LG OLED55C8PSA, OLED55C8PDA, OLED65C8PDA user manuals [es]

Safety and Reference

Please read this manual carefully before operating your TV and retain it for future reference.

OLED77C8PSA	OLED65B8SSB	OLED55B8SSB
OLED77C8PDA	OLED65B8SDB	OLED55C8PSA
	OLED65C8PSA	OLED55C8PDA
	OLED65C8PDA	OLED55E8PSA
	OLED65E8PSA	OLED55E8PDA
	OLED65E8PDA

*MFL70340802* www.lg.com

(1802-REV02)

Copyright 2018 LG Electronics Inc. All Rights Reserved.

<![if ! IE]>

<![endif]>ENGLISH

Important Safety Instruction

•• Read these instructions.

•• Keep these instructions.

•• Heed all warnings.

•• Follow all instructions.

•• Do not use this apparatus near water.

•• Clean only with dry cloth.

•• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

•• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

•• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

•• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

•• Only use attachments/accessories specified by the manufacturer.

•• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

•• Unplug this apparatus during lightning storms or when unused for long periods of time.

•• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

2

Warning! Safety Instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s

enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the device.

WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

•• TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

•• Do not place the TV and/or remote control in the following environments:

-- Keep the product away from direct sunlight.

-- An area with high humidity such as a bathroom

-- Near any heat source such as stoves and other devices that produce heat.

-- Near kitchen counters or humidifiers where they can easily be exposed to steam or oil.

-- An area exposed to rain or wind.

-- Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g., on shelves above the unit).

-- Near flammable objects such as gasoline or candles, or expose the TV to direct air conditioning.

-- Do not install in excessively dusty places.

Otherwise, this may result in fire, electric shock, combustion/ explosion, malfunction or product deformation.

•• Ventilation

-- Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase.

-- Do not install the product on a carpet or cushion.

-- Do not block or cover the product with cloth or other materials while unit is plugged in.

•• Take care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot.

•• Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the device.

•• Do not move the TV whilst the Power cord is plugged in.

•• Do not use a damaged or loosely fitting power cord.

•• Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

•• Do not connect too many devices to the same AC power outlet as this could result in fire or electric shock.

•• Disconnecting the Device from the Main Power

-- The power plug is the disconnecting device. In case of an emergency, the power plug must remain readily accessible.

•• Do not let your children climb or cling onto the TV. Otherwise, the TV may fall over, which may cause serious injury.

•• Outdoor Antenna Grounding (Can differ by country):

-- If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur.

Be sure the antenna system is grounded to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

<![if ! IE]>

<![endif]>ENGLISH

3

<![if ! IE]>

<![endif]>ENGLISH

•• Grounding (Except for devices which are not grounded.)

-- TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet. Ensure that you connect the earth ground wire to prevent possible electric shock.

•• Never touch this apparatus or antenna during a lightning storm. You may be electrocuted.

•• Make sure the power cord is connected securely to the TV and wall socket if not secured damage to the Plug and socket may occur and in extreme cases a fire may break out.

•• Do not insert metallic or inflammable objects into the product. If a foreign object is dropped into the product, unplug the power cord and contact the customer service.

•• Do not touch the end of the power cord while it is plugged in. You may be electrocuted.

•• If any of the following occur, unplug the product immediately and contact your local customer service.

-- The product has been damaged.

-- If water or another substance enters the product (like an AC adapter, power cord, or TV).

-- If you smell smoke or other odors coming from the TV

-- When lightning storms or when unused for long periods of time.

Even the TV is turned off by remote control or button, AC power source is connected to the unit if not unplugged in.

•• Do not use high voltage electrical equipment near the TV (e.g., a bug zapper). This may result in product malfunction.

•• Do not attempt to modify this product in any way without written authorization from LG Electronics. Accidental fire or electric shock can occur. Contact your local customer service for service or repair. Unauthorized modification could void the user’s authority to operate this product.

•• Use only an authorized attachments / accessories approved by LG Electronics. Otherwise, this may result in fire, electric shock, malfunction, or product damage.

•• Never disassemble the AC adapter or power cord. This may result in fire or electric shock.

•• Handle the adapter carefully to avoid dropping or striking it. An impact could damage the adapter.

