ACTIVE SPEAKERS SLB 1.2 D2
ACTIVE SPEAKERS
Operating instructions
AKTIV-HØJTALER
Betjeningsvejledning
ACTIEVE LUIDSPREKERS
Gebruiksaanwijzing
AKTIV-LAUTSPRECHER
Bedienungsanleitung
IAN 285664
Before reading, unfold the page containing the illustrations and familiarise
yourself with all functions of the device.
Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.
Vouw vóór het lezen de pagina met de afbeeldingen open en maak u vertrouwd met alle functies van het apparaat.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen
Sie sich anschließend mit allen Funktionen des Gerätes vertraut.
GB / IE/NI Operating instructions Page 1
DK Betjeningsvejledning Side 13
NL / BE Gebruiksaanwijzing Pagina 25
DE / AT / CH Bedienungsanleitung Seite 37
Table of contents
Introduction .................................. 2
Information concerning these operating instructions ...........2
Copyright ............................................2
Limitation of liability ....................................2
Notes on trademarks ...................................2
Warnings ............................................2
Intended use ..........................................3
Safety ....................................... 3
Basic safety instructions .................................3
Initial operation ............................... 5
Check scope of delivery .................................5
Disposal of packaging ..................................5
Fitting the support feet ..................................6
Installation site requirements .............................6
Controls ..................................... 6
Handling and use ............................. 7
System requirements ....................................7
Connecting the loudspeaker ..............................7
Switching on/off and adjusting the volume ..................7
Switching the light on and off .............................7
Switching bass and treble boost on/off .....................8
Connecting headphones ................................8
Fault rectification .............................. 9
Malfunction causes and remedies .........................9
Cleaning .................................... 10
Safety instructions .....................................10
Storage/Disposal ............................10
Storage when not in use ................................10
Disposal of the device .................................10
Appendix ................................... 10
Technical details ......................................10
Notes on the EU-Declaration of Conformity .................11
Kompernass Handels GmbH warranty ....................11
Service .............................................12
Importer ............................................12
SLB 1.2 D2
GB│IE│NI
│
1 ■
Introduction
Information concerning these operating instructions
Congratulations on the purchase of your new device.
You have decided to purchase a high-quality product. The operating
instructions are a constituent of this product. They contain important
information with regard to safety, use and disposal. Before using the
product, familiarise yourself with all operating and safety instructions.
Use this device only as described and only for the specified areas of
application. Retain these instructions for future reference. Please also
pass these operating instructions on to any future owner(s).
Copyright
This documentation is subject to copyright protection.
Any copying or reproduction of it, including as extracts, as well as
the reproduction of images, also in an altered state, is only permitted
with the written authorisation of the manufacturer.
Limitation of liability
All technical information, data and information for installation,
connection and operation contained in these operating instructions
correspond to the latest version at time of printing and, to the best
of our knowledge, take into account our previous experience and
know-how. No claims can be derived from the details, illustrations
and descriptions in these instructions. The manufacturer assumes
no responsibility for damage caused by failure to observe these
instructions, improper use, incompetent repairs, making unauthorised
modifications or for using non-approved replacement parts.
Notes on trademarks
- USB is a registered trademark of USB Implementers Forum, Inc.
All other names and products may be trademarks or registered
trademarks of their respective owners.
Warnings
The following warnings are used in these operating instructions:
DANGER
A warning at this risk level indicates a potentially
dangerous situation.
Failure to avoid this hazardous situation could result in physical
injury or death.
► Follow the directives in this warning to avoid personal injuries.
■ 2 │ GB
│IE│
NI
SLB 1.2 D2
CAUTION
A warning of this risk level indicates potential
damage to property.
Failure to avoid this situation could result in damage to property.
► Follow the instructions in this warning to prevent damage to
property.
NOTE
► A note indicates additional information that will assist you in
handling the device.
Intended use
These speakers are information electronics devices designed exclusively
for connection to a PC, a notebook, or an audio device* (e.g. MP3
player) via a 3.5 mm jack plug. This device is exclusively for private use,
and is not intended for industrial or commercial purposes. The device
is not intended for any other use or for uses extending beyond those
stated. Claims of any kind for damage arising as a result of non-intended
use will not be accepted. The user is the sole bearer of the risk.
