Loading...LG Electronics 42 2P PQ Q1 11, 42 2P PQ Q2 20, 42 2P PQ Q3 30, 5 50 0P PQ Q1 10, 50 0P PQ Q2 20 User Manual
...
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
ID Number(s): 6551 : 42PQ1000-ZA 6549 : 50PQ1000-ZA 6630 : 42PQ1000-ZD 6631 : 50PQ1000-ZD 6632 : 42PQ1100-ZE 6633 : 50PQ1100-ZE 6023: 42PQ2000-ZA 6320 : 42PQ2010-ZB 6024: 50PQ2000-ZA 6319 : 50PQ2010-ZB 6025: 42PQ3000-ZA 6020: 50PQ3000-ZA 6026: 42PQ6000-ZA 6875 : 42PQ6010-ZB 6029: 50PQ6000-ZA 6884 : 50PS2000-ZB 6322 : 50PS3000-ZB 6341: 50PS6000-ZC 6609 : 60PS4000-ZA
ENGLISH
PLASMA TV
OWNER’S MANUAL
PLASMA TV MODELS
42PQ10** 42PQ60** 50PQ10** 50PQ60** 42PQ11** 50PS20** 50PQ11** 50PS30** 42PQ20** 50PS60** 50PQ20** 60PS40** 42PQ30**
50PQ30**
Please read this manual carefully before operating your TV.
Retain it for future reference.
Record the model number and serial number of the TV.
Refer to the label on the back cover and quote this information.
To your dealer when requiring any service.
Model :
Serial No. :
This product qualifies for ENERGY STAR in the “factory default (Home Use mode)” setting and this is the setting in which power savings will be achieved.
Changing the factory default picture setting or enabling other features will increase power consumption that could exceed the limits necessary to qualify for Energy Star rating.
Downloaded From TV-Manual.com Manuals
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Downloaded From TV-Manual.com Manuals
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.
■ Image shown may differ from your TV.
Owner's
Manual
AVM |
|
ODE |
P |
|
OWER |
ENERGY
SAVING
LIST
MUTE |
IEW |
|
Q.V |
|
MENU |
Q. |
R |
MENU |
N/ |
INFO |
ETUR |
i |
|
|
EXIT |
|
GUIDE |
|
MARK |
|
FAV |
FR EE ZE
ENERGYS
AVING
RATIO
Owner’s Manual |
Batteries |
x 2
|
|
x 4 |
|
|
|
|
Bolts for stand assembly |
Cable Holder |
|
Power Cord |
|
(Refer to p.8) |
||
Protection Cover |
(Refer to p.8) |
|||
|
|
|||
|
(Refer to p.8) |
(Except for 60PS40**) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ferrite Core |
Cable management clip |
||||||
(This item is not included for |
|
(Refer to p.8) |
|||||
all models.) |
(Only 60PS40**) |
||||||
Wall Mounting Bracket
(Separate purchase)
AW-50PG60MS |
AW-60PG60MS |
(Except for 60PS40**) |
(Only 60PS40**) |
Use of ferrite core (This item is not included for all models.)
Ferrite core can be used to reduce the electromagnetic wave when connecting the power cord.
The closer the location of the ferrite core to the power plug, the better it is.
This item is not included for all models.
Polishing Cloth
Polishing cloth for use on the screen.
*Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth.
Do not use excessive force. This may cause scratching or discolouration.
power plug closely.
