Samsung UN60F6300AF, UN46F6300AF, UN50F6300AF, UN65F6300AF Manual

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung.

Country	Customer Care	Web Site	Address
	Center
CANADA	1-800-SAMSUNG	www.samsung.com/ca (English)	Samsung Electronics Canada Inc., Customer
	(726-7864)	www.samsung.com/ca_fr (French)	Service 55 Standish Court Mississauga,
			Ontario L5R 4B2 Canada
U.S.A	1-800-SAMSUNG	www.samsung.com	Samsung Electronics America, Inc. 85
	(726-7864)		Challenger Road Ridgefi eld Park, NJ 07660

© 2013 Samsung Electronics Co., Ltd. All rights reserved.	BN68-04792B-03

LED TV

user manual

Thank you for purchasing this Samsung product. To receive more complete service, please register your product at

www.samsung.com/register

Model _____________ Serial No. _____________

If you have any questions, please call us at 1-800-SAMSUNG (1-800-726-7864) for assistance.

Important Safety Instructions

Warning! Important Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.

This symbol indicates that important literature concerning operation and maintenance has been included with this product.

•The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.

−− Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided. −− Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.

−− Do not place vessels (vases etc.) containing water on this apparatus, as this can result in a fire or electric shock.

•Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.

•This apparatus uses batteries. In your community, there might be environmental regulations that require you to dispose of these batteries properly. Please contact your local authorities for disposal or recycling information.

•Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.

•Power-supply cords should be placed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at the plug end, at wall outlets, and the point where they exit from the appliance.

•To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

•Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local electrical supply.

•Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.

•To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.

•Make sure to plug the power cord in until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on the power cord's plug. Never unplug by pulling on the power cord. Do not touch the power cord with wet hands.

•If this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service center.

•Be sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time (especially when children, elderly or disabled people will be left alone in the house).

−− Accumulated dust can cause an electric shock, an electric leakage or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate.

•Be sure to contact an authorized service center for information if you intend to install your TV in a location with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such in an airport, a train station, etc. Failing to do so may lead to serious damage of your TV.

•Use only a properly grounded plug and wall outlet.

−− An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

•To turn this apparatus off completely, you must disconnect it from the wall outlet. Consequently, the wall outlet and power plug must be readily accessible at all times.

•Do not allow children to hang onto the product.

•Store the accessories (battery, etc.) in a location safely out of the reach of children.

•Do not install the product in an unstable location such as a shaky self, a slanted floor or a location exposed to vibration.

•Do not drop or apply any shock to the product. If the product is damaged, disconnect the power cord and contact a service center.

•To clean this apparatus, unplug the power cord from the wall outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergent. These chemicals can damage the appearance of the TV or erase the printing on the product.

•Do not expose this apparatus to dripping or splashing.

•Do not dispose of batteries in fire.

•Do not short-circuit, disassemble or overheat the batteries.

•There is danger of an explosion if you replace the batteries used in the remote with the wrong type of battery. Replace only with the same or equivalent type.

•WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

English - 2

Contents

Basic Features

5 Using the Remote Control

6 Inserting the Batteries (AAA X 2)

7 Turning on the TV

8 Switching Between Video Sources

9 Universal Remote Setup

9 Add the External Device

Viewing the e-Manual

10 Viewing the e-Manual

10Scrolling a Page

10Using the Top Icons

10Returning to the Home Page

10Searching the Index

11Searching Pages

11 Closing the e-Manual

11 Jumping to a Menu Item

11 Updating the e-Manual

Network Configuration

12 Connecting to a Network

12Network Connection - Wireless

12Wireless Network Precautions

12Network Security Protocols

13Network Connection - Wired

Troubleshooting and Other

Information

14 What is Remote Support?

15 Troubleshooting

16 Mounting the TV on the Wall Using the Wall Mount Kit (Optional)

18 Assembling the Cable manager

18 Eco Sensor and Screen Brightness

19 Maintenance

19 Providing Proper Ventilation for Your TV

20 Securing the TV to the Wall

Specifications

21 Specifications

22 Dimensions

22 Licenses

Guides

23 Warranty Information

English - 3

Figures and illustrations in this User Manual are provided for reference only and may differ from the actual product appearance. Product design and specifications may change without notice.

