foot switch control direction.
ON/OFF
Sets how smoothly the volume changes. As the parameter value increases, the change
becomes smoother.
Sets the foot switch function.
0 –10
SLOW , FAST
0 – 10
0 – 100
GTRIN ,
EFXIN
0 – 100
NORMAL ,
INVERT
LATCH ,
UnLATCH ,
TRGGR
[ FILTER ]
AutoWah This effect varies wah in accordance with picking intensity.
Mode Sets direction of movement of the filter. DOWN , UP
Sense Adjusts the sensitivity of the effect. 1 – 10
RESO Sets effect resonance. 0 – 10
VOL Adjusts the volume. 0 – 100
Resonance This effect varies the resonance filter frequency according to picking intensity.
Mode Sets direction of movement of the filter. DOWN , UP
Sense Adjusts the sensitivity of the effect. 1 – 10
RESO Sets effect resonance. 0 – 10
VOL Adjusts the volume. 0 – 100
Cry This effect varies the sound like a talking modulator.
Range Adjusts the frequency range processed by the effect. 1 – 10
RESO Sets effect resonance. 0 – 10
Sense Adjusts the sensitivity of the effect.
BAL Adjusts the balance between original and effect sounds. 0 – 100
-10 – -1 ,
1 – 10
FILTER
SeqFLTR The sequence filter has the flavor of a Z.Vex Seek-Wah.
Step Adjusts number of sequence steps. 2 – 8
PTTRN Sets effect pattern. 1 – 8
Speed Sets the speed of the modulation. 1 – 50
RESO Sets effect resonance. 0 – 10
Gt GEQ This mono graphic equalizer has 6 bands that suit guitar frequencies.
160 Boosts or cuts the low (160 Hz) frequency band. -12 – 12
400 Boosts or cuts the low (400 Hz) frequency band. -12 – 12
800 Boosts or cuts the low (800 Hz) frequency band. -12 – 12
3.2k Boosts or cuts the low (3.2 kHz) frequency band. -12 – 12
6.4k Boosts or cuts the low (6.4 kHz) frequency band. -12 – 12
12k Boosts or cuts the low (12 kHz) frequency band. -12 – 12
VOL Adjusts the volume. 0 – 100
CH SEL
Gt GEQ7 This mono graphic equalizer has 7 bands that suit guitar frequencies.
1.6k Boosts or cuts the low (1.6 kHz) frequency band. -12 – 12
3.2k Boosts or cuts the low (3.2 kHz) frequency band. -12 – 12
6.4k Boosts or cuts the low (6.4 kHz) frequency band. -12 – 12
VOL Adjusts the volume. 0 – 100
St Gt GEQ This stereo graphic equalizer has 6 bands that suit guitar frequencies.
3.2k Boosts or cuts the low (3.2 kHz) frequency band. -12 – 12
6.4k Boosts or cuts the low (6.4 kHz) frequency band. -12 – 12
VOL Adjusts the volume. 0 – 100
CH SEL
ParaEQ This is a 1-band parametric equalizer.
FREQ Sets the frequency of the equalizer. 20 – 20k
Gain Adjusts the gain. -12 – 12
VOL Adjusts the volume. 0 – 100
EG FLTR This filter effect is controlled using the control switch.
FREQ1 Sets the frequency when the control switch is off. 0 – 100
FREQ2 Sets the frequency when the control switch is on. 0 – 100
RESO Sets effect resonance. 0 – 100
Type Sets filter type.
Speed Sets the speed of the modulation. 0 – 100
BAL Adjusts the balance between original and effect sounds. 0 – 100
VOL Adjusts the volume. 0 – 100
CNTRL
Sets the control switch function.
100 Boosts or cuts the low (100 Hz) frequency band. -12 – 12
200 Boosts or cuts the low (200 Hz) frequency band. -12 – 12
400 Boosts or cuts the low (400 Hz) frequency band. -12 – 12
800 Boosts or cuts the low (800 Hz) frequency band. -12 – 12
160 Boosts or cuts the low (160 Hz) frequency band. -12 – 12
400 Boosts or cuts the low (400 Hz) frequency band. -12 – 12
800 Boosts or cuts the low (800 Hz) frequency band. -12 – 12
12k Boosts or cuts the low (12 kHz) frequency band. -12 – 12
Sets the control switch function.
