SL86* Digital
Series
UL86* Digital
Series
UL87* Digital
Series
EUROPEAN UNION ECOLABEL
Awarded to goods or services which meet the environmental requirements of the EU ecolabelling scheme
English
Contents |
|
INSTALLING YOUR TV |
|
Safety Precautions ............................................................................. |
4 |
Installation and important information ..................................... |
5 |
The remote control ........................................................................... |
8 |
Inserting batteries and effective range ............................ |
8 |
The remote control ........................................................................... |
9 |
Inserting batteries and effective range ............................ |
9 |
CONNECTING YOUR TV |
|
Connecting external equipment ................................................ |
10 |
Connecting an HDMI® or DVI device to the HDMI input ... |
11 |
To connect an HDMI device ............................................... |
11 |
To connect a DVI device ...................................................... |
11 |
HDMI’s ARC (Audio Return Channel) feature ............... |
11 |
REGZA-LINK connection ................................................................ |
12 |
Connecting a computer ................................................................ |
13 |
To connect a PC to the RGB/PC terminal ....................... |
13 |
To connect a PC to the HDMI terminal ........................... |
13 |
Connecting a home network ...................................................... |
14 |
To connect the TV to a home network - Wired ........... |
14 |
To connect the TV to a home network with an |
|
internet connection - Wireless ...................................... |
14 |
Setting up the USB HDD (for UL86/UL87 series) .................. |
15 |
Controls and input connections ................................................. |
16 |
Switching on ............................................................................ |
16 |
Using the remote control .................................................... |
16 |
Using the TV controls and connections ......................... |
16 |
MENU structure ................................................................................ |
17 |
SETTING UP YOUR TV |
|
Startup Application ......................................................................... |
18 |
Quick Setup .............................................................................. |
18 |
Ant/Cable/Satellite (if available) ....................................... |
19 |
Satellite Settings ..................................................................... |
20 |
Auto Tuning ............................................................................. |
22 |
ATV Manual Tuning ......................................................................... |
23 |
Tuning ........................................................................................ |
23 |
Skip .............................................................................................. |
24 |
Sorting positions .................................................................... |
24 |
DTV Manual Tuning ........................................................................ |
25 |
Manual Tuning ........................................................................ |
25 |
Manual Tuning for DVB-C ................................................... |
25 |
Manual Tuning for DVB-S .................................................... |
25 |
DTV Settings ...................................................................................... |
26 |
Channels (Antenna/Cable) ................................................. |
26 |
Channels (Satellite) ................................................................ |
27 |
Standby Channel Update .................................................... |
27 |
DVB Character Set .................................................................. |
27 |
Dynamic Scan .......................................................................... |
27 |
Location setting ...................................................................... |
28 |
Analogue switch-off ............................................................ |
28 |
CONTROLS AND FEATURES |
|
General controls ............................................................................... |
29 |
Quick Menu .............................................................................. |
29 |
Selecting channels ................................................................ |
29 |
The Time Display – analogue only ................................. |
29 |
Stereo and Bilingual transmissions ................................. |
29 |
Sound controls ................................................................................. |
30 |
Volume controls and sound mute ................................... |
30 |
Dual ............................................................................................. |
30 |
Balance ...................................................................................... |
30 |
Sound Navi ............................................................................... |
30 |
Surround Settings .................................................................. |
30 |
Dolby Volume® ....................................................................... |
30 |
Dynamic Range Control ...................................................... |
31 |
Audio Level Offset ................................................................. |
31 |
Headphone Settings ............................................................. |
31 |
Audio Description ................................................................. |
31 |
Widescreen viewing ....................................................................... |
32 |
Picture controls ................................................................................ |
34 |
Picture Mode ........................................................................... |
34 |
Picture preferences ............................................................... |
34 |
Reset ........................................................................................... |
34 |
ColourMaster ........................................................................... |
34 |
Base Colour Adjustment ..................................................... |
35 |
Colour Temperature ............................................................. |
35 |
Auto Brightness Sensor Settings ...................................... |
35 |
Active Backlight Control ...................................................... |
35 |
Black/White Level .................................................................. |
36 |
Static Gamma .......................................................................... |
36 |
MPEG NR – Noise Reduction .............................................. |
36 |
DNR – Digital Noise Reduction ......................................... |
36 |
Resolution+ .............................................................................. |
36 |
Active Vision M100 ................................................................ |
36 |
Motion Detection Range ..................................................... |
36 |
Resetting the advanced picture settings ...................... |
37 |
Expert Picture Settings ........................................................ |
37 |
Control Visualization ............................................................ |
39 |
Automatic Format (Widescreen) ...................................... |
39 |
4:3 Stretch ................................................................................ |
39 |
Blue Screen .............................................................................. |
39 |
Picture Position ...................................................................... |
39 |
Picture still ................................................................................ |
40 |
HDMI Information Display .................................................. |
40 |
Using your home network ........................................................... |
41 |
Wireless LAN Information (for UL86/UL87 series) ............... |
42 |
Setting up the Network ................................................................. |
43 |
Wireless Setup ........................................................................ |
43 |
Advanced Network Setup .................................................. |
45 |
DNS Setup ................................................................................ |
46 |
Network Connection Test ................................................... |
47 |
Using the software keyboard ...................................................... |
47 |
Network Device Setup ................................................................... |
48 |
External Control Setup ......................................................... |
48 |
Media Renderer Setup ......................................................... |
48 |
Power Control Mode ............................................................ |
49 |
Device Name Setup .............................................................. |
49 |
2
Using the USB HDD Function |
|
(for UL863 and UL875 series) ................................................... |
49 |
To record DTV programmes |
|
(One Touch Recording) .................................................... |
50 |
To schedule programmed recording ............................. |
50 |
To check, edit or delete scheduling information ....... |
53 |
To view a recorded programme ....................................... |
53 |
Operations from the Library screen ................................ |
54 |
Other useful functions (Time Shift Recording) ............ |
55 |
Recording Setup ..................................................................... |
55 |
To disconnect a USB HDD ................................................... |
56 |
To confirm/delete Recording Information ................... |
57 |
Scheduling priority ................................................................ |
57 |
Camera Sensor Settings ................................................................ |
58 |
Using Toshiba Places ...................................................................... |
59 |
Using YouTube™ .............................................................................. |
59 |
Using the Function Menu ................................................... |
60 |
Using Hybrid TV Standard (if available) ................................... |
62 |
Using the Media Player .................................................................. |
62 |
Basic operation ....................................................................... |
63 |
Viewing photo files |
|
(on a DLNA CERTIFIED™ Server or USB device) ....... |
64 |
Viewing movie files |
|
(on a DLNA CERTIFIED™ Server or USB device) ....... |
66 |
Playing music files |
|
(on a DLNA CERTIFIED™ Server or USB device) ....... |
68 |
Using the Photo Frame feature .................................................. |
70 |
To open Photo Frame ........................................................... |
70 |
Setting the features ............................................................... |
70 |
Other features ................................................................................... |
72 |
Panel Lock ................................................................................. |
72 |
The timers ........................................................................................... |
72 |
Programme Timers – digital only ................................... |
72 |
On Timer .................................................................................... |
73 |
Sleep Timer .............................................................................. |
73 |
Energy Saving Settings .................................................................. |
74 |
Automatic Power Down ...................................................... |
74 |
No Signal Power Down ........................................................ |
74 |
Digital on-screen information and Programme Guide ...... |
74 |
Information .............................................................................. |
74 |
Guide .......................................................................................... |
75 |
Genre selection/searching .................................................. |
76 |
Digital settings – parental control ............................................ |
76 |
Parental PIN Setup ................................................................. |
76 |
Parental Setup ......................................................................... |
77 |
Network Lock .......................................................................... |
77 |
Digital settings – Channel Options .......................................... |
77 |
Selecting favourite channels ............................................. |
77 |
Favourite Channel Lists ....................................................... |
77 |
Skip channels ........................................................................... |
78 |
Locking channels ................................................................... |
78 |
Digital settings – other settings ................................................ |
78 |
Subtitles ..................................................................................... |
78 |
Audio languages .................................................................... |
78 |
Common Interface ................................................................ |
79 |
Software Upgrade and Licences ................................................ |
79 |
Auto Upgrade ......................................................................... |
79 |
Searching for New Software .............................................. |
79 |
Network Upgrade .................................................................. |
80 |
Software Licences .................................................................. |
80 |
System Information and Reset TV ............................................. |
80 |
System Information .............................................................. |
80 |
Reset TV ..................................................................................... |
80 |
PC Settings ......................................................................................... |
81 |
Horizontal and Vertical Position ....................................... |
81 |
Clock Phase .............................................................................. |
81 |
Sampling Clock ....................................................................... |
81 |
Reset ........................................................................................... |
81 |
Input selection and AV connections ........................................ |
82 |
Input selection ........................................................................ |
82 |
External input skip ................................................................. |
82 |
Labeling video input sources ............................................ |
83 |
PC Audio ................................................................................... |
83 |
HDMI 3 Audio .......................................................................... |
83 |
HDMI Settings ......................................................................... |
84 |
Digital Audio Output ............................................................ |
84 |
Using Personal TV Mode ............................................................... |
85 |
Using REGZA-LINK ........................................................................... |
87 |
Enable REGZA-LINK ............................................................... |
87 |
TV Auto Power ........................................................................ |
87 |
Auto Standby .......................................................................... |
87 |
Amplifier Control ................................................................... |
87 |
Initial Speaker Setting .......................................................... |
87 |
Position Key Pass Through ................................................. |
87 |
REGZA-LINK input source selection ................................ |
88 |
REGZA-LINK Device Control ............................................... |
88 |
REGZA-LINK one touch play .............................................. |
88 |
REGZA-LINK system standby ............................................. |
88 |
REGZA-LINK system audio control .................................. |
89 |
Toshiba PC compatible with REGZA-LINK .................... |
89 |
TEXT SERVICES |
|
Text services ...................................................................................... |
90 |
Selecting modes .................................................................... |
90 |
Text information .................................................................... |
90 |
Navigating pages using Auto ............................................ |
90 |
Navigating pages using LIST ............................................. |
90 |
Control buttons ...................................................................... |
91 |
PROBLEM SOLVING |
|
Questions and Answers ............................................................... |
92 |
INFORMATION |
|
License Information ........................................................................ |
95 |
Information ........................................................................................ |
97 |
Specifications and accessories ................................................ |
100 |
English
3
English
This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products, and some points may not apply to the goods you have just purchased.
