SR32 THRU SR39
MINI SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
l For surface mounted applications
l Low profile package
l Built-in strain relief
l Metal to silicon rectifier
majority carrier conduction
l Low power loss, High efficiency
l High current capability, low V
F
l High surge capacity
l For use in low voltage high frequency inverters,
free wheeling, and polarity protection applications
l High temperature soldering guaranteed:
260 ¢J/10 seconds at terminals
Case: JEDEC DO-214AA molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes cathode
Standard packaging: 12mm tape (EIA-481)
Weight: 0.003 ounce, 0.093 gram
Ratings at 25
¢J
ambient temperature unless otherwise specified.
Resistive or inductive load.
Maximum Recurrent Peak Reverse Voltage V
Maximum RMS Voltage V
Maximum DC Blocking Voltage V
Maximum Average Forward Rectified Current
at T
(See Figure 1)
I
3.0 Amp
Peak Forward Surge Current 8.3ms single half sine-
wave superimposed on rated load(JEDEC method)
I
80 Amp
Maximum Instantaneous Forward Voltage at 3.0A
(Note 1)
V
0.50 0.70 0.85 Volts
Maximum DC Reverse Current T
A
=25¢J(Note 1)
At Rated DC Blocking Voltage T
A
=100
¢J
I
0.5
20.0
mA
Maximum Thermal Resistance (Note 2) R £KJL
R
£K
JA
17
55
¢J/
Operating Junction T emperature Range T
-50 to +125 ¢J
Storage Temperature Range T
-50 to +150 ¢J
NOTES:
Pulse T est with PW=300
£g
sec, 2% Duty Cycle.
2. Mounted on P.C.Board with 5.0mm
2
(.013mm thick) copper pad areas.