SAMSUNG LE40F86BD User Manual [da, no, fi, sv, tr]

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.

Kontakta SAMSUNG

Om du har några frågor eller synpunkter om Samsungs produkter, är du välkommen att kontakta Samsung Support.

Kontakt SAMSUNG

Hvis du har spørgsmål eller kommentarer vedrørende Samsung produkter, venligst kontakte Samsung Support.

Kontakt SAMSUNG

Om du har spørsmål eller synspunkter om Samsungs produkter, er du velkommen å kontakte Samsung Support.

Ota yhteyttä Samsungiin

Jos sinulla on kysymyksiä tai kommentteja koskien Samsung tuotteita voitte ottaa yhtyettä Samsung tukeen.

Dünyanın her yerinden SAMSUNG’a ulaşın.

Samsung ürünleri ile ilgili sorularınız ya da yorumlarınız varsa lütfen SAMSUNG müşteri hizmetleri merkezi ile temasa geçin.

Country	Customer Care Centre	Web Site
AUSTRIA	0800-SAMSUNG(726-7864)	www.samsung.com/at
BELGIUM	0032 (0)2 201 24 18	www.samsung.com/be
CZECH REPUBLIC	844 000 844	www.samsung.com/cz
	Distributor pro Českou republiku:
	Samsung Zrt., česka organizační složka Vyskočilova 4, 14000 Praha 4
FINLAND	030-6227 515	www.samsung.com/fi
FRANCE	3260 SAMSUNG(726-7864)	www.samsung.com/fr
	08 25 08 65 65 (€ 0,15/Min)
GERMANY	01805 - 121213 (€ 0,14/Min)	www.samsung.de
HUNGARY	06-80-SAMSUNG(726-7864)	www.samsung.com/hu
ITALIA	800-SAMSUNG(726-7864)	www.samsung.com/it
LUXEMBURG	0035 (0)2 261 03 710	www.samsung.com/be
NETHERLANDS	0900 20 200 88 (€ 0,10/Min)	www.samsung.com/nl
NORWAY	815-56 480	www.samsung.com/no
POLAND	0 801 801 881	www.samsung.com/pl
	022-607-93-33
PORTUGAL	80 8 200 128	www.samsung.com/pt
REPUBLIC OF IRELAND	0818 717 100	www.samsung.com/ie
SLOVAKIA	0800-SAMSUNG(726-7864)	www.samsung.com/sk
SPAIN	902 10 11 30	www.samsung.com/es
SWEDEN	0771-400 200	www.samsung.com/se
SWITZERLAND	0800-SAMSUNG(726-7864)	www.samsung.com/ch
U.K	0870-SAMSUNG(726-7864)	www.samsung.com/uk
ESTONIA	800-7267	www.samsung.ee
LATVIA	800-7267	www.samsung.com/lv
LITHUANIA	8-800-77777	www.samsung.lt
KAZAHSTAN	8-10-800-500-55-500	www.samsung.kz
KYRGYZSTAN	00-800-500-55-500
RUSSIA	8-800-555-55-55	www.samsung.ru
UKRAINE	8-800-502-0000	www.samsung.ua
UZBEKISTAN	8-800-120-0-400	www.samsung.uz

BN68-01312C-00

LCD TV

LE40F8

LE46F8

Owner’s Instructions

Before operating the unit, please read this manual thoroughly,

and retain it for future reference.

ON-SCREEN MENUS

PC DISPLAY

PICTURE IN PICTURE (PIP)

TELETEXT

Register your product at www.samsung.com/global/register Record your Model and Serial number here for future reference.

▪ Model _______________ ▪ Serial No. _______________

Precautions When Displaying a Still Image

A still image may cause permanent damage to the TV screen.

•Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn".

To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image.

•Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and center of

the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty.

•Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.

©2007 Samsung Electronics Co., Ltd. All rights reserved.

Contents

Connecting and Preparing Your TV

List of Parts.........................................................	3
Installing the Wall Mount Kit...............................	3
Viewing the Control Panel..................................	4
Viewing the Connection Panel............................	5
Viewing the Remote Control...............................	7
Installing Batteries in the Remote Control..........	8
Switching On and Off..........................................	8
Placing Your Television in Standby Mode...........	8
Plug & Play.........................................................	9
Setting the Channels
Storing Channels Automatically........................	10
Storing Channels Manually................................	11
Adding / Locking Channels...............................	12
Sorting the Stored Channels............................	13
Assigning Channels Names.............................	13
Fine Tuning Channel Reception.......................	14
LNA(Low NoiseAmplifier)................................	14
Setting the Picture
Changing the Picture Standard........................	15
Adjusting the Custom Picture...........................	15
Changing the Colour Tone................................	16
Activating Backlight..........................................	16
Configuring Detailed Settings on the Picture....	17
Changing the Picture Size................................	18
Selecting the Screen Mode..............................	18
Digital NR / Active Colour / DNIe /
100Hz Motion Plus ..........................................	19
Resetting the Picture Settings to the
Factory Defaults...............................................	19
Viewing the Picture In Picture (PIP)..................	20
Freezing the Current Picture............................	20

Setting the Sound
Sound Features................................................	21
Connecting Headphones..................................	22
Selecting the Sound Mode...............................	22
Setting the Time
Setting and Displaying the Current Time..........	22
Setting the Sleep Timer....................................	23
Switching the Television On and Off
Automatically....................................................	23
Function Description
Choosing Your Language.................................	24
Upgrading the Software....................................	24
Game Mode / Blue Screen / Melody / Light Effect /
Energy Saving / HDMI Black Level......................	25
Selecting the Source........................................	26
Editing the Input Source Names.......................	26
USING The DTV FeATuRe
Previewing the DTV Menu System...................	27
Updating the Channel List Automatically..........	28
Updating the Channel List Manually.................	28
Editing Your Favourite Channels......................	29
Selecting Channel List......................................	31
Displaying Programme Information..................	31
Viewing the EPG
(Electronic Programme Guide) Information......	32
Using the Scheduled List..................................	33
Setting the Default Guide.................................	33
Viewing All Channels and Favourite Channels 34
Adjusting the Menu Transparency....................	34
Setting up the Parental Lock............................	35
Setting the Subtitle...........................................	36
Setting the Subtitle Mode.................................	36
Selecting the Audio Format..............................	36
Selecting the Digital Text (UK only)..................	37
Selecting the Time Zone (Spain only)...............	37
Viewing Product Information.............................	37
Checking the Signal Information.......................	38
Upgrading the Software....................................	38
Viewing Common Interface...............................	39
Selecting the CI (Common Interface) Menu.....	39
Resetting..........................................................	40
Selecting the Preferred Language
(Subtitle,Audio or Teletext)...............................	40
Preference........................................................	41

English

English - 1

Using the Teletext Feature
Teletext Decoder...............................................	41
Displaying the Teletext Information...................	42
Selecting a Specific Teletext Page....................	42
Using Fastext to Select a Teletext Page...........	43
Setting Up Your Remote Control......................	43
Remote Control Codes.....................................	44
Setting the PC
Setting up Your PC Software
(Based on Windows XP)...................................	47
Display Modes..................................................	47
Setting the PC..................................................	48
Setting the Home Theatre PC...........................	49
WISELINK
Using the WISELINK Function.........................	50
Using the WISELINK Menu..............................	51
Using the PHOTO (JPEG) List.........................	52
Using the MP3 List...........................................	55
Using the Setup Menu......................................	56
About Anynet+
What is Anynet+? .............................................	57
Connecting Anynet+ Devices............................	57
Setting Up Anynet+...........................................	58
Scanning and Switching between
Anynet+ Devices...............................................	58
Recording.........................................................	59
Listening through a Receiver............................	60
Check Points before Requesting Service.........	60

Recommendations For Use
Wall-MountAdjustment (Sold separately).........	61
Using the Anti-Theft Kensington Lock
(depending on the model).................................	62
Troubleshooting: Before Contacting
Service Personnel............................................	62
Technical and Environmental Specifications ...	63

Symbol	Press	Important	Note
			Button

English - 2

List of Parts

Please make sure the following items are included with your LCD TV.

If any items are missing, contact your dealer.