Air Circulation
Leave more than 10cm clearance around the television to allow adequate ventilation. This will prevent overheating and possible damage to the television. Dusty places should also be avoided.
Heat Damage
Damage may occur if the television is left in direct sunlight or near a heater. Avoid places subject to extremely high temperatures or humidity. Place in a location where the temperature remains between 5°C (41°F) min. and 35°C (94°F) max.
Mains Supply
The mains supply required for this equipment is 220240v AC 50/60Hz. Never connect to a DC supply or any other power source. DO ensure that the television is not standing on the mains lead. Use only the supplied lead.
DO NOT cut off the mains plug from this equipment, this incorporates a special Radio Interference Filter, the removal of which will impair its performance.
IF IN DOUBT, PLEASE CONSULT A COMPETENT ELECTRICIAN.
DO be careful with glass panels or doors on equipment.
DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND ‘LIVE’ PARTS.
THE MAINS PLUG IS USED AS A DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE.
Do not
DO NOT obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.
DO NOT allow electrical equipment to be exposed to dripping or splashing or objects filled with liquids, such as vases, to be placed on the equipment.
DO NOT place hot objects or naked flame sources, such as lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to fires.
WARNING: To prevent the spread of fire, keep candles or other open flames away from this product at all times.
DO NOT use makeshift stands and NEVER fix legs with wood screws. To ensure complete safety, always fit the manufacturer’s approved stand, bracket or legs with the fixings provided according to the instructions.
DO NOT leave equipment switched on when it is unattended, unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off by withdrawing the plug, and make sure your family knows how to do this. Special arrangements may need to be made for people with disabilities.
Do
DO read the operating instructions before you attempt to use the equipment.
DO ensure that all electrical connections (including the mains plug, extension leads and interconnections between pieces of equipment) are properly made and in accordance with the manufacturers’ instructions. Switch off and withdraw the mains plug before making or changing connections.
DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.
WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. See page 5.
DO NOT continue to operate the equipment if you are in any doubt about it working normally, or it is damaged in any way – switch off, withdraw the mains plug and consult your dealer.
WARNING: Eexcessive sound pressure from earphones or headphones can cause hearing loss.
ABOVE ALL: NEVER let anyone, especially children, push or hit the screen, or push anything into holes, slots or any other openings in the case.
NEVER guess or take chances with electrical equipment of any kind – it is better to be safe than sorry.
4
INSTALLING YOUR TV
Where to install
Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen.
Place the TV on a stable, level surface that can support the weight of the TV. In order to prevent injury and maintain stability of this apparatus, secure the TV to the level surface using the strap if fitted, or to a wall using a sturdy tie to the P clips provided. Otherwise secure the TV on the level surface using the supplied mounting screw.
Fixing strap
Fixing strap
Sturdy tie (as short as possible)
The LCD display panels are manufactured using an extremely high level of precision technology; however, sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not a sign of a malfunction.
Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break or damage the screen. Also, please be certain that small items cannot be inserted into slots or openings in the case.
When using a Wall Bracket
Stand clip
‘P’ Clip
Screw
(supplied)
Stand style is dependent on model
Please use a wall bracket appropriate for the size and weight of the LCD TV.
•Two people are required for installation.
•Never use the four screws attached to the TV.
a Unplug and remove any cables and/or other component connectors from the rear of the TV.
b Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket.
c Follow the instructions provided with your wall bracket.
Before proceeding, make sure the appropriate bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket.
d Always use the screws supplied or recommended by the wall mount manufacturer.
Remove four screws.
(Do not reuse these screws for attaching a wall bracket.)
English
5
English
INSTALLING YOUR TV
Please take note
The digital reception function of this television is only effective in the countries listed in the “Country” section of the “Setup/System Setup” menu. Depending on country/area, some of this television’s functions may not be available. Reception of future additional or modified services can not be guaranteed with this television.
If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays, video games, on-screen menus, etc. are left on the television screen for any length of time, they could become conspicuous. It is always advisable to reduce both the brightness and contrast settings.
Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3 outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of other size modes (e.g.: Super Live) will prevent permanent retention.
EXCLUSION CLAUSE
Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by:
i)Fire;
ii)Earthquake;
iii)Accidental damage;
iv)Intentional misuse of the product;
v)Use of the product in improper conditions;
vi)Loss and/or damage caused to the product whilst in the possession of a third party;
vii)Any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the owner’s manual;
viii)Any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with associated equipment;
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product.
When Using a USB HDD (for UL86/UL87 series)
•The recording function has been designed for private use and entertainment in your home environment. Please note that any commercial use of the recording function could lead to copyright infringement of authors’ rights. Toshiba asks you to respect the intellectual property rights of third parties.
•Before recording to a device connected to the TV, make a test recording and check the recording performance.
•Programmes that are prohibited from copying due to copyright protection cannot be recorded.
•Toshiba shall not be liable for compensation or incidental damages of any kind whatsoever resulting from content that was not properly recorded on the recording device or that was modified or lost.
•Toshiba shall not be liable for damages of any kind whatsoever (breakdown of the recording device, modification or loss of the recorded content, etc.) resulting from malfunction, operating failure or incorrect operation due to combining with another connected device.
•If you connect and register a USB HDD that has been used with a PC or another TV, all the data and recorded programmes stored on the disk will be deleted.
•To use a USB HDD that has been used with this TV on a PC, the hard disk must first be formatted with the PC. At this time, all the data stored using the TV will be deleted.
•Do not turn off the power supply to the USB HDD or disconnect the connecting cable while the USB HDD is operating.
Doing so may result in loss of the recorded data or malfunction of the USB HDD.
•If you connect a USB bus-powered device to the USB 1 port, it may interfere with recording on the USB HDD.
•The recording function is not available in all countries.
•Please note that recording on the USB HDD is no longer playable after the TV’s main-board is exchanged during service.
6
INSTALLING YOUR TV
About the Camera Sensor (for UL86/UL87 Series)
The camera sensor installed in this TV can detect a person’s face or movement and identify individuals by their registered faces. Please note that certain factors can affect the performance of the sensor function as set out below.
General Sensor Function
•For the sensor to operate (for each function) you will need to be within the sensor detection range as set out below.
•The approximate effective detection range of the camera sensor is as shown below. (Note: The distance and angle of the detection range are based on a standard viewing environment and conditions).
– Horizontal angle: approx. 58° (approx. 29° × 2)
Personal Identification
29° 29° (50 ~ 400cm)
Face Detection (50 ~ 500cm)
–Vertical angle: approx. 34° (upward approx. 27°, downward approx. 7°)
27°
7°
Personal Identification (50 ~ 400cm)
Face Detection (50 ~ 500cm)
–Distance: approx. 50 cm to 500 cm (Personal Identification Function: approx. 50 cm to 400 cm)
•Do not place anything in front of the TV that may obstruct detection or reduce the sensor detection range.
Motion Detection Function
•Motion detection may be affected by the surrounding environment, such as the brightness of the room. In addition, very slight, small or momentary movement may be undetected.
•Sensor performance can be enhanced by making sure the room is brightly lit and using prolonged and obvious movements.
•Billowing curtains, a pet or variations in illumination in the detection range may be detected as motion, even if there is no person there.
•You can use the camera sensor confirmation menu to check that no movement made by other persons is being detected.
Face Detection Function
•The sensor can detect up to eight persons.
•Face Detection may be affected if:
–Your face is obstructed or partially hidden, for example, by your hair, a mask or a hat,
–Your head is tilted or turned to one side, or
–You are wearing dark glasses or the light is reflected in your glasses.
•You can use the camera sensor confirmation menu to check whether your face is detected.
•The camera sensor may detect background images such as a picture portrait or the pattern on the wall as eyes or nose even if there is no person there. You can use the confirmation screen to check whether any such object in the detection range is being incorrectly detected as a face.
•Face Detection can be less effective on darker complexions and in darker environments.
•Face Detection can be enhanced by making sure your face is clearly visible and evenly lit. If the room is dark, Face Detection can be enhanced by making sure the room is brightly lit. If the lighting environment creates a shadow on your face, Face Detection can be enhanced by adjusting the lighting to prevent shadows.
Personal Identification Function
•The Personal Identification Function is part of the Face Detection Function. The factors affecting the Face Detection Function set out above also apply to the Personal Identification Function.
•Personal Identification may in addition be affected by:
–A different shadow pattern from that when your face was registered. Personal Identification accuracy can be enhanced by registering additional facial images under different conditions.
–A different lighting environment from when your face was registered, such as during the day and at night. Personal Identification accuracy can be enhanced by registering your face under various lighting environments.
–Whether or not you are wearing glasses. If you wear glasses, we recommend that you register your face both with and without glasses.
–A different facial expression. Personal Identification accuracy can be enhanced by registering different facial expressions.