ACCESSORIES
1
Downloaded From TV-Manual.com Manuals
CONTENTS
ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
|
PREPARATION |
|
CONTENTS |
Back Cover for Wire Arrangement . . . . . . . . . . . . |
. 8 |
|
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . |
4 |
|
Back Panel Information . . . . . . . . . . . . . . . . . . . . |
6 |
|
Stand Installation . . . . . . . . . . . . . . . . . . . . . . . . . |
8 |
|
Desktop Pedestal Installation . . . . . . . . . . . . . . . . |
8 |
|
Careful installation advice . . . . . . . . . . . . . . . . . . . |
9 |
|
Wall Mount: Horizontal Installation . . . . . . . . . . . . |
9 |
|
Antenna Connection . . . . . . . . . . . . . . . . . . . . . . |
10 |
|
Swivel Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
10 |
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . 11
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Insertion of CI Module . . . . . . . . . . . . . . . . . . . . 19
Digital Audio Out Setup . . . . . . . . . . . . . . . . . . 19
Other A/V Source Setup . . . . . . . . . . . . . . . . . . 20
Usb Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
- Screen Setup for PC Mode . . . . . . . . . . . . . 24
WATCHING TV / PROGRAMME CONTROL
Remote Control Key Functions . . . . . . . . . . . . . 28 Turning on the TV . . . . . . . . . . . . . . . . . . . . . . . 32 Initializing setup . . . . . . . . . . . . . . . . . . . . . . . . 32 Programme Selection . . . . . . . . . . . . . . . . . . . . 32 Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . 32 Quick Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 On-Screen Menus Selection and Adjustment . . 34 Auto Programme Tuning . . . . . . . . . . . . . . . . . . . 35 Manual Programme Tuning (In Digital Mode) . . 36 Manual Programme Tuning (In Analogue Mode) . . 37 Programme Edit . . . . . . . . . . . . . . . . . . . . . . . . . 39 Software Update . . . . . . . . . . . . . . . . . . . . . . . . 42 Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 CI[COMMON INTERFACE] INFORMATION . . . 44
2
Selecting the Programme Table . . . . . . . . . . . . . |
45 |
Input List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
46 |
. . . . . . . . . . . . . . . . . . . . . . . . . . . . |
47 |
Data Service . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 Input Label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 AV Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Simple manual . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Initializing (Reset to original factory settings) . .52
TO USE A USB DEVICE |
|
When connecting a USB device . . . . . . . . . . . . . |
53 |
Photo List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
54 |
Music List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
.58 |
Movie List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
.61 |
DivX Registration Code . . . . . . . . . . . . . . . . . . . . . . . |
.65 |
Deactivation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
.66 |
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE)
- Switch on/off EPG . . . . . . . . . . . . . . . . . . . . 67 - Select Programme . . . . . . . . . . . . . . . . . . . . . 67 - Button Function in NOW/NEXT Guide Mode . 68 - Button Function in 8 Day Guide Mode . . . . 68 - Button Function in Date Change Mode . . . . 69 - Button Function in Extended Description Box . . 69 - Button Function in Record/Remind Setting Mode . 70 - Button Function in Schedule List Mode . . . . 70
PICTURE CONTROL
Picture Size (Aspect Ratio) Control . . . . . . . . . 71
ENERGY SAVING / POWER SAVING . . . . .73
Preset Picture Settings
- Picture Mode-Preset . . . . . . . . . . . . . . . . . . . 74
Manual Picture Adjustment
- Picture Mode-User option . . . . . . . . . . . . . . 75
Picture Improvement Technology . . . . . . . . . . . 76
Expert Picture Control . . . . . . . . . . . . . . . . . . . . 78
Downloaded From TV-Manual.com Manuals
Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Image Sticking Minimization (ISM) Method . . . 82
Demo Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Mode Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
SOUND & LANGUAGE CONTROL
Auto Volume Leveler . . . . . . . . . . . . . . . . . . . . . 85 Preset Sound Settings - Sound Mode . . . . . . . . 86 Sound Setting Adjustment -User Mode . . . . . . 87 SRS TruSurround XT . . . . . . . . . . . . . . . . . . . . . 87 Clear Voice II . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 TV Speakers On/ Off Setup . . . . . . . . . . . . . . . 89 Selecting Digital Audio Out . . . . . . . . . . . . . . . . 90 Audio Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Audio description . . . . . . . . . . . . . . . . . . . . . . . .92 I/II
- Stereo/Dual Reception (In Analogue Mode Only) . . . . 93 - NICAM Reception (In Analogue Mode Only) . . 94 - Speaker Sound Output Selection . . . . . . . . 94 On-Screen Menu Language/Country Selection . . 95 Language Selection (In Digital Mode only) . . . . 96
TELETEXT
Switch on/off . . . . . . . . . . . . . . . . . . . . . . . . . . 105 SIMPLE Text . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 TOP Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 FASTEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Special Teletext Functions . . . . . . . . . . . . . . . . 106
DIGITAL TELETEXT
Teletext within Digital Service . . . . . . . . . . . . . 107 Teletext in Digital Service . . . . . . . . . . . . . . . . . 107
APPENDIX
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . 108
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Product Specifications . . . . . . . . . . . . . . . . . . . 111
IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
External Control Device Setup . . . . . . . . . . . . . 115
CONTENTS
TIME SETTING
Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Auto On/ Off Timer Setting . . . . . . . . . . . . . . . 98
Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . 99
PARENTAL CONTROL /34
RATINGS
Set Password & Lock System . . . . . . . . . . . . . . 100
Block Programme . . . . . . . . . . . . . . . . . . . . . . . 101
Parental Control . . . . . . . . . . . . . . . . . . . . . . . . 102
Input Block . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Key Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
3
Downloaded From TV-Manual.com Manuals
PREPARATION
PREPARATION
FRONT PANEL CONTROLS
■ Image shown may differ from your TV.
