Logitech UE Air Speaker Quick Start Manual

Air Speaker
Getting started with Première utilisation Logitech UE™ Air Speaker
Wireless speaker with AirPlay
for iPad, iPhone, iPod touch and iTunes
Logitech UE Air Speaker
Air Speaker
Getting started with Première utilisation Logitech UE™ Air Speaker
Wireless speaker with AirPlay
Logitech UE Air Speaker
English. . . . . . . . . . . . . . . . . . . 4
Français . . . . . . . . . . . . . . . . . . 9
www.logitech.com/support  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Español . . . . . . . . . . . . . . . . . . 14
Logitech UE Air Speaker
2 3 4 5
6 7 8
1. Status indicator Green: Normal operation Orange: Network or firmware issue
2. Ethernet port Connector for direct connection to a network. Visit www.logitech.com/support/ airspeaker for setup instructions using an Ethernet cable
3. Wi-Fi Connect button For use with computer setup (optional)
4. Auxiliary input 3.5mm audio input for other music devices (optional)
5. AC power input
6. Mute Press to mute and unmute.
7. Volume Turn clockwise to increase
volume and counterclockwise to decrease volume.
8. Power Press to turn on the speaker. While the speaker is on, press to sleep. Press again to wake. Press and hold for 5 seconds to turn o the speaker. (Power-on takes 35 seconds.)
44  English
Set up AirPlay using an iOS device (preferred)
Logitech UE Air Speaker
1. Connect the AC power supply and turn on the speaker. The speaker powers up in 35 seconds.
2. Press to open the device dock. Do not dock your iOS device while the speaker is powering up.
3. Make sure your iOS device is connected to
the same Wi-Fi network on which you want to operate the speaker.
2 3 4 5
4. Dock your iOS device after the speaker powers up. A notification will appear on your screen. Select Yes to install the Logitech UE Air app.
5. Keep your iOS device docked, launch the APP, and then follow the on-screen instructions. Be ready to enter your Wi-Fi network password.
When the Status indicator turns solid green, the Wi-Fi network connection is made.
5English  5
Logitech UE Air Speaker
Set up AirPlay using acomputer (optional)
1. Connect the AC power supply. Turn on the speaker. Wait until power- on finishes before proceeding. (Power-on takes 35 seconds.)
2. Press and hold the Wi-Fi Connect button for more than 5 seconds. After 35 seconds the Status indicator changes from slow blinking green to fast blinking green to indicate that setup mode is ready.
3. Open Wi-Fi network settings on your computer. Select the network called “Air Speaker Setup”. (For Wi-Fi help refer to your computer documentation.)
4. Launch an Internet browser. Enter in the address bar. A configuration page launches.
5. Follow the on-screen instructions. Be ready to select your Wi-Fi network and to enter your password. The speaker will restart. The Status indicator will turn solid green after the Wi-Fi connection is made.
Your computer should automatically reconnect to your Wi-Fi network. If not, you will need to reconnect it manually.
Note: If the Status indicator changes to slow blinking orange, the speaker did not connect to your Wi-Fi network. Please visit www.logitech.com/support/airspeaker for help and try again.
Playing music
The speaker plays music from only one device at a time. To switch devices, stop the current device before playing music on another device.
AirPlay with iOS device (wireless)
1. Make sure Wi-Fi is turned on for your iOS device and your iOS device is connected to the same network as the Air Speaker
2. Tap the iPod app or a music app.
3. Find the AirPlay icon and tap it.
4. Choose the Air Speaker from the list
of speakers.
5. Select a song or track to play it.
You can also dock your iOS device.
66  English
+ 14 hidden pages