•Personal Identification may be affected when faces have similar characteristics (e.g. brothers, sisters, twins).
•Personal Identification is less effective on the faces of young children.
Face Registration Function
•Up to four people can be registered under the Personal Identification Function. The same person cannot be registered twice.
•A maximum of 10 different facial images per person can be registered. Personal identification accuracy can be enhanced by registering different facial images as set out above.
•It is advisable to register your face in your usual viewing position and with your natural facial expression. Registering your face too near to or too far from the screen may hinder identification performance.
English
7
English
INSTALLING YOUR TV
The remote control |
|
16 |
To access “TOSHIBA PLACES” Top Page |
||||
|
|
When network is not connected, an error message will be |
|||||
|
|
|
|||||
CT-90369 (for SL86 series) |
|
|
displayed. |
|
|
||
|
17 |
To access Media Player Menu |
|
||||
1 |
|
|
|||||
3 |
18 |
To call up text services |
|
|
|||
2 |
|
|
|||||
19 |
To access the analogue or digital Channel List |
||||||
5 |
6 |
||||||
20 |
On-screen Menus |
|
|
||||
4 |
7 |
21 |
To display the digital on-screen Programme Guide |
||||
|
|
||||||
8 |
|
22 |
|
To page up, down, left or right |
|||
|
23 When using menus, the arrows move the cursor on the screen |
||||||
|
|
||||||
|
10 |
|
up, down, left or right. Press OK to confirm your selection |
||||
9 |
24 |
To return to previous Menu |
|
|
|||
12 |
|
|
|||||
|
25 |
To exit menus |
|
|
|||
11 |
13 |
|
|
||||
26 |
When in TV mode: |
When in Text mode: |
|||||
15 |
|||||||
|
|
r |
Picture still |
A |
To reveal concealed |
||
|
14 |
|
|||||
16 |
|
|
text |
||||
19 |
|
DAnalogue time |
B |
To hold a wanted |
|||
17 |
18 |
|
|
display |
|
page |
|
20 |
|
|
|
C |
|||
21 |
|
|
|
To enlarge text |
|||
22 |
|
|
|
||||
23 |
|
|
|
|
display size |
||
24 |
|
|
|
DTo select a page |
|||
25 |
|
|
|
|
while viewing a |
||
|
|
|
|
|
|
normal picture |
|
|
26 |
|
When using Programme |
During Playback: |
|||
|
|
|
Guide: |
c |
To PLAY |
||
|
27 |
|
Z |
–24 hours |
v |
To STOP |
|
|
|
z |
+24 hours |
W/w To PAUSE/STEP |
|||
|
|
|
CC |
–1 page |
Z |
To SKIP-BACK |
|
|
|
|
cc |
+1 page |
CC |
To REWIND |
|
|
|
|
|
|
cc |
To FAST FORWARD |
|
|
|
|
|
|
z |
To SKIP-FORWARD |
|
|
|
27 |
Colour buttons: Text and interactive service control buttons |
1For On/Standby mode
2To select external input sources
3To select TV Mode
4Selectable Picture preferences
5Widescreen viewing
6 sStereo/bilingual transmissions
7Digital Subtitles or Analogue TEXT Subtitle pages if available
8Number buttons
9Switch the Audio Description On/Off
10To return to previous programme position
11To alter the TV volume
12To display on-screen information
To access the index page in Text mode
13To mute the TV sound
14To access Quick Menu
15To change programme positions To change TEXT pages
Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the proper way. Suitable battery types for this remote are AA, IEC R6 1.5V.
Do not combine a used, old battery with a new one or mix
battery types. Remove dead batteries immediately to prevent acid from leaking into the battery compartment. Dispose of them in accordance with instructions on page 96 of this manual.
Warning: Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the television. If the operating range becomes reduced, the batteries may need replacing.
8
|
|
INSTALLING YOUR TV |
The remote control |
16 |
To exit menus |
|
||
|
17 |
Colour buttons: Text and interactive service control |
CT-90382 (for UL86/UL87 series)
1 |
|
|
2 |
3 |
|
4 |
6 |
|
5 |
8 |
|
7 |
10 |
|
|
9 |
|
11 |
12 |
|
13 |
14 |
|
|
||
15 |
16 |
|
17 |
|
|
18 |
|
|
19 |
20 |
|
21 |
|
|
22 |
23 |
|
24 |
25 |
|
26 |
28 |
|
27 |
30 |
|
29 |
||
|
1For On/Standby mode
2To select external input sources
3To select TV Mode
4To access Quick Menu
5To access the “TOSHIBA PLACES” Top Page
When network is not connected, an error message will be displayed.
6To access the analogue or digital Channel List
7To alter the TV volume
8Switch the Audio Description On/Off
9To mute the TV sound
10To change programme positions To change TEXT pages
11On-screen Menus
12To display the digital on-screen Programme Guide
13When using menus, the arrows move the cursor on the screen up, down, left or right
14Press OK to confirm your selection
15To return to previous Menu
buttons
18Number buttons
19To display on-screen information
To access the index page in Text mode
20To return to previous programme position
21 When in TV mode: |
When in Text mode: |
||
DAnalogue time |
A |
To reveal concealed |
|
|
display |
B |
text |
|
|
To hold a wanted |
|
|
|
C |
page |
|
|
To enlarge text |
|
|
|
|
display size |
|
|
DTo select a page |
|
|
|
|
while viewing a |
|
|
|
normal picture |
When using Programme |
During Playback: |
||
Guide: |
c |
To PLAY |
|
Z |
–24 hours |
v |
To STOP |
z |
+24 hours |
W/w To PAUSE/STEP |
|
CC |
–1 page |
Z |
To SKIP-BACK |
cc |
+1 page |
CC |
To REWIND |
|
|
cc |
To FAST FORWARD |
|
|
z |
To SKIP-FORWARD |
22To record DTV programmes
23To call up text services
24Picture still
25To access Media Player Menu
26Selectable Picture preferences
27Widescreen viewing
28sStereo/bilingual transmissions
29To access More Information Menu
30Digital Subtitles or Analogue TEXT Subtitle pages if available
Inserting batteries and effective range
Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the proper way. Suitable battery types for this remote are AAA, IEC R03 1.5V.
Do not combine a used, old battery with a new one or mix
battery types. Remove dead batteries immediately to
prevent acid from leaking into the battery compartment. Dispose of them in accordance with instructions on page 96 of this manual.
Warning: Batteries must not be exposed to excessive heat such as sunshine, fire or the like.
The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the television. If the operating range becomes reduced, the batteries may need replacing.
English
9
English
Before connecting any external equipment, turn off all main power switches. If there is no switch, remove the mains plug from the wall socket.
ILLUSTRATION SHOWS 42UL863. |
|
|
|
HDMI 4 INPUT |
|
|
VIDEO/AUDIO INPUT |
|
|
(EXT 3) |
|
|
HEADPHONE jack |
|
Power cord |
|
|
|
HDMI 1/2/3 INPUTS |
|
SCART (EXT 1) |
COMPONENT VIDEO/AUDIO |
|
INPUT (EXT 2) |
||
LAN port |
||
|
||
|
PC/HDMI 3 AUDIO INPUT |
|
DIGITAL AUDIO OUT PUT |
(shared) |
|
|
||
(OPTICAL) |
|
|
|
RGB/PC INPUT |
Aerial Cable
Media Recorder |
Satellite dish |
Aerial cables:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the aerial to the socket on the rear of the television. If you use a decoder and/or a media recorder, it is essential that the aerial cable is connected through the decoder and/or through the media recorder to the television.
“F-type”
Satellite cable: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the LNB from the satellite dish to the SATELLITE ANTENNA socket on the TV. You can receive TV, radio, interactive TV, and HD TV with clear reception.
SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the media recorder IN/OUT socket to the television. Connect the decoder TV socket to the television.
Before running Auto Tuning, put your decoder and media recorder to Standby.
The phono sockets alongside the COMPONENT VIDEO INPUT sockets will accept L and R audio signals.
The Digital Audio Output socket enables the connection of a suitable surround sound system.
NOTE: This output is always active.
HDMI® (High-Definition Multimedia Interface) is for use with a DVD decoder or electrical equipment with digital audio and video output. For acceptable video or PC signal formats through the HDMI terminals, see page 98.
NOTE: Although this television is able to connect to HDMI equipment, it is possible that some equipment may not operate correctly.
LAN port is used to connect the TV to your home network. This TV can play digital content stored on a DLNA CERTIFIED™ product with server function.
A wide variety of external equipment can be connected to the back of the television; therefore, the relevant owner’s manuals for all additional equipment must be referred to for exact instructions.
If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button. To recall external equipment, press oto select between DTV, EXT 1, EXT 2,
EXT 3, HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC or ATV.
When the external input mode is selected while viewing DTV mode, the SCART socket does not output video/audio signals.
10
CONNECTING YOUR TV
The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device or uncompressed digital video from a DVI (Digital Visual Interface) source device.
This input is designed to accept HDCP (High-Bandwidth Digital-Content Protection) programme material in digital form from EIA/CEA-861-D–compliant consumer electronic devices (such as a set-top box or DVD player with HDMI or DVI output). For acceptable video signal formats, see page 98.
NOTE:
•Some early HDMI equipment may not work properly with your latest HDMI TV, due to the adoption of a new standard. Please unplug your HDMI cable first and then try setting the
INSTAPORT™ and Enable Content Type options to “Off”. Your early HDMI source should operate properly with your television. See page 84.
•Supported Audio format: Linear PCM, Dolby Digital (AC-3), sampling rate 32/44.1/48kHz.