Features of your new TV

•• SMART HUB:

This TV features Smart Hub, a multi-purpose entertainment and family center. With Smart Hub, you can surf the web, download applications, and stay in touch with family and friends through social networking services. In addition, you can view or play photo, video, and music files stored on external storage devices.

Press the ™ button to launch Smart Hub. Choose a service using the icons displayed in the top part of the screen.

Smart Hub services and functionality include:

Social: Watch the latest YouTube videos and you and your friends' video posts on Facebook and Twitter. You can also make video calls to friends by connecting the TV to a camera (sold separately).

Apps: Samsung Apps offers an extensive collection of free and paid news, sports, weather, and gaming content you can directly download to and enjoy on your TV.

On TV: Check a listing of programs that are currently airing or are scheduled to air.

Photos, Videos & Music: Play back photo, video, and music files from an external storage device.

•• Anynet+ (HDMI-CEC): This allows you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote.

•• e-Manual: Provides a detailed, on-screen user's manual built into your TV.

•• SMART Interaction: Using this function, you can access and control menu options and functions using motions. To use the Smart Interaction Feature, connect the SMART TV camera (sold separately) to your TV.

•• Device Manager: Use the TV features with a USB keyboard and mouse.

•• Screen Mirroring: Displays mobile device screens on your TV using a wireless connection.

English - 4

Using the Remote Control

Learn where the function buttons are on your remote. Especially note these: SOURCE, MUTE, VOL, CH,

MENU, TOOLS, E, INFO, CH LIST, RETURN, and EXIT.

This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.

Turns the TV on and off.

Turn on the backlight for the buttons. The backlight lasts for only a few seconds.

Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to On will reduce the battery usage time.)

Gives direct access to channels.

Displays and selects the available video sources.

STB: Turn on and off the satellite or cable set-top box connected to the TV.

STB GUIDE: Displays the STB's EPG (Electronic Program Guide).

STB MENU: Opens the STB's OSD (Menu).

These buttons are only available when the universal remote control is set and TV turns on.

Press to select additional digital channels being broadcast by the same digital station. For example, to select channel ‘54-3’, press ‘54’, then press ‘-’ and ‘3’.

Adjusts the volume.

Displays channel lists on the screen. Opens the OSD (Menu).

Quickly selects frequently used functions.

Moves the cursor, selects the on-screen menu items, and changes the values seen on the TV's menu.

Returns to the previous channel. Cuts off the sound temporarily.

Changes channels.

Brings up Smart Hub applications. See the e-Manual chapter, Smart TV Features >

Smart Hub.

Displays the EPG (Electronic Program

Guide).

Displays information on the TV screen.

Returns to the previous menu.										Exits the menu.
			B		C	D
Use these buttons according to the										SEARCH: Run search function. See the
directions on the TV's screen.
										e-Manual chapter, Smart TV Features >
										Search.
										STATUS: The notification banner is
										shown at the top of the screen. See the
										e-Manual chapter, Smart TV Features >
										Notification.
Use these buttons in a specific feature.										MORE: Displays a virtual remote control
										on the screen. See the e-Manual chapter,
Use these buttons according to the
										Controlling the TV > Using the Virtual
directions on the TV's screen.										Remote Control.
										E-MANUAL: Displays the e-Manual.
										RECOMMENDED: Displays a
										list of scheduled-to-air program
										recommendations. See the e-Manual
										chapter, Smart TV Features > On TV.
										CC: Displays digital subtitles. See the
										e-Manual chapter, TV Viewing > Subtitles.