•• To reduce the risk of fire or electrical shock, do not touch the TV with wet hands. If the power cord prongs are wet or covered with dust, dry the power plug completely or wipe dust off.

•• Batteries

-- Store the accessories (battery, etc.) in a safe location out of the reach of children.

-- Do not short circuit, disassemble, or allow the batteries to overheat. Do not dispose of batteries in a fire. Batteries should not be exposed to excessive heat.

•• Moving

-- When moving, make sure the product is turned off, unplugged, and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press or put stress on the front panel of the TV. Otherwise, this may result in product damage, fire hazard or injury.

•• Keep the packing anti-moisture material or vinyl packing out of the reach of children.

•• Do not allow an impact shock, any objects to fall into the product, and do not drop anything onto the screen.

•• Do not press strongly upon the panel with a hand or a sharp object such as a nail, pencil, or pen, or make a scratch on it. It may cause damage to screen.

•• Cleaning

-- When cleaning, unplug the power cord and wipe gently with a soft/dry cloth. Do not spray water or other liquids directly on the TV. Do not clean your TV with chemicals including glass cleaner, any type of air freshener, insecticide, lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol etc., which can damage the product and/or its panel. Otherwise, this may result in electric shock or product damage.

4

Preparing

•• When the TV is turned on for the first time after being shipped from the factory, initialization of the TV may take approximately one minute.

•• Image shown may differ from your TV.

•• Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

•• The available menus and options may differ from the input source or product model that you are using.

•• New features may be added to this TV in the future.

•• The device must be easily accessed to a location outlet near the access. Some devices are not made by turning on / off button, turning off the device and unplugging the power cord.

•• The items supplied with your product may vary depending upon the model.

•• Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

•• For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width.

•• Use an extension cable that supportsif the USB cable or USB flash drive does not fit into your TV’s USB port.

•• Use a certified cable with the HDMI logo attached. If you do not use a certified HDMI cable, the screen may not display or a connection error may occur.

•• Recommended HDMI cable types (3 m or less) -- High-Speed HDMI®/™ cable

-- High-Speed HDMI®/™ cable with Ethernet

	B	B	*A =< 10 mm
A	A
			=
			*B < 18 mm

•• Some models appear to have a thin film on the screen. It is actually part of the screen; do not remove it.

•• When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

•• Make sure to wring any excess water or cleaner from the cloth.

•• Do not spray water or cleaner directly onto the TV screen.

•• Make sure to spray just enough of water or cleaner onto a dry cloth to wipe the screen.

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification. Contact your dealer for buying these items. These devices work only with certain models. The model name or design may be changed due to the manufacturer’s circumstances or policies.

Magic Remote Control

(Depending upon model)

AN-MR18BA

Check whether your TV model supports Bluetooth in the Wireless Module Specification to verify whether it can be used with the Magic Remote.

Wall Mounting Bracket

(Depending upon model)

Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

Model	OLED55/65B8*
	OLED55/65C8*					OLED77C8*
	OLED55/65E8*
VESA (A x B) (mm)	300 x 200					400 x 200
Standard screw	M6					M6
Number of screws	4					4
Wall mount bracket	OLW480B					OLW480B

<![if ! IE]>

<![endif]>ENGLISH

•  Remove the bracket itself and the protective film inside it	5
when installing the wall mount. (Only OLED55/65E8*)

<![if ! IE]>

<![endif]>ENGLISH

Lifting and moving the TV

When moving or lifting the TV, read the following to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size.

•  It is recommended to move the TV in the box or packing material that the TV originally came in.

•  Before moving or lifting the TV, disconnect the power cord and all cables.

•  When holding the TV, the screen should face away from you to avoid damage.

•  Avoid touching the screen at all times, as this may result in damage to the screen.

•  Do not place the product on the floor with its front facing down without padding. Failure to do so may result in damage to the screen.

•  Do not move the TV by holding the cable holders, as the cable holders may break, and injuries and damage to the TV may occur, (Depending upon model).

•  When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

•  Hold the side and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area. (Not applicable for OLED55/65E8*)

Mounting on the Table

1 Lift and tilt the TV into its upright position on a table.

•  Leave a minimum of 10 cm space from the wall for proper ventilation.

•  Use at least two people to move a large TV.