Remote Control &			Power Cord	Cover-Bottom	Cleaning Cloth
Batteries
(AAA x 2)
 Owner’s Instructions			 Warranty card	 Safety Guide	 Registration Cards

Warranty card / Safety Guide / Registration Cards (Not available in all locations)

Installing the Wall Mount Kit

Wall mount items (sold separately) allow you to mount

the TV on the wall.

For detailed information on installing the wall mount,

see the instructions provided with the Wall Mount items.

Contact a technician for assistance when installing the

wall mounted bracket.

Samsung Electronics is not responsible for any damage

to the product or injury to yourself or others

if you elect to install the TV on your own.

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due

to electric shock

Remove the stand and cover the bottom hole with a cap and fasten with two screws.

English -

Viewing the Control Panel

Front Panel buttons

Touch the each button to operate.

The product colour and shape may vary depending on the model.

1SOURCE

Toggles between all the available input sources (TV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI1, HDMI2, HDMI3,

DTV). In the on-screen menu, use this button as you use the ENTER/OK button on the remote control.

2MENU

Press to see an on-screen menu of your TV’s features.

3

Press to decrease or increase the volume. In the on-screen menu, use the buttons as you use the ◄ and ► buttons on the remote control.

4

Press to change channels.

In the on-screen menu, use the buttons as you use the ▼ and ▲ buttons on the remote control.

(Without the Remote Control, you can turn on the TV by using the Channel buttons.)

5Power Indicator

Blinks and turns off when the power is on and lights up in stand-by mode.

6Remote Control Sensor

Aim the remote control towards this spot on the TV.

7Speakers

8 (Power)

Touch the silver sensor below the () mark to turn the TV on and off.

Silver sensor

English -

Viewing the Connection Panel

1									2									3							4

#

@ Power Input !0

9

[Side Panel Jacks]

5

3

6

8 7

The product colour and shape may vary depending on the model.

Whenever you connect an external device to your TV, make sure that power on the unit is turned off.

When connecting an external device, match the colour of the connection terminal to the cable.

1 EXT 1, EXT 2

Connector	Video	Input	RGB	Output
EXT 1		Audio(L/R)		Video +Audio (L/R)
	o	o	o	Only TV or DTV output is available.
EXT 2	o	o		Output you can choose.

-Inputs or outputs for external devices, such as VCR, DVD, video game device or video disc players.

2 AUDIO OUT(R-AUDIO-L)

- Connect RCA audio cables to AUDIO OUT "R-AUDIO-L" on the rear of your set and the other ends to corresponding audio in connectors on the Amplifier or DVD Home Theatre.

3 HDMI IN 1, HDMI IN 2, HDMI IN 3

- Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players)

- No additional Audio connection is needed for an HDMI to HDMI connection.

- When using an HDMI/DVI cable connection, you must use the HDMI IN2 jack. What is HDMI?

-“High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels of digital audio (5. 1 channels).

-The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable

(not supplied). The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports multi - channel digital audio.

The TV may not output sound and pictures may be displayed with abnormal colour when DVD players/Cable Boxes/Satellite receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound, connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) "R-AUDIO-L" jacks on the back of the TV. If this happens, contact the company that provided the DVD player/Cable Box/Satellite receiver to confirm the HDMI version, then request an upgrade.

HDMI cables that are not 1.3 may cause annoying flicker or no screen display.

DVI IN (HDMI 2) (R-AUDIO-L)

- DVI audio outputs for external devices.

English -

Supported modes for HDMI/DVI and Component

	480i	480p	576i	576p	720p	1080i	1080p
HDMI/DVI 50Hz	X	X	X	O	O	O	O
HDMI/DVI 60Hz	X	O	X	X	O	O	O
Component	O	O	O	O	O	O	X

4ANT IN

To view television channels correctly, a signal must be received by the set from one of the following sources:

-An outdoor aerial / A cable television network / A satellite network

5COMMON INTERFACE Slot

-When not inserting "CI CARD" in some channels,"Scrambled Signal" is displayed on the screen.

-The pairing information containing a telephone number, CI CARD ID, Host ID and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider.

-When the channel information configuration has finished, the message "Updating Completed" is

displayed, indicating that the channel list is now updated.

You must obtain a CI CARD from a local cable service provider.

Remove the CI CARD by carefully pulling it out with your hands since dropping the CI CARD may cause damage to it.

Insert the CI-Card in the direction marked on it.

6WISELINK

-Connect a USB mass storage device to view photo files (JPEG) and play audio files (MP3)

7Headphones jack

-Headphone may be connected to the headphone output on your set. While the head phone is connected, the sound from the built-in speakers will be disabled.

8S-VIDEO or VIDEO / R-AUDIO-L

-Connect RCA or S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

-Connect RCA audio cables to "R - AUDIO - L" on your set and the other ends to corre sponding audio out connectors on the A/V device.

9PC IN (PC)/(AUDIO)

-Connect to the video and audio output jack on your PC.

0 DIGITAL AUDIO OUT (OPTICAL)

-Connect to a Digital Audio Component.

!SERVICE

-Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your remote control.

@COMPONENT IN

-Connect component video cables (optional) to component connector ("PR", "PB", "Y") on the rear of your set and the other ends to corresponding component video out connectors on the DTV or DVD.

-If you wish to connect both the Set-Top Box and DTV (or DVD), you should connect the Set-Top Box to the DTV (or DVD) and connect the DTV (or DVD) to component connector ("PR", "PB", "Y") on your set.

-The PR, PB and Y connectors on your component devices (DTV or DVD) are sometimes labeled Y,

B-Y and R-Y or Y, Cb and Cr.

-Connect RCA audio cables (optional) to "R - AUDIO - L" on the rear of your set and the other ends to corresponding audio out connectors on the DTV or DVD.

-This LCD TV displays its optimum picture resolution in 1080p mode.

-This LCD TV displays its maximum picture resolution in 1080p mode.

#Kensington Lock (depending on the model)

-The Kensington lock (optional) is a device used to physically fix the system when used in a public place.

-If you want to use a locking device, contact the dealer where you purchased the TV.

-The place of the Kensington Lock may be different depending on its model.

English -

Viewing the Remote Control

	1 Selects a target device to be	b P	: Next channel
	controlled by the Samsung	P	: Previous channel
	remote control (TV, DVD,	c Exit the on-screen menu
	STB, CABLE, VCR)
	(Refer to pages 43~46)	d Control the cursor in the
	2 Television Standby button	menu
		e Use to see information on
	3 Number buttons for direct
		the current broadcast
	channel access
		f Runs the Anynet view
	4 One/Two-digit channel
		functions and sets up Anynet+
	selection
		devices.
	5 It display "Channel List"
		g Colour buttons :
	on the screen.
		Press to add or delete
	6 Selects the TV and DTV	channels and to store
	mode directly	channels to the favorite
	7 VCR/DVD Functions	channel list in the “Channel
		List” menu.
	Rewind, Stop, Play/Pause,
	Fast/Forward	h Picture-In-Picture On / Off
	8 Volume increase	i Digital subtitle display
	Volume decrease	j Picture effect selection
	9 Temporary sound switch-off
		k Picture freeze
	0 Displays the main on-screen
		l When your remote does not
	menu	work, change the batteries
	! Returns to the previous
		and press the "RESET"
	menu	button for 2-3 seconds before
	# Electronic Program Guide	use.
	(EPG) display	Teletext Functions
	$ Picture size selection
		6 Exit from the teletext display
	% Sound effect selection
		0 Teletext index
	^ Adjusts 5 separate devices
		@ Alternately select Teletext,
	- TV, DVD, STB, CABLE, or
	VCR.	Double, or Mix.
	& Press to backlight the VOL,	$ Teletext size selection
	CH, and the active source	* Teletext mode selection
	button(TV, DVD, CABLE, STB,
	VCR) on the remote.	(LIST/FLOF)
		( Teletext sub page
	* Available source selection
		b P	: Teletext next page
	( Previous channel
		P : Teletext previous page
	) This function enables you to
		c Teletext cancel
	view and play photo (JPEG)
	and audio files (MP3) from an	e Teletext reveal
	external device.	g Fastext topic selection
	a This remote can be used to
		h Teletext hold
	control recording on Samsung
	recorders.	j Teletext store
	(Anynet+ function only)

The performance of the remote control may be affected by bright light.