Connect an HDMI cable (type A connector) to the HDMI terminal.
For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo ( ).
•If your HDMI connection is capable of 1080p and/or your television is capable of refresh rates greater than 50Hz, you will need a Category 2 cable. Conventional HDMI/DVI cable may not work properly with this model.
•HDMI cable transfers both video and audio. Separate analogue audio cables are not required (see illustration).
•See “HDMI 3 Audio” section on page 83.
Connect an HDMI-to-DVI adaptor cable (HDMI type A connector) to the HDMI 3 terminal and audio cables to the PC/ HDMI 3 (AUDIO) socket (see illustration).
•The recommended HDMI-to-DVI adaptor cable length is 6.6 ft (2m).
•An HDMI-to-DVI adaptor cable transfers video only. Separate analogue audio cables are required.
•See “HDMI 3 Audio” section on page 83.
the back of your television
Audio cable for HDMI to television connection (not supplied)
HDMI-to- DVI adaptor Cable
DVI device
NOTE:
To ensure that the HDMI or DVI device is reset properly, it is recommended that you follow these procedures:
•When turning on your electronic components, turn on the television first, and then the HDMI or DVI device.
•When turning off your electronic components, turn off the HDMI or DVI device first, and then the television.
the back of your television
HDMI cable
HDMI’s ARC (Audio Return Channel)
feature
This feature enables the audio signal of the TV to be sent to the AV amplifier via the HDMI cable. It will not be necessary to connect a cable from the audio output of the TV to the audio input of the AV amplifier to reproduce the audio received from the tuner of the TV through the AV amplifier.
the back of your television
AV amplifier that supports ARC
HDMI device
English
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To view the HDMI device video, press the obutton to select |
|
HDMI cable |
|||||||
HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode. |
|
|
11
English
CONNECTING YOUR TV
You can control the basic functions of connected audio/video devices using the television’s remote control if you connect a REGZA-LINK compatible AV amplifier or playback device. For an explanation of setup and operations, see pages 87–89.
the back of your television
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AV amplifier |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Playback device |
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Playback device
For the setup shown above, you will need three HDMI cables.
NOTE:
•If several devices are connected, the REGZA-LINK feature may not operate properly.
•For proper operation, it is recommended that you use HDMI cables with the HDMI Logo ( ).
•This function is available when one PC and one AV amplifier are connected separately. However, it may not operate properly if the PC is connected via the AV amplifier.
Before controlling the device(s):
•After completing the above connections, set the REGZALINK Setup menu as you desire (see page 87).
•The connected devices must also be set. For details, see the operation manual for each device.
•The REGZA-LINK feature uses CEC technology as regulated by the HDMI standard.
•This feature is limited to models incorporating Toshiba’s REGZA-LINK. However, Toshiba is not liable for those operations. Refer to individual instruction manuals for compatibility information.
12
|
CONNECTING YOUR TV |
|
Connecting a computer |
|
|
To connect a PC to the HDMI terminal |
With either an RGB/PC or an HDMI connection, you can watch your computer’s display on the television and hear the sound from the television’s speakers.
When connecting a PC to the RGB/PC terminal on the television, use an analogue RGB (15-pin) computer cable and a PC audio cable for the PC/HDMI 3 (AUDIO) socket. Select PC from the PC/HDMI 3 Audio options in the AV Connection menu located in the Preferences menu.
the back of your television
Mini D-sub
15 pin connector
When connecting a PC to the HDMI terminal on the television, use an HDMI-to-DVI adaptor cable and an analogue audio cable.
If connecting a PC with an HDMI terminal, use an HDMI cable (type A connector). A separate analogue cable is not necessary.
the back of your television
Audio cable for PC to television connection (not supplied)
Computer
Computer
English
Audio cable for PC to television connection (not supplied)
RGB PC cable (not supplied)
Conversion adaptor if required
(not supplied)
To use a PC, set the monitor output resolution on the PC before connecting it to the television. For acceptable PC signal formats, see page 97.
To display the optimum picture, use the PC setting feature (see page 81).
NOTE:
•The PC audio input terminal on the television is shared with the HDMI 3 analogue audio input terminal (see page 83).
•Some PC models cannot be connected to this television.
•An adaptor is not needed for computers with a compatible mini D-sub15-pin terminal.
•Depending on the DVD’s title and the specifications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during multi-angle scenes.
•A band may appear at the edges of the screen or parts of the picture may be obscured. This is due to scaling of the picture by the set, it is not a malfunction.
•When PC input mode is selected, some of the television’s features will be unavailable e.g. Colour System in the
Setup/System Setup menu.
•Some PC models may output unique signals that the television may be unable to detect (see page 97).
HDMI-to-DVI adaptor cable
For acceptable PC and video signal formats, see page 98.
NOTE:
•The edges of the images may be hidden.
•If connecting a certain PC model with a unique PC signal, the PC signal may not be detected correctly.
13
English
CONNECTING YOUR TV
The LAN port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to access photo, video and audio files that are stored on a DLNA CERTIFIED™ server and play/display them on your TV.
NOTE:
•If you connect to a shared network outside your home, it is advisable to use a router. Always use DLNA CERTIFIED™ products in private network environments.
•If you use a hub or switch to connect the TV to your home network, you may not be able to use the automatic setup and will have to manually set up the network address. See page 46.
•If you use a router with built-in DHCP functionality, use the automatic setup. Manual setup may not work.
•If you connect the TV and PC directly, use a crossover LAN cable.
Please refer to “Wireless Setup” section on page 43.
the back of your television
TOSHIBA Dual Band WLAN adaptor
(for SL86 series)
Access point (AP)
Wireless LAN router
Modem
the back of your television |
Computer |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: UL86 and UL87 have a built in WLAN Module. |
Modem (if available) |
|
|
|
Router with Hub |
|
|
||||||||||||||||||||||
|
|
|
|
|
||||||||||||||||||||||||
|
|
|
|
|
||||||||||||||||||||||||
|
|
|
|
|
|
|||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[1] [2]
[2] [3]
Server PC
Cable or Phone jack
[2]
[1]Coaxial or telephone cable (depending on your modem type)
[2]Standard LAN cable
[3]Do NOT connect a phone jack directly to the TV’s LAN port.
14
CONNECTING YOUR TV
To connect an USB HDD (not supplied)
USB HDD
To USB2
USB cable (not supplied)
NOTE: For available USB HDD information, see "Product Information" on the website.
To register an USB HDD
When you connect a new USB HDD to the USB 2 port on the TV, the following screen will appear.
An unregistered USB HDD has been detected.
Register the USB HDD?
Yes
a Press Cor cto select Yes and press OK.
The formatting confirmation window will appear.
b Press Cor cto select Yes and press OK.
Registration will start.
c If you want to name the USB HDD, press Cor cto select Yes and press OK.
See page 47 to input characters.
The maximum number of characters is 10.
If you prefer the default name ”USB HDD X,” select No and press OK.
d The Device List will appear.
|
Device List |
|
|
|
Connected |
|
|
Device Name |
Registered |
||||
|
USB HDD 1 |
|
|
|
|
|
|
USB HDD 2 |
|
|
|
|
|
|
USB HDD 3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
While in the list mode, the following key operations
are available: |
|
OK button................. |
To register/remove |
RED button .............. |
To disconnect |
GREEN button ........ |
To change Device Name |
YELLOW button..... |
To test |
BLUE button............ |
To format |
NOTE:
•To disconnect a USB HDD from the TV, follow the procedures for “To disconnect a USB HDD” section (page 56).
•When using a USB HDD, if necessary, perform the settings and operations shown in “Using the USB HDD Function” section (page 49).
•Connect the USB HDD to the USB 2 port.
Recording and playback cannot be performed if connected to the USB 1 port.
•Up to 8 USB HDDs can be registered to this TV.
•Recorded programmes saved on the USB HDD can only be viewed on this TV. They cannot be viewed when connected to another TV (including the same model of TV), a PC, or other device.
•If a USB HDD is re-registered, it will not be formatted.
•When the USB HDD is formatted, all the data stored on the HDD will be deleted.
You can now use registered USB HDDs.
English
15
English
CONNECTING YOUR TV
A wide variety of external equipment can be connected to the input sockets on the side of the television.
While all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.
USB 1 port
Media Player
COMMON INTERFACE The Common Interface is for a Conditional Access
Module (CAM). Contact a service provider.
The software updating of CI Plus CAM may be automatically executed. At this time, your Recording/Reminder programming will be canceled.
USB 2 port Media Player/
WLAN adaptor ready for a home network (SL86 series) WLAN Module built-in (UL86/UL87 series)
USB HDD connection ready (UL86/UL87 series)
If the RED LED is not lit, check that the mains plug is connected to the power supply and press 1on the remote control; it may take a few moments. The GREEN LED will be lit.
To put the television into Standby, press 1on the remote control. To view the television, press 1again. The picture may take a few seconds to appear.
For energy saving:
We recommend that you use the television with the factory settings. The factory settings are for energy saving. Unplugging the mains plug will cut energy use to zero for all televisions. This is recommended when the television is not being used for a long time, e.g. when on holiday. Reducing the brightness of the screen will reduce energy use. Energy efficiency cuts energy consumption and thus saves money by reducing electricity bills.
NOTE: Putting the television into standby mode will reduce energy consumption, but will still draw some power.
Press MENU on the remote control to display the menu.
The five initial topics icons will appear. As each symbol is selected by pressing Cor con the remote control. Press BbCcto enter a sub menu and then enter a further sub menu to see any options.
NOTE: The same menu is displayed in DTV (Digital TV) and ATV (Analogue TV) modes; however, where some items are not available in a mode, they will appear grayed out.
