TRUE WIRELESS BLUETOOTH® STEREO SPEAKER SET SKBL 56 A1
TRUE WIRELESS BLUETOOTH®-STEREO-LAUTSPRECHER-SET
Bedienungsanleitung
IAN 282774
TRUE WIRELESS BLUETOOTH® STEREO SPEAKER SET
Operating instructions
GB / IE / NI Operating instructions Page 1
DE / AT / CH Bedienungsanleitung Seite 19
Before reading, unfold the page containing the illustrations and familiarise
yourself with all functions of the device.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen
Sie sich anschließend mit allen Funktionen des Gerätes vertraut.
A
2 x
B
2 x
SKBL 56 A1
GB│IE│NI
│
1 ■
Introduction ........................................ 2
Information about these operating instructions .......................2
Copyright ...................................................2
Notes on trademarks ..........................................2
Intended use .................................................2
Warnings ...................................................3
Safety ............................................3
Basic safety instructions ........................................4
Description of components ........................... 5
Use ............................................... 6
Unpacking ..................................................6
Check package contents .......................................6
Disposal of the packaging ......................................6
Charging the speaker ..........................................7
Handling and use ................................... 7
Switching the speakers on/off ...................................7
Operating the speakers in mono mode ............................8
Operating the speakers in stereo mode ............................9
Function of the buttons for music playback ....................... 11
Telephone functions ......................................... 11
AUX IN mode .............................................. 12
Automatic switch-off ......................................... 13
Troubleshooting ................................... 13
Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Storage when not in use ............................14
Disposal .......................................... 14
Appendix ......................................... 15
Technical data ............................................. 15
Notes on the EU Declaration of Conformity ....................... 15
Kompernass Handels GmbH warranty .......................... 16
Service ................................................... 17
Importer .................................................. 18
SKBL 56 A1
■ 2
│
GB│IE│NI
Introduction
Information about these operating instructions
Congratulations on the purchase of your new device.
You have selected a high-quality product. The operating instructions are part of
this product. They contain important information about safety, use and disposal.
Before using the product, please familiarise yourself with all operating and
safety instructions. Use the product only as described and for the range of
applications specified. Keep these operating instructions as a reference
and store them near the product. Please pass on all documentation incl. these
operating instructions to any future owner(s), if you sell this product or give it away.
Copyright
This documentation is protected by copyright.
Any copying or reproduction, including in the form of extracts, or any reproduction of images (even in a modified state), is permitted only with the written
authorisation of the manufacturer.
Notes on trademarks
USB® is a registered trademark of USB Implementers Forum, Inc.
The Bluetooth
®
logotype and Bluetooth
®
logo are registered trademarks
of Bluetooth SIG, Inc. (Special Interest Group). Any use of the trademarks by
Kompernaß Handels GmbH is made under the provision of a licence.
The SilverCrest trademark and the retail name are the property of their
respective owner.
All other names and products may be trademarks or registered trademarks
of their respective owner.
Intended use
This consumer electronics device is used to play back audio files which can
be transferred via Bluetooth
®
or 3.5-mm jack cable. You can use the speaker
as a hands-free kit to take calls using the integrated microphone if there is an
existing Bluetooth
®
connection. The device is not intended for any other
purpose, nor for use beyond the scope described.
SKBL 56 A1
GB│IE│NI
│
3 ■
The device is not intended for use in commercial or industrial environments.
The manufacturer accepts no responsibility for damage caused by failure to
observe these instructions, improper use or repairs, unauthorised modifications
or the use of unapproved replacement parts. The risk shall be borne solely
by the user.
Warnings
The following types of warning are used in these operating instructions:
DANGER
A warning at this hazard level indicates a potentially hazardous
situation.
Failure to avoid this hazardous situation could result in severe injuries or
even death.
► Follow the instructions in this warning notice to avoid the risk of serious
injuries or death.
CAUTION
A warning notice of this hazard level indicates a risk of
property damage.
Failure to avoid this situation could result in property damage.
► Follow the instructions in this warning notice to prevent material damage.
NOTE
► A note provides additional information that makes handling the device
easier for you.
Safety
This section contains important safety instructions for handling the device.
This device complies with statutory safety regulations. Improper use may
result in personal injury and property damage.
SKBL 56 A1
■ 4
│
GB│IE│NI
Basic safety instructions
To ensure safe operation of the device, follow the safety guidelines set out
below:
■ Check the device for visible external damage before use. Do not operate
a device that has been damaged or dropped.
■
DANGER! Do not allow children to play with the packaging material!
Keep all packaging materials away from children.
There is a risk of suffocation! This product contains small parts
that could be swallowed (removable rubber feet). Keep it out of
the hands of children.
■ This device may be used by children aged 8 years and above and by
persons with limited physical, sensory or mental capabilities, or lack of
experience and knowledge, provided that they are under supervision or
have been told how to use the device safely and are aware of the potential
risks. Children must not play with the device. Cleaning and user maintenance
tasks may not be carried out by children unless they are supervised.
■ If the charger cable or connections are damaged, have them replaced
by an authorised specialist or the customer service department.
■ Protect the charger cable from hot surfaces and sharp edges.
■ Ensure that the charger cable is not stretched tightly or kinked.
■ Always place the device on a stable and level surface. It can be damaged
if dropped.
■ Do not expose the device to direct sunlight or high temperatures. Otherwise
it may overheat and be irreparably damaged.
■
DANGER! Do not operate the device close to naked flames (e.g.
candles) and do not place burning candles on or next to the device. This
will help to prevent fires.
■ The device may heat up while it is charging. Place the speaker in a well-
ventilated location during the charging process and do not cover it.
■ The device is not designed for use in rooms with high temperatures or
humidity (e.g. bathrooms) or where there is excessive dust.
■ Protect the device from penetration by moisture and liquids. Never submerge
the device in water or place objects filled with liquids (e.g. vases) next to
the device.
SKBL 56 A1
GB│IE│NI
│
5 ■
■ Switch the device off immediately and disconnect any connected cables
from the device if you hear any unusual noises, smell fumes or notice any
smoke. Have the device checked by a qualified specialist before using it
again.
■ All repairs must be carried out by authorised specialist companies or by
the customer service department. Improper repairs may put the user at
risk. It will also invalidate any warranty claims. This device may not be
opened by the user.
■ The device has an integrated lithium-ion battery. Mishandling the lithium-ion
batteries can cause fires, explosions, leakage of dangerous chemicals or
other hazards! Do not throw the device into an open fire.
■ Do not make any unauthorised modifications or alterations to the device.
This device may not be opened by the user.
■ Comply with all restrictions or prohibitions on use for battery-powered
devices in locations with specific hazard risks, e.g. petrol stations, aeroplanes, hospitals, etc.
Description of components
(See fold-out page for illustrations)
Figure A:
button
button
button
3.5-mm jack (AUX IN)
Micro-USB charging socket (POWER INPUT)
Rubber foot
Microphone
Operating/charging LED
Figure B:
Charging cable (USB to micro-USB)
3.5-mm jack cable
Operating instructions (symbol image)
SKBL 56 A1
■ 6
│
GB│IE│NI
Use
Unpacking
♦ Remove all parts and the operating instructions from the box.
♦ Remove all packaging material.
Check package contents
(See fold-out page for illustrations)
The product includes the following components:
▯ 2 x True Wireless Bluetooth
®
Stereo Speaker SKBL 56 A1
▯ 2 x charging cables (USB to micro-USB)
▯ 3.5-mm jack cable (3.5 mm to 3.5 mm)
▯ These operating instructions
NOTE
► Check the package for completeness and signs of visible damage.
► If the delivery is incomplete or damage has occurred as a result of
defective packaging or during transport, contact the service hotline
(see section Service).
Disposal of the packaging
The packaging protects the device from damage during transport. The packaging materials have been selected for their environmental friendliness and
ease of disposal and are therefore recyclable.
Returning the packaging to the material cycle conserves raw
materials and reduces the amount of waste that is generated.
Dispose of packaging materials that are no longer needed in
accordance with applicable local regulations.
NOTE
► If possible, keep the original device packaging for the entire duration
of the warranty period so that the device can be packaged properly
for return shipment in the event of a warranty claim.
SKBL 56 A1
GB│IE│NI
│
7 ■
Charging the speaker
CAUTION
► Charge the speakers only in dry interior spaces.
Before using the speakers, the integrated batteries must be completely
charged.
♦ Make sure that the speakers are switched off. If a device is switched
on, the operating/charging LED
lights up. Press the
button for approx. 2 seconds to switch off a device.
♦ Connect the USB plugs on the charger cables
to a PC or to a USB
power supply.
♦ Connect the micro-USB plugs on the charger cables
to the mi-
cro-USB charging sockets (POWER INPUT)
on the speakers.
NOTE
► The operating/charging LED
lights up orange during recharging.
When the battery is fully charged, the charging LED turns off.
NOTE
►
Charging takes about 3 hours at a charging current of 500 mA. When
the battery is fully charged, you can play back music for about 4 hours
at a medium volume. The playback time may vary depending on usage
(volume).
► When the battery is empty, you will hear two beeps at intervals of just
a few seconds, and the operating/charging LED
flashes orange
twice every 15 seconds. The device then switches off automatically.
Handling and use
This section provides you with important information on handling and using
the device.
Switching the speakers on/off
♦ Press and hold the button for about 2 seconds to turn a
speaker on and activate the Bluetooth
®
function. You will hear a beep
and the operating/charging LED
flashes alternatively orange and
blue.
SKBL 56 A1
■ 8
│
GB│IE│NI
♦ Press and hold the
button for about 2 seconds to turn one
speaker off and deactivate the Bluetooth
®
function. You will hear a
beep. The operating/charging LED
will go out.
NOTE
► If the two speakers are coupled with each other via Bluetooth
®
, then
both speakers will switch off as soon as you switch off one speaker.
Operating the speakers in mono mode
When supplied, the speakers are preset in mono mode by default. This means
you can pair each speaker with a one playback device. Before you can use
the speakers, you must pair them with a compatible Bluetooth
®
device.
♦ Make sure that the speakers are switched off and the Bluetooth
®
device is switched on.
♦ Set the Bluetooth
®
device so that it scans for other Bluetooth
®
devices. A detailed description of how to do this can be found in the
operating instructions for your Bluetooth
®
device.
♦ Press and hold the
button for about 2 seconds to turn a
speaker on and activate the Bluetooth
®
function. You will hear a beep
and the operating/charging LED
flashes alternatively orange and blue.
NOTE
► Make sure that the speakers are no more than 10 metres from the
Bluetooth
®
device and each other. Make sure that there are no
barriers or electronic devices placed between them.
♦ Select SKBL 56 A1 from the list of found devices on your Bluetooth
®
device to pair the two devices. You will hear a short beep when the
connection has been successfully established. The operating/charging
LED
flashes twice every 3 seconds.
♦ If you want to operate the second speaker in mono mode with a different
Bluetooth
®
playback device, carry out the process described above
with the second speaker. Make sure you do not switch on the second
speaker until you have paired the first speaker with a Bluetooth
®
playback device.
SKBL 56 A1
GB│IE│NI
│
9 ■
You can now use the speaker to listen to your favourite tunes wirelessly.
NOTE
► The next time you turn on the speakers they will connect automatically
to the last-connected Bluetooth
®
device. If your Bluetooth
®
device
does not automatically reconnect, you will have to re-establish the
connection manually. A detailed description of how to do this can be
found in the operating instructions for your Bluetooth
®
device.
► If you want to connect the speaker to another Bluetooth
®
device,
you must first unpair the current Bluetooth
®
device. To do this, hold
down the
button and the button ( ) of the
affected speaker for about 2 seconds until you hear a beep. Alternatively, you can terminate the connection on your Bluetooth
®
device.
In this case, you will also hear a beep.
Operating the speakers in stereo mode
You can also operate both speakers at the same time from the same Bluetooth
®
device. Then each speaker will play back one audio channel.
♦ Make sure that the speakers are switched off and the Bluetooth
®
device is switched on.
♦ Set the Bluetooth
®
device so that it scans for other Bluetooth
®
devices. A detailed description of how to do this can be found in the
operating instructions for your Bluetooth
®
device.
♦ Press and hold the
button for about 2 seconds to turn a
speaker on and activate the Bluetooth
®
function. You will hear a beep
and the operating/charging LED
flashes alternatively orange and
blue. If the speaker connects automatically to an already paired
Bluetooth
®
playback device, then terminate this connection. To do
this, hold down the
button and the button ( )
of the affected speaker for about 2 seconds until you hear a beep.
Loading...