This is a special remote control for the visually impaired, and has Braille points on the Power, Channel, STOP, PLAY/PAUSE and Volume buttons.

English -

Installing Batteries in the Remote Control

1.Lift the cover at the back of the remote control upward as shown in the

figure.

2. Install two AAA size batteries.

Make sure to match the "+" and "–" ends of the batteries with the diagram inside the compartment.

3.Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV.

(Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work, check the following:

1.Is the TV power on?

2.Are the plus and minus ends of the batteries reversed?

3.Are the batteries drained?

4. Is there a power outage, or is the power cord unplugged? 5. Is there a special fluorescent light or neon sign nearby?

Switching On and Off

The mains lead is attached to the rear of your set.

1.Plug the mains lead into an appropriate socket.

The standby indicator lights up on the front of the set.

2.Press the button on the front of the set.

You also can press the POWER button or the TV/DTV button on the remote control to turn the TV on.

The programme that you were watching last is reselected automatically.

3.Press the numeric button (0~9) or channel up/down (/) button on the remote control or button on the right side of the set.

When you switch the set on for the very first time, you will be asked to choose language in which the menus are to be displayed.

4.To switch your set off, press the POWER button again.

Placing Your Television in Standby Mode

Your set can be placed in standby mode in order to reduce the power consumption. The standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).

1.Press the POWERbutton on the remote control.

The screen is turned off and a red standby indicator appears on the front of your set.

2.To switch your set back on, simply press the POWER, numeric buttons (0~9), TV/DTV button or channel up/down (/) button again.

Do not leave your set in standby mode for long periods of time (when you are away on holiday, for example).

It is best to unplug the set from the mains and aerial. 

English -

Plug & Play

When the TV is initially powered on, several basic settings
		Plug & Play
proceed automatically and subsequently. The following
settings are available.
Any functions related to Digital TV (DVB) will only work in		Start Plug & Play.
countries or areas where DVB-T (MPEG2) digital terrestrial
signals are broadcasted. Please confirm with your local			OK
dealer if you can receive DVB-T signals. Although this TV set
follows the DVB-T specification, maintaining compatibility with				Enter
the future coming DVB-T digital terrestrial broadcasts is not
guaranteed. Several functions may not be available in some countries.

1.Press the POWER button on the remote control.

The message "Start Plug & Play" is displayed with "OK" selected.

2.Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER/OK button to confirm your choice.

3.Press the ◄ or ► button to select “Shop” or “Home”, then the ENTER/OK button.

We recommend setting the TV to Home mode for the best picture in your home environment.

Shop mode is only intended for use in retail environments.

If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home) mode, press the Volume button and then hold down the MENU button for five seconds on the side panel of the TV.

4.The message "Check antenna input." is displayed with "OK" selected. Press the ENTER/OK button.

Please check that the antenna cable is connected correctly.

5.Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER/OK button to confirm your choice.

6.The message “Some DTV functions may not be available. Digital Scan?” is displayed.

Press the ◄ or ► button to select “Yes” or “No”, then press the ENTER/OK button.

Yes: First an ATV search is performed and then a DTV ch. auto search is performed.

No: Only an ATV search is performed.

This function is supported for all countries except for the following countries : France, Germany, Italy, Netherlands, Spain, Switzerland, United Kingdom, Austria, Sweden, Finland

7.The "Auto Store" menu is displayed with the "Start" selected. Press the ENTER/OK button.

The channel search will start and end automatically.

The DTV channel scan menu appears and the DTV channel is automatically updated. If the DTV channel is updated, the Source in the source list of the Input menu is automatically

changed to DTV.

After all the available channels are stored, the "Clock Set" menu appears.

Press the ENTER/OK button at any time to interrupt the memorization process.

For detailed descriptions about DTV channel update, refer to page 28 of this manual.

After all the available digital channels are stored, the screen to select a time zone is displayed depending on the country.

8.Press the ENTER/OK button.

Select the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ◄ or ► button. Set the "Month", "Day", "Year", "Hour", or "Minute" by pressing the ▲ or ▼ button.

You can also set the “Month”, “Day”, “Year”, “Hour” and “Minute” by pressing the number buttons on the remote control.

9.Press the ENTER/OK button to confirm your setting. The message “Enjoy your viewing” is displayed. When you have finished, press the ENTER/OK button.

Even if the ENTER/OK button is not pressed, the message will automatically disappear after several seconds.

Language: Select your language.

Country: Select your country.

Auto Store: Automatically scans for and stores channels available in the local area.

Clock Set: Sets the current time for the TV clock.

English -

If you want to reset this feature...

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER/OK button.

2.Press the ENTER/OK button again, to select "Plug & Play".

3.The message "Start Plug & Play" is displayed.

(Refer to page 9)

TV	Setup
Plug & Play	:English	
Language		
Time	:Off	
Game Mode		
Blue Screen	:Off	
Melody	:Off	
PC	:Off	
Home Theatre PC		
Light Effect	: In Watching TV 
More
Move	Enter	Return

Plug & Play

Start Plug & Play.

OK

Enter Return

-Storing Channels Automatically

-Storing Channels Manually

TV	Analog Channel
Country	: Belgium	
Auto Store		
Manual Store		
Channel Manager		
Sort		
Name		
Fine Tune	: Off	
LNA		
Move	Enter	Return

Storing Channels Automatically

You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Analog Channel", then press the ENTER/OK button.

2.Press the ENTER/OK button to select "Country".

3.Select the appropriate country by pressing the ▲ or ▼ button. Press the ENTER/OK button to confirm your choice.

Even though you have changed the country setting in this menu, the country setting for DTV is not changed. (Refer to page 28)

4.Press the ▲ or ▼ button to select "Auto Store", then press the ENTER/OK button.

5.Press the ENTER/OK button.

The TV will begin memorizing all of the available channels.

Press the ENTER/OK button at any time to interrupt the memorization process and return to the "Analog Channel" menu.

6.After all the available channels are stored, the "Sort" menu appears. (refer to page 13)

English - 10

Storing Channels Manually

Not available in DTV or external input mode.

You can store television channels, including those received via cable networks.

When storing channels manually, you can choose:

♦Whether or not to store each of the channels found.

♦The programme number of each stored channel which you wish to identify.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Analog Channel", then press the ENTER/OK button.

2.Press the ▲ or ▼ button to select "Manual Store", then press the ENTER/OK button.

3.Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.

4.When you are satisfied with your setting, press the

ENTER/OK button.

TV	Analog Channel
Country	: Belgium	
Auto Store		
Manual Store		
Channel Manager		
Sort		
Name		
Fine Tune	: Off	
LNA		
Move	Enter	Return
TV	Manual Store

Programme	: P 2
Colour System	: Auto	
Sound System	: BG	
Channel	: C 3
Search	: 77 MHz
Store	: ?
Move	Enter	Return

5.Press the EXIT button to exit.

♦Programme (Programme number to be assigned to a channel) − Press the ▲ or ▼ button until you find the correct number.

You can also select the channel number directly by pressing the numeric buttons (0~9).

♦Colour System: Auto/PAL/SECAM/NTSC4.43

−Press the ▲ or ▼ button to select the required colour standard.

♦Sound System: BG/DK/I/L

−Press the ▲ or ▼ button to select the required sound standard.

♦Channel (When you know the number of the channel to be stored)

−Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel).

−Press the ► button, then press the ▲ or ▼ button to select the required number.

You can also select the channel number directly by pressing the numeric buttons (0~9).

If there is abnormal sound or no sound, re-select the sound standard required.

♦Search (When you do not know the channel numbers)

−Press the ▲ or ▼ button to start the search.

−The tuner scans the frequency range until the first channel or the channel that you selected is received on the screen.

♦Store (When you store the channel and associated programme number)

−Set to "OK" by pressing the ENTER/OK button.

Channel mode

−P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to P99. You can select a channel by entering the position number in this mode.

−C (Air channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode.

−S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode.

