TANDBERG D13751.01 User Manual

D13751.01 Page 1

Installation

Tactical

MXP

DC Power supply
4 ISDN cables
Ethernet cable
PC cable DVI/VGA
Headset
Shoulder strap
User Manual CD-Rom

Speaker

Camera

LCD Screen

User interface
panel

Microphone

Codec
(Underneath
storage)

Accessories box:

Extra Remote
control

Headset

AC Power

Note: Remove accessories box and other
equipment from storage area when in use.

Network

Wireless LAN

PC

Storage area for PC
or other equipment

In plastic bag: 4 Power cables

If the menu is not already present, press the
OK/Menu key on the remote control to open
the menu. Navigate the menu with arrow keys
and OK. Go one step back with the Cancel
key. Close all menus by pressing Cancel for 1
second.

2. Language

Open ‘General’. Select language and press ‘Save’.

3. ISDN Conguration

Open ‘Network - ISDN-BRI Settings’. Make ISDN
conguration and press ‘Save’.

1. Open the Administrator Settings menu

Choose ‘Control Panel’ from the main menu. In
‘Control Panel’, select ‘Administrator Settings’ and
press OK.

4. LAN Conguration

Open ‘Network -LAN Settings’. Make IP/H.323
settings and press ‘Save’.

The Remote Control

Please read the user manual
for further details.

System Conguration

1. Mic off: Mute and unmute the microphone.

2. Arrow keys: Navigate in menus or move camera.

3. Volume: Adjust the volume up and down.

4. Layout: Change picture layout on the screen.

5. Cancel: Go one step back or close menu.

6. Call: Press Call to start calling.

7. Presets: Activate presets in a call.

8. Snapshot: Send a snapshot in a call.

9. Presentation: Show PC (default).

10. OK/Menu: Navigate in menus.

11. Zoom: Zoom camera in and out.

12. Selfview: Show outgoing video picture (yourself).

13. Phone Book: Open Phone Book.

14. End Call/Standby: End call or go to standby.

15. Number keys: Dial a number.
16 Touch Tones: Press Touch Tones in a call to dial

extension numbers e.t.c.

D13751.01 Page 2