* If the loudspeaker is to be connected to a device without a USB
connection, an external power supply with USB output is required
(not included in delivery). The mains adapter should have the following specifications: 5 V
, min. 500 mA.
Safety
This section provides you with important safety information regarding
the handling of the device. The device complies with the statutory
safety regulations. Incorrect usage can lead to personal injury and
property damage.
Basic safety instructions
For safe handling of the device, follow the safety information below:
■ Check device for visible external damage before use. Do not use
devices that have been damaged or dropped.
■ Damaged cables or connections should be replaced by the
Customer Service department.
■ Always grasp the connection cable by the plug. Do not pull on
the power cable itself!
■ Do not place any objects, furniture or similar on the connection
cable and make sure that the cable is not trapped.
■ Never make a knot in the connection cable and do not bind it
together with other cables. The power cable should be routed
so that it cannot be stepped on or tripped over.
SLB 1.2 D2
GB│IE│NI
│
3 ■
■ This device may be used by children aged 8 years and above
and by persons with limited physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are
under supervision or have been told how to use the device safely
and are aware of the potential risks. Children must not use the
device as a plaything. Cleaning and user maintenance tasks may
not be carried out by children unless they are supervised.
■
DANGER! Packaging materials such as plastic film or
polystyrene must not be used by children as a plaything.
Risk of suffocation!
■ Only have repairs carried out by authorised specialist companies
or the Customer Service department. Improper repairs can pose
significant risks to the user. Warranty claims also become void.
■ Repairs to the device during the warranty period may only be
carried out by a customer service department authorised by the
manufacturer. Otherwise no additional warranty claims can be
considered for subsequent damage.
■ Defective components must always be replaced with original
replacement parts. It can only be guaranteed that safety requirements are complied with if original replacement parts are used.
■ Never attempt to open the device. There are no parts which can
be cleaned or maintained inside the device. Do not perform any
modifications or changes to the device yourself.
■ Never operate the device in the vicinity of naked flames, and do
not place candles on or next to the device.
■ Protect the device from moisture, spray and dripping water and
the penetration of liquids. Do not place objects containing liquid
(e.g. flower vases) on or near the device.
■ If liquid penetrates the device, switch it off, disconnect it from
the power supply and have it inspected by qualified specialists
before using it again.
■ If the device is moved from cold to warm surroundings, wait for
approx. 2 hours until the device has reached the ambient temperature before switching it on.
■ If you are using a USB power supply, the mains socket used must
always be easily accessible so that the USB power supply can
be quickly disconnected from the socket in a hazardous situation.
You should also observe the operating instructions for the USB
power supply.
■ If you notice a burning smell or smoke coming from your device,
unplug all connections immediately.
■ 4 │ GB
│IE│
NI
SLB 1.2 D2
Initial operation
Check scope of delivery
(see fold-out page)
This device is supplied with the following components as standard:
▯ Loudspeakers
▯ 2 support feet
▯ This operating manual
♦ Remove all parts of the device and the operating instructions
from the box.
♦ Remove all packaging material.
NOTE
► Check the contents for completeness and for signs of visible
damage.
► If the contents are incomplete or damaged due to defective
packaging or through transportation, contact the Service
Hotline (see chapter Service).
Disposal of packaging
The packaging protects the device from transport damage.
The packaging materials have been selected in accordance with
their environmental friendliness and disposal attributes, and are
therefore recyclable.
6
7
The recirculation of packaging into the material cycle
saves raw materials and reduces the amount of waste
generated. Dispose of packaging material that is no
longer needed in accordance with applicable local
regulations.
NOTE
► If possible, keep the original packaging during the warranty
period so that the device can be properly packed for returning
in the event of a warranty claim.
SLB 1.2 D2
GB│IE│NI
│
5 ■
Fitting the support feet
♦ Slide the support feet 7 onto the loudspeaker guide rails from
6
behind
(see fig. 1).
6
7
Fig. 1
Installation site requirements
For safe and trouble-free operation of the device, the installation site
must fulfil the following requirements:
■ The device must be placed on a firm, flat and level surface.
■ Do not place the device in a hot, wet or extremely moist environ-
ment or in the vicinity of flammable materials.
■ Place the device so that it is not exposed to direct sunlight, strong
artificial light or heated air.