CAUTION
G When the TV cannot be turned on with the remote control, press the main power button on the TV (When the power is turned off with the main power button on the TV, it will not be turned on with the remote control.)
42/50PQ11**, 42/50PQ30**, 50PS30**
Remote Control Sensor
Intelligent Sensor
Adjusts picture according to the surrounding conditions. (Except for 42/50PQ11**)
Power/Standby Indicator
• Illuminates red in standby mode.
• Illuminates blue when the TV is switched on.
INPUT |
MENU |
OK |
|
P |
|
INPUT |
MENU |
OK |
VOLUME |
PROGRAMME |
POWER |
42/50PQ10**, 42/50PQ20**, 50PS20**
Intelligent Sensor (Except for 42/50PQ10**)
Adjusts picture according |
|
to the surrounding |
|
|
conditions |
Remote |
|
Control |
|
Sensor |
Power/Standby Indicator |
|
|
Illuminates red in standby mode.
Illuminates blue when the TV is switched on.
INPUT |
MENU |
OK |
P |
INPUT |
MENU |
OK |
|
|
|
|
|
VOLUME |
|
PROGRAMME |
POWER |
||||
|
|
|
|
|
|
|
|
4
Downloaded From TV-Manual.com Manuals
42/50PQ60**, 50PS60**
Remote Control Sensor
Intelligent Sensor
Adjusts picture accord- 
ing to the surrounding conditions
Power/Standby Indicator
•Illuminates red in standby mode.
•The LED is off while the TV remains on.
P
PROGRAMME
P
VOLUME
OK
OK
MENU
MENU 
INPUT
INPUT
POWER
60PS40** |
Remote Control Sensor
POWER
Power/Standby Indicator
•illuminates red in standby mode.
•illuminates green when the TV is switched on.
PREPARATION
INPUT MENU OK
- 
+ 
P
|
|
|
|
|
|
|
INPUT |
MENU |
OK |
VOLUME |
PROGRAMME |
||
|
|
|
|
|
|
|
5
Downloaded From TV-Manual.com Manuals
PREPARATION
PREPARATION
BACK PANEL INFORMATION
A Image shown may differ from your TV.
42/50PQ10**, 42/50PQ11**
1
2 |
3 |
HDMI IN
(CONTROL & SERVICE)
45
1 Power Cord Socket
This TV operates on an AC power The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power
2OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of equipment. Connect to a Digital Audio Component.
Use an Optical audio cable.
3Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an external device to these jacks.
4HDMI Input
Connect an HDMI signal to HDMI IN.
7
IN YONL
SB ICE 8
UV
ERS
6
5RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.
6Antenna Input
Connect RF antenna to this jack.
7PCMCIA (Personal Computer Memory Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD SLOT. (This feature is not available in all countries.)
8 SERVICE ONLY PORT
6
Downloaded From TV-Manual.com Manuals
42/50PQ20**, 42/50PQ30**, 42/50PQ60**, 50PS20**, 50PS30**, 50PS60**, 60PS40**
10
1
|
|
|
11 |
2 |
3 |
4 |
|
|
|
IN 3 |
5 |
|
|
HDMI |
|
|
|
|
|
VIDEO-S |
|
HDMI IN |
2 |
|
|
|
|
|
R |
|
1 |
|
|
|
AUDIO |
12 |
HDMI/DVI IN |
|
|
|
MONO |
|
|
|
|
|
L/ |
|
|
|
|
|
VIDEO |
|
|
|
|
|
|
AV IN 3 |
5 |
6 |
7 |
8 |
9 |
|
1Power Cord Socket
This TV operates on an AC power The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power
2RGB/DVI Audio Input
Connect the audio from a PC or DTV.
3OPTICAL DIGITAL AUDIO OUT
Connect digital audio to various types of equipment. Connect to a Digital Audio Component.
Use an Optical audio cable.
4Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an external device to these jacks.
5HDMI Input
Connect an HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.
6RGB Input
Connect the output from a PC.
7RS-232C IN (CONTROL & SERVICE) PORT
Connect to the RS-232C port on a PC. This port is used for Service or Hotel mode.
8Component Input
Connect a component video/audio device to these jacks.
9Antenna Input
Connect RF antenna to this jack.
10PCMCIA (Personal Computer Memory Card International Association) Card Slot
Insert the CI Module to PCMCIA CARD SLOT. (This feature is not available in all countries.)
11USB Input
Connect USB storage device to this jack.
12Audio/Video Input
Connect audio/video output from an external device to these jacks.
S-Video Input
Connect S-Video out from an S-VIDEO device.
PREPARATION
7
Downloaded From TV-Manual.com Manuals
PREPARATION
PREPARATION
STAND INSTALLATION
(Except for 60PS40**)
■Image shown may differ from your TV.
