Panasonic TC-P55ST50, TC-P50ST50, TC-P60ST50, TC-P65ST50 User Manual

Scan, watch and discover how to get the most out of your TV

Escanee, observe y descubra como obtener el máximo de su TV

http://rd.pnaqr.com/TC-P00ST50/2/1/

Owner’s Manual

50”/55”/60”/65” Class 1080p Plasma HDTV

(49.9/55.1/60.1/64.7 inches measured diagonally)

Manual de usuario

Televisión de alta definición de 1080p y clase 50”/55”/60”/65” de Plasma

(49,9/55,1/60,1/64,7 pulgadas medidas diagonalmente)

For assistance (U.S.A./Puerto Rico), please call:

1-877-95-VIERA (958-4372) www.panasonic.com/help

For assistance (Canada), please call:

1-866-330-0014 concierge.panasonic.ca

Para solicitar ayuda (EE.UU./Puerto Rico), llame al:

1-877-95-VIERA (958-4372) www.panasonic.com/help

Model No. Número de modelo

TC-P50ST50 TC-P55ST50 TC-P60ST50 TC-P65ST50

English

Español

manual electrónico

Thank you for purchasing this Panasonic product.

Please read these instructions before operating your set and retain them for future

reference. The images shown in this manual are for illustrative purposes only.

Gracias por su decisión de comprar este producto marca Panasonic.

Lea estas instrucciones antes de utilizar su televisor y guárdelas para consultarlas en

el futuro. Las imágenes mostradas en este manual tienen solamente fines ilustrativos.

TQB2AA0649

This product incorporates the following software or technology:

(1)the software developed independently by or for Panasonic Corporation,

(2)the software owned by third party and licensed to Panasonic Corporation,

(3)the software based in part on the work of the Independent JPEG Group,

(4)the software developed by the FreeType Project,

(5)the software licensed under the GNU LESSER GENERAL PUBLIC LICENSE (LGPL) and/or,

(6)open sourced software other than the software licensed under the LGPL.

(7)“PlayReady”(digital right management technology) licensed by Microsoft Corporation or its affiliates.

For the software categorized as (5), please refer to the terms and conditions of LGPL, as the case may be at http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html

In addition, the software categorized as (5) are copyrighted by several individuals. Please refer to the copyright notice of those individuals at http://www.am-linux.jp/dl/DTV12U/

The LGPL software is distributed in the hope that it will be useful, but

WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

At least three (3) years from delivery of products, Panasonic will give to any third party who contact us at the contact information provided below, for a charge no more than our cost of physically performing source code distribution,

a complete machine-readable copy of the corresponding source code covered under LGPL. Contact Information

[e-mail]

Source code covered under LGPL is also freely available to you and any other member of the public via our website below. http://www.am-linux.jp/dl/DTV12U/

For the software categorized as (5) and (6), please refer to the applicable license terms included in the “Setup” menu on product.

Further, for PlayReady categorized as (7), please be aware of the following.

(a)This product contains technology subject to certain intellectual property rights of Microsoft. Use or distribution of this technology outside of this product is prohibited without the appropriate license(s) from Microsoft.

(b)Content owners use Microsoft PlayReady(TM) content access technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to access PlayReady-protected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume PlayReady-protected content. Revocation should not affect unprotected content or content protected by other content access technologies.

Content owners may require you to upgrade PlayReady to access their content.

If you decline an upgrade, you will not be able to access content that requires the upgrade.

This product is licensed under the AVC patent portfolio license for the personal and non-commercial use of a consumer to

(i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal and non-commercial activity and/or was obtained from a video provider licensed to provide AVC Video. No license is granted or shall be implied for any other use. Additional information may be obtained from MPEG LA, LLC.

See http://www.mpegla.com.

■Do not display a still picture for a long time

This causes the image to remain on the plasma screen

(“Image retention”). This is not considered a malfunction and is not covered by the warranty.

12

4 : 3

To prevent the “Image retention”, the screen saver is automatically activated after a few minutes if no signals are sent or no operations are performed.

Typical still images

●Channel number and other logos
●Image displayed in 4:3 mode		●Computer image
●SD Card photo	●Video game

■Set up

●Do not place the unit where it’s exposed to sunlight or other bright light (including reflections).

●Use of some types of fluorescent lighting may reduce the remote control’s transmission range.

2

VIERA Link™ is a trademark of

Panasonic Corporation.