Controls
2
3
4
5
6
7
8
9
■ 6 │ GB
LIGHT switch (ON / OFF)
TREBLE switch (ON / OFF)
BASS switch (ON / OFF)
Rotary switch (on/off and volume control)
Headphone socket (3.5 mm jack plug)
Loudspeaker
Support foot
Loudspeaker cable with 3.5 mm jack plug
Power supply cable with USB plug
│IE│
NI
SLB 1.2 D2
Handling and use
This section provides you with important information on handling and
using the device.
System requirements
▯ Computer with sound card and USB connection
or
▯ audio device with audio output (3.5 mm jack plug) and USB
connection (alternatively with external USB power supply).
Connecting the loudspeaker
♦ Ensure that the rotary switch 4 is in the “OFF” position.
♦ Plug the 3.5 mm jack plug
socket of your audio device (e.g. notebook, MP3 player).
The audio signals are transmitted via this connection.
♦ Plug the USB plug
(alternatively into the USB socket of an external USB power
supply). The mains adapter should have the following specifications: 5 V , min. 500 mA. The power supply for the
loudspeaker 6 is provided via this connection.
NOTE
► The loudspeakers 6 do not work without a USB connection!
Switching on/off and adjusting the volume
♦ Turn the rotary switch 4 clockwise until a click is heard in
order to switch the loudspeakers 6 on.
♦ Turn the rotary switch
increase the volume.
♦ Turn the rotary switch
♦ Turn the rotary switch
(OFF position) in order to switch the loudspeakers
8
into the line out or headphone
9
into a USB socket of your audio device
4
further in a clockwise direction to
4
anticlockwise to decrease the volume.
4
anticlockwise until a click is heard
6
off.
Switching the light on and off
♦ Turn the LIGHT switch to the “ON” position in order to
switch the loudspeaker 6 light on.
♦ Turn the LIGHT switch
switch the loudspeaker 6 light off.
SLB 1.2 D2
to the “OFF” position in order to
GB│IE│NI
│
7 ■
Switching bass and treble boost on/off
♦ Turn the BASS switch 3 to the “ON” position in order to
switch the loudspeaker
♦ Turn the BASS switch
switch the loudspeaker
♦ Turn the TREBLE switch
6
bass boost on.
3
to the “OFF” position in order to
6
bass boost off.
2
to the “ON” position in order to
switch the loudspeaker 6 treble boost on.
♦ Turn the TREBLE switch
2
to the “OFF” position in order to
switch the loudspeaker 6 treble boost off.
Connecting headphones
DANGER
Loud music can lead to hearing damage.
► Avoid extremely loud sound levels, especially over
long periods of time, when you are using head-
phones.
♦ Ensure that the rotary switch
♦ Insert the 3.5 mm jack plug of the headphones into the head-
phone socket
5
.
♦ Before placing the headphones on your head, switch the loud-
speaker
6
on again and carefully increase the volume.
NOTE
► As soon as you connect the headphones, the loudspeakers 6
will be muted.
► The headphone output is passive, which means that the volume
can be controlled using the rotary switch 4, but the maximum
volume is specified by the computer or audio device. Please
note that headphones may only be connected if the audio device
has the necessary standard volume limitation applied to its
output. Please refer to your audio device instruction manual for
more information.
4
is in the OFF position.
■ 8 │ GB
│IE│
NI
SLB 1.2 D2
Fault rectification
This section contains important information on fault localisation and
rectification. Observe the instructions in order to avoid risks and
damage.
Malfunction causes and remedies
CAUTION
The loudspeakers may not be opened!
► There are no parts which can be cleaned or maintained inside
the device. Opening the loudspeakers will result in irreparable
damage to the device.
The following table will help with localising and remedying minor
malfunctions:
Defect Possible cause Rectification
No sound.
No sound or
volume too low
on connected
headphones.
The volume control of
the player or the loudspeaker
the minimum volume.
The audio device has
been muted.
Audio device or
loudspeaker
switched on.
The 3.5 mm jack plug
into the audio device's
headphone socket.
The 3.5 mm jack plug
of the headphones
is connected to the
headphone socket
The volume control
of the audio device
is set to the minimum
volume.
Headphones defective.
6
is set to
6
not
8
is not fully inserted
5
Increase the volume
at the audio device or
the loudspeaker 6.
Switch the audio
device muting off
again.
Ensure that all devices
are switched on.