English - 5

Inserting the Batteries (AAA X 2)

Match the polarity of the batteries to the symbols in the battery compartment.

NOTE

−− Use the remote control within 23 feet of the TV.

−− Bright light may affect the performance of the remote control. Avoid using when near special fluorescent lights or neon signs.

−− The color and shape may vary depending on the model.

English - 6

Turning on the TV

Turn on the TV using the P button on the remote control or TV panel.The product color and shape may vary depending on the model.

The first time you turn on your TV, it will immediately start the initial setup.

The TV’s Controller, a small joy stick like button on the rear right side of the TV, lets you control the TV without the remote control.

	Open Smart Hub.
Open the menu.			Select a source.
		Turn off the TV.

TV Controller

The control stick is located at the lower-left corner on the back of the TV.

Remote control sensor

When you use the Remote control, the standby LED does not respond, except when you press the P button.

Caution of the cover-jack (32 - 50 inches models only)

CAUTION

The cover-jack is for use by qualified service personnel only.

To reduce the risk of electric shock or fire hazard, do not use the cover jack, unless you are qualified to do so.

TV Rear Panel

Cover-jack

The rear panel may differ depending on the model.

English - 7

Switching Between Video Sources

Press the SOURCE button to switch between devices connected to the TV.

For example, to switch to a game console connected to the second HDMI connector, press the SOURCE button. From the Source list, select HDMI2. The connector names may vary depending on the product.

Select Tools at the upper-right corner of the source screen to access the following functions.

•• Edit Name: Lets you associate a device name to an input source. You can select the following device names in the Edit Name option:

VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI Devices / TV / IPTV / Blu-ray / HD DVD / DMA

To associate a device name to an input source follow these steps:

1.Select Tools in the upper right corner of the source screen.

2.Select Edit Name.

3.Find the input source you want in the Source list (HDMI1, HDMI2, Component, etc.).

4.Select the blank field next to the input.

5.In the device name list that appears, select the name of the device attached to the input. When you view the Source list, the device name and the input jack will be displayed together.

−− If you have connected a PC to the HDMI IN 4 (DVI) port with an HDMI cable, select PC from the device name list.

−− If you have connected a PC to the HDMI IN 4 (DVI) port with an HDMI to DVI cable, select DVI PC from the device name list.

−− If you connected an AV device to the HDMI IN 4 (DVI) port with an HDMI to DVI cable, select DVI Devices from the device name list.

•• Information: View detailed information about the connected devices.

•• Refresh: Select if a connected device does not appear in the list. If the list does not show the device after selecting Refresh, check the status of the TV-to-device connection.

•• Remove USB: Remove the USB device from the list safely. This function is only available when the USB device selected.

Universal Remote Setup: Use to configure universal remote control settings. Using the universal remote control, you can control external devices connected to the TV, such as a set-top box, Blu-ray player, and AV receiver.

English - 8

Universal Remote Setup

This TV has a universal remote control feature that lets you control cable boxes, Blu-ray players, home theaters, and other third-party external devices connected to the TV using the TV's remote control.

2 inches

Keep a distance of 2 inches at least between the IR Extender and the external device, as the illustration shows. Face the IR Extender toward the external device’s remote control signal receiver. Note that it should be no obstacle between IR Extender and external device. The presence of an obstacle will interfere with the transmission of the remote control signal.

Add the External Device

1.Turn on the external device you wish to set up universal remote function for and then press the SOURCE to bring up the Source screen.

2.Select Universal Remote Setup from the top of the screen. This initiates the universal remote setup process.

3.Follow the on-screen instruction and set up the universal remote control. If it does not work, set up the remote control by entering the model number manually.

English - 9

Viewing the e-Manual

The embedded e-manual contains information about your TV's key features.

Navigate to the screen menu and select e-Manual (Support > e-Manual (Troubleshooting)).

1.Select a category from the left side of the screen.

2.Select an item. The e-Manual will open on the page containing the selected information.