•  When transporting the TV by hand, hold the TV as shown in the following illustration.

(Only OLED55/65E8*)

•  Hold the side of the TV with one hand, and hold the bottom of the rear cover with the other. (Hold the rear cover when placing the TV on the floor. Holding the bottom glass may result in injury.) (Only OLED55/65E8*)

•  When transporting the TV, do not expose the TV to jolts or excessive vibration.

•  When transporting the TV, keep the TV upright; never turn the TV on its side or tilt towards the left or right.

•  When handling the TV, be careful not to damage the protruding buttons.

		10 cm
		cm
	10 cm	10
		10 cm
		10 cm

(Depending upon model)

2 Connect the power cord to a wall outlet.

•  If you install the TV on a stand instead of mounting it on a wall, make sure that the removed brackets are reattached at the bottom of the TV. (Only OLED55/65E8*)

6

•  Do not apply foreign substances (oils, lubricants, etc.) to the screw parts when assembling the product. (Doing so may damage the product.)

•  If you install the TV on a stand, you need to take actions to prevent the product from overturning. Otherwise, the product may fall over, which may cause injury.

•  Do not use any unapproved items to ensure the safety and lifespan of the product.

•  Any damages or injuries by using unapproved items are not covered by the warranty.

•  Make sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)

•  Do not fasten the screws with excessive force otherwise they may strip and become loose.

Securing TV to the Wall

(Depending upon model)

1Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.

•  If there are bolts inserted at the eye-bolts position, remove the bolts first.

2Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the TV.

3Connect the eye-bolts and wall brackets tightly with a sturdy rope or cable. Make sure to keep the rope parallel to the flat surface.

•  Use a platform or cabinet that is strong and large enough to support the TV securely.

•  Brackets, bolts and ropes are optional. You can obtain additional accessories from your local dealer.

Mounting to the Wall

An optional wall mount can be used with your LG Television. Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model. Carefully attach the wall mount bracket at the rear of the TV. Install the wall mount bracket on a solid wall perpendicular to the floor. If you are attaching the TV to other building materials, please contact qualified personnel to install the wall mount. Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to connect the cables. When you do not use LG’s wall mount bracket, use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. If you are using a non-adjustable mount, attach the mount to the wall. Attach the cables to the TV first, then attach the TV to the mount.

		10 cm
		cm
	10 cm	10
		10 cm
		10 cm

(Depending upon model)

•  Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

•  For more information of screws and wall mount bracket, refer to the Separate purchase.

•  If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop.

•  When mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

•  Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to fall.

<![if ! IE]>

<![endif]>ENGLISH

7

<![if ! IE]>

<![endif]>ENGLISH

Connections

You can connect various external devices to the TV. For more information on external device’s connection, refer to the manual provided with each device.

Antenna/Cable

Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an RF cable is optional.

•• Make sure not to bend the copper wire of the RF cable.

Copper wire

•• Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.

•• To improve the picture quality in a poor signal area, purchase a signal amplifier.

•• Use a signal splitter to use 2 TVs or more.

•• If the antenna is not installed properly, contact your dealer for assistance.

•• DTV Audio Supported Codec (Depending upon country) : MPEG, AAC, HE-AAC, Dolby Digital, Dolby Digital Plus

•• This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts directly because the related standards have not been confirmed, (Depending upon model).

Other connections

Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable.

HDMI

•  Supported HDMI Audio format : (Depending upon model)

DTS (44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz),

DTS HD (44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz), True HD (48 kHz),

Dolby Digital / Dolby Digital Plus (32 kHz, 44.1 kHz, 48 kHz), PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz)

(Only UHD models)
•	)	Picture	Additional Settings

-- On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0) -- Off : Support 4K @ 50/60 Hz 8 bit (4:2:0)

If the device connected to Input Port also supports ULTRA HD Deep Color, your picture may be clearer. However, if the device doesn’t support it, it may not work properly. In that case, change the TV’s setting to off.

External Devices

Supported external devices are: Blu-ray player, HD receivers, DVD players, VCRs, audio systems, USB storage devices, PC, gaming devices, and other external devices.

•• If you record a TV program on a Blu-ray/DVD recorder or VCR, make sure to connect the TV signal input cable to the TV through a DVD recorder or VCR. For more information about recording, refer to the manual provided with the connected device.