English - 11

Adding / Locking Channels

Not available in DTV or external input mode.

Using the Channel Manager, you can conveniently lock or add channels.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Analog Channel", then press the ENTER/OK button.

2.Press the ▲ or ▼ button to select "Channel Manager", then press the ENTER/OK button.

♦Adding channels

Using the Channel List, you can add channels.

3.Select Channel List by pressing the ENTER/OK button.

4.Move to the () field by pressing the ▲, ▼, ◄ or ► button, select a channel to be added, and press the ENTER/OK button to add the channel.

If you press the ENTER/OK button again, the ( ) symbol next to the channel disappears and the channel is not added.

"" is active when "Child Lock" is selected to "On".

♦Locking channels

This feature allows you to prevent unauthorized users, such as children, from watching unsuitable programmes by muting out video and audio.

5.Press the ▲ or ▼ button to select "Child Lock", then press the ENTER/OK button.

6.Select "On" by pressing the ▲ or ▼ button, then press the

ENTER/OK button.

7.Press the ▲ or ▼ button to select "Channel List", then press the ENTER/OK button.

8.Move to the () field by pressing the ▲, ▼, ◄ or ► button, select a channel to be locked, and press the ENTER/OK button.

If you press the ENTER/OK button again, the ( ) symbol next to the channel disappears and the channel lock is canceled.

A blue screen is displayed when Child Lock is activated.

9.Press the EXIT button to exit.

Select "On" or "Off" in "Child Lock" to easily turn the channels which selected on "" to be active or inactive.

You can select these options by simply pressing the CH LIST button on the remote control

TV	Analog Channel
Country	: Belgium	
Auto Store		
Manual Store		
Channel Manager		
Sort		
Name		
Fine Tune	: Off	
LNA		
Move	Enter	Return

TV	Channel Manager
	Channel List		
	Child Lock	: Off	
	Move	Enter	Return

Channel List

P 1 C3

1 / 10

Prog.

0	C--
1	C3
2	BBC 1
3	C74
4	C75
5	C76
6	S3
7	S4
8	S6
9	S7

Add	Lock
Move	Enter
Page	Return

English - 12

Sorting the Stored Channels

This operation allows you to change the programme numbers of the stored channels.

This operation may be necessary after using the auto store.

Not available in DTV or external input mode.

1.Press the MENU button to display the menu. Press the ▲ or ▼ button to select "Analog Channel", then press the ENTER/OK button.

2.Press the ▲ or ▼ button to select "Sort", then press the

ENTER/OK button.

3.Select the channel number that you wish to change by press ing the ▲ or ▼ button repeatedly. Press the ENTER/OK button.

The selected channel number and name are moved to right side.

4.Press the ▲ or ▼ button to move to the position in which you would like to change and then press the ENTER/OK button.

The selected channel is exchanged with the one previously stored to the chosen number.

5.Repeat steps 3 to 4 for another channel to be sorted.

6.Press the EXIT button to exit.

TV	Analog Channel
Country		: Belgium	
Auto Store			
Manual Store			
Channel Manager			
Sort			
Name			
Fine Tune		: Off	
LNA			
Move		Enter	Return
TV		Sort
Prog.	Ch.	Name
	

0	C--
1	C23	

2C16

3C3

4S1



Move

Enter

Return

Assigning Channels Names

Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names.

Not available in DTV or external input mode.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Analog Channel", then press the ENTER/OK button.

2.Press the ▲ or ▼ button to select "Name", then press the

ENTER/OK button.

3.If necessary, select the channel to be assigned to a new name by pressing the ▲ or ▼ button. Press the ENTER/OK button.

The selection bar is displayed around the name box.

	4.
		To...	Then...
		Select a letter, number or symbol	Press the ▲ or ▼ button
		Move on the next letter	Press the ► button
		Move back the previous letter	Press the ◄ button
		Confirm the name	Press the ENTER/OK button

TV	Analog Channel
Country	: Belgium	
Auto Store		
Manual Store		
Channel Manager		
Sort		
Name		
Fine Tune	: Off	
LNA		
Move	Enter	Return
TV	Name

Prog.	Ch.	Name
	
0	C--	-----
1	C23	-----
2	C16	-----
3	C3	-----
4	S1	-----
	
	Move	Enter	Return

The characters available are : Letters of the alphabet (A~Z) / Numbers (0~9)

Special characters (+, -, *, /, space)

5.Repeat steps 3 to 4 for each channel to be assigned to a new name.

6.Press the EXIT button to exit.

English - 13

Fine Tuning Channel Reception

Use fine tuning to manually adjust a particular channel for optimal reception.

Not available in DTV or external input mode.

1.Use the number buttons to directly select the channel that you want to fine tune.

2.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Analog Channel", then press the ENTER/OK button.

3.Press the ▲ or ▼ button to select "Fine Tune", then press the ENTER/OK button.

4.Press the ◄ or ► button to adjust the fine tuning. Press the ENTER/OK button.

5.Press the EXIT button to exit.

Fine tuned channels that have been saved are marked with an asterisk "*" on the right-hand side of the channel number in the channel banner. And the channel number turns red.

To reset the fine-tuning, select "Reset" by pressing the ▲ or ▼ button and then press the ENTER/OK button.

TV	Analog Channel
Country	: Belgium	
Auto Store		
Manual Store		
Channel Manager		
Sort		
Name		
Fine Tune	: Off	
LNA		
Move	Enter	Return

Fine Tune

P 1

0

Reset

Adjust

Save

Return

LNA (Low Noise Amplifier)

If the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal).

Not available in DTV or external input mode.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Analog Channel", then press the ENTER/OK button.

2.Press the ▲ or ▼ button to select "LNA", then press the

ENTER/OK button.

3.Press the ▲ or ▼ button to select "On" or "Off". Press the ENTER/OK button.

4.Press the EXIT button to exit.

TV	Analog Channel
Country	: Belgium	
Auto Store		
Manual Store		
Channel Manager		
Sort		
Name		
Fine Tune	: Off	
LNA		
Move	Enter	Return

TV	Analog Channel
Country	: Belgium
Auto Store
Manual Store
Channel Manager
Sort
Name
Fine Tune	:	Off
LNA
		On

Move

Enter

Return

English - 14

Changing the Picture Standard

You can select the type of picture which best corresponds to your viewing requirements.

1.Press the MENU button to display the menu. Press the ENTER/OK button, to select "Picture".

2.Press the ENTER/OK button again, to select "Mode".

3.Press the ▲ or ▼ button to select the desired picture effect. Press the ENTER/OK button.

4.Press the EXIT button to exit.

♦Dynamic: Selects the picture for high-definition in a bright room.

♦Standard: Selects the picture for optimum display in a normal environment.

♦Movie: Selects the picture for comfortable display in a dark room.

The Picture mode must be adjusted separately for each input source.

You can also press the P.MODE button on the remote control to select one of the picture settings.

TV	Picture
Mode	: Dynamic	
Contrast		100
Brightness		45
Sharpness		75
Colour	G50	55
Tint		R50
Colour Tone	: Cool1	
Detailed Settings		
Backlight	: 10	
sMore
Move	Enter	Return
TV

	Picture
Mode	: DynamicDynamic		100
Contrast	Standard
Brightness	Movie		45
Sharpness			75
Colour	G50		55
Tint		R50
Colour Tone	: Cool1
Detailed Settings
Backlight	: 10
sMore

Move

Enter

Return

Adjusting the Custom Picture

Your set has several settings which allow you to control picture quality.

1.To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3.

2.Press the ▲ or ▼ button to select a particular item. Press the ENTER/OK button.

3.Press the ◄ or ► button to decrease or increase the value of a particular item. Press the ENTER/OK button.

TV	Picture
Mode	: Dynamic	
Contrast		100
Brightness		45
Sharpness		75
Colour	G50	55
Tint		R50
Colour Tone	: Cool1	
Detailed Settings		
Backlight	: 10	
sMore
Move	Enter	Return

4.Press the EXIT button to exit.

♦Contrast: Adjusts the lightness and darkness between objects and the background.

♦Brightness: Adjusts the brightness of the whole screen.

♦Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.