ILLUSTRATION SHOWS 42UL863.
Camera Sensor
Ambient
Light Sensor
Control panel (touch sensor)
ORANGE LED – Programme timer set (digital only)
RED LED – Programme timer Active (digital only)
RED LED – Standby
GREEN LED – Power on
To use the option, press Band bon the remote control to move up and down and press Cor cto select your desired setting. Follow the on-screen instructions. The functions of each menu are described in detail throughout the manual.
To alter the volume gently touch – 2+.
To alter the programme position touch bpB.
Touch MENU and bpB, – 2+ to control the sound and picture options.
Touch MENU to finish.
To select an external input, touch ountil the appropriate input source is selected.
The Media Player feature provides access to photo, movie and music files stored on a USB storage device that is connected via the USB 1 or USB 2 port or on a network device.
NOTE: The USB socket has limited functionality and Toshiba can take no responsibility for damage to other connected equipment.
For SL86 series, the USB 2 socket has to be used with the “TOSHIBA Dual Band WLAN Adaptor WLM-10U2” in order to access a wireless network.
This feature is available only when the “TOSHIBA Dual Band WLAN Adaptor“ is used.
Please always refer to the owner’s manual of the equipment to be connected for full details.
NOTE: Interactive video games that involve shooting a “gun” at an on-screen target may not work with this TV.
16
CONNECTING YOUR TV
To open the main menu (illustration below) , press MENU on the remote control or on the TV control panel.
English
|
|
|
|
Genre Search |
Programme |
Library |
|
|
|
|
|
|
|
|
Guide |
Timers |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Setup |
TV Programmes Media Player |
Connected TV |
|
|
||
|
|
|
Function |
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
1st Layer |
|
|
|
2nd Layer |
|
|
|
|
3rd Layer |
|
Press MENU. |
Press Cc/ B. Press Cc. |
|
Press OK. |
Press BbCc. |
||||||
|
|
|
|
|
|
|
|
|
|
|
TV Programmes |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Guide |
|
|
|
|
Jump to Programme Guide (EPG) |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|||
|
|
|
|
Genre Search |
|
|
|
|
Jump to Genre Search |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
Programme Timers |
|
|
|
Jump to Programme Timers |
||
|
|
|
|
|
|
|
||||
|
|
|
|
Library |
|
|
|
|
Jump to Library (for UL86/UL87 only) |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
Media Player |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Photo |
|
|
|
|
Device Select or Photo Viewer |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|||
|
|
|
|
Movie |
|
|
|
|
Device Select or Movie Viewer |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
Music |
|
|
|
|
Device Select or Music Viewer |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
Media Player Setup |
|
|
|
Media Player Setup Menu |
||
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
Connected TV |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Toshiba Places |
|
|
|
|
Jump to Toshiba Places |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|||
|
|
|
|
YouTube |
|
|
|
|
Jump to YouTube |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
Function |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Photo Frame |
|
|
|
|
Jump to Photo Frame |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|||
|
|
|
|
On Timer |
|
|
|
|
On Timer Menu |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
Sleep Timer |
|
|
|
|
Sleep Timer Menu |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
Setup |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Picture |
|
|
|
|
Picture Menu |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
Sound |
|
|
|
|
Sound Menu |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
Preferences |
|
|
|
|
Preferences Menu |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
System Setup |
|
|
|
|
System Setup Menu |
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
17
English
Startup Application |
h Press OK, and the AutoView screen will appear, press |
|||
Before switching on the television, set your |
|
Cor cto select Yes or No. |
||
|
|
|
|
|
decoder and media recorder, if applicable, to |
|
AutoView |
||
Standby. To set up the television, use the buttons |
|
AutoView mode automatically adjusts picture settings |
||
on the remote control as detailed on page 8, 9. |
|
to suit ambient light conditions. |
||
|
Do you wish to enable AutoView mode? |
|||
|
|
|
No |
|
|
|
|
|
|
a Press the 1button. The Menu Language screen will appear. This screen will appear the first time that the television is switched on and each time Reset TV is selected.
b Press BbCcto select the menu language and press OK.
c Highlight Country and press C or cto select. The television is now set to tune the stations for your country.
Quick Setup |
|
|
||
|
Country |
|
Germany |
|
|
Primary Subtitle Language |
|
English |
|
|
Secondary Subtitle Language |
|
German |
|
|
Primary Audio Language |
|
English |
|
|
Secondary Audio Language |
|
English |
|
|
|
|
|
|
NOTE:
•The following display menus will differ slightly according to the country you selected.
•If there is not a country that you want to select in the list, select Others.
d Press OK, and the Location screen will appear.
Location
To use the TV for displaying in a store showroom, please select [Store]. [Home] mode is recommended for normal use.
Home
e Press Cor cto select Home or Store. For normal home use, select Home.
f Press OK.
USB Port Setup screen will appear depending on country/area.
g Press OK, and the TV Mounting screen will appear, press Cor cto select Stand or Wall.
TV Mounting
If you are mounting the TV on a wall please select [Wall]. [Stand] is recommended for other uses.
This setting may be modified later under Sound Navi in the Sound menu.
Stand
i Press OK. If the Ant/Cable/Satellite screen appears, press Bor bto select Antenna, Cable or Satellite and press OK to check ( ).
Ant/Cable/Satellite
Antenna
Cable
Satellite
Next
If DVB-C is not supported in your area, Cable will not be displayed.
•When you select Antenna or Cable, follow steps 10 to 13.
•When you select Satellite, skip to step 14.
•When you select Antenna (or Cable) and Satellite, the Satellite Settings startup screen will appear automatically after completing the Antenna (or Cable) scan and pressing OK.
j Select Next and press OK. The Auto Tuning start up screen will appear with the option to select between DTV and ATV, DTV or ATV if available. Use Cor cto select the appropriate mode.
k Press Bor bto highlight Start Scan and press OK.
The television will start to search for available DTV and/or ATV channels. The progress bar will indicate the scan status.
You must allow the television to complete the search.
Auto Tuning |
|
|
|
|||
|
Progress |
|
Found |
|||
DTV Tune |
3% |
|
|
|
2 |
|
ATV Tune |
|
|
|
Waiting... |
|
|
|
|
|
|
Channel: C7 |
|
|
|
|
|
|
|
|
|
When the search is complete, the television will automatically select position one.
The Auto Tuning screen will display the total number of services found.
NOTE: If there are multiple channels with the same channel number, a confirmation window will appear. Press Cor cto select the one you prefer.
18
|
SETTING UP YOUR TV |
|
l Press Cor cto view the DTV (digital channel) or ATV |
Press Bor bto highlight Store Position and press |
|
(analogue channel) lists. |
OK to store the dish position. Repeat steps 14 and 15 |
|
for the next satellite as necessary. |
||
|
m Press Bor bto move through the list to select a channel and press OK to view.
In ATV mode, some areas may receive duplicate stations. There may not be a clear picture or the signal may be weak, so the station order can be changed using ATV Manual Tuning.
REMEMBER: Press TV at any time to select between ATV and DTV (DTV Ant TV/Radio/Text, DTV Cable TV/ Radio/Text, DTV Sat TV/Radio/Text if available) modes.
NOTE: The time will be set automatically by transmission but can be advanced or decreased by using Local Time Setting in the DTV Settings screen.
n Select Next and press OK. The Satellite Settings screen will appear. From this window, you can add the satellites that you wish to tune and configure detailed settings for each one individually. See “Satellite Settings” on page 20.
Satellite Settings
Switch Type |
|
|
None |
|||||
|
|
|
|
|
||||
LNB Power |
|
|
|
On |
||||
No. |
Satellite |
|
Dish |
|
|
LNB |
||
1 |
|
|
ASTRA 19.2˚E |
|
1 |
|
|
1 |
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 |
|
|
|
|
|
|
|
|
Transponder : 1/83 (10743 MHz)
Dish Type : Fixed
Lower LOF (MHz) : 9600
Upper LOF (MHz) : 10600
If your satellite dish is not movable, the Positioning screen will not appear.
Adjust the dish position manually for the maximum Signal Level strength.
Highlight Done and press OK.
p If the reception testing completes successfully, the Auto Tuning startup screen will display.
Auto Tuning - Satellite
|
Start Scan |
|
|
|
|
|
|
Satellite |
|
ASTRA(19.2°E) |
|
|
|
|
|
Scan Option |
|
Free to Air |
You can select Scan Option from Free to Air and All. q Press Bor bto highlight Start Scan and press OK.
The television will start to search for available DVB-S channels. The progress bar will indicate the scan status.
When the search is complete, the Auto Tuning results screen will display the total number of services found.
r Press Bor bto move through the list to select a channel and press OK to view.
PLEASE NOTE
The Quick Setup menu can also be accessed at any time from the Setup/System Setup menu.
Done
Highlight Done and press OK.
o If your satellite dish is movable, the following Positioning screen will appear.
Positioning
Satellite : ASTRA 19.2°E
Transponder |
|
1/83 (10743 MHz H) |
|
|
|
Go to 0 |
|
|
|
|
|
Go to Stored Position |
|
|
|
|
|
Step Size |
|
1 |
|
|
|
Positioning |
W |
E |
Store Position
Signal Level 30%
Press Bor bto highlight Positioning and press Cor cto find the dish position with the strongest signal level.
From this menu, you can set the RF input configuration.
a Press MENU / Ccto highlight Setup icon.
b Press B/ Ccto highlight System Setup icon.
c Press OK to display System Setup menu.
d Press Bor bto select Ant/Cable/Satellite and press
Cor cto select Antenna, Cable or Satellite.