HDMI, the HDMI logo and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

SDXC Logo is a trademark of SD3C, LLC.

“AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation.

“RealD 3D” is a trademark of RealD.

“Full HD 3D Glasses™” logo and “Full HD 3D Glasses™” word are trademark of Full HD 3D Glasses Initiative.

DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living Network Alliance.

QuickTime and the QuickTime logo are trademarks or registered trademarks of Apple Inc., used under license there from.

TC-P50ST50 qualifies for ENERGY STAR in the “Home Use” setting and this is the setting in which energy savings will be achieved. Any modifications to the “Home Use” setting or other factory default settings could result in greater energy consumption beyond

levels that meet ENERGY STAR qualifications.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

HDAVI Control™ is a trademark of Panasonic Corporation.

Skype™ is a trademark of Skype limited.

Contents

Please read before using the unit

•Safety Precautions··········································4

•Accessories/Optional Accessories··················8

•Connections·················································· 11

•Identifying Controls·······································14

•First Time Setup············································15

•Viewing 3D images on TV ····························16

•Using eHELP (built-in Manual) ·····················17

•Frequently Asked Questions (FAQ) ··············18

•Care and Cleaning ·······································18

•Specifications ···············································19

•Limited Warranty

(for U.S.A. and Puerto Rico only) ·················21

•Customer Services Directory

(for U.S.A. and Puerto Rico)·························22

•Limited Warranty (for Canada) ·····················23

3

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualified service personnel.

The lightning flash with arrowhead within a triangle is intended to tell the user that parts inside the product are a risk of electric shock to persons.

The exclamation point within a triangle is intended to tell the user that important operating and servicing instructions are in the papers with the appliance.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set

(including on shelves above, etc.).

Important Safety Instructions

1)Read these instructions.

2)Keep these instructions.

3)Heed all warnings.

4)Follow all instructions.

5)Do not use this apparatus near water.

6)Clean only with dry cloth.

7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11)Only use attachments / accessories specified by the manufacturer.

12)Use only with the cart, stand, tripod,

bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.

13)Unplug this apparatus during lightning storms or when unused for long periods of time.

14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15)To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.

WARNING/CAUTION (TV set)

WARNING

Small parts can present choking hazard if accidentally swallowed.

Keep small parts away from young children. Discard unneeded small parts and other objects,

including packaging materials and plastic bags/sheets to prevent them from being played with by young children, creating the potential risk of suffocation.

■Set up

This Plasma TV may fall and can cause personal injury or even death if not installed correctly. To prevent personal injury or death, follow these warnings:

●Install the Plasma TV in accordance with the manufacturer’s recommended pedestal or stand, corresponding hardware and installation instructions.

This Plasma TV is for use only with the following optional accessories. Use with any other type of optional

accessories may cause instability. The following accessories

are manufactured by Panasonic Corporation.

•Wall-hanging bracket (Angled) TY-WK4P1RW (TC-P50ST50) TY-WK5P1RW (TC-P55ST50, TC-P60ST50) TY-WK6P1RW (TC-P65ST50)

●Be sure to ask a qualified technician to carry out the installation and set-up.

Two or more people are required to install or remove the television.

●Some wall mounts (wall-hanging brackets) are not designed to be mounted to walls with steel studs or old cinder block constructions.

Ask your dealer or licensed contractor to properly secure the wall-hanging bracket.

●Do not route the TV’s power cord inside the wall.

The power cord was not designed for in-wall mounting. Doing so can lead to fire hazard.

●Do not place the Plasma TV or its stand on a sloped or unstable surface.

The Plasma TV may fall or tip over.

●Do not support the Plasma TV on a non-specified pedestal.

●Do not place the Plasma TV on furniture that can easily be used as steps, such as a chest of drawers.

●Do not climb or allow children to climb on the Plasma TV

●Place or install the Plasma TV where it cannot be pushed, pulled over or knocked down.

●Route all cords and cables such that they cannot be tripped over or pulled by curious children.

4

●Do not place any objects on top of the Plasma TV.

If water spills onto the Plasma TV or foreign objects get inside it, a short-circuit may occur, which could result in fire or electric shock. If any foreign objects get inside the Plasma TV, please consult an Authorized Service Center.

●In the unlikely event that you receive a shock from this product, it is possible that your household outlet may be wired improperly.