♦Colour: Adjusts the colours, making them lighter or darker.

♦Tint: Adjusts the colour of objects, making them more red or green for a more natural look.

The adjusted values are stored according to the selected Picture mode. In PC Mode, Only "Contrast" and "Brightness" can be adjusted.

"Tint" is only activated for NTSC broadcasting, DTV broadcasting, " Ext.", "AV", "S-Video", "Component" and "HDMI" modes.

You can return to the factory defaults picture settings by selecting the "Reset". (Refer to "Resetting the Picture Settings to the Factory Defaults" on page 19)

English - 15

Changing the Colour Tone

You can select the most comfortable colour tone to your eyes.

1.To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3.

(On page 15)

2.Press the or button to select "Colour Tone", then press the ENTER/OK button.

3.Press the or button to select the desired colour tone setting. Press the ENTER/OK button.

4.Press the EXIT button to exit

♦Cool2: Makes the colour temperature bluer than "Cool1" menu.

♦Cool1: Makes whites bluish.

♦Normal: Keeps whites white.

♦Warm1: Makes whites reddish.

♦Warm2: Makes the colour temperature redder than "Warm1" menu.

TV	Picture
Mode	: Dynamic		
Contrast			100
Brightness			45
Sharpness			75
Colour	G50		55
Tint			R50
Colour Tone	: Cool1		
Detailed Settings			
Backlight	: 10		
sMore
Move	Enter		Return
TV	Picture
Mode	: Dynamic		100
Contrast
Brightness			45
Sharpness			75
Colour	G50		55
Tint		Cool 2 R50
Colour Tone	: Cool1Cool 1
Detailed Settings		Normal
Backlight	: 10 Warm 1
sMore		Warm 2

Move

Enter

Return

The adjusted values are stored according to the selected Picture mode.

When the picture mode is set to "Dynamic" or "Standard", "Warm1" and "Warm2" cannot be selected.

Activating Backlight

You can adjust the screen brightness by adjusting the LCD backlight brightness. (0~10)

1.To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3.

(On page 15)

2.Press the ▲ or ▼ button to select “Backlight”, then press the

ENTER/OK button.

3.Press the ◄ or ► button to decrease or increase the value of a particular item.

4.Press the ENTER/OK button. Press the EXIT button to exit.

TV	Picture
Mode	: Dynamic	
Contrast		100
Brightness		45
Sharpness		75
Colour	G50	55
Tint		R50
Colour Tone	: Cool1	
Detailed Settings		
Backlight	: 10	
sMore
Move	Enter	Return
Backlight		10

Adjust Return

English - 16

Configuring Detailed Settings on the Picture
You can set detailed picture settings.		TV		Picture
1. Press the MENU button to display the menu.			Mode	: Movie	
			Contrast		80
	Press the ENTER/OK button, to select "Picture".		Brightness		45
			Sharpness		30
2. Press the ▲ or ▼ button to select "Detailed Settings", then			Colour	G50	53
			Tint		R50
	press the ENTER/OK button.		Colour Tone	: Warm 2	
3.	Select the required option by pressing the ▲ or ▼ button,		Detailed Settings		
			Backlight	: 5	
	then press the ENTER/OK button.		sMore
			Move	Enter	Return
4.	When you are satisfied with your setting, press the
		TV	Detailed Settings
	ENTER/OK button.		Black Adjust	: Off	
5.	Press the EXIT button to exit.		Dynamic Contrast : Off		
			Gamma	: 0	
	"Detailed settings" is available in "Standard" or "Movie" mode.		White Balance		
			My Colour Control		
	If "DNIe" is Off, the "Detailed Settings" cannot be selected		Edge Enhancement : Off		
			Colour Space	: Auto	
	when the Picture mode is in "Standard" mode.		xvYCC	: Off	
			Move	Enter	Return

♦Black Adjust: Off/Low/Medium/High

You can directly select the black level on the screen to adjust the screen depth.

♦Dynamic Contrast: Off/Low/Medium/High

You can adjust the screen contrast so that the optimal contrast is provided.

♦Gamma: -3 ~ +3

You can adjust the Primary Color (Red, Green, Blue) Intensity. Press the ◄ or ► button until you reach the optimal setting.

♦White Balance: R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain/Reset

You can adjust the colour temperature for more natural picture colours.

R-Offset/G-Offset/B-Offset/R-Gain/G-Gain/B-Gain: Changing the adjustment value will refresh the adjusted screen.

Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button. Press the ◄ or ► button until you reach the optimal setting.

Reset: The previously adjusted white balance will be reset to the factory defaults.

♦My Colour Control: Pink/Green/Blue/White/Reset

This setting can be adjusted to suit your personal preferences.

Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen.

Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button. Press the ◄ or ► button until you reach the optimal setting.

Reset: The previously adjusted colours will be reset to the factory defaults.

♦Edge Enhancement: Off/On

You can emphasize object boundaries.

♦Colour Space: Auto/Wide

You can set the colour reproduction space for the input signal to Auto or Wide.

♦XVYCC: Off/On

Setting the xvYCC mode to On increases detail and colour space when watching movies from an external device (ie. DVD player) connected to the HDMI or

Component IN jacks. You must set the Picture Mode to Movie to enjoy this feature.

Only available in "HDMI" and "Component" on "Movie" mode.

If xvYCC function is active, PIP cannot be selected.

English - 17

Changing the Picture Size

You can select the picture size which best corresponds to your viewing requirements.

1.Press the MENU button to display the menu. Press the ENTER/OK button, to select "Picture".

2.Press the ▲ or ▼ button to select "Size", then press the

ENTER/OK button.

3.Select the required option by pressing the ▲ or ▼ button. Press the ENTER/OK button.

4.Press the EXIT button to exit.

♦Auto Wide: Automatically adjusts the picture size to the "16:9" aspect ratio.

♦16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.

♦Wide Zoom: Magnify the size of the picture more than 4:3.

♦Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.

♦4:3: This is the default setting for a video movie or normal broadcasting.

♦Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i/1080p) or Component (720p/1080i/1080p) signals are input.

"Auto Wide" function is available only in "TV", "DTV", "Ext.1", "Ext.2", "AV", and "S-Video" mode.

In PC Mode, only "16:9" and "4:3" mode can be adjusted.

Depending on the input source, the picture size options may vary.

The items available may differ depending on the selected mode

Zoom : Select by pressing the ◄or ►button.

Use the ▲or ▼button to move the picture up and down. After selecting , use the ▲or ▼ button to magnify or reduce the picture size in the vertical direction.

Wide Zoom : Move the screen up/down using the ▲or ▼ button after selecting the by pressing the ► or

ENTER/OK button.

TV	Picture
rMore
Size	: Auto Wide		
Screen Mode	: 16 : 9		
Digital NR	: Auto		
Active Colour	: On		
DNle	: On		
100Hz Motion Plus : Low			
Reset	: OK		
Move	Enter	Return

TV	Size
Auto Wide
16 : 9
Wide Zoom
Zoom
4 : 3
Just Scan
Move	Enter	Return

You can select these options by simply pressing the P.SIZE button on the remote control.

Selecting the Screen Mode

When setting the picture size to Auto Wide in a 16:9 wide TV, you can determine the picture size you want to see the 4:3 WSS (Wide Screen Service) image or nothing. Each individual European country requires different picture size so this function is intended for users to select it.

1.Press the MENU button to display the menu. Press the ENTER/OK button, to select “Picture”.

2.Press the ▲ or ▼ button to select "Screen Mode", then press the ENTER/OK button.

3.Select the required option by pressing the ▲ or ▼ button. Press the ENTER/OK button.

TV	Picture
rMore
Size	: Auto Wide
Screen Mode	: 16 : 916:9
Digital NR	: OffWide Zoom
Active Colour	: Off	Zoom
DNle	: Off	4:3
100Hz Motion Plus : Low
Reset	: OK
Move	Enter	Return

♦16:9: Sets the picture to 16:9 wide mode.

♦Wide Zoom: Magnify the size of the picture more than 4:3.

♦Zoom: Magnify the size of the picture vertically on screen.

♦4:3: Sets the picture to 4:3 normal mode.

4.Press the EXIT button to exit.