NOTE: When you attempt to change the Ant/Cable/ Satellite setting, a warning message will appear followed by PIN entry (if PIN has been set) and a prompt for Auto Tuning.
English
19
English
SETTING UP YOUR TV
e When Ant/Cable/Satellite is set to Cable, the following setting options will be provided in the Auto Tuning screen.
Press Bor bto select an item and press Cor cto select your desired option.
Auto Tuning
Tuning Mode |
|
DTV and ATV |
||
|
|
|
||
|
|
Start Scan |
|
|
DTV |
|
|
|
|
|
|
|
|
|
Scan Type |
|
Quick Scan |
||
|
|
|
|
|
Start Frequency |
|
Auto |
||
|
|
|
|
|
End Frequency |
|
Auto |
||
|
|
|
|
|
Modulation |
|
Auto |
||
|
|
|
|
|
Symbol Rate |
|
Auto |
||
|
|
|
|
|
Network ID |
|
Auto |
With the exception of DTV Scan Type and DTV Modulation items, all of the following items will have 2 operating modes. The first is Auto where the values for each item are preset by the system. The second is an Input mode where you will be able to enter a single value in place of the pre-set value. If no channel is currently tuned and the Input state is chosen, a system default value will be shown. However, if a channel is currently tuned when the item is accessed, the value of the current channel will be displayed.
DTV Scan Type:
This item determines whether a Quick Scan or a Full Scan will be executed.
The Quick Scan is a simplified version of the Full Scan that is designed to complete in less time.
DTV Start Frequency:
This sets the frequency from which the scan will begin.
From the System Setup menu, you can add the satellites that you wish to tune and configure detailed settings for each one individually.
To add a satellite:
a Press MENU / Ccto highlight Setup icon.
b Press B/ Ccto highlight System Setup icon.
c Press OK to display System Setup menu.
d Press Bor bto select Satellite Settings and press
OK.
Satellite Settings
Switch Type |
|
|
None |
|||||
|
|
|
|
|
||||
LNB Power |
|
|
|
On |
||||
No. |
Satellite |
|
Dish |
|
|
LNB |
||
1 |
|
|
ASTRA 19.2˚E |
|
1 |
|
|
1 |
|
|
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 |
|
|
|
|
|
|
|
|
Transponder : 1/83 (10743 MHz)
Dish Type : Fixed
Lower LOF (MHz) : 9600
Upper LOF (MHz) : 10600
Done
e Press bto highlight a new line to add an another satellite and press OK.
f Press buntil the required satellite is displayed and press OK.
DTV End Frequency:
This sets the frequency at which the scan will end.
DTV Modulation:
You can choose from five QAM modulation settings.
DTV Symbol Rate:
This is the baud rate (KS/s) of the scan.
DTV Network ID:
This is the Network ID to be utilized for the scan. This item is grayed out when DTV Scan Type is set to “Full Scan”.
To delete a satellite:
a In the Satellite Settings menu, press Bor bto select the satellite you want to delete.
b Press the RED button. A confirmation window will appear.
c Press Cor cto select Yes and press OK.
NOTE: It is not possible to delete position No.1.
20
SETTING UP YOUR TV
To edit the satellite settings:
a In the Satellite Settings menu, press Bto highlight
Switch Type.
b Press Cor cto select None, ToneBurst, DiSEqC 2way or DiSEqC 4way as your satellite switch type.
To delete a transponder:
a In the Transponder Settings menu, press Bor bto highlight the line you want to delete.
b Press the RED button.
c Press bto highlight LNB Power and press Cor cto select On or Off.
To add a transponder:
a In the Satellite Settings menu, press Bor bto highlight the line you want to edit and press OK.
|
1 |
ASTRA 19.2˚E |
1 |
1 |
|
|
|
|
|
|
|
b Press the GREEN button. The Transponder Settings screen will appear.
Transponder Settings |
|
|
|
|||
|
|
Frequency |
Polarisation |
Symbol Rate |
S/S2 |
|
|
1 |
10743 |
H |
22000 |
S |
|
2 |
10773 |
H |
22000 |
S |
|
|
3 |
10788 |
V |
22000 |
S |
|
|
4 |
10817 |
V |
22000 |
S |
|
|
5 |
10832 |
H |
22000 |
S |
|
|
6 |
10847 |
V |
22000 |
S |
|
|
|
7 |
10861 |
H |
22000 |
S |
|
|
8 |
10876 |
V |
22000 |
S |
|
|
|
|
|
|
|
|
c Press Bto highlight a new line.
Transponder Settings |
|
|
|
|||
|
|
Frequency |
Polarisation |
Symbol Rate |
S/S2 |
|
|
76 |
12640 |
V |
22000 |
S |
|
|
77 |
12662 |
H |
22000 |
S |
|
|
78 |
12669 |
V |
22000 |
S |
|
|
79 |
12692 |
H |
22000 |
S |
|
|
80 |
12699 |
V |
22000 |
S |
|
|
81 |
12721 |
H |
22000 |
S |
|
|
82 |
12728 |
V |
22000 |
S |
|
|
83 |
|
|
|
|
|
|
|
|
|
|
|
|
To edit the Transponder Settings:
a In the Transponder Settings menu, press Bor bto highlight the line you want to edit and press OK.
b Press Cor cto select Frequency, Polarisation,
Symbol Rate or S/S2, and set the item using the number buttons if necessary.
c Press OK to save your settings.
d Repeat steps 1 through 3 for other lines.
e Press the BLUE button to finish editing and return to Satellite Settings.
Press the GREEN button to cancel any edits that were made.
Press the YELLOW button to reset all transponder settings to their initial default settings.
To select the Dish Type:
a In the Satellite Settings menu, press Bor bto select the required satellite line and press OK.
b Press Cor cto highlight Dish and press the GREEN button.
Dish Settings
Dish : 1
Dish Type |
Fixed |
c Press Cor cto select Dish Type. You can select Movable or Fixed as the Dish Type.
d Press OK.
|
83 |
0 |
H |
0 |
S |
|
|
|
|
|
|
|
|
e Edit each parameter as required and press OK.
English
|
83 |
12731 |
H |
22000 |
S2 |
|
|
|
|
|
|
|
|
21
English
SETTING UP YOUR TV
To select the LNB Settings: |
|
|
|
e For DTV/ATV Tuning: |
|
|
|
||||||
a In the Satellite Settings menu, press Bor bto select |
|
A screen will appear warning that previous |
|||||||||||
|
the required satellite line and press OK. |
|
programmes and settings will be deleted. |
||||||||||
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
b Press Cor cto highlight LNB and press the GREEN |
|
|
Auto Tuning |
|
|
|
|||||||
|
|
Previous settings will be lost! |
|
||||||||||
|
button. |
|
|
|
|
|
|
||||||
|
|
|
|
|
|
Press EXIT for no change. |
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tuning Mode |
|
DTV and ATV |
|
||
|
LNB Settings |
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
LNB : 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Lower LOF |
9750 |
|
|
|
|
|
Start Scan |
|
|
|
|
|
|
Upper LOF |
10600 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Press Cor cto select DTV and ATV, DTV or ATV, if |
||||||||
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
c Press Bor bto select Lower LOF or Upper LOF and input the appropriate frequencies.
Auto Tuning
NOTE: As new services are broadcast, it will be necessary to re-tune the television in order to view them.
Auto Tuning will completely re-tune the television and can be used to update the channel list. It is recommended that Auto
Tuning is run periodically to ensure that all new services are added. All current channels and settings, i.e. locked channels, will be lost.
a Press MENU / Ccto highlight Setup icon.
b Press B/ Ccto highlight System Setup icon.
available, then highlight Start Scan and press OK to continue with the Auto Tuning.
NOTE: If you have selected “Others” for the Country field in the System Setup menu, and selected a tuning mode other than “DTV” , choose the optimum ATV broadcasting system (B/G, I, D/K or L).
The television will start to search for all available DTV and/or ATV services.
You must allow the television to complete the search.
When the search is complete, the Auto Tuning screen will display the services found.
For Satellite Tuning:
A screen will appear warning that previous programmes and settings will be deleted.
c
d
Press OK to display System Setup menu.
Press Bor bto select Auto Tuning and press OK.
System Setup
Menu Language |
English |
|
|
Country |
Germany |
Ant/Cable/Satellite
Satellite Settings
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
Auto Tuning
Previous settings will be lost! Press EXIT for no change.
|
|
Start Scan |
|
|
|
|
|
|
|
Satellite |
|
All |
||
|
|
|
|
|
Search Option |
|
Free to Air |
Press Bor bto highlight Satellite and press Cor cto select the desired satellite (No.1 Sat ~ No.4 Sat or
All).
You can select Free to Air or All as the Search Option. Highlight Start Scan and press OK to continue with the Auto Tuning.
When the search is complete, the Auto Tuning screen will display the services found.
f Use Bor bto move through the list to select a channel and press OK to view.
22
SETTING UP YOUR TV
The television can be tuned-in manually using ATV Manual Tuning. For example, you might use the feature if the television cannot be connected to a media recorder/decoder with a SCART lead or when you want to tune-in a station on another System.
Use Cand cto move across the screen and select any of the ATV Manual Tuning options. Then use Bor bto adjust the settings.
ATV Manual Tuning
System
1 I A C 2 0 V C R
1 2 3 4 5 6 7 8 9
1Position
The number to be pressed on the remote control to tune the channel.
2System
Specific to certain areas.
3Colour System
a In the System Setup menu, press bto select ATV Manual Tuning and press OK.