Insert the 3.5 mm
jack plug 8 fully
into the socket.
Pull the 3.5 mm jack
plug of the headphones out of the
.
headphone socket 5.
Increase the volume
at the audio device.
Check the headphone function on the
audio device itself.
NOTE
► If the aforementioned solutions do not resolve the problem,
please contact Customer Service (see chapter Service).
SLB 1.2 D2
GB│IE│NI
│
9 ■
Cleaning
Safety instructions
CAUTION
Possible damage to the device
Penetrating moisture can cause damage to the device.
► To avoid irreparable damage, ensure that no moisture
penetrates the device during cleaning.
■ Clean the housing of the device with a lightly moistened cloth
and a mild detergent only.
Storage/Disposal
Storage when not in use
Store the device in a dry environment.
Disposal of the device
The symbol of a crossed-out wheelie bin means that this
product is subject to European Directive 2012/19/EU
and may not be disposed of in the domestic waste. The
product must be taken to a dedicated collection point
for electrical and electronic appliances.
This disposal is free of charge for the user. You will be
helping to protect both the environment and your personal health and recycling valuable raw materials.
More information on disposal and the nearest collection point is
available from your town council.
Appendix
Technical details
Output power 2 x 0.6 W
Voltage supply
- input voltage
- current consumption
Audio connection: 3.5 mm jack plug
Headphone connection 3.5 mm jack socket
Operating temperature +5 - +35°C
Storage Temperature 0 - +40°C
Humidity (no condensation) 15 - 75 %
Dimensions (W x H x D) approx. 8.5 x 22 x 8.5 cm
Weight 490 g approx.
■ 10 │ GB
│IE│
NI
via USB-A plug
5 V
max. 500 mA
SLB 1.2 D2
Notes on the EU-Declaration of Conformity
With regard to conformity with the basic requirements
and other relevant provisions, this device complies
with the Electromagnetic Compatibility Directive
2014/30/EU and the RoHS Directive 2011/65/EU.
The full EU-Declaration of Conformity is available from
the importer.
Kompernass Handels GmbH warranty
Dear Customer,
This appliance has a 3-year warranty valid from the date of purchase.
If this product has any faults, you, the buyer, have certain statutory
rights. Your statutory rights are not restricted in any way by the warranty described below.
Warranty conditions
The validity period of the warranty starts from the date of purchase.
Please keep your original receipt in a safe place. This document will
be required as proof of purchase.
If any material or production fault occurs within three years of the
date of purchase of the product, we will either repair or replace the
product for you at our discretion. This warranty service is dependent
on you presenting the defective appliance and the proof of purchase
(receipt) and a short written description of the fault and its time of
occurrence.
If the defect is covered by the warranty, your product will either be
repaired or replaced by us. The repair or replacement of a product
does not signify the beginning of a new warranty period.
Warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the
warranty. This also applies to replaced and repaired components.
Any damage and defects present at the time of purchase must be
reported immediately after unpacking. Repairs carried out after expiry of the warranty period shall be subject to a fee.
Scope of the warranty
This appliance has been manufactured in accordance with strict quality guidelines and inspected meticulously prior to delivery.
The warranty covers material faults or production faults. The warranty
does not extend to product parts subject to normal wear and tear
or fragile parts such as switches, batteries, baking moulds or parts
made of glass.
The warranty does not apply if the product has been damaged, improperly used or improperly maintained. The directions in the operating instructions for the product regarding proper use of the product are
to be strictly followed. Uses and actions that are discouraged in the
operating instructions or which are warned against must be avoided.
SLB 1.2 D2
GB│IE│NI
│
11 ■
This product is intended solely for private use and not for commercial
purposes. The warranty shall be deemed void in cases of misuse or
improper handling, use of force and modifications / repairs which
have not been carried out by one of our authorised Service centres.
Warranty claim procedure
To ensure quick processing of your case, please observe the following instructions:
■ Please have the till receipt and the item number (e.g. IAN
12345) available as proof of purchase.
■ You will find the item number on the type plate, an engraving on
the front page of the instructions (bottom left), or as a sticker on
the rear or bottom of the appliance.
■ If functional or other defects occur, please contact the service
department listed either by telephone or by e-mail.
■ You can return a defective product to us free of charge to the ser-
vice address that will be provided to you. Ensure that you enclose
the proof of purchase (till receipt) and information about what the
defect is and when it occurred.