This function is available in "Auto Wide" mode.

This function is not available in PC, Component or HDMI mode.

English - 18

Digital NR / Active Colour / DNIe / 100Hz Motion Plus

1.Press the MENU button to display the menu. Press the ENTER/OK button, to select “Picture”.

2.Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.

Available options: Digital NR, Active Colour, DNIe, 100Hz

Motion Plus.

3.When you are satisfied with your setting, press the

ENTER/OK button.

4.Press the EXIT button to exit.

TV	Picture
rMore
Size	: Auto Wide		
Screen Mode	: 16 : 9		
Digital NR	: Auto		
Active Colour	: On		
DNle	: On		
100Hz Motion Plus : Low			
Reset	: OK		
Move	Enter	Return

♦Digital NR: Off/Low/Medium/High/Auto

If the signal received by the television is weak, you can activate this feature to reduce any static and ghosting that may appear on the screen.

This function is not available in PC mode.

♦Active Colour: Off/On

If you turn on this option, the colours of the sky and grass will be stronger and clearer for a more vivid on-screen picture.

This function is not available in PC mode.

This function is not available in "Movie" and "Standard" mode.

♦DNIe: Off/On

This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you can view the screen with the DNIe feature activated.

DNIeTM (Digital Natural Image engine)

This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer, more detailed image to you. DNIeTM technology will fit every signal into your eyes.

This function is not available in PC mode.

This function is not available in "Movie" mode

♦100Hz Motion Plus: Off/Low/Medium/High/Demo

You can view more natural skin and clear text even in fast moving scenes. This function is not available in PC mode.

Resetting the Picture Settings to the Factory Defaults

You can return to the factory defaults picture settings.

1.To select the desired picture effect, follow the

"Changing the Picture Standard" instructions number 1 to 3 on page 15.

2.Press the ▲ or ▼ button to select "Reset", then press the

ENTER/OK button.

3.Press the ▲ or ▼ button to select "OK" or "Cancel". Press the ENTER/OK button.

4.Press the EXIT button to exit.

The "Reset" will be set for each picture mode.

TV	Picture
rMore
Size	: Auto Wide		
Screen Mode	: 16 : 9		
Digital NR	: Auto		
Active Colour	: On		
DNle	: On		
100Hz Motion Plus : Low			
Reset	: OK		
Move	Enter	Return

English - 19

Viewing the Picture In Picture (PIP)

You can display a sub picture within the main picture of set programme or video input. In this way, you can watch the picture of set programme or video input from any connected equipment while watching the main picture.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select "PIP", then press the

ENTER/OK button.

3.Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.

4.When you are satisfied with your setting, press the

ENTER/OK button.

5.Press the EXIT button to exit.

You may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke.

♦PIP: On/Off

You can activate or deactivate the PIP function.

Main picture	Sub picture
Component	Analog TV broadcasts
HDMI 1, 2, 3	Ext.1, Ext.2
PC	AV

TV	Setup
More
Wall-Mount Adjustment		
Energy Saving	: Off	
HDMI Black Level: Low		
PIP		
SW Upgrade		
Move	Enter	Return

TV	Mode	: Custom		
	Equalizer	PIP		
		: On
	PIP			
	SRS TS XT	: Off		
	Source	: TV		
	Auto Volume	: Off		
	Size	:	Off	
	Internal Mute	:		
	Position
	ProgrammeReset	: P 1		
	Move	Enter		Return
	Move	Enter		Return

Press the PIP button on the remote control repeatedly to activate or deactivate the "PIP".

♦Source: TV/Ext.1/Ext.2/AV

You can select a source of the sub-picture.

♦Size: / /

You can select a size of the sub-picture.

If main picture is in "PC" and "Component" mode, "Size" is not available.

♦Position: / / /

You can select a position of the sub-picture.

♦Programme

You can select a channel of the sub-picture only when the "Source" is set to "TV".

Freezing the Current Picture

Press the STILL button to freeze a moving picture into a still one. Press again to cancel.

English - 20

Sound Features
1. Press the MENU button to display the menu.		Sound
Press the ▲ or ▼ button to select "Sound", then press the	Mode	: Custom	
ENTER/OK button.	Equalizer		
	SRS TS XT	: Off	
2. Select the required option by pressing the ▲ or ▼ button,	Auto Volume	: Off	
	Internal Mute	: Off	
then press the ENTER/OK button.	Sound Select	: Main	
Available options: Mode, Equalizer, SRS TS XT, Auto	Reset
Volume, Internal Mute, Sound Select(in
PIP mode), Reset (If Game Mode is On)	Move	Enter	Return
3. When you are satisfied with your setting, press the	TV	Equalizer
ENTER/OK button.
4. Press the EXIT button to exit.	R
♦ Mode: Standard/Music/Movie/Speech/Custom
You can select the type of special sound effect to be used
when watching a given broadcast.	L
♦ Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz	Balance 100Hz 300Hz 1kHz 3kHz 10kHz
The sound settings can be adjusted to suit your personal	Move	Adjust	Return
preferences.

If you make any changes to these settings, the sound mode is automatically switched to "Custom".

♦SRS TS XT: Off/On

TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats.

TruSurround XT, SRS and symbol are trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.

♦Auto Volume: Off/On

Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.

♦Internal Mute: Off/On

If you want to hear the sound through separate speakers, cancel the internal amplifier.

The +, - and MUTE buttons do not operate when the "Internal Mute" is set to On.

When "Internal Mute" is set to "On", the Sound menus except for "Sound Select" (in PIP mode) cannot be adjusted.

♦Sound Select: Main/Sub

When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. − Main: Used to listen to the sound of the main picture.

− Sub: Used to listen to the sound of the sub picture.

♦Reset

If "Game Mode" is On, the Reset Sound function is activated(refer to page 25). Selecting the

Reset function after setting the equalizer resets the equalizer setting to the factory defaults.

TRADEMARK & LABEL LICENSE NOTICE

Manufactured under license from Dolby Laboratorories.

"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

English - 21

Connecting Headphones

You can connect a set of headphones to your set if you wish to watch a TV programme without disturbing the other people in the room.

When you insert the head set jack into the corresponding port, you can operate only "SRS TS XT", "Auto Volume and "Sound Select"(in

PIP mode) in Sound menu.

TV Side Panel

Prolonged use of headphones at a high volume may damage your hearing.

You will not receive sound from the speakers when you connect headphones to the system.

The headphone volume and TV volume are adjusted differently.

Selecting the Sound Mode

You can set the sound mode by pressing the “DUAL” button. When you press it, the current sound mode is displayed on the

screen.

		Audio Type	DUAL 1/2				Default
	A2	Mono		MONO			Automatic
		Stereo	STEREO ↔ MONO				change
	Stereo
		Dual	DUAL 1 ↔ DUAL 2				DUAL 1
		Mono		MONO			Automatic
	NICAM	Stereo	MONO ↔ STEREO				change
	Stereo
		Dual	MONO ↔ DUAL 1				DUAL 1
				DUAL 2

You can also set these options simply by pressing the DUAL button on remote control.

If the stereo signal is weak and an automatic switching occurs, then switch to the Mono. This function is only activated in stereo sound signal. It is deactivated in mono sound signal.

Setting and Displaying the Current Time

You can set the TV’s clock so that the current time is displayed when you press the INFO button. You must also set the time if you wish to use the automatic On/Off timers.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select "Time", then press the

ENTER/OK button.

TV	Mode	: Custom	
	Equalizer	Setup	
	Plug & Play	: Off	
	SRS TS XT		
	Language	: English	
	Auto Volume	: Off	
	Time	: Off	
	Internal Mute		
	Game Mode	: Off	
	Reset	: Off	
	Blue Screen
	Melody	: Off	
	PC	: Off	
	Home Theatre PC		
	Light Effect	: In Watching TV 
	Move	Enter	Return
	More
	Move	Enter	Return

3. Press the ENTER/OK button to select "Clock Set".

	4.
		To...	Press the...
		Move to Month, Day, Year, Hour or Minute	◄ or ► button.
		Set the Month, Day, Year, Hour or Minute	▲ or ▼ button.
		Confirm the setting	ENTER/OK button.