System Setup
Menu Language |
English |
|
|
Country |
Germany |
Ant/Cable/Satellite
Satellite Settings
Auto Tuning
ATV Manual Tuning
DTV Manual Tuning
DTV Settings
b Use Bor bto select the desired position. We suggest Pos. 0 for a media recorder.
ATV Manual Tuning |
|
|||
|
Pos. |
Channel |
Station |
|
|
1 |
|
C2 |
|
2S10
3C7
4S40
5C22
6C25
7C28
8C30
Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from external source.
4Skip
Set Skip to On (8) or Off (() for the selected channel. See page 24.
5Signal Class
The channel classification.
6Channel
The channel number on which a station is being broadcast.
7Search
Search up and down for a signal.
8Manual Fine Tuning
Only used if interference/weak signal is experienced. See page 92.
9Station
Station identification. Use the Bband Ccbuttons to enter up to seven characters.
To allocate a position on the television for a decoder and media recorder: turn the decoder on, insert a pre-recorded film in the media recorder, press PLAY and manually tune.
Different Channel numbers may be displayed.
c Press OK to select. If the channel chosen for the media recorder is set to skip, Skip should be removed before storing.
d Press cto select System and press Bor bto change if required.
ATV Manual Tuning
System
1 |
I |
A |
C |
2 |
|
0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
e Then press cto select Search.
f Press Bor bto begin the search. The search symbol will flash.
ATV Manual Tuning
Search
1 |
I |
A |
|
|
C |
2 |
|
0 |
|
|
English
23
English
SETTING UP YOUR TV
g Each signal will show on the television. If it is not your media recorder, press Bor bagain to restart the search.
h When your media recorder signal is found, press cto move along to Station. Use B, b, Cand cto put in the required characters, e.g. VCR.
ATV Manual Tuning
Station
1 |
I |
|
A |
C |
2 |
|
0 |
|
V |
|
C |
|
R |
|
|
|
|
|
|
|
|
i Press OK to save.
j Repeat for each position you want to tune, or press BACK to return to the list of channels and select the next number to tune.
k Press EXIT when you have finished.
PLEASE NOTE
This television has direct channel entry if the channel numbers are known.
Select the ATV Manual Tuning screen in Step 3. Enter the Position number, the System, then C for standard (terrestrial) channels or S for cable channels and the Channel number. Press OK to save.
To prevent certain channels from being viewed, positions can be skipped.
a Select ATV Manual Tuning from the System Setup menu.
b Use Bor bto highlight the position to be skipped and press OK to select.
ATV Manual Tuning |
|
|||
|
Pos. |
Channel |
Station |
|
|
1 |
|
C2 |
|
2S10
3C7
4 |
|
S40 |
ABC1 |
|
|
|
|
5 |
|
C22 |
ABC1 |
6C25
7C28
8C30
c Press cto select Skip.
d Use Bor bto turn Skip on. Press OK.
8on the screen indicates a skipped position.
ATV Manual Tuning
Skip: On
1 I A C 2 0
e Press BACK and repeat from Step 2 or press EXIT.
Each position has to be individually selected. To turn Skip off, repeat the procedure for each position.
Skipped positions cannot be selected by PUand Pu or by the controls on the television but can still be accessed by the number buttons on the remote control.
Channels may be moved and saved to the position of your choice.
a Select ATV Manual Tuning from the System Setup menu.
b With the list of channels showing, use Bor bto highlight the channel you want to move and press c.
ATV Manual Tuning |
|
|
|||
|
Pos. |
|
Channel |
Station |
|
|
2 |
|
S10 |
|
|
|
|
|
|
|
|
|
3 |
C7 |
|
|
|
|
|
|
|
|
|
|
4 |
|
C40 |
ABC1 |
|
|
|
|
|
|
|
|
5 |
|
C22 |
ABC1 |
|
|
|
|
|
|
|
|
1 |
|
C2 |
|
|
6C25
7C28
8C30
c Use Bor bto move through the list to your preferred position. As you do so, the other channels will move to make room.
d Press Cto save your move.
Repeat as necessary and press EXIT.
24
SETTING UP YOUR TV
NOTE: The content of this menu varies depending on the DTV input (Antenna, Cable, or Satellite) that is currently selected.
This feature is available for service engineers or can be used for direct channel entry if the multiplex channel is known.
a Select DTV Manual Tuning from the System Setup menu and press OK.
DTV Manual Tuning
Signal Strength |
WEAK |
AVERAGE |
STRONG |
|||
|
|
|
|
|
|
|
Quality |
|
GOOD |
|
|
|
|
|
|
|
|
|
|
|
Channel |
|
|
|
|
13 |
|
|
|
|
|
|
|
|
|
|
Start Scan |
|
|
b Enter the multiplex number using the number buttons or use Cor cto adjust the number up or down.
c Highlight Start Scan and press OK. The television will automatically search for that multiplex.
DTV Manual Tuning |
|
|
|
|
|||
|
|
|
0 New Channels - Total 6 |
|
|
|
|
New Pos. |
Name |
|
Type |
||||
|
1 |
|
ABC ONE |
|
|
|
|
2 ABC TWO
7 ABC THREE
40 ABC NEWS 24
51 ABCi
When the multiplex is found, any channels that are not currently in the channel list will be added and the channel information at the top of the screen will be updated.
d Repeat as necessary. Press EXIT to finish.
When Ant/Cable/Satellite is set to Cable, DTV Manual Tuning items are as follows:
Frequency – input a specific frequency to be scanned
Modulation – choose from one of five QAM modulation options
Symbol Rate – input a specific baud rate (KS/s) to be used for the manual scan
Highlight Start Scan and press OK.
When Ant/Cable/Satellite is set to Satellite, DTV Manual Tuning items are as follows:
DTV Manual Tuning - Satellite
Signal Strength |
WEAK |
|
AVERAGE |
STRONG |
|
|
|
|
|
|
|
Quality |
POOR |
|
|
|
|
|
|
|
|
||
Satellite |
|
|
ASTRA 28.2°E |
||
|
|
|
|
|
|
Transponder |
|
|
|
1/83 |
|
|
|
|
|
||
Frequency |
|
|
10714 MHz |
||
|
|
|
|
||
Symbol Rate |
|
|
22000 KS/s |
||
|
|
|
|
|
|
Polarisation |
|
|
|
H |
|
|
|
|
|
||
Search Option |
|
|
Free to Air |
Start Scan
Press Bor bto highlight an item (Satellite, Transponder,
Frequency, Symbol Rate, Polarisation or Search Option) and press Cor cto select the required option.
Highlight Start Scan and press OK.
English
25
English
SETTING UP YOUR TV
The channel order may be changed to suit your personal preference.
a Select DTV Settings from the System Setup menu and press OK.
b Select Channels and press OK.
DTV Settings
Channels |
|
|
|
Subtitle and Audio |
|
Parental PIN Setup |
|
|
|
Parental Control |
|
|
|
Local Time Setting |
|
|
|
Standby Channel Update |
Off |
|
|
DVB Character Set |
Standard |
|
|
Dynamic Scan |
On |
c For your convenience, you can jump to specific places in the list by one of two methods.
Channels |
|
TV |
|
|
||||
Line No. 1/10 |
Sort : A-Z Sort |
|||||||
Pos. |
Name |
|
|
|
|
|
||
1 |
|
|
ABC ONE |
|
|
|
|
|
2 ABC TWO
7 ABC THREE
30 CABC Channel
40 ABC NEWS 24
51 ABCi
822 AA
823 AC
Line Number Jump — Use the number buttons
(0-9) to input the line number you want to select and press OK.
Name Jump — Press CCor ccto jump to the next station name with a different initial letter.
It is also possible to change the Position number of a particular channel.
Renumber — Press the RED button to renumber the highlighted channel. Edit the channel number using the number buttons and press OK. If the position number you input already exists, a confirmation window will appear.
|
|
Pos. |
Name |
|||
|
- |
- |
- |
- |
ABC ONE |
|
|
|
|
|
|
|
|
Move — Press the GREEN button to activate the Move feature. Press the Bor bbuttons to select the channel you wish to move and press OK to check.
If you wish to move multiple channels at once, select another channel and check in the same way. Repeat as necessary.
Once all desired channels have been checked, press the Bor bbuttons to place the focus at the position to which you wish to move the channels. The channels will be inserted above the highlighted channel. Press the GREEN button to execute the move.
Channels
Line No. 1/10
Pos. Name
1 ABC ONE
2 |
ABC TWO |
7 |
ABC THREE |
30 |
CABC Channel |
40 |
ABC NEWS 24 |
51 |
ABCi |
822 |
AA |
823 |
AC |
TV
Sort : A-Z Sort
Sort — Press the YELLOW button. A confirmation window will appear. Press Cor cto select Yes and press OK.
Sort
Your existing channel order will be lost. Do you wish to continue?
Yes
The Sorting Type selection window will appear.
Sort
Sorting Type |
Number |
Sort
Press Cor cto set the sorting type.
A-Z Sort Station name order (A to Z)
Number Position No. order (numerical sequence) Press bto highlight Sort and press OK.
26
SETTING UP YOUR TV
a Select DTV Settings from the System Setup menu and press OK.
b Select Channels and press OK.
The satellite channel list will appear.
Channels |
Satellite TV |
|
|
|||
Line No. 3/1200 |
|
|
|
|
||
|
Pos. |
Station |
Satellite |
|||
|
1 |
DDD |
19.2°E |
|
|
|
|
2 |
AB |
19.2°E |
|
|
|
|
3 |
E |
19.2°E |
|
|
|
|
801 |
BBC |
22.5°E |
|
|
|
|
802 |
BB |
22.5°E |
|
|
|
|
803 |
BA |
22.5°E |
|
|
|
|
822 |
AA |
25.6°E |
|
|
|
|
823 |
AC |
25.6°E |
|
|
|
c For your convenience, you can edit and sort your channel list.