Have an electrician verify that the TV’s outlet is properly wired. If the symptom persists, have the TV serviced by a qualified authorized technician.

●To prevent the spread of fire, keep candles or other open flames away from this product at all times

■AC Power Supply Cord

To prevent fire or electric shock:

●The Plasma TV is designed to operate on a 120 V AC, 60 Hz service. Insert the power cord plug as far as it will go into the wall socket.

If the plug is not fully inserted, heat may generate, which could cause a fire.

●The included power cord is for use with this unit only.

●Do not use any power cord other than that provided with this TV.

●Do not handle the power cord plug with wet hands.

●Do not do anything that might damage the power supply cord.

●When disconnecting the power supply cord, hold the plug, not the cord.

●Do not use the power supply cord if the plug or cord is damaged.

Replace the cord or contact your Authorized Service Center.

●Do not use a 3-prong to 2-prong AC plug adapters to connect your TV’s plug to the wall outlet.

Doing so will defeat the TV plug’s safety feature, which can lead to a shock hazard. If the wall outlet does not accommodate a 3-prong plug, have a qualified electrician replace your outlet and check the associated wiring.

■Handling the power supply cord

●Insert the power plug fully into the socket outlet. (If the power plug is loose, it could generate heat and cause fire.)

●Ensure that the power plug is easily accessible.

●Ensure the earth pin on the power plug is securely connected to prevent electrical shock.

•An apparatus with CLASS I construction shall be connected to a power socket outlet with a protective earthing connection.

●Do not touch the power plug with a wet hand. (This may cause electrical shock.)

●Do not use any power cord other than that provided with this TV. (This may cause fire or electrical shock.)

●Do not damage the power cord. (A damaged cord may cause fire or electrical shock.)

•Do not move the TV with the cord plugged in the socket outlet.

•Do not place a heavy object on the cord or place the cord near a high-temperature object.

•Do not twist the cord, bend it excessively, or stretch it.

•Do not pull on the cord. Hold onto the power plug body when disconnecting cord.

•Do not use a damaged power plug or socket outlet.

●If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the Plasma TV, unplug the power supply cord immediately.

Continued use of the TV under these conditions might cause a fire or permanent damage to the TV. Have the TV evaluated by an Authorized Service Center. Servicing of the TV by unauthorized personnel is strongly discouraged due to its high voltage.

●If water or an object gets inside the Plasma TV, if the Plasma TV is dropped, or if the enclosure becomes damaged, unplug the power supply cord immediately.

A short-circuit may occur, which could cause a fire. Contact an Authorized Service Center for an evaluation.

■Radio waves

●Do not place this TV in any medical institutions or locations with medical devices.

Radio waves from this TV may interfere with the medical devices and cause accidents due to the malfunction.

●Do not use this TV near any automatic control devices such as automatic doors or fire alarms.

Radio waves from this TV may interfere with the automatic control devices and cause accidents due to the malfunction.

●Keep this TV away at least 9 inches (22 cm) from the location where a cardiac pacemaker is implanted.

Radio waves from this TV may interfere with the operation of the pacemaker.

CAUTION

●Do not cover the ventilation holes.

Doing so may cause the Plasma TV to overheat, which can cause a fire or damage to the Plasma TV.

●Leave a space of 3 15/16” (10 cm) or more at the top, left and right, and 2 3/4” (7 cm) or more at the rear.

●When using the pedestal, keep the space between the bottom of the TV and the pedestal or stand surface clear from objects that may obstruct ventilation.

■When Moving the Plasma TV

●Be sure to disconnect all cables before moving the Plasma TV.

Moving the TV with its cables attached might damage the cables which, in turn, can cause fire or electric shock.

●To prevent an electric shock, disconnect the power plug from the wall outlet as a safety precaution before carrying out any cleaning.

●Transport only in upright position.

Transporting the unit with its display panel facing upright or downward may cause damage to the internal circuitry.

●Using a dry cloth, clean any dust from the power supply cord and plug regularly.

Build-up of dust on the power cord plug can increase

humidity, which might damage the insulation and cause a fire.

This Plasma TV radiates infrared rays;

therefore, it may affect other infrared communication equipment. Install your infrared sensor in a place away from direct or reflected light from your Plasma TV.

The TV will still consume some power as long as the power supply cord is connected to the wall outlet.

●Display panel is made of glass. Do not apply strong force or impact to the display panel.

This may cause damage resulting in injury.