5.Press the EXIT button to exit.

TV	Clock Set
Month	Day	Year
p	01	2007
01
q
Hour	Minute
00	00
Move	Adjust	Return

If you disconnect the power cord, you have to set the clock again

You can also set Year, Month, Day, Hour and Minute by pressing the number buttons on the remote control.

English - 22

Setting the Sleep Timer

You can select a time period of between 30 and 180 minutes after which the television automatically switches to standby mode.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select "Time", then press the

ENTER/OK button.

3.Press the ▲ or ▼ button to select "Sleep Timer", then press the ENTER/OK button.

4.Press the ▲ or ▼ button repeatedly until the desired time appears (Off, 30, 60, 90, 120, 150, 180).

Press the ENTER/OK button.

5.Press the EXIT button to exit.

The TV automatically switches to standby mode when the timer reaches 0.

TV	Mode	: Custom	
	Equalizer	Setup	
	Plug & Play	: Off	
	SRS TS XT		
	Language	:English	
	Auto Volume	: Off	
	Time	: Off	
	Internal Mute		
	Game Mode	:Off	
	Reset	:Off	
	Blue Screen
	Melody	:Off	
	PC	: Off	
	Home Theatre PC		
	Light Effect	: In Watching TV
	Move	Enter	Return
	More
	Move	Enter	Return

	TV	Time
	Clock Set	:	Off
	Sleep Timer	:	30
	Timer 1	:	60
	Timer 2	:	90
			120
	Timer 3	:
			150
			180
	Move	Enter	Return

Switching the Television On and Off Automatically

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select "Time", then press the

ENTER/OK button.

3.Press the ▲ or ▼ button to select "Timer 1", "Timer 2",

"Timer 3", then press the ENTER/OK button.

You must set the clock first.

4.Press the ◄ or ► button to select the required item below. Press the ▲ or ▼ button to adjust to the setting satisfied.

♦On Time : Select hour, minute, and "Yes"/"No". (To activate timer with the setting satisfied, set to "Yes".)

♦Off Time : Select hour, minute, and "Yes"/"No". (To activate timer with the setting satisfied, set to "Yes".)

♦Repeat : Select "Once", "Everyday", "Mon~Fri", "Mon~Sat", or "Sat~Sun".

♦Volume : Select the required volume level.

TV	Mode	: Custom	
	Equalizer	Setup	
	Plug & Play	: Off	
	SRS TS XT		
	Language	:English	
	Auto Volume	: Off	
	Time	: Off	
	Internal Mute		
	Game Mode	:Off	
	Reset	:Off	
	Blue Screen
	Melody	:Off	
	PC	: Off	
	Home Theatre PC		
	Light Effect	: In Watching TV
	Move	Enter	Return
	More
	Move	Enter	Return
TV		Timer 1

On Time
5			:			No
	00				00
	6
Off Time
00		:			00	No
Repeat						Volume
		Once				10
	► Move					Adjust	Return

You can set the hour, minute, and channel directly by pressing the number buttons on the remote control.

Auto Power Off

When you set the timer “On”, the TV will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by timer. This function is only available in timer “On” mode and prevents overheating, which may occur if a TV is on for too long time.

English - 23

Choosing Your Language

When you start using your set for the first time, you must select the language which will be used for displaying menus and indications.

1.Press the MENU button to display the on-screen menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select "Language", then press the ENTER/OK button.

3.Select a particular language by pressing the ▲ or ▼ button repeatedly.

Press the ENTER/OK button.

4.Press the EXIT button to exit.

TV	Mode	: Custom	
	Equalizer	Setup	
	Plug & Play	: Off	
	SRS TS XT		
	Language	: English	
	Auto Volume	: Off	
	Time	: Off	
	Internal Mute		
	Game Mode	: Off	
	Reset	: Off	
	Blue Screen
	Melody	: Off	
	PC	: Off	
	Home Theatre PC		
	Light Effect	: In Watching TV 
	Move	Enter	Return
	More
	Move	Enter	Return

TV	Mode	: Custom			
	Equalizer	Setup			
	Plug & Play	: Off			
	SRS TS XT
	Language	: EnglishEnglish			
	Auto Volume	: Off
	Time	Deutsch			
	Internal Mute	: Off
	Game Mode	: OffFrançais
	Reset	: OffItaliano
	Blue Screen
	Melody	: OffEspañol
	PC	Nederlands
	Home Theatre PC	: Off	q
	Light Effect	: In Watching TV
	Move	Enter		Return
	More
	Move	Enter		Return

Upgrading the Software

Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center to receive information about downloading upgrades and using a USB

drive. Upgrades will be possible by connecting a USB drive to the USB port located on located on the side of your TV.

1.Insert a USB drive containing the firmware upgrade into the WISELINK port on the side of the TV.

2.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER/OK button.

3.Press the ▲ or ▼ button to select "SW Upgrade", then press the ENTER/OK button.

4.Press the ENTER/OK button.

The message "Scanning for USB... It may take up to 30 seconds." is displayed. Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will shut off and turn on automatically after completing the firmware upgrade. Please check the firmware version after the upgrades are complete.

TV Side Panel

USB Drive

TV						Setup
			More
			Wall-Mount Adjustment				
			Energy Saving			: Off	
			HDMI Black Level			: Low	
			PIP				
			SW Upgrade				
				Move		Enter	Return

TV	SW Upgrade
USB		
	Enter	Return

SW Upgrade

Scanning for USB...

It may take up to 30 seconds.

English - 24

Game Mode/ Blue Screen / Melody / Light Effect / Energy Saving / HDMI Black Level

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Setup", then press the

ENTER/OK button.

2.Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.

Available options: Game Mode, Blue Screen, Melody, Light

Effect, Energy Saving, HDMI Black Level

3.When you are satisfied with your setting, press the

ENTER/OK button.

4.Press the EXIT button to exit.

♦Game Mode: Off/On

When connecting to a game console such as PlayStation™ or Xbox™, you can enjoy a more realistic gaming experience by selecting game menu.

To disconnect the game console and connect another external device, cancel game mode in the setup menu.

If you display the TV menu in Game mode, the screen shakes slightly.

"Game Mode" is not available in TV mode.

If Game Mode is On:

TV	Mode	: Custom	
	Equalizer	Setup	
	Plug & Play	: Off	
	SRS TS XT		
	Language	:English	
	Auto Volume	: Off	
	Time	: Off	
	Internal Mute		
	Game Mode	:Off	
	Reset	:Off	
	Blue Screen
	Melody	:Off	
	PC	:Off	
	Home Theatre PC		
	Light Effect	: In Watching TV 
	Move	Enter	Return
	More
	Move	Enter	Return
TV		Setup
	More
	Wall-Mount Adjustment		
	Energy Saving	: Off	
	HDMI Black Level	: Low	
	PIP
	SW Upgrade		
	Move	Enter	Return

•Picture Mode changes to "Standard" and Sound Mode changes to "Custom" automatically. The user cannot change these to other modes.

•Sound Mode in the Sound menu is deactivated. Adjust the sound using the equalizer.

•The Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults.

♦Blue Screen: Off/On

If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the Blue Screen to Off.

♦Melody: Off/Low/Medium/High

The TV power on/off melody sound can be adjusted.

♦Light Effect: Off/In Standby/In Watching TV/Always

You can turn on/off the LED on the front of TV according to the situation. Use it for saving power or when the LED dazzles your eyes.

−Off: LED will not come on.

−In Standby: Turns the LED on in standby mode.

−In Watching TV: Turns the LED on while watching TV.

−Always: LED will come on after you turn the TV off.

Set the Light Effect to Off to reduce the power consumption.

♦Energy Saving: Off/Low/Medium/High/Auto

This feature adjusts the screen brightness depending on the surrounding lighting conditions.

−Off: Switches off the Energy Saving mode.

−Low: Operates in standard mode regardless of the surrounding illumination.

−Medium: Enters Medium power saving mode regardless of the surrounding illumination.

−High: Enters maximum power saving mode regardless of the surrounding illumination.

♦HDMI Black Level: Normal/Low

You can directly select the black level on the screen to adjust the screen depth.