Words in blue refer to screen menu options and words in light blue refer to remote control buttons.

Arrows are used to indicate the menu path. (Example: Screen Menu > Support > e-Manual (Troubleshooting))

Scrolling a Page

To scroll a page, use of one of the following methods:

••	Place the focus on the	or	button on the scroll bar at the right edge of the screen, and then press
	the E button.
••	Place the focus on the	or	button at the right edge of the screen, press the up or down arrow
	button on the remote.

Using the Top Icons

Use the Back, Forward, and Opened pages icons on the top left of the screen to navigate through pages. These icons are available after you have viewed two or more pages.

Returning to the Home Page

To return to the home page, press the a button or select on the top right of the screen.

Searching the Index

Press the b button or select on the top right of the screen to display the index. Select a term to display the page containing the term.

English - 10

Searching Pages

Press the { button or select on the top right of the screen, and enter search criteria. Select a page from the list of search results to display it.

Closing the e-Manual

To close the e-Manual, press the EXIT button or select at the upper-right corner of the screen.

Jumping to a Menu Item

To jump directly to the menu item that is described in the current section, select . It is possible to jump from a menu item directly to the related section in the e-Manual. On the screen menu, press the E-MANUAL button that appears on the screen.

This feature may not be available, depending on the menu.

Picture

Picture Mode		Standard
•	Backlight	14	E-MANUAL
•	Contrast	100
•	Brightness	45
•	Sharpness	50	Try Now
•	Color	50
•	Tint (G/R) G50	R50

Updating the e-Manual

Press the ™ button and select Apps, and then select More Apps. The e-Manual can be updated in the same way with an application update.

On the More Apps screen, select Update Apps, and then select e-Manual from the list. The e-Manual starts updating to the latest version. However, Update Apps appears on the screen only when the update is required.

English - 11

Connecting to a Network

Connecting the TV to a network gives you access to online services such as Smart Hub and lets you update the TV's software online directly from Samsung.com.

Network Connection - Wireless

Connect the TV to the Internet using a standard wireless router or modem.

Wireless IP Router or Modem that has a DHCP Server

The LAN Port on the Wall

LAN Cable (Not Supplied)

Wireless Network Precautions

•• This TV supports the IEEE 802.11a/b/g /n communication protocols. Samsung recommends using IEEE 802.11n. Otherwise, when you play video over a network connection, the video may not play smoothly.

•• To use a wireless network, the TV must be connected to a wireless router or modem. If the wireless router supports DHCP, the TV can use a DHCP or static IP address to connect to the wireless network.

•• Select a channel that is not currently in use for the wireless router. If the channel set for the wireless router is currently being used by another device, the result is usually interference and/or a communications failure.

•• Most wireless networks have an optional security system. To enable a wireless network's security system, you need to create a security key using characters and numbers, and then enter that key into the router through its menu. You then must enter this security key into any other devices you want to connect to the wireless network.

Network Security Protocols

The TV only supports the following wireless network security protocols:

•• Authentication Modes: WEP, WPAPSK, WPA2PSK

•• Encryption Types: WEP, TKIP, AES

In compliance with the newest Wi-Fi certification specifications, Samsung TVs do not support WEP or TKIP security encryption in networks running in the 802.11n mode.

If the wireless router supports WPS (Wi-Fi Protected Setup), you can connect the TV to your network using PBC (Push Button Configuration) or a PIN (Personal Identification Number). WPS automatically configures the SSID and WPA key settings.

Your Smart TV cannot connect to uncertified wireless routers.

English - 12

Network Connection - Wired

There are three main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated below:

	TV Rear Panel
The Modem Port on the Wall	External Modem
(ADSL / VDSL / Cable TV)
Modem Cable (Not Supplied)	LAN Cable (Not Supplied)

			TV Rear Panel
	The Modem Port on the Wall	External Modem	IP Router that has a
	(ADSL / VDSL / Cable TV)
			DHCP Server
	Modem Cable	LAN Cable	LAN Cable
	(Not Supplied)	(Not Supplied)	(Not Supplied)

TV Rear Panel

The LAN Port on the Wall

LAN Cable (Not Supplied)

The TV does not support network speeds less than or equal to 10Mbps.Use Cat 7 cable for the connection.

