PANJIT UF152, UF1510, UF151, UF156, UF154 Datasheet

UF150 THRU UF1510

ULTRAFAST SWITCHING RECTIFIER

VOLTAGE - 50 to 1000 Volts	CURRENT - 1.5 Amperes
FEATURES	DO-15

•Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound

•Void-free Plastic in DO-15 package

•1.5 ampere operation at TA=55 ¢J with no thermal runaway

•Exceeds environmental standards of MIL-S-19500/228

•Ultra fast switching for high efficiency

MECHANICAL DATA

Case: Molded plastic, DO-15

Terminals: Axial leads, solderable per MIL-STD-202,

Method 208

Polarity: Band denotes cathode

Mounting Position: Any

Weight: 0.015 ounce, 0.4 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ¢J ambient temperature unless otherwise specified.

Single phase, half wave, 60 Hz, resistive or inductive load.

	UF150	UF151	UF152		UF154		UF156	UF158	UF1510	UNITS
Peak Reverse Voltage, Pepetitive ; VRM	50	100	200		400	600		800	1000	V
Maximum RMS Voltage	35	70	140		280	420		560	700	V
DC Blocking Voltage; VR	50	100	200		400	600		800	1000	V
Average Forward Current, Io @TA=55 ¢J 3.8”					1.5					A
lead length, 60Hz, resistive or inductive load
Peak Forward Surge Current IFM (surge)					50					A
8.3msec. single half sine-wave superimposed
on rated load (JEDEC method)
Maximum Forward Voltage VF @1.5A, 25 ¢J		1.00			1.10			1.70		V
Maximum Reverse Current, @ Rated TJ=25 ¢J					10.0					£g A
Reverse Voltage TJ=100 ¢J					500					£g A
Typical Junction capacitance (Note 1) CJ					25					PF
Typical Junction Resistance (Note 2) R £KJA					50					¢J /W
Reverse Recovery Time	50	50	50		50	75		75	75	ns
IF=.5A, IR=1A, Irr=.25A
Operating and Storage Temperature Range			-55 TO +150							¢J

NOTES:

1.Measured at 1 MHz and applied reverse voltage of 4.0 VDC

2.Thermal resistance from junction to ambient and from junction to lead length 0.375”(9.5mm) P.C.B. mounted