Panasonic
Portable Stereo Component System
RX-DT600
-i
Before connecting, operating or adjusting this product, please read |
nCOMRftCT |
|
[O]D§(B |
||
these instructions completely. |
||
|
memLAumo |
RQT2617-L
Thank you for purchasing this product.
For optimum performance and safety, please read these operating instructions carefully.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOIS TURE.
|
TableofCenters |
Before use |
|
Precautions....................................................................... |
3 |
Supplied Accessory ......................................................... |
3 |
Power Sources................................................................. |
4 |
Location of Controls.......................................................... |
6 |
Common Operations ........................................................ |
9 |
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORM ANCE OF PROCEDURES OTHER THAN THOSE SPECI FIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOUR SELF. REFER SERVICING TO QUALIFIED PERSONNEL.
DANGEft-Invisitrie laser radiation when open and htteilock defeated. AVOID DIRECT EX POSURE TO BEAM.
(Inaid» of product)
Listening |
|
Listening to the Radio .............................................. |
10 |
Listening to CDs........................................................ |
11 |
Listening to Tapes .................................................... |
14 |
Recording |
|
Recording Compact Discs........................................ |
15 |
Recording Radio Programs...................................... |
16 |
Recording Tape to Tape............................................ |
17 |
General Information |
|
Concerning Compact Discs ............................................ |
18 |
Concerning Cassette Tapes............................................ |
18 |
Troubleshooting Guide.................................................... |
19 |
Maintenance.......................................................... |
Back cover |
Technical Specifications........................................ |
Back cover |
•It the set is not used for a long period of time or Is used oniy from an AC power source, remove ail the batteries to prevent potential damage due to possible battery leakage.
•Avoid using or placing this unit near sources of heat. Do not leave 0 it in an automobile exposed to direct sunlight for a long time with the doors and windows closed as this may deform the cabinet. •Avoid cuts, scratches, or poor connections in the AC power cord,
as they may result in possible fire or electric shock hazard. Also, excessive bending, pulling or splicing of the cord should be avoided.
•Do not unplug the AC power cord by pulling on the cord. To do so may cause premature failure or shock hazard.
•Do not operate the set on AC power in a bathroom, as a potential shock hazard may result.
•When not in use, disconnect the AC power cord from the house hold AC outlet.
•The Function Selector switch does not separate entire unit from mains even if in “TAPE/feM J ’’ position.
Please check and identify the supplied acces sory.
|
.... : |
|
: •> ' |
To operate on AC power |
To operate on battery power |
Connect the included AC power cord to the AC socket of the unit andBattery installation your household AC outlet.
Unplug the AC power cord from the household AC outlet and the AC socket of the unit.
Insert eight R20/LR20 (UM-1, not included) batteries into the battery compartment, making sure that the batteries are installed in the designated numerical order and that the proper polarities are main tained.
jffYtil |
4 m |
—d
k
Outer row @ ij 7 K 8 K 6 ) ©
©CDCD® ©
Inner row |
© |
© |
•Batteries installed with incorrect polarities may leak and damage this unit,
•Do not mix batteries (old and new) or types (manganese and alkaline, etc.).
• If the unit is not used for a long period of time or is used only from an AC power source, remove the batteries to prevent potential damage from possible battery leakage.
Battery removal
Remove as shown in the figure below.
Battery life
When the OPERATION/BATT indicator goes off (or dims) during play, replace all the batteries with new ones.
OPERATION^ATT O
This unit can be used as a one-piece portable stereo radio cassette recorder, or a three-piece component system, by attaching or de taching the speaker system.
Before attaching or detaching the speakers, be sure to disconnect the speaker cables from the speaker terminals. Be sure to set SELECTOR to TAPE/ gridJ to turn off the unit before connecting/ disconnecting the speaker cabies.
Detaching the speakers
Unlock the speaker release levers by pulling them in the direction shown below, and slide each speaker up.
Connect the speaker cables to the speaker terminals.
Attaching the speakers
Align the speaker with the main unit as shown in the figure, interlock the grooves and press down.
Connect the speaker cable (black) to the © (negative) speaker terminal, and the other speaker cable (red) to the © (positive)
When using the unit with the speakers attached, wind the speaker cabies as shown.
Since a strong magnet is used for the speaker, keep magnetized commuter passes, tickets or personal credit cards, recorded tapes, watches, etc. away from the set. The speaker magnet in the set may damage them.
@ ( 5 ) ® ® ® ® ®
© ®
Basic controls |
|
Tuner controls |
|
|
|
|
|
No. Name |
Ref. page |
No. Name |
Ref. page |
0 Speakers (Tweeter) |
5 |
(Q) Band selector (BAND) |
10 |
@ Speakers (Woofer) |
5 |
@ Tuning control (TUNING) |
10 |
|
|
|
|
@ Headphones jack (PHONES) |
|
|
|
0 Function selector (SELECTOR) |
|
|
|
0 Operation/battery check indicator |
|
|
|
(OPERATION/BATT) |
|
|
|
® Edit recording speed/beat proof |
|
|
|
selector (EDITING/B.P) |
16,17 |
|
|
® Display section
Graphic equalizer control (GRAPHIC EQUALIZER)
Extra bass system controls (XBS LEVEL)
0 Volume control (VOLUME)