■When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.
1 Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
BACK COVER FOR WIRE ARRANGEMENT
■ Image shown may differ from your TV.
After Connecting the cables as necessary, install CABLE HOLDER as shown and bundle the cables.
2
3
Assemble the TV as shown.
Fix the 4 bolts securely using the holes in the back of the TV.
CABLE HOLDER
Only 60PS40**
Install the CABLE MANAGEMENT CLIP as shown.
CABLE |
MANAGE- |
MENT CLIP |
How to remove the cable management clip
Hold the CABLE MANAGEMENT CLIP with both hands and pull it upward.
! NOTE
G When assembling the
stand, make sure to dis-
tinguish and assemble the front and rear side of
FRONT the stand correctly
DESKTOPPEDESTALINSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV.
4 inches
4 inches
4 inches |
4 inches |
|
8
Downloaded From TV-Manual.com Manuals
! NOTE
G Do not use the CABLE MANAGEMENT CLIP to lift the TV.
-If the TV is dropped, you may be injured or the TV may be damaged.
NOT USING THE DESK-TYPE STAND
■ Image shown may differ from your TV.
When installing the wall-mounted unit, use the protection cover Insert the PROTECTION COVER into the TV until clicking sound.
protection cover
CAREFUL INSTALLATION ADVICE
A You should purchase necessary components to fix the TV safety and secure to the wall from the market.
A Position the TV close to the wall to avoid the possibility of it falling when pushed.
A The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV
|
1 |
2 |
1 |
2 |
|
|
|
|
|
1 |
Use the eye-bolts or TV brackets/bolts to fix the |
|||
product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
2Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.
AThe TV can be installed in various ways such as on a wall, or on a desktop etc.
AThe TV is designed to be mounted horizontally.
WALL MOUNT: HORIZONTAL
INSTALLATION
A We recommend the use of a LG Brand wall mounting bracket when mounting the TV to a wall.
A We recommend that you purchase a wall mounting bracket which supports VESA standard.
A LG recommends that wall mounting be performed by a qualified professional installer
! NOTE
GShould Install wall mount on a solid wall perpendicular to the floor
GShould use a special wall mount, if you want to install it to ceiling or slanted wall.
GThe surface that wall mount is to be mounted on should be of sufficient strength to support the weight of TV set; e.g. concrete, natural rock, brick and hollow block.
GInstalling screw type and length depends on the wall mount used. Further information, refer to the instructions included with the mount.
GLG is not liable for any accidents or damage to property or TV due to incorrect installation:
-Where a non-compliant VESA wall mount is used.
-Incorrect fastening of screws to surface which may cause TV to fall and cause personal injury.
-Not following the recommended Installation method.
3 |
4 inches |
|
|
|
4 inches |
4 inches |
4 inches |
3 Use a sturdy rope to tie the product for align- |
4 inches |
ment. It is safer to tie the rope so it becomes |
|
horizontal between the wall and the product.
! |
NOTE |
A |
G |
When moving the TV undo the cords first. |
B |
|
|
|
G |
Use a platform or cabinet strong and large |
|
|
enough to support the size and weight of the TV. |
|
G To use the TV safely make sure that the height of |
|
VESA |
|
|
the bracket on the wall and on the TV is the same. |
Model |
Standard |
Quantity |
|
|
|
(A * B) |
Screw |
|
EARTHING |
|
400 * 400 |
M6 |
4 |
|||||||
42PQ10** |
|||||||||||
Ensure that you connect the earth wire to prevent |
|||||||||||
50PQ10** |
400 * 400 |
M6 |
4 |
||||||||
possible electric shock. If grounding methods are not |
|||||||||||
possible, have a qualified electrician install a separate |
42PQ11** |
400 * 400 |
M6 |
4 |
|||||||
circuit breaker |
50PQ11** |
400 * 400 |
M6 |
4 |
|||||||
Do not try to earth the TV by connecting it to tele- |
42PQ20** |
400 * 400 |
M6 |
4 |
|||||||
phone wires, lightening rods or gas pipes. |
|||||||||||
50PQ20** |
400 * 400 |
M6 |
4 |
||||||||
|
|
|
|
|
|
|
|||||
|
|
|
|
Power Supply |
|
|
42PQ30** |
400 * 400 |
M6 |
4 |
|
|
|
|
|
|
|
|
50PQ30** |
400 * 400 |
M6 |
4 |
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
42PQ60** |
400 * 400 |
M6 |
4 |
|
|
|
|
|
Circuit breaker |
|
||||||
|
|
|
|
|
|
|
50PQ60** |
400 * 400 |
M6 |
4 |
|
|
|
|
|
|
|
|
50PS20** |
400 * 400 |
M6 |
4 |
|
|
|
|
|
|
|
|
50PS30** |
400 * 400 |
M6 |
4 |
|
|
|
|
|
|
|
|
50PS60** |
400 * 400 |
M6 |
4 |
|
Downloaded From TV-Manual.com Manuals |
60PS40** |
600 * 400 |
M8 |
4 |
|||||||
PREPARATION
9
PREPARATION
■ To prevent damage do not connect to the mains outlet until all connections are made between the devices.