English - 13

What is Remote Support?

Samsung Remote Support service offers you one-on-one support with a Samsung Technician who can remotely.

•• Diagnose your TV

•• Adjust the TV settings for you

•• Perform a factory reset on your TV

•• Install recommended firmware updates

How Does it Work?

Having a Samsung Tech remotely service your TV is easy.

1. Call the Samsung	2. Open the menu	3. Select Remote	4. The agent will then
Contact Center	on your TV and	Management and	access your TV.
and ask for remote	go to the Support	Provide the Pin# to	That's it!
support.	section.	the agent.

English - 14

Troubleshooting

If the TV seems to have a problem, first review this list of possible problems and solutions. Also, review the Troubleshooting Section in the e-Manual. If none of the troubleshooting tips apply, visit www.samsung. com/support or call Samsung Customer Service at 1-800-SAMSUNG (1-800-726-7864).

Issues	Solutions and Explanations
Flickering and Dimming	If your Samsung Television is flickering or dimming sporadically, you may need to disable some of the
	energy efficiency features.
	Disable Energy Saving (System > Eco Solution > Eco Sensor) and/or Energy Saving (System > Eco
	Solution > Energy Saving) and check again.
Component Connections /Screen Color	If you find that the color on your Samsung television screen is not correct or the black and white colors
	are off, run a Self Diagnosis Picture Test (Support > Self Diagnosis > Picture Test).
	If the picture problem is caused by the TV, the problem should be visible in the Picture Test. If the problem
	is not visible, next confirm that the TV's video input jacks are connected to the correct external video
	device output jacks and that none of the connections are loose. Finally, if possible, test your external
	video devices by connecting them to another TV.
Screen Brightness	If you find that the colors on your Samsung TV are correct but just a little too dark or bright, try adjusting
	the following settings first.
	Navigate to Picture and adjust Backlight, Contrast, Brightness, Sharpness, Color, Tint (G/R) and
	other picture quality adjustment settings.
Auto Motion Plus/Blur	If you find that there is a blur or “ghost” shadow to the images on your television screen, you might be
	able to correct the issue using Auto Motion Plus (Picture > Picture Options > Auto Motion Plus).
Unwanted Powering Off	If your Samsung TV appears to turn off by itself, try disabling some of the TV's energy efficiency and
	automatic off features. Check if Sleep Timer (System > Time > Sleep Timer) has been enabled. Sleep
	Timer automatically turns off the TV after an amount of time that you select. If the Sleep Timer has not
	been enabled, see if No Signal Power Off (System > Eco Solution > No Signal Power Off) or Auto
	Power Off (System > Eco Solution > Auto Power Off) has been enabled. No Signal Power Off turns
	off the TV if no signal has been received by the TV for a specified period time. Auto Power Off turns off
	the TV if there has been no user input in four hours.
Trouble Powering On	When the TV is turned on, the remote control receiver flashes 5 times before the screen turns on.
	If you find that you are having problems powering on your Samsung television, there are a number of
	things to check before calling the service department.
	If the power cord is connected properly and the remote control is operating normally, the problem might
	be with the antenna cable connection or the cable/satellite box not being turned on. Check the antenna
	connection or turn on the cable/satellite box.
Stand Assembly	If you have any trouble assembling the stand, review the stand assembly instruction in the Quick Start
	Guide.
Cannot Find a Channel	Re-run Setup (Go to Menu > System > Setup) or run Auto Program. (Go to Menu > Broadcasting >
	Auto Program).

For detailed troubleshooting information, watch the troubleshooting videos at www.samsung.com/ spsn.

English - 15