This function is active only when the external input connects to HDMI(RGB signals).

English - 25

Selecting the Source

You can select among external sources connected to your TV’s input jacks.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Input", then press the

ENTER/OK button.

2.Press the ENTER/OK button again, to select "Source List".

When no external device is connected to your

set, only "TV", "Ext.1", "Ext.2", "DTV" are activated in the "Source List". "AV", "S-Video", "Component", "PC", "HDMI1", "HDMI2","HDMI3" are activated only

when they are connected to your set.

3.Select the required device by pressing the ▲ or ▼ button.

Press the ENTER/OK button.

TV	Mode	: Custom	
	Equalizer	Input	
		: TV
	Source List		
	SRS TS XT	: Off	
	Edit Name	: Off	
	Auto Volume		
	Anynet+(HDMI-CEC)		
	Mute	: Off
	InternalWISEL NK
	Reset
	Move	Enter	Return
	Move	Enter	Return

TV	Mode		: Custom	
	Equalizer		Source List	
	TV		: Off	
	SRS TS XT
	Ext.1		: ----	
	Auto Volume		Off
	Ext.2		: ----
	AVInternal Mute		: ----Off	
	S-Video		: ----
	Reset		: ----
	Component
	PC		: ----
	HDMI1		: ----
	HDMI2		: ----
	HDMI3		: ----	Return
	DTV	Move	Enter
			: ----
		Move	Enter	Return

Press the SOURCE button on the remote control to toggle between all the available source.

TV mode can be selected by pressing the TV/DTV button, number buttons(0~9), and the P/ button on the remote control. But it cannot be selected using the SOURCE button.

Editing the Input Source Names

Name the device connected to the input jacks to make your input source selection easier.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Input", then press the

ENTER/OK button.

2.Press the ▲ or ▼ button to select "Edit Name", then press the ENTER/OK button.

3.Press the ▲ or ▼ button to select the device that you wish to edit.

Press the ENTER/OK button.

4.Press the ▲ or ▼ button to select the required device. Press the ENTER/OK button.

5.Press the EXIT button to exit.

When a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN 2 port, you should set the" HDMI2" mode to "PC" in the "Edit Name" of the "Input" mode.

TV	Mode	: Custom	
	Equalizer	Input	
		: TV
	Source List		
	SRS TS XT	: Off	
	Edit Name	: Off	
	Auto Volume		
	Anynet+(HDMI-CEC)		
	Mute	: Off
	InternalWISEL NK
	Reset
	Move	Enter	Return
	Move	Enter	Return

TV	Mode	: Custom		
	Equalizer	Edit Name		
		: ----	----
	Ext.1			
	SRS TS XT	: Off
	Ext.2	: ----	VCR	
	uto Volume	Off
	AV	: ----	DVD
	SInternal-Video Mute	: ----Off		
	Component	: ----D-VHS
	Reset	Cable STB
	PC	: ----
	HDMI1	: ----HD STB
	HDMI2	Satellite STB
		: ----	q
	HDMI3	: ----
	Move	Enter	Return
	Move	Enter	Return

English - 26

Previewing the DTV Menu System
♦ The company does not guarantee the normal operation of the		TV	Mode	Digital Menu
						: Custom	
DTV menu for countries other than the supported countries			Equalizer				
			Guide			: Off	
(France, Germany, Italy, Netherlands, Spain, Switzerland,			SRS TS XT
			AutoChannelVolume			: Off	
United Kingdom, Austria, Sweden, Finland) because only these			SetupInternal Mute			: Off	
country standards are supported.			Reset
			Language
In addition, when the country of the broadcast stream differs
from the country selected by the current user, the string
appearing in the channel banner, Info, Guide, Channel			Move		Enter		Return
Manager, etc. may not be displayed properly.			Move			Enter	Exit
♦ Available in DTV mode. Preset to the DTV mode by using the			Mode			: Custom	
TV/DTV button on your remote control. To help you navigate			Equalizer			Guide	
around the on-screen menu system and adjust the various			Now & Next Guide				
			SRS TS XT			: Off
			Full Guide			: Off	
settings available, refer to the following illustration.			Auto Volume
			Scheduled List			: Off	
			Internal Mute
Press the MENU button to display the menu.			RDesetfault Guide			: Full Guide 
Press the ▲ or ▼ button to select "Digital Menu", then press the
ENTER/OK button.			Move		Enter		Return
Guide
			Move			Enter	Exit
Now & Next Guide
Full Guide					Channel
Scheduled List			Country			:United Kingdom 
Default Guide	Now/Next, Full Guide		Auto Store				
			Manual Store				
Channel			Edit Favourite Channels				
			Channel List				
Country
Auto Store			Move		Enter		Return
Manual Store			Move			Enter	Exit
Edit Favourite Channels
						Setup
Channel List	All, Favourites, Default
			Menu Transparency			: Medium	
Setup
			Change PIN				
Menu Transparency	High, Medium, Low, Opaque		Parental Lock				
			Subtitle			: On	
Change PIN			Subtitle Mode			: Normal	
Parental Lock			
Subtitle	Off, On		Move		Enter		Return
Subtitle Mode	Normal, Hard of hearing		Move			Enter	Exit
Audio Format	PCM, Dolby Digital
Digital Text	Disable, Enable				Language
Time Zone			Audio Language
System	Product Information		Subtitle Language
			Teletext Language
	Signal Information
			Preference				
	Software Upgrade

Common Interface

				Reset	Move	Enter	Return
					Move	Enter	Exit
		Language
		Audio Language		Primary Audio Language
		Subtitle Language
				Secondary Audio Language
		Teletext Language
				Primary Subtitle Language
		Preference
				Secondary Subtitle Language

Primary Teletext Language

Secondary Teletext Language

The sub-items of the CI Menu may vary depending on the CAM model.

English - 27

Updating the Channel List Automatically
You can update the channel list when the broadcaster		Channel
adds new Services or if you move the TV to a new	Country	:United Kingdom 
location.	Auto Store			
1. Press the MENU button to display the menu.	Manual Store			
	Edit Favourite Channels			
Press the ▲ or ▼ button to select "Digital Menu", then	Channel List			
press the ENTER/OK button.
2. Press the ▲ or ▼ button to select "Channel", then press
the ENTER/OK button.	Move	Enter	Return
3. Press the ENTER/OK button again, to select "Country".	Mode	: Custom		
4. Select the appropriate country by pressing the ▲ or ▼
	Equalizer	Auto Store		
button. Press the ENTER/OK button to confirm your choice.	SRS TS XT	: Off		
Even though you have changed the country setting	Scanning for digital services...
	Auto Volume	: Off		
in this menu, the country setting for Analog TV is not	Internal Mute	: Off		
	Reset		35%
changed.(Refer to page 10)	Services found: 24 Channel: 38

5. Press the ▲ or ▼ button again, to select "Auto Store".		Stop
Press the ENTER/OK button.
	Move	Enter		Return
When it has finished, the number of scanned services	Return
will be displayed.
The existing favourite channel list will not be deleted
when the channel list is updated.
To stop the scan before it has finished, press the ENTER/OK button with "STOP"
selected.

6.Press the EXIT button to exit.

If the signal status is poor, the "No Service found! Check the aerial connection" message is displayed.

Updating the Channel List Manually

You can specify the channel for a fast channel search.

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select "Digital Menu", then press the ENTER/OK button.

2.Press the ▲ or ▼ button to select "Channel", then press the ENTER/OK button.

3.Press the ▲ or ▼ button to select "Manual Store", then press the ENTER/OK button.

4.Press the ▲ or ▼ button to select the required option, then press the ENTER/OK button.

	Manual Store
Channel	Frequency		Bandwidth
▲
5	177500	KHz	7	MHz
▼
Search
Adjust	Return

− Channel : Channel "5" to "69" in sequence are displayed (depending on the country) − Frequency : The frequency available in the Channel group is displayed.

− Bandwidth : The available bandwidths are 7 and 8 MHz.

Press the red button to start the scan for digital services. When it has finished, channels are updated in the channel list.

5.When it has finished, the number of scanned services will be displayed.

6.Press the EXIT button to exit.

English - 28