ANTENNA CONNECTION
■For optimum picture quality, adjust antenna direction.
■An antenna cable and converter are not supplied.
PREPARATION
10
Wall
Antenna
Socket
Outdoor
Antenna
(VHF, UHF)
Antenna
Multi-family Dwellings/Apartments (Connect to wall antenna socket)
RF Coaxial Wire (75 ohm)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
UHF
Signal
Amplifier
VHF
■In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as shown above.
■If signal needs to be split for two TVs,use an antenna signal splitter for connection.
SWIVEL STAND
After installing the TV, you can adjust the TV manually to the left or right direction by 20 degrees to suit your viewing position.
Downloaded From TV-Manual.com Manuals
EXTERNAL EQUIPMENT SETUP
■To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
■This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 42PQ30** models.
■Image shown may differ from your TV.
HD RECEIVER SETUP
■This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
Connecting with a component cable
(Except for 42/50PQ10**, 42/50PQ11**)
1 |
Connect the video outputs (Y, PB, PR) of the digital set |
1 |
|
||
top box to the COMPONENT IN VIDEO jacks on the |
|
|
|
|
|
|
TV. |
|
2 Connect the audio output of the digital set-top box to |
2 |
the COMPONENT IN AUDIO jacks on the TV. |
|
3Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
4 |
Select Component |
input source using the INPUT |
|
|
button on the remote control.
Signal |
Component |
HDMI |
|
|
|
|
|
|
|
X |
|
480i/576i |
O |
||
480p/576p |
O |
O |
|
720p/1080i |
O |
O |
|
1080p |
O |
O |
|
(50/60Hz only) |
(24Hz/30Hz/50Hz/60Hz) |
||
|
|||
|
|
|
(For 42/50PQ10**, 42/50PQ11**)
HDMI IN
Connecting with a component to HDMI adapter
* You can receive HD broadcasting by using Component to HDMI adapter
(You can inquire and purchase Component to HDMI adapter at Website or Market.)
HDMI OUT
Component to
HDMI adapter
SETUP EQUIPMENT EXTERNAL
11
Downloaded From TV-Manual.com Manuals
EXTERNAL EQUIPMENT SETUP
SETUP EQUIPMENT EXTERNAL
Connecting a set-top box with an HDMI cable
1Connect the digital set-top box to HDMI/DVI IN 1, HDMI IN, HDMI IN 2 or HDMI IN 3 jack on the TV.
2Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
3Select HDMI1, HDMI2 or HDMI3 input source using the INPUT button on the remote control.
! NOTE
G Check that your HDMI cable is version 1.3 or higher
If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display can result. Please use the latest cables that support at least HDMI version 1.3.
HDMI IN
2
1
HDMI/DVI
1
Connecting with an HDMI to DVI cable
(Except for 42/50PQ10**, 42/50PQ11**)
1Connect the digital set-top box to HDMI/DVI IN 1 jack on the TV.
2Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the TV.
3Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
4Select HDMI1 input source using the INPUT button on the remote control.
HDMI IN
2
1
HDMI/DVI IN
12
12
Downloaded From TV-Manual.com Manuals
DVD SETUP
Connecting with a component cable
(Except for 42/50PQ10**, 42/50PQ11**)
1 Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the TV.
|
1 |
2 |
Connect the audio outputs of the DVD to the |
|
COMPONENT IN AUDIO jacks on the TV.
3 |
Turn on the DVD player, insert a DVD. |
|
2 |
4 |
Select Component input source using the INPUT |
|
button on the remote control. |
5 |
Refer to the DVD player's manual for operating instruc- |
|
tions. |
SETUP EQUIPMENT EXTERNAL
Component Input ports
To achieve better picture quality, connect a DVD player to the component input ports as shown below.