●The TV is heavy. TV should be handled by 2 or more people. Support as shown to avoid injury by the TV tipping or falling.

5

WARNING/CAUTION (3D Eyewear)

WARNING

■Accidental Ingestion

●Keep 3D Eyewear parts in places out of the reach of children.

There is a danger small children could swallow such parts by mistake.

•If a child accidentally swallows such parts, seek immediate medical attention.

■Place

●Do not use 3D Eyewear in hospital or other medical facilities.

Radio waves from 3D Eyewear may cause interference of medical equipments.

●Do not use 3D Eyewear nearby automatic control equipments, like an automatic door, a fire alarm apparatus, etc.

Radio waves from 3D Eyewear may cause interference of automatic control equipments.

●Keep 3D Eyewear more than 9 inches (22 cm) away from the implant of cardiac pacemaker, or similar implantable medical equipments, at all times.

Radio waves from 3D Eyewear may affect implantable cardiac pacemaker or similar equipment operations.

■Disassembly

●Do not disassemble or modify the 3D Eyewear.

CAUTION

■3D Eyewear

●Handle the 3D Eyewear carefully and store in the case when not in use.

Failure to do so may damage the Eyewear and glass section, which may result in injury.

●Handle the tips of the frame carefully when putting on the 3D Eyewear as inserting the tip of the frame into the eye may cause injury.

●Be careful not to close the hinge section of the 3D Eyewear on your finger.

Doing so may result in injury.

•Provide supervision when children are using this product.

■Use of 3D Eyewear

●Parents/guardians should monitor children’s viewing habits to avoid their prolonged use without rest periods.

●In commercial application and public viewing, someone in authority should convey the precautions and monitor the user of the 3D Eyewear.

●Use only the 3D Eyewear recommended for this TV.

●Only use the 3D Eyewear for its intended 3D content viewing purpose.

●Do not move around while wearing the 3D Eyewear.

The surrounding area appears dark, which may result in falling or other accidents that may cause injury.

●Inspect the 3D Eyewear for damage before each use.

■Viewing of 3D Images

●In the event that you experience dizziness, nausea, or other discomfort while viewing 3D images, discontinue use and rest your eyes.

•When you set the effect by using “3D adjustment”, take into account that the vision of 3D images varies among different individuals.

●Do not use if the 3D Eyewear is cracked or broken.

●Content for 3D viewing includes commercially available Blu-ray discs, 3D broadcasts, etc.

●When preparing your own 3D content, ensure that it is properly produced.

CEA CHILD SAFETY NOTICES

WARNING

Flat panel displays are not always supported on the proper stands or installed according to the manufacturer’s recommendations. Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, or carts may fall over and may cause personal injury or even death.

The consumer electronics industry (of which Panasonic is a member) is committed to making home entertainment enjoyable and safe. To prevent personal injury or death, be sure to follow the following safety guidelines:

TUNE INTO SAFETY:

•	One size does NOT fit all. Follow the manufacturer’s
	recommendations for the safe installation and use of your
	flat panel display.
•	Carefully read and understand all enclosed instructions for
	proper use of this product.
•	Don’t allow children to climb on or play with furniture and
	television sets.
•	Don’t place flat panel displays on furniture that can easily be
	used as steps, such as a chest of drawers.
•	Remember that children can become excited while watching
	a program, especially on “larger than life” flat panel
	displays. Care should be taken to install the display where it
	cannot be pushed, pulled over, or knocked down.
•	Care should be taken to route all cords and cables
	connected to the flat panel display so that they cannot be
6	pulled or grabbed by curious children.

WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:

•Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such as UL, CSA, ETL).

•Follow all instructions supplied by the display and wall mount manufacturers.

•If you have any doubts about your ability to safely install your flat panel display, contact your retailer about professional installation.

•Make sure the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be mounted to walls with steel studs or old cinder block

construction. If you are unsure, contact a professional installer.

•A minimum of two people are required for installation. Flat panel displays can be heavy.

Panasonic recommends that a qualified installer perform the wall-mount installation. See page 4.

The American Academy of Pediatrics discourages media viewing for children younger than two years. For more details, see, visit www.aap.org.

FCC and IC STATEMENT

This equipment has been tested and found to comply with the limits for an Other Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the Panasonic Service Center or an experienced radio/TV technician for help.

