MICRO COMPONENT SYSTEM RDX-E600MK2
RX-E600MK2
SERVICE MANUAL
This Service Manual describes only the items that differ from RX-E600/NX-E400’s. For the items not described in this Service Manual, refer to RX-E600/NX-E400 100923 Service Manual.
The RDX-E600MK2 is composed of the RX-E600MK2 and the DVD-E600MK2. This service manual is for the RX-E600MK2.
For the DVD-E600MK2 service manual, please refer to the following publication number:
DVD-E600MK2 100984
IMPORTANT NOTICE
This manual has been provided for the use of authorized YAMAHA Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifically YAMAHA Products, are already known and understood by the users, and have therefore not been restated.
WARNING: Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury, destruction of expensive components, and failure of the product to perform as specified. For these reasons, we advise all YAMAHA product owners that any service required should be performed by an authorized YAMAHA Retailer or the appointed service representative.
IMPORTANT: The presentation or sale of this manual to any individual or firm does not constitute authorization, certification or recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service departments of YAMAHA are continually striving to improve YAMAHA products. Modifications are, therefore, inevitable and specifications are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the distributor's Service Division.
WARNING: Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT: Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
E600MK2-RX
■ CONTENTS |
|
TO SERVICE PERSONNEL ........................................... |
2 |
FRONT PANEL ............................................................... |
3 |
REAR PANELS ............................................................... |
3 |
REMOTE CONTROL PANEL |
......................................... 3 |
PARTS LIST ................................................................ |
4~7 |
|
|
|
1 0 0 9 8 3 |
2005 |
All rights reserved. |
|
This manual is copyrighted by YAMAHA and may not be copied or |
redistributed either in print or electronically without permission.
P.O.Box 1, Hamamatsu, Japan
'05.10
RX-E600MK2
RX-E600MK2
1.Critical Components Information
Components having special characteristics are marked s and must be replaced with parts having specifications equal to those originally installed.
2.Leakage Current Measurement (For 120V Models Only) When service has been completed, it is imperative to verify that all exposed conductive surfaces are properly insulated from supply circuits.
●Meter impedance should be equivalent to 1500 ohms shunted by 0.15 F.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AC LEAKAGE |
||
WALL |
EQUIPMENT |
|
|
|
|
|
|
|
|
|
|
TESTER OR |
|||||||||
OUTLET |
UNDER TEST |
|
|
|
|
|
|
|
|
|
|
EQUIVALENT |
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
INSULATING
TABLE
●Leakage current must not exceed 0.5mA.
●Be sure to test for leakage with the AC plug in both polarities.
WARNING: CHEMICAL CONTENT NOTICE!
The solder used in the manufacturing process except soldering of the P.C.B. ass'y contains LEAD. In addition, other electrical/electronic and /or plastic (where applicable) components may also contain traces of chemicals found by the California Health and Welfare Agency (and possibly other entities) to cause cancer and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHATSOEVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food.
About Lead Free Solder
The P.C.B.s installed in this unit are soldered using the following solder.
|
SIDE A |
|
SIDE B |
MAIN P.C.B |
- |
|
Lead Free Solder |
OPERATION P.C.B |
- |
|
Lead Free Solder |
Side A |
SMT |
REFLOW |
Process |
|
Solder Dip |
|
|
Side B |
MI |
FLOW |
Process |
Among some types of lead free solder currently available, it is recommended to use one of the following types for the repair work.
•Sn + Ag + Cu (tin + silver + copper)
•Sn + Cu (tin + copper)
•Sn + Zn + Bi (tin + zinc + bismuth)
Caution:
1.As the melting point temperature of the lead free solder is about 30°C to 40°C (50°F to 70°F) higher than that of the lead solder, be sure to use a soldering iron suitable to each solder.
2.If lead solder must be used, be sure to remove lead free solder from each terminal section of the parts to be replaced and from the area around it completely before soldering, or make sure that the lead free solder and lead solder melt together fully.
2
RX-E600MK2
B, G, E models
• Finish |
|
Silver Color ........................................... |
B, G, E models |
Gold Color ................................................ |
G, E models |
E600MK2-RX
B model |
|
|
|
|
|
|
|
G, E models |
||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
B, G, E models
3