Quick Installation Guide
TE100-S5
TE100-S8
V1
Table of Contents
English |
1 |
|
1. |
Before You Start |
1 |
2. |
Hardware Installation |
2 |
3. |
LEDs |
3 |
Technical Specifications |
4 |
|
Troubleshooting |
5 |
Version 06.30.2010
1. Before You Start
Package Contents
!TE100-S5/TE100-S8
!Multi-Language Quick Installation Guide
!Power Adapter (5V DC, 800mA)
System Requirements
!Computer with a network adapter installed
!Cat.5 or Cat.5e network cable
!The power outlet should be within 1.82 meters (6 feet) of the switch
!Visually inspect the DC power jack to make sure that it is securely connected to the power adapter
!Make sure that there is proper heat dissipation and adequate ventilation around the switch
!Do not place heavy objects on the switch
1
2.Hardware Installation
1.Connect the Power Adapter to the TE100-S5/TE100-S8 and then to a power outlet.
2.Connect a Cat.5 or Cat.5e RJ-45 network cable from the computer to an available Ethernet port on the TE100-S5/TE100-S8.
2