Q Adjusts equalizer Q. 0.5 – 16
Sets the control switch function.
LATCH ,
UnLATCH
LATCH ,
UnLATCH
HPF2 –
LPF4
LATCH ,
UnLATCH ,
TRGGR
4 54 5
DRIVE
[ DRIVE ]
TS Drive Simulation of the Ibanez TS808.
Gain
Boost
Tone
VOL
EP Stomp This models the Maestro Echoplex preamp.
Gain Adjusts the gain. 0 – 100
Bass Adjusts volume of low frequencies. -10 – 10
Treble Adjusts volume of high frequencies. -10 – 10
VOL Adjusts the volume. 0 – 100
RC Boost This booster covers sounds ranging from clean boosts to light drives.
Gain Adjusts the gain. 0 – 100
Bass Adjusts volume of low frequencies. 0 – 100
Treble Adjusts volume of high frequencies. 0 – 100
VOL Adjusts the volume. 0 – 100
GoldDrive This effect models a famous gold overdrive boutique pedal.
Gain Adjusts the gain. 0 – 100
Bass Adjusts volume of low frequencies. 0 – 100
Treble Adjusts volume of high frequencies. 0 – 100
VOL Adjusts the volume. 0 – 100
SweetDrv This effect models a sweet sounding overdrive.
Gain Adjusts the gain. 0 – 100
Tone Adjusts volume of high frequencies 0 – 100
Focus Adjusts volume of middle frequencies. 0 – 100
VOL Adjusts the volume. 0 – 100
DYN Drive This effect easily achieves the warm drive tone of a tube amp.
Gain Adjusts the gain. 0 – 100
Tone Adjusts the tone. 0 – 100
Mode Sets the sound style.
VOL Adjusts the volume. 0 – 100
RedCrunch Use this effect for the famous "brown sound."
Gain Adjusts the gain. 0 – 100
Tone Adjusts the tone. 0 – 100
PRSNC Adjusts volume of super-high frequencies. 0 – 100
VOL Adjusts the volume. 0 – 100
MetalWRLD
Simulation of the BOSS Metal Zone, which is characterized by long sustain and a
powerful lower midrange.
Gain Adjusts the gain. 0 – 100
Bass Adjusts volume of low frequencies. 0 – 100
Treble Adjusts volume of high frequencies. 0 – 100
VOL Adjusts the volume. 0 – 100
TB MK1.5 This is a classic fuzz effect.
ATTCK Adjusts the gain. 0 – 100
Tone Adjusts the tone. 0 – 100
Color Sets the sound color. 1 , 2
VOL Adjusts the volume. 0 – 100
Adjusts the gain. 0 – 100
Turns boost ON/OFF. OFF , ON
Adjusts the tone. 0 – 100
Adjusts the volume. 0 – 100
COMBO ,
STAC K
DRIVE
OctFuzz This fuzz effect adds an octave above.
Boost Adjusts the gain. 0 – 100
Color Sets the sound color. 1 , 2
Tone Adjusts the tone. 0 – 100
VOL Adjusts the volume. 0 – 100
SpotBoost This booster enables flexible control.
Boost Adjusts the gain. 0 – 100
Bass Adjusts volume of low frequencies. -10 – 10
Treble Adjusts volume of high frequencies. -10 – 10
ON/OFF Sets the foot switch function.
Aco.Sim
This effect changes the tone of an electric guitar to make it sound like an acoustic
guitar.
Top Adjusts the unique string tone of acoustic guitars. 0 – 100
Body Adjusts the body resonance of acoustic guitars. 0 – 100
Tone Adjusts the tone. 0 – 100
VOL Adjusts the volume. 0 – 100
LATCH ,
UnLATCH
6 76 7
Loading...