Component ports on the TV |
Y |
PB |
PR |
|
|
|
|
|
|
|
|
|
Y |
PB |
PR |
Video output ports |
Y |
B-Y |
R-Y |
on DVD player |
Y |
Cb |
Cr |
|
Y |
Pb |
Pr |
|
|
|
|
13
Downloaded From TV-Manual.com Manuals
EXTERNAL EQUIPMENT SETUP
Connecting with a Euro Scart cable
SETUP EQUIPMENT EXTERNAL
1 |
Connect the Euro scart socket of the DVD to the AV1 |
|
Euro scart socket on the TV. |
||
|
||
2 |
Turn on the DVD player, insert a DVD. |
|
3 |
Select AV1 input source using the INPUT button on |
|
the remote control. |
||
|
||
|
If connected to AV2 Euro scart socket, select AV2 |
|
|
input source. |
|
|
1 |
|
4 |
Refer to the DVD player's manual for operating |
|
|
instructions. |
|
|
(R) AUDIO (L) |
|
|
|
|
|
|
|
|
|
|
AUDIO/ |
|
|
VIDEO |
|
|
|
|
Scart |
|
|
|
Input |
|
|
|
Output |
|
|
||
|
Video |
|
Audio |
RGB |
|
|
Video, Audio |
|
|
|||
|
|
|
|
|
|
|
||||||
AV1 |
|
O |
|
O |
|
O |
|
|
ATV only |
|||
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
AV2 |
|
O |
|
O |
|
X |
|
ATV, DTV, AV1/2/3 output is available. |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
Current |
Output Type |
|
AV1 |
|
AV2 |
AV2 |
||||||
|
|
|
(TV Out) |
(Monitor Out) |
(When DTV scheduled recording is in |
|||||||
input mode |
|
|
|
progress using recording equipment.) |
||||||||
Digital TV |
|
X |
|
|
O |
O |
||||||
|
|
|
||||||||||
Analogue TV |
|
O |
|
|
O |
O |
||||||
|
|
|
|
|
|
|
|
|
(The input mode is converted to |
|||
|
|
|
|
|
|
|
|
|
DTV automatically.) |
|||
|
|
|
|
|
|
|
|
|||||
AV1/2/3 |
|
O |
|
|
O |
O |
||||||
|
|
|
|
|
|
|
|
|||||
Component/RGB/HDMI |
|
O |
|
|
X |
O |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
GTV Out : Outputs analog TV video signals.
Monitor Out: Outputs the
current screen image.
GAV3, Component, RGB : Except for 42/50PQ10**, 42/50PQ11**.
! NOTE
G Any Euro scart cable used must be signal shielded.
14
Downloaded From TV-Manual.com Manuals
Connecting with a S-Video cable
(Except for 42/50PQ10**, 42/50PQ11**)
Connect the S-VIDEO output of the DVD to the S -
1VIDEO input on the TV.
2Connect the audio outputs of the DVD to the AUDIO input jacks on the TV.
3Turn on the DVD player, insert a DVD.
4Select AV3 input source using the INPUT button on the remote control.
5Refer to the DVD player's manual for operating instructions.
VIDEO L/MONO AUDIO R S-VIDEO HDMI IN 3
AV IN 3
VIDEO |
S-VIDEO |
L |
R |
ANT IN |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ANT OUT
12
SETUP EQUIPMENT EXTERNAL
Connecting the HDMI cable
Connect the HDMI output of the DVD to the
1HDMI/DVI IN 1, HDMI IN, HDMI IN 2 or HDMI IN 3 jack on the TV.
2Select HDMI1, HDMI2 or HDMI3 input source using the INPUT button on the remote control.
3Refer to the DVD player's manual for operating instructions.
!NOTE
G The TV can receive video and audio signals simultaneously when using a HDMI cable.
G If the DVD does not support Auto HDMI, you must set the output resolution appropriately.
G Check that your HDMI cable is version 1.3 or higher
If the HDMI cables don’t support HDMI version 1.3, flickering or no screen display can result. Please use the latest cables that support at least HDMI version 1.3.
HDMI IN
2
1
HDMI/DVI
1
15
Downloaded From TV-Manual.com Manuals
EXTERNAL EQUIPMENT SETUP
SETUP EQUIPMENT EXTERNAL
VCR SETUP
■ To avoid picture noise (interference), allow adequate distance between the VCR and TV.
Connecting with a RF Cable
|
|
|
|
|
|
|
|
|
|
|
|
ANT OUT S-VIDEO VIDEO |
L |
R |
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1
OUTPUT
SWITCH
Wall Jack
2
Antenna
1Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the TV.
2 Connect the antenna cable to the ANT IN socket of the VCR.
3Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for viewing.
16
Downloaded From TV-Manual.com Manuals
Connecting with a Euro Scart cable
Connect the Euro scart socket of the VCR to the AV1
1Euro scart socket on the TV.
2Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
3Select AV1 input source using the INPUT button on the remote control.
4If connected to AV2 Euro scart socket, select AV2 input source.