FCC Caution:

To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to peripheral devices. Any changes or modifications not expressly approved by Panasonic Corp. of North America could void the user’s authority to operate this device.

FCC and Industry Canada (IC) RF Exposure Warning :

•This TV is provided with two USB ports on rear enclosure for exclusive dedicated use for insertion of the following optional transmitters: (1) Wireless LAN Adapter with FCC ID:H8N-WLU5150/IC ID:1353A-WLU5150; and (2) Bluetooth Adapter with FCC ID:NKR-DBUBP207/IC ID:4441A-DBUBP207.

•Other transmitters shall not be used, unless specifically recommended when they become available. Other thirdparty wireless transmitters have not been RF exposure evaluated for use with this TV and may not comply with FCC and IC RF exposure requirements.

•The above two described transmitters comply with FCC and IC radiation exposure limits set forth for an uncontrolled environment for mobile use with minimum 8 inches (20 cm) spacing requirement between transmitters and all person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation.

<Only for Wi-Fi if capable of transmission in the 5.15 ~ 5.25 GHz frequency band>

This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range.

FCC and IC require this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product.

Responsible Party:	Panasonic Corporation of North America
	One Panasonic Way, Secaucus, NJ 07094
Contact Source:	Panasonic Consumer Marketing Company of North America
	1-877-95-VIERA (958-4372)
email:	[e-mail]

This device complies with Part 15 of the FCC Rules and all applicable IC RSS standards. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

■About built-in wireless LAN/Bluetooth

●To use the built-in wireless LAN, an access point needs to be obtained.

●Do not use the built-in wireless LAN to connect to any wireless network (SSID*1) for which you do not have usage rights. Such networks may be listed as a result of searches. However, using them may be regarded as illegal access.

●Check that the Access point supports WPS*2.

(If it does not support WPS, the encryption key of the Access point is required when configuring settings.)

●Follow the instructions on the Access point setup screen and configure the appropriate security settings. For more details on setting of Access point, please refer to operating manual for the Access point.

●We recommend using 11n (5 GHz) for the wireless system between the built-in wireless LAN and Access point. Communication is also possible with 11a, 11b, and 11g (2.4 GHz), but the communication speed may be slower.

●If the wireless system of the Access point is changed, devices that could connect by wireless LAN may no longer be able to connect.

●Data transmitted and received over radio waves may be intercepted and monitored.

●Keep the TV away from the following devices as much as possible:

Wireless LAN, microwaves, and other devices that use 2.4 GHz and 5 GHz signals. Otherwise, the TV failures such as malfunction may occur due to the radio wave interference.

●When noises occur due to the static electricity, etc., the TV might stop operating for the protection of the devices. In this case, turn the TV Off with power On / Off switch, then turn it On again.

*1 SSID is a name for identifying a particular wireless network for transmission. *2 WPS: Wi-Fi Protected Setup

7

Accessories/Optional Accessories

Accessories

Check you have all the items shown.

Accessories

Remote Control	Batteries for the	Cable clamper
Transmitter	Remote Control
N2QAYB000703	Transmitter (2)
	AA Battery	Power cord
Owner’s Manual	Component/AV adapter (p. 11)	Pedestal
Quick start guide	K2KYYYY00199
Child safety
Product Registration Card (U.S.A.)		How to assemble
		(p. 9)

Optional Accessories

3D Eyewear

(Rechargeable type)

●TY-ER3D4SU

●TY-ER3D4MU

Communication Camera

●TY-CC20W

Please contact your nearest Panasonic dealer to purchase the recommended Optional accessories. For additional details, please refer to the Optional accessories installation manual.

•Use Panasonic 3D Eyewear supporting Bluetooth wireless technology.

•Product information (Model No. and release date etc.) is subject to change without notice.

•For more product information

(USA) http://www.panasonic.com (Canada) http://panasonic.ca (Global reference) http://panasonic.net/avc/viera/3d/

•This camera can be used with VIERA Connect.

•It is recommended to connect the communication camera directly to the TV’s USB2 ports.

•For details, read the manual for the Communication Camera.

