Siemens 80 User Manual
Specifications and Main Features
- System Type: 40/80 Mixed-Use Key Telephone System
- Software Feature Package: Feature Package VI (FP VI)
- System Design: Maximum of 40 stations and 96 Central Office Lines.
- Features:
- Disable Outgoing Access: Attendant disable outgoing access
- Actual Call Forwarding Target: Actual call forwarding target off-net stations(mobile, international telephone networks)
- Call Forwarding: Preset Call forwarding for telecom operators mobile phones where none of them call center assigns
- Tone option: Calling station has an option to change tones registered with them already
- CO Line Ring Assignment: Registration of radio frequency emissions and control over operational and non operational registers of CO lines
- Enable/Disable Conference: Allowing or forbidding capabilities for attendees invited to attend
- Class of Service (Cos) Day/Night: Controls over network essential and non-essential regimes day and night
- Do Not Disturb Once:DISALLOWANCE OVER TELEPHONE CALLS ONLY ONCE.
- Override Executive: This telephone system is able to interrupt a call that is underway and overload the system with another call.
- Speed Dial In (Executive): Immediate connections to systems.
- Expanded Station Speed Dial (max 1280 entries): An array of 1280 maximum indent entries.
- Intercom Flash: Sending a flash that identifies over other bits.
- Hunt Groups: Model: 8x8 Standard configuration for locating aiding devices in groups or sections
- Most Economical Routing Enhancements: Minimizing overhead2 costs through efficient routing increases
- Universal Call Distribution Enhancements: Call enabling amplifiers designed as coaxial distributions shaped into 8 subgroups each equipped with 8 associated devices
- Voice Mail Integration Enhancements: Voice messaging system that alerts intended receivers of messages through electronic means
- Connections Usrs232C: Connecting and programming computers with users.
- External Paging Aux: Speakers or signal monitors intended for indicating operational situations when certain functions are performed.
- Background And Hold Music: Music is played in the background while an audio clip is used on hold instead of a voiceover.
- Backup battery: Electrochemical energy storage devices which reroute operations within a system or apparatus.
- Transfer Emergency: Passage to different areas during extream situations.
- Automatic Night Mode: Night mode is done automatically for the device.
- Call transfer and Call Pick Up Group: Relaying gained points for stations to other designated points to groups.
- Services Directory: Availability of records of all operators and the services provided by them for internal users only
- Restriction of Paging Access: Limiting the ability to communicate with other people
- Park Personal And Conference With Personal Park: Synchronized interactive and multifunctional user management and billing control systems designed for networked telephony devices.
- SLT Compatibility: Other traditional single line telephones are also applicable and can be compatible
- System Speed Dial: Internal contacts stored in a datable that are speed dialed.
- Physical Properties and Weight: N/A
- Power Requirements: Н/А
Frequently Asked Questions
Q: What kind of system is the 40/80 Hybrid Key Telephone System?
A: It is a hybrid key telephone system with a capacity of 40 stations and 96 CO lines.
Q: What is the functioning of the feature called Station Off-Net Forward?
A: The feature called Station Off-Net Forward allows intercom and transferred CO line calls from the station to be forwarded to a location outside the network.
Q: Does the system allow use of more than one feature at a time?
A: Yes, the system permits use of various features concurrently such as conference calls, speed dialing and automatic privacy.
Q: Out of all the speed dials, what is the upper limit that can be included?
A: An expanded station speed dial of 1280 entries is permitted by the system.
Q: Can these CO calls be diverted at night when they come in?
A: Yes, there is such a function in the system as Automatic Night Mode which handles incoming calls after working hours.
Q: what are the options of programming the system?
A: Programming of the system may be done through the Enhanced or Executive Key Telephone using special keys in some program mode or through data terminal to the RS-232C port.
Q: Is there a option to view missed calls on the system?
A: First of all yes, the Message Waiting feature is active within the system. This feature provides warning on the new calls or messages that are received but not yet answered.
User Manual
Loading...