Scart |
|
|
|
Input |
|
|
|
Output |
|
|
||
|
Video |
|
Audio |
RGB |
|
|
Video, Audio |
|
|
|||
|
|
|
|
|
|
|
||||||
AV1 |
|
O |
|
O |
|
O |
|
|
ATV only |
|||
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
AV2 |
|
O |
|
O |
|
X |
|
ATV, DTV, AV1/2/3 output is available. |
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
Current |
Output Type |
|
AV1 |
|
AV2 |
AV2 |
||||||
|
|
|
(TV Out) |
(Monitor Out) |
(When DTV scheduled recording is in |
|||||||
input mode |
|
|
|
progress using recording equipment.) |
||||||||
Digital TV |
|
X |
|
|
O |
O |
||||||
|
|
|
||||||||||
Analogue TV |
|
O |
|
|
O |
O |
||||||
|
|
|
|
|
|
|
|
|
(The input mode is converted to |
|||
|
|
|
|
|
|
|
|
|
DTV automatically.) |
|||
|
|
|
|
|
|
|
|
|||||
AV1/2/3 |
|
O |
|
|
O |
O |
||||||
|
|
|
|
|
|
|
|
|||||
Component/RGB/HDMI |
|
O |
|
|
X |
O |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
1
|
|
(R) AUDIO (L) |
|
|
|
|
|
|
|
|
|
|
AUDIO/ |
|
|
VIDEO |
|
|
|
|
GTV Out : Outputs analog TV video signals.
Monitor Out: Outputs the
current screen image.
GAV3, Component, RGB : Except for 42/50PQ10**, 42/50PQ11**.
SETUP EQUIPMENT EXTERNAL
! NOTE
G Any Euro Scart cable used must be signal shielded.
17
Downloaded From TV-Manual.com Manuals
EXTERNAL EQUIPMENT SETUP
SETUP EQUIPMENT EXTERNAL
Connecting with a RCA cable
(Except for 42/50PQ10**, 42/50PQ11**)
1Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red)
2Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
3Select AV3 input source using the INPUT button on the remote control.
!NOTE
G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.
VIDEO L/MONO AUDIO R S
AV IN 3
Connecting with a S-Video cable
(Except for 42/50PQ10**, 42/50PQ11**)
Connect the S-VIDEO output of the VCR to the S -
1VIDEO input on the TV set. The picture quality is improved; compared to normal composite (RCA cable) input.
2Connect the audio outputs of the VCR to the AUDIO input jacks on the TV.
3Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
4Select AV3 input source with using the INPUT button on the remote control.
!NOTE
GIf both S-VIDEO and VIDEO sockets have been connected to the S-VHS VCR simultaneously, only the S-VIDEO can be received.
18
VIDEO L/MONO AUDIO R S-VIDEO HDMI IN 3
AV IN 3
1
S-VIDEO VIDEO |
L |
R |
ANT IN |
OUTPUT |
|
|
ANT OUT |
SWITCH |
|
|
|
S-VIDEO VIDEO |
L |
R |
ANT IN |
OUTPUT |
ANT OUT |
SWITCH |
|
12
Downloaded From TV-Manual.com Manuals
INSERTION OF CI MODULE
- To view the encrypted (pay) services in digital TV mode.
- This item is not included for all countries.
1
Insert the CI Module to PCMCIA (Personal Computer 1 Memory Card International Association) CARD SLOT
of TV as shown.
For further information, see p.44.
3
! NOTE
G Check if the CI module is inserted into the PCMCIA card slot in the right direction. If the module is not inserted properly, this can cause damage to the TV and the PCMCIA card slot.
DIGITAL AUDIO OUT SETUP
Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port. If you want to enjoy digital broadcasting through 5.1-channel speakers, connect the OPTICAL DIGITAL AUDIO OUT terminal on the back of TV to a DVD Home Theater (or amp).
1Connect one end of an optical cable to the TV Digital Audio (Optical) Output port.
2Connect the other end of the optical cable to the digital audio (Optical) input on the audio equipment.
3Set the “TV Speaker option - Off ” in the AUDIO menu.(Gp.89). Refer to the external audio equipment instruction manual for operation.
IN
1
VI IN
2
CAUTION
GDo not look into the optical output port. Looking at the laser beam may damage your vision.
SETUP EQUIPMENT EXTERNAL
19
Downloaded From TV-Manual.com Manuals
EXTERNAL EQUIPMENT SETUP
OTHER A/V SOURCE SETUP
(Except for 42/50PQ10**, 42/50PQ11**)
1Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colours. (Video = yellow, Audio Left = white, and Audio Right = red)
|
|
2 |
Select AV3 input source using the INPUT button on |
|
EXTERNAL |
||||
the remote control. |
||||
|
||||
|
|
|
||
SETUPEQUIPMENT |
3 |
Operate the corresponding external equipment. |
||
|
Refer to external equipment operating guide. |
|||
|
|
|
||
|
|
|
|
|
VIDEO L/MONO AUDIO R S-VIDEO HDMI IN 3
AV IN 3
Camcorder
Video Game Set
VIDEO L R
1
USB SETUP
(Except for 42/50PQ10**, 42/50PQ11**)
1Connect the USB device to the USB IN jacks on the side of TV.