Wall-hanging bracket	●TY-WK5P1RW (for 55”/60”)	Rear of the TV
●TY-WK4P1RW (for 50”)		a	Screw for attaching the TV to the wall-
The angle of wall-hanging	The angle of wall-hanging		hanging bracket (not supplied with the TV)
		b		Depth of screw:
bracket can be adjusted in	bracket can be adjusted in
“zero tilting (vertical)” and “5	“zero tilting (vertical)” and “5,			minimum
				0.39” (10.0 mm) (50”/55”),
or 10-degree tilting” for this TV.	10, 15 or 20-degree tilting” for		M8
				0.67” (17.0 mm) (60”/65”)
	this TV.
		Holes for wall-hanging		maximum
	●TY-WK6P1RW (for 65”)			0.63” (16.0 mm) (50”/55”),
		bracket installation
			(View from the side)	0.91” (23.0 mm) (60”/65”)
	The angle of wall-hanging	a: 15.7” (400 mm) (50”)
	bracket can be adjusted in
	“zero tilting (vertical)” and “5 or	19.7” (500 mm) (55”/60”)
(Image)	10-degree tilting” for this TV.	26.9” (684 mm) (65”)
		b: 11.8” (300 mm)

Warning

●In order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or a licensed contractor to secure the wall-hanging brackets.

●Carefully read the instructions accompanying optional accessories, and be absolutely sure to take steps to prevent the TV from tipping over.

●Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.

●Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the wall before hanging the bracket.

●When using the angled-type wall-hanging bracket, please ensure that there is sufficient space for the connecting cables not to press against the wall when the TV is tilted forward.

●For safety reasons, remove units no longer being used from their wall-mounted locations.

8

Attaching the pedestal to TV

■Assembling the pedestal

Insert the protrusion of the Neck	Turn the stand over and fix stand neck
into the Base firmly.	securely with assembly screws.
	(for 50”: 3 screws, for 55”/60”/65”: 4 screws)
	• Do not hold the neck when turning over the stand.

Accessories

Assembly screws

A

Neck	B	x 3 pcs. (for 50”)
Protrusion of the	B	x 4 pcs. (for 55”/60”/65”)
Neck (bottom)		[TC-P50ST50]

	Hole for
Front	screw

XYN4+F10FNK (Black)

size (M4 x 10)

(for 50” (5), for 55”/60”/65” (1))

B

XYN5+F16FN (silver) size (M5 x 16)

(for 50” (7), for 55”/60”/65” (12))

		Front	Back of Stand	Bracket (1)
				TBL5ZA3157 (for 50”)
			[TC-P55ST50,	TBL5ZA3200 (for 55”/60”/65”)
	Attach the Bracket to the protrusion of Neck.		TC-P60ST50, TC-P65ST50]
			Attach the cover and fix securely with
	Make sure that the bracket is anchored		assembly screw.
	before fixing the screws.		A x 1 pcs.	Neck (1)
	Fix securely with assembly screws (4 screws)
				TXFBL5Z0063 (for 50”)
	Protrusion of Neck (top)	B x 4 pcs.	Cover	TXFBL5Z0064 (for 55”/60”/65”)
	Bracket

Cover (1)

TXFBL5Z0049 (for 50”)

TXFBL5Z0056 (for 55”/60”/65”)

■Set-up

Tighten assembly screws (for 50”)/ (for 55”/60”/65”) (total 4 screws)

loosely at first, then tighten them firmly to fix securely.	Cover is in the same bag
	with Owner’s Manual
	Base (1)

TBL5ZX0311 (for 50”)

TBL5ZX0344 (for 55”)

Rear side TBL5ZX0378 (for 60”)

TBL5ZX0380 (for 65”)

	Arrow	Removing the pedestal from the TV
	mark
	Hole for pedestal	Be sure to remove the pedestal in the following way when
	installation	using the wall-hanging bracket or repacking the TV.
	A x 4 pcs. (for 50”)	Remove the assembly screws	(for 50”)/
	B x 4 pcs. (for 55”/60”/65”)	(for 55”/60”/65”) from the TV.
	Bracket	Lift the TV from the pedestal.
		Remove the assembly screw	from the cover.
	Base
		Pull out the cover.
	(Image) Work on a flat surface	Remove the assembly screws	from the Bracket.
		Remove the assembly screws	from the Back of

stand and pull out the neck.

Warning

Do not disassemble or modify the pedestal.

Otherwise, the TV may fall over and become damaged, and personal injury may result.

Caution

Do not use any pedestal other than that provided with this TV.

Otherwise, the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.

During set-up, make sure that all screws are securely tightened.

If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.

When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure. (Above)

Otherwise, the TV and/or pedestal may fall over and become damaged, and personal injury may result.	9