You can download these instructions along with
many other manuals, product videos and software on
www.lidl-service.com.
Service
Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.)
E-Mail: kompernass@lidl.co.uk
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: kompernass@lidl.ie
IAN 285664
Importer
Please note that the following address is not the service address.
Please use the service address provided in the operating instructions.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
DE - 44867 BOCHUM
GERMANY
www.kompernass.com
■ 12 │ GB
│IE│
NI
SLB 1.2 D2
Indholdsfortegnelse
Introduktion ................................. 14
Om denne betjeningsvejledning ..........................14
Ophavsret ...........................................14
Ansvarsbegrænsning ..................................14
Informationer om varemærker ...........................14
Advarsler ...........................................14
Anvendelsesområde ...................................15
Sikkerhed ...................................15
Grundlæggende sikkerhedsanvisninger ....................15
Første brug .................................. 17
Kontrol af de leverede dele .............................17
Bortskaffelse af emballagen .............................17
Montering af fødder ...................................18
Krav til opstillingsstedet ................................18
Betjeningselementer .......................... 18
Betjening og funktion ......................... 19
Systemkrav ..........................................19
Tilslutning af højttalerne ................................19
Tænd/sluk og indstilling af lydstyrke ......................19
Tænd / sluk for belysningen .............................19
Tænd / sluk for bas- og diskantforstærkning ................20
Tilslutning af hovedtelefoner .............................20
Afhjælpning af fejl ............................ 21
Fejlårsager og afhjælpning af fejl ........................21
Rengøring ..................................22
Sikkerhedsanvisninger .................................22
Opbevaring/bortskaffelse ..................... 22
Opbevaring, når produktet ikke anvendes ..................22
Bortskaffelse af produktet ...............................22
Tillæg ...................................... 22
Tekniske data ........................................22
Info til EF-overensstemmelseserklæringen ...................23
Garanti for Kompernass Handels GmbH ...................23
Service .............................................24
Importør ............................................24
SLB 1.2 D2
DK
│
13 ■
Introduktion
Om denne betjeningsvejledning
Til lykke med købet af dit nye produkt.
Du har dermed valgt et produkt af høj kvalitet. Betjeningsvejledningen
er en del af dette produkt. Den indeholder vigtige informationer om
sikkerhed, anvendelse og bortskaffelse. Du bedes sætte dig ind i alle
produktets betjenings- og sikkerhedsanvisninger før brug. Brug kun
produktet som beskrevet og kun til de angivne anvendelsesområder.
Opbevar denne vejledning, så du altid kan finde den igen. Lad
vejledningen følge med produktet, hvis du giver det videre til andre.
Ophavsret
Denne dokumentation er ophavsretligt beskyttet.
Kopiering eller eftertryk – dette gælder også i uddrag – samt videregivelse af billederne – herunder også i ændret tilstand – er kun
tilladt med producentens skriftlige samtykke.
Ansvarsbegrænsning
Alle tekniske informationer, data og anvisninger for tilslutning og
betjening i denne betjeningsvejledning er i overensstemmelse med
de nyeste forhold på trykketidspunktet og tager hensyn til vores
hidtidige erfaringer og bedste viden. Der kan ikke stilles nogen form
for krav baseret på informationerne, billederne og beskrivelserne i
denne vejledning. Producenten påtager sig intet ansvar for skader,
der skyldes manglende overholdelse af vejledningen, anvendelse,
som ikke hører ind under anvendelsesområdet, forkerte reparationer,
ændringer, som er foretaget uden tilladelse samt anvendelse af ikketilladte reservedele.
Informationer om varemærker
- USB er et registreret varemærke for USB Implementers Forum, Inc.
Alle andre navne og produkter kan være varemærker eller registre-
rede varemærker, der tilhører deres respektive ejere.
Advarsler
I denne betjeningsvejledning anvendes følgende advarsler:
ADVARSEL
Advarselsinfo på dette faretrin markerer en mulig
farlig situation.
Hvis den farlige situation ikke undgås, kan det føre til personskader eller livsfarlige kvæstelser.
► Følg anvisningerne i denne advarselsinfo for at undgå, at
personer kommer til skade.
■ 14 │ DK
SLB 1.2 D2
Loading...