After connecting the USB IN jacks, you use the USB
2function. (G p.53)
1
O HDMI IN 3
20
Downloaded From TV-Manual.com Manuals
PC SETUP(Except for 42/50PQ10**, 42/50PQ11**)
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
Connecting with a D-sub 15 pin cable
1Connect the RGB output of the PC to the RGB IN (PC) jack on the TV.
2Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV.
3Turn on the PC and the TV
4Select RGB input source using the INPUT button on the remote control.
HDMI IN
2
1
HDMI/DVI IN
21
AUDIO |
RGB OUTPUT |
Connecting with a HDMI to DVI cable
1Connect the DVI output of the PC to the HDMI/DVI IN1 jack on the TV.
2Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV.
3Turn on the PC and the TV.
4Select HDMI1 input source using the INPUT button on the remote control.
HDMI IN
2
1
HDMI/DVI IN
12
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO |
||
|
DVI-PC OUTPUT |
|||||||||
|
|
|
|
|
|
|
|
|
|
|
SETUP EQUIPMENT EXTERNAL
21
Downloaded From TV-Manual.com Manuals
EXTERNAL EQUIPMENT SETUP
Supported Display Resolution
SETUP EQUIPMENT EXTERNAL
RGB-PC, HDMI/DVI-PC mode |
|
|
HDMI/DVI-DTV mode |
|
||
|
|
|
|
|
|
|
Resolution |
Horizontal |
Vertical |
|
Resolution |
Horizontal |
Vertical |
Frequency(kHz) |
Frequency(Hz) |
|
Frequency(kHz) |
Frequency(Hz) |
||
|
|
|
||||
|
|
|
|
|
31.469 |
59.94 |
720x400 |
31.468 |
70.08 |
|
640x480 |
||
640x480 |
31.469 |
59.94 |
|
|
31.469 |
60 |
800x600 |
37 879 |
60.31 |
|
720x480 |
31.47 |
59.94 |
1024x768 |
48.363 |
60.00 |
|
|
31.50 |
60 |
1280x768 |
47 78 |
59.87 |
|
720x576 |
31.25 |
50.00 |
1360x768 |
47 72 |
59.8 |
|
1280x720 |
37 50 |
50.00 |
1920x1080 |
66.587 |
59.93 |
|
|
44.96 |
59.94 |
(RGB-PC) |
|
|
|
|
45.00 |
60 |
|
|
|
|
|
||
1920x1080 |
67 50 |
60.00 |
|
1920x1080 |
28.125 |
50.00 |
(HDMI-PC) |
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
33.72 |
59.94 |
|
|
|
|
|
33.75 |
60 |
|
|
|
|
|
27 00 |
24.00 |
|
|
|
|
|
33.75 |
30 |
|
|
|
|
|
56.25 |
50.00 |
|
|
|
|
|
67 433 |
59.94 |
|
|
|
|
|
67 50 |
60 |
22
Downloaded From TV-Manual.com Manuals
! NOTE
GAvoid keeping a fixed image on the set’s screen for prolonged periods of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible.
GThere may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.
GThe synchronization input waveform for Horizontal and Vertical frequencies are separate.
GWe recommend using 1024x768, 60Hz (42PQ20**, 42PQ30**, 42PQ60**) / 1360x768, 60Hz ( 50PQ20**, 50PQ30**, 50PQ60**) / 1920x1080, 60Hz(50PS20**, 50PS30**, 50PS60**, 60PS40**) for the PC mode, they provide the best picture quality
GConnect the signal cable from the monitor output port of the PC to the RGB (PC) port of the TV or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the TV.
GConnect the audio cable from the PC to the Audio input on the TV. (Audio cables are not included with the TV).
GIf using a sound card, adjust PC sound as required.
GIf the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only one of either RGB or HDMI IN (or HDMI/DVI IN) to display the PC output on the TV.
GIf the graphic card on the PC does output analog and digital RGB simultaneously, set the TV to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the TV.)
GDOS mode may not work depending on the video card if you use an HDMI to DVI cable.
GIf you use an RGB-PC cable that is too long, there may be interference on the screen. We recommend using under 5m of cable. This provides the best picture quality.
SETUP EQUIPMENT EXTERNAL
23
Downