Congratulations on the purchase of your new appliance!
You have clearly decided in favour of a modern and high-quality product. These
operating instructions are a part of this product. They contain important information in regard to safety, use and disposal. Before using the product, familiarise
yourself with all of these operating and safety instructions. Use the product only
as described and only for the specifi ed areas of application. In addition, pass
these documents on, together with the product, to any future owner.
Copyright
This documentation is copyright protected.
All reproductions or duplications, also as extracts, as well as representations
of the illustrations, even in an altered state, are only permitted with the written
approval of the manufacturer.
Limited liability
All technical information, data and instructions for installation, connection and
operation contained in this operating manual correspond to the latest available
at the time of printing and, to the best of our knowledge, take into account our
previous experience and know-how.
No claims can be derived from the details, illustrations and descriptions in these
instructions.
The manufacturer assumes no responsibility for damage caused by failure to
observe the instructions, improper use, incompetent repairs, making unauthorised
modifi cations or for using unapproved replacement parts.
Warning symbols used
In these operating instructions the following warnings are used:
DANGER
A warning at this risk level indicates a threateningly dangerous
situation.
If the dangerous situation is not avoided, it could result in death or serious injury.
► Follow the instructions given in this warning to avoid the risk of death or
severe personal injury.
2
SFS 150 B3
IMPORTANT
A warning at this risk level indicates possible property damage.
If the situation is not avoided it could lead to property damage.
► Follow the instructions in this warning to avoid property damage.
NOTICE
A notice indicates additional information that assists in the handling of the
►
appliance.
Intended use
This plastic fi lm sealer is intended for the occasional vacuum-packing of food in
typical household quantities and only for private household use. This appliance
is not intended for commercial or industrial applications or for continuous operation.
This appliance is not intended for any other use or for uses beyond those mentioned. Claims of any kind for damage resulting from unintended use will not be
accepted. The user alone bears liability.
Items delivered and transport inspection
The appliance is delivered with the following components as standard:
▯ Vacuum Sealer SFS 150 B3
▯ 1 Tube fi lm made of PE-HD (Polyethylene of high density)
▯ This operating manual
GB
IE
CY
Unpacking
SFS 150 B3
NOTICE
Check the contents to make sure everything is there and for visible damage.
►
► If the contents are not complete or are damaged due to defective packaging
or through transportation, contact the service hotline (see chapter Service).
♦ Remove the appliance, the tube fi lm and the operating instructions from the
carton.
♦ Remove all packing material.
DANGER
► Packaging material should not be used as a play thing by children. There is
a risk of suff ocation!
3
GB
IE
CY
Disposal of the packaging
The packaging protects the appliance from transport damage. The packaging
materials are selected from the point of view of their environmental friendliness
and disposal technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material and
reduces the amount of waste generated. Dispose of packaging material that is
no longer needed as per the regionally established regulations.
NOTICE
If possible preserve the appliance's original packaging during the warranty
►
period so that in the case of a warranty claim you can package the appliance
properly for return.
Appliance description
Collection container
Suction connector
Sealing wire
Cutting device
Roll storage compartment
Guide rail
Indication lamp (red)
Lid release
Sealing button
Technical data
Operational voltage230 - 240 V ∼, 50 Hz
Power consumption 150 W
Protection class
Recommended operating time20 Seconds
Recommended pause time80 Seconds
4
II /
SFS 150 B3
Safety instructions
This section provides you with important safety information regarding
handling of the appliance. The appliance complies with the statutory
safety regulations. Incorrect usage can lead to personal injury and
property damage.
RISK OF ELECTRIC SHOCK
■ Before use, check the appliance for externally visible damage.
Never operate an appliance that is damaged.
■ If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualifi ed persons
in order to avoid a hazard.
■ NEVER use the appliance with a defective power cable.
■ Do not use extension cables or power socket strips that do not
meet the required safety standards.
■ Never open the appliance housing!
■ Remove the plug from the mains power socket before beginning
to clean the appliance.
■ Ensure that moisture cannot permeate into the appliance during
cleaning.
GB
IE
CY
RISK OF INJURY!
■ All repairs must be carried out by authorised specialist com-
panies or the Customer Service department. Improper repairs
may result in a risk of injury to the user or damage to the appliance. Warranty claims also become void.
■ The mains power socket must be easily accessible, so that the
power cable can be easily disconnected in the event of an
emergency.
SFS 150 B3
5
GB
IE
CY
RISK OF INJURY!
■ Cleaning and user maintenance must not be carried out by
children, unless they are aged 8 or over and are supervised.
■ The appliance and its connecting cable must be kept away
from children younger than 8 years old.
■ This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
■ Children must not play with the appliance.
■ Children should be supervised to ensure that they do not play
with the appliance.
■ Do not leave the appliance unsupervised when it is ready for
use. To avoid it being switched on accidentally, always unplug
the appliance after use or during breaks.
CAUTION – PROPERTY DAMAGE!
■ This appliance is not suitable for continuous use over long periods.
Let the appliance cool down for a minimum of 80 seconds after
each vacuum process. The appliance could otherwise be irreparably damaged!
■ Do not use an external timing switch or a separate remote
control system to operate the appliance.
6
SFS 150 B3
Setting up and connecting to the power supply
Requirements on the installation site
For safe and fl awless operation of the appliance, the installation site must comply
with the following requirements:
■ When setting it up, place the appliance on a fi rm, fl at and horizontal
surface.
■ Do not operate the appliance in a hot, wet or very humid environment or
close to combustible material.
■ The mains power socket must be easily accessible, so that the power cable
can be easily disconnected in the event of an emergency.
Electrical connection
IMPORTANT
Before you connect the appliance, compare the connection data (voltage
►
and frequency) on the data plate with that of your mains power network.
This data must match in order to avoid any damage to the appliance.
► Ensure that the power cable is undamaged and is not routed over hot
surfaces and/or sharp edges.
► Ensure that the power cable is not taut or kinked.
► Do not let the power cable hang over edges (trip wire eff ect).
♦ Insert the plug into a mains power socket.
GB
IE
CY
Handling and operation
In this chapter you receive important information for the handling and operation
of the appliance.
Inserting the tube fi lm
♦ Open the roll storage compartment and insert a roll of tubular fi lm.
♦ Fold the guide rail of the cutting device to the rear and pull a piece
of tube fi lm through between the guide rail and the appliance lid.
♦ Close the roll storage compartment and fold the guide rail of the
cutting device back down.
SFS 150 B3
7
GB
IE
CY
Sealing the tube fi lm
IMPORTANT
For sealing use only fi lm made from HDPE (high density polyethylene) and
►
LDPE (low density polyethylene).
► The foil thickness must be between 30-50 μ (0.03 - 0.05 mm). Otherwise,
the sealing seam will not be tight and the appliance could be damaged.
You can identify fi lms of this kind from the markings on the packaging. The
quality of the seal varies depending on the type and thickness of the fi lm.
► Do not heat the supplied fi lm, for example in a water-bath or similar. It is
construed for temperatures up to a maximum of 60°C.
♦ Pull out the desired length of fi lm under the guide rail of the cutting
device .
♦ Press down on the cutting device and then slide it to the left or right over
the bag width. You get a clean cut with straight-cut corners.
♦ Open the appliance lid by pressing the lid releases to the top.
8
SFS 150 B3
♦ Place a bag opening on the sealing wire . To ensure that the bag is fi xed
in place and does not slip, place the end of the bag below the suction connectors . For this you can lift them slightly. The bag needs to extend up to
the marking “Seal”, which is marked on the appliance.
NOTICE
► The bag opening must lie smoothly on the sealing wire . Otherwise, the
sealing does not function properly.
♦ Close the appliance lid. When doing so, ensure that both corners engage.
If necessary, press the corners down lightly until the device lid is engaged
properly. If the device lid is not properly engaged, the sealing process cannot be started!
♦ Press the sealing button with both hands. The indication lamp illuminates.
GB
IE
CY
SFS 150 B3
♦ Hold the sealing button pressed down until the indication lamp
extinguishes.
9
GB
IE
CY
IMPORTANT
If the indication lamp does not extinguish after 10 seconds
at the most, the appliance is defective!
► Immediately remove the plug from the mains power socket. Do not attempt
to repair the appliance yourself. In this case, contact Customer Services.
♦ Open the appliance lid and remove the bag. This is now sealed at one end.
NOTICE
Check to ensure that the sealing seam is in order. A correct sealing seam
►
should be a smooth, straight strip without folds.
♦ Fill the bag. You must leave at least 6 cm free to the bag-edge that is to be
sealed.
IMPORTANT
Fill the bags in such a way that, under no circumstances, food remnants or
►
fl uids can run out of the bag when sealing it and permeate into the appliance.
♦ If you do not want to vacuum seal the bag you can now seal the open side.
Vacuuming the tube fi lm
When sealing, you can at the same time extract the air from the bag (vacuuming):
IMPORTANT
Do NOT vacuum bags in which there are liquids. They will permeate into
►
the appliance and damage it.
♦ Place the open end of the bag around the suction connectors . For
this you can lift them slightly. The bag needs to extend up to the marking
“Vacuum”, which is marked on the appliance.
10
SFS 150 B3
NOTICE
The bag opening must lie smoothly against the suction connectors and
►
the sealing wire
properly.
♦ Close the appliance lid and then press it down fi rmly on both sides and with
both hands. Thereby, do NOT press the sealing button . The air is now
being sucked from the bag.
♦ As soon as the air has been sucked from the bag, press and hold the sealing
button with both hands, as already described, and seal the bag. Vacuuming
will not stop automatically as long as the air is still being extracted! The indication lamp will illuminate during the sealing process.
. If it does not, the vacuuming and sealing will not work
GB
IE
CY
Cleaning
SFS 150 B3
DANGER
Risk of potentially fatal electrical shock!
► Remove the plug from the mains power socket before beginning to clean
the appliance.
► Ensure that moisture cannot permeate into the appliance during cleaning.
IMPORTANT
Possible damage to the appliance.
► Do not use aggressive or abrasive cleaners as they may damage the
surface of the housing.
► Do not use hard or sharp objects to remove the glue residues from the
sealing wire . If you do, the sealing wire or the isolation could be
damaged.
11
Loading...
+ 32 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.