Line Number Jump — Press the number buttons
(0-9) to input the line number you want to select and press OK.
Station Letter Jump — Press CCor ccto jump to the next station name with a different initial letter.
Satellite Jump — Press Zor zto jump to the next channel on a different Satellite.
Renumber — Same as Antenna/Cable channels. See page 26.
Move — Same as Antenna/Cable channels. See page 26.
Group — Press C or cto select All or By Satellite.
Sorting Type — Press C or cto set the sorting type.
A - Z Sort
Number
Preset Order — Press C or cto set Yes or No.
This item is displayed when Country is set to Germany, and only applies to the Astra 19.2°E satellite.
Press bto highlight Sort and press OK.
If the Standby Channel Update is set to On, when the TV is in standby mode, Digital Tuning is automatically executed and any new channels are saved.
a Select DTV Settings from the System Setup menu and press OK.
b Press bto select Standby Channel Update and press Cor cto select On.
This feature allows you to manually select the character set (Standard = Table 0, West = Table 5 or Latin alphabet 9) to be used for DVB-C or DVB-T channels.
a Select DTV Settings from the System Setup menu and press OK.
b Press bto select DVB Character Set and press Cor cto select Standard, West or Latin alphabet 9.
Sort — Press the YELLOW button. A confirmation window will appear. Press Cor cto select Yes and press OK.
The Sort menu will appear.
|
Sort |
|
|
|
|
|
Group |
|
By Satellite |
|
|
|
Sorting Type |
|
Number |
|
|
|
Preset Order |
|
Yes |
|
|
|
|
Sort |
|
||
|
|
|
|
|
|
If the broadcast information has changed in your DVB-T receiving area, the TV screen will display the message “Broadcast information has changed. Would you like to rescan now?”. Select Yes or No. If you do not wish for the TV to detect changes and prompt you to rescan, you should set this feature to “Off”.
a Select DTV Settings from the System Setup menu and press OK.
b Press bto select Dynamic Scan and press Cor cto select On.
English
27
English
SETTING UP YOUR TV
You can select either Home or Store mode. Home is recommended for normal home use. Select Store when using the television for displaying in a shop, etc.
a Select Location from the System Setup menu.
b Press Cor cto select Home or Store.
This is a digital television which is integrated to allow the use of both digital and analogue services. However, during the lifetime of this set it is very likely that analogue services will be switched off to allow for more new digital services.
This ‘switch-off’ will happen in a number of phases, which will be advertised in your area well in advance. It is recommended that at each phase the television is re-tuned to ensure that existing and new digital services can be viewed without disruption.
28
Quick Menu helps you access some options quickly, such as
Picture Mode, Picture Size, Personal Mode, More Information, Sleep Timer etc.
Press QUICK to display the Quick Menu and use Bor bto select the option.
Menu Example (UL series)
Quick Menu
Picture Mode |
|
AutoView |
|||
|
|
|
|
|
|
Picture Size |
|
Super Live |
|||
Personal Mode |
|
|
|
|
|
|
|
|
|
|
|
More Information |
|
|
|
|
|
|
|
|
|
|
|
Channel Options |
|
|
|
|
|
|
|
|
|
|
|
Sleep Timer |
00:00 |
|
|||
|
|
|
|
|
|
REGZA-LINK Device Control |
|
|
|
|
|
|
|
|
|
|
|
Speakers |
|
TV Speakers |
|||
|
|
|
|
|
|
Headphone Level |
50 |
|
|
|
|
|
|
|
|
|
|
Wireless Information |
|
|
|
|
|
|
|
|
|
|
|
Recording Information |
|
|
|
|
|
NOTE: Quick Menu items are different depending on the current mode.
Quick menu item example
Mode |
Quick menu item |
Description |
|
When viewing a TV |
Picture Mode |
See page 34. |
|
programme or |
|
|
|
Picture Size |
See page 32. |
||
pictures from the |
|||
|
|
||
external input |
Personal Mode |
See page 85. |
|
|
|
|
|
|
More Information |
See page 75. |
|
|
|
|
|
|
Channel Options |
See page 77. |
|
|
|
|
|
|
Sleep Timer |
See page 73. |
|
|
|
|
|
|
REGZA-LINK Device |
See page 88. |
|
|
Control |
|
|
|
|
|
|
|
Speakers |
See page 87. |
|
|
|
|
|
|
Headphone Level |
See page 31. |
|
|
|
|
|
|
Wireless Information |
See page 45. |
|
|
|
|
|
When using EPG |
Genre Colour |
See page 76. |
|
|
|
|
|
|
EPG Update/ |
See page 75. |
|
|
Cancel EPG Update |
|
|
|
|
|
|
Media Player |
Sort |
See page 65. |
|
(Photo Multi View, |
|
|
|
Interval Time |
See page 65. |
||
List View) |
|||
|
|
||
|
Repeat |
See page 65. |
|
|
|
|
|
|
Shuffle |
See page 69. |
|
|
|
|
|
|
Device Information |
See page 65. |
|
|
|
|
|
|
Wireless Information |
See page 45. |
|
|
|
|
Mode |
Quick menu item |
Description |
|
Photo Frame |
Picture |
See page 34. |
|
(Full Screen) |
|
|
|
Picture Size |
See page 32. |
||
|
|||
|
|
|
|
|
Personal Mode |
See page 85. |
|
|
|
|
To select a channel, use the numbered buttons on the remote control.
Channels can also be selected using PUand Pu.
To display on-screen information such as channel, input mode or stereo/mono signal, press . Press again to cancel.
The time display facility allows the current (text service) time to be seen on the television screen.
Press Dwhilst watching a normal television broadcast to see the time display from the broadcaster. It will remain on screen for about 5 seconds.
NOTE: This display may not be available in some cases.
For DTV programmes
For stereo or dual mono broadcasts, press sand use Cor cto select settings.
Mode Display |
Pressing c |
Stereo |
Stereo SLeft SRight |
|
|
Dual mono |
Dual 1 SDual 2 SDual |
|
|
Mono |
– |
|
|
Multichannel |
– |
|
|
For multi-audio track broadcasts, press srepeatedly to change the audio language (see “Audio languages” on page 78).
For ATV programmes
If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time positions are changed, disappearing after a few seconds. If the broadcast is not in stereo, the word Mono will appear.
Stereo… Press sto select Stereo or Mono.
Bilingual… Bilingual transmissions are rare. If they are transmitted, the word Dual will be displayed. Choose the required programme number, and if the word Dual appears, press sto select Dual 1, Dual 2 or Mono.
English
29
English
CONTROLS AND FEATURES
Volume
Press yor Yto adjust the volume.
Sound Mute
Press once to turn the sound off and again to cancel.
If a programme or film is being broadcast with a soundtrack in more than one language, the Dual feature allows selection between them.
a Press MENU / Ccto highlight Setup icon.
b Press B/ Ccto highlight Sound icon and press OK.
c Press Bor bto select Dual and press Cor cto choose between Dual 1 or Dual 2.
|
Sound |
|
|
|
|
|
|
|
Dual |
|
Dual 1 |
|
|||
|
Balance |
0 |
|
|
|
|
|
|
|
|
|
|
|||
|
Advanced Sound Settings |
|
|
|
|
|
|
|
Dolby Volume |
|
Low |
|
|||
|
Dynamic Range Control |
|
Off |
|
|||
|
Audio Level Offset |
|
|
|
|
|
|
|
Headphone Settings |
|
|
|
|
|
|
|
Audio Description |
|
|
|
|
|
|
Balance
a In the Sound menu, press Bor bto select Balance and press Cor cto emphasize left or right speaker balance.
You can customize current sound mode settings. Select the appropriate mode in accordance with the installation location of the TV (Stand or Wall) and adjust the equalizer on-screen as desired.
a In the Sound menu, press Bor bto select Advanced Sound Settings and press OK.
b Press Bor bto select Sound Navi and press OK.
|
Advanced Sound Settings |
|
|
|
Sound Navi |
|
|
|
Surround |
Off |
|
|
Voice Enhancement |
On |
|
c Press Cor cto select either Stand or Wall depending on how your TV is installed and press the RED button.
d Press Cor cto select the frequency range you want to adjust from the equalizer window and press Bor bto adjust the level.
|
Sound Navi |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
TV Mounting |
|
|
|
|
|
|
|
|
|
|
|
|
Stand |
|
|||||
+20 |
|
|
|
|
|
|
Equalizer |
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
-20 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
100 |
330 |
1K |
3.3K |
10K |
[Hz] |
|||||||||||||||
2 |
|
1 |
|
0 |
|
|
1 |
|
2 |
|
[Level] |
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
e Repeat step 4 for other frequencies.
Surround and Voice Enhancement help to create an enhanced surround sound experience with deep, rich bass from stereo sound sources. Your TV’s audio will sound fuller, richer, and wider.
a In the Sound menu, press Bor bto select Advanced Sound Settings and press OK.
b Press Bor bto select Surround and press Cor cto select Off, Spatial or Cinema.
Advanced Sound Settings |
|
Sound Navi |
|
Surround |
Off |
Voice Enhancement |
On |
This feature provides a consistent sound volume regardless of programmes, channels or input sources.
a In the Sound menu, press Bor bto select Dolby Volume.
b Press Cor cto select Low, High or Off.
NOTE:
•The Dolby Volume setting influences the Dynamic Range Control and Digital Audio Output settings.
•This feature will automatically switch Off when Dynamic Range Control is set to On or Digital Audio Output is set to Auto.
30