•• The external device connections shown may differ slightly from illustrations in a manual.

•• Connect external devices to the TV regardless about the order of the TV port.

•• If you connect a gaming device to the TV, use the cable supplied with the gaming device.

•• Refer to the external equipment’s manual for operating instructions.

8

•• In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. Depending upon the graphics card, some resolution settings may not allow the image to be positioned on the screen properly.

•• Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it directly to the USB port on the TV.

•• When connecting via a wired LAN, it is recommended to use a CAT 7 cable.

Using Button

You can simply operate the TV functions, using the button.

Remote RS-232C setup

To obtain the RS-232C external control setup information, please visit www.lg.com. Download and read the manual, (Depending upon model).

•  Do not drop the product or let it fall over when connecting external devices. Otherwise, this may result in injury or damage to the product.

•  When connecting external devices such as video game consoles, make sure the connecting cables are long enough. Otherwise, the product may fall over, which may cause injury or damage the product.

Basic functions

Power On (Press)

Power Off 1 (Press and hold)

Volume Control

Channels Control

1 All running apps will close, and any recording in progress will stop.

Adjusting the menu

When the TV is turned on, press thebutton one time. You can adjust the Menu items using the button.

Turns the power off.

Accesses the settings menu.

Clears on-screen displays and returns to TV viewing.

Changes the input source.

<![if ! IE]>

<![endif]>ENGLISH

9

<![if ! IE]>

<![endif]>ENGLISH

Using Magic Remote

Control

(Depending upon model)

The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly.

When the message “Magic Remote battery is low. Please change the battery.” is displayed, replace the battery.

To install batteries, open the battery cover, replace batteries (1.5 V AA) matching theandends to the label inside the compartment, and close the battery cover. Be sure to point the magic remote toward the remote control sensor on the TV. To remove the batteries, perform the installation actions in reverse. This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.

1 2

* To use the button, press and hold for more than 3 seconds.

(POWER) Turns the TV on or off.

You can turn your set-top box on or off by adding the settop box to the universal remote control for your TV.

Number buttons Enters numbers.

(DASH) Inserts a (DASH) between numbers such as 2-1 and 2-2. Accesses the saved channels list.

(Screen Remote) Displays the Screen Remote.

-- Accesses the Universal Control Menu in some regions.

* You can access apps or Live TV using the number buttons corresponding to the features.

Adjusts the volume level. (MUTE) Mutes all sounds.

* (MUTE) Accesses the Accessibility menu.

Scrolls through the saved channels.

* (Voice recognition)

Network connection is required to use the voice recognition function. Once the voice display bar is activated on the TV screen, press and hold the button and speak your command out loud.

(HOME) Accesses the Home menu.

* (HOME) Shows the previous history. (Q. Settings) Accesses the Quick Settings.

* (Q. Settings) Displays the All Settings menu.

Wheel (OK) Press the center of the Wheel button to select a menu. You can change channels by using the wheel button.

(up/down/left/right) Press the up, down, left or right button to scroll the menu. If you pressbuttons while the pointer is in use, the pointer will disappear from the screen and Magic Remote will operate like a general remote control. To display the pointer on the screen again, shake Magic Remote to the left and right. Returns to the previous level.

* Clears on-screen displays and returns to last input viewing.

Displays the program event according to time scheduler.

1 2 Streaming Service buttons Connects to the Video Streaming Service.

(INPUT) Changes the input source.

* (INPUT) Displays a list of all the external inputs.

,	,	,	These access special functions in some menus.
* (Red Button) Runs the record function.
Control buttons ( ,			) Controls media contents.
		By zooming in on the selected area, you can view it in

full screen.

* You can zoom in on the area where the remote control is pointed.

(Some buttons and services may not be provided depending upon models or regions.)

10

Registering Magic Remote Control

How to register the Magic Remote Control

To use the Magic Remote, first pair it with your TV.

1Put batteries into the Magic Remote and turn the TV on.

2Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.

*If the TV fails to register the Magic Remote, try again after turning the TV off and back on.

How to deregister the Magic Remote Control

Press theand(HOME) buttons at the same time, for five seconds, to unpair the Magic Remote with your TV.

*Pressing and holding thebutton will let you cancel and reregister Magic Remote at the same time.

•  It is recommended that an Access Point (AP) be located more than 0.2 m away from the TV. If the AP is installed closer than 0.2 m, the Magic remote control may not perform as expected due to frequency interference.

•  Do not mix new batteries with old batteries. This may cause the batteries to overheat and leak.

•  Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire, personal injury, or ambient pollution.

•  This apparatus uses batteries. In your community there might be regulations that require you to dispose of these batteries properly due to environmental considerations. Please contact your local authorities for disposal or recycling information.

•  Batteries inside or inside the product shall not be exposed to excessive heat such as sunshine, fire or the like.

Troubleshooting

Cannot control the TV with the remote control.

•  Check if anything such as tape has been placed over the receiver. •  Check if there is any obstacle between the product and the remote

control.

•  Replace the batteries with new fresh ones. No image display and no sound is produced.

•  Check if the product is turned on.

•  Check if the power cord is connected to a wall outlet.

•  Check if there is a problem in the wall outlet by connecting other products.

The TV turns off suddenly.

•  Check the power control settings. The power supply may be interrupted.

•  Check if the auto-off function is activated in the settings menu. •  If there is no signal while the TV is on, the TV will turn off

automatically after 15 minutes of inactivity.

Abnormal Display

•  If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal; there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

•  This panel is an advanced product that contains millions of pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.

•  Displaying a still image for a prolonged period of time may cause an image sticking. Avoid displaying a fixed image on the TV screen for an extended length of time.

•  Some horizontal lines may appear when the Pixel Refresher feature is performed. It is normal and there is no need to be concerned.

<![if ! IE]>

<![endif]>ENGLISH

11

<![if ! IE]>

<![endif]>ENGLISH

Generated Sound

•  Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

•  Electrical circuit humming/panel buzzing A low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending upon the product. This generated sound does not affect the performance and reliability of the product.

•  Make sure to wring any excess water or cleaner from the cloth.

•  Do not spray water or cleaner directly onto the TV screen. •  Make sure to spray just enough of water or cleaner onto a

dry cloth to wipe the screen.

12

Specifications

Product specifications may be changed without prior notice due to upgrade of product functions. (Depending upon model)

			Broadcasting Specifications
		OLED55B8SSB, OLED65B8SSB, OLED55C8PSA,					OLED65B8SDB, OLED55C8PDA, OLED65C8PDA,
Model		OLED65C8PSA, OLED77C8PSA, OLED55E8PSA,
							OLED77C8PDA, OLED55E8PDA, OLED65E8PDA
		OLED65E8PSA
		Digital		Analog			Digital		Analog
Television system		SBTVD (ISDBT)		NTSC / PAL-M / PAL-N			DVB-T/T2		NTSC / PAL-M / PAL-N
Program coverage		VHF 2 ~ 13, UHF 14 ~ 69, DTV 2 ~ 69, CATV 1 ~ 135					VHF 2 ~ 13, UHF 14 ~ 69, DTV 2 ~ 69, CATV 1 ~ 125
External antenna					75 Ω
impedance
		Wireless module (LGSBWAC72) Specifications
			Wireless LAN (IEEE 802.11a/b/g/n/ac)
	Frequency Range						Output Power (Max.)
	2400 to 2483.5 MHz						15 dBm
	5150 to 5725 MHz						14.5 dBm
	5725 to 5850 MHz						14.5 dBm
				Bluetooth
	Frequency Range						Output Power (Max.)
	2400 to 2483.5 MHz						8.5 dBm

As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional frequency table.

For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body. FCC ID: BEJLGSBWAC72 / IC: 2703H-LGSBWAC72

	Environment condition
Operating Temperature		0 °C to 40 °C
Operating Humidity		Less than 80 %
Storage Temperature		-20 °C to 60 °C
Storage Humidity		Less than 85 %

•• The energy information provided on the product is shown in accordance with the applicable regulations of each respective country, (Depending upon the country).

-- The Energy consumption was measured in accordance with IEC 62087.

•• The actual energy consumption depends on the usage environment, (The content watched, TV settings, etc.).

<![if ! IE]>

<![endif]>ENGLISH

13

<![if ! IE]>

<![endif]>ENGLISH

Open Source Software

Notice Information

To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this product, please visit http://opensource. lge.com.

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to [e-mail].

This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

Licenses

Supported licenses may differ by model.

14

Important Information for Preventing Image Retention

OLED is a self-emissive technology, which brings many significant benefits to image quality and performance. As with any self-emitting display, it is possible for users of OLED TVs to experience temporary image retention under certain conditions, such as when displaying a static image on the screen for a long time. Even so, this phenomenon is rare under ordinary viewing conditions and is not a malfunction. Below sets forth helpful information you may refer to for using your OLED TV.

Examples of Images that may Cause Image Retention

•  Still images or fixed images containing certain information that are displayed uninterrupted on the screen, such as channel numbers, station logos, program titles, news or movie subtitles, and headlines.

•  Fixed menu or icons for video game consoles or broadcasting set-top boxes.

•  Black bars shown on the left, right, top, or bottom of the screen, such as in images with a 4:3 or 21:9 ratio.

Recommended Measures for Preventing Image Retention

•  Avoid watching a video displaying an image as listed above for extended periods of time.

•  Adjust your TV settings as below when turning on a video exhibiting an image as listed above for extended periods of time.

-- PicturePicture Mode SettingsPicture ModeECO -- PicturePicture Mode SettingsOLED LIGHTAdjust

to lower value

-- PictureOLED Panel SettingsLogo Luminance

AdjustmentHigh

•  Turn off the menu bar of an external device, such as a set-top box, to prevent long-term display of the menu bar of such device. (Please refer to the manual of the applicable external device for instructions.)

•  Adjust the settings as below when watching a video constantly showing black bars on the left, right, top or bottom, in order to

remove the black bars.
-- Picture	Aspect Ratio Settings	Aspect Ratio
Vertical Zoom or All-Direction Zoom

Information on Functions Supporting Image Quality in Relation to Temporary Image Retention

•  OLED TV offers a function called Pixel Refresher, which helps to prevent temporary image retention. This function can be operated automatically or manually.

•  The auto feature will activate when the TV power is turned off, but only after the TV has been turned on for a cumulated total of four

(4) hours or more, which need not be consecutive. Pixel Refresher will automatically run for several minutes after the screen is turned off. (Please note that failure to supply the AC power or disconnecting the power cord from the outlet will disable the auto feature.)

•  To manually activate Pixel Refresher, you will have to select

PictureOLED Panel SettingsPixel Refresher in the settings. Once manually activated, the function will run for approximately one (1) hour. During this time, a horizontal line may appear on the screen; however, this is not a malfunction.

•  If Pixel Refresher has not been manually activated for a certain period of time, a pop-up window advising to activate this function will appear on the screen. Please follow the instructions set forth in the pop-up window.

•  In addition to Pixel Refresher, there are other functions available for protecting the screen from image retention. For example, a function that automatically reduces the screen brightness level, in part or in whole, will be activated when a static image is displayed uninterrupted on the screen. Once the static image disappears, the brightness level will automatically return to the previous level. This function is an intended function, and not a malfunction.

<![if ! IE]>

<![endif]>ENGLISH

15

<![if ! IE]>

<![endif]>ENGLISH

Regulatory

WARNING!

Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

•• Using cabinets or stands recommended by the manufacturer of the television set.

•• Only using furniture that can safely support the television set.

•• Ensuring the television set is not overhanging the edge of the supporting furniture.

•• Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support.

•• Not placing the television set on cloth or other materials that may be located between the television set and supporting furniture.

•• Educating children about the dangers of climbing on furniture to reach the television set or its controls.

If your existing television set is being retained and relocated, the same considerations as above should be applied.

Symbols

Refers to alternating current (AC).

Refers to direct current (DC).

Refers to class II equipment.

Refers to stand-by.

Refers to “ON” (power).

Refers to dangerous voltage.

16

<![if ! IE]>

<![endif]>ENGLISH

17

The model and serial numbers of the TV are located on the back and on one side of the TV. Record them below should you ever need service.

MODEL

SERIAL NO.

OWNER’S MANUAL

EXTERNAL CONTROL DEVICE SETUP

Please read this manual carefully before operating the set and retain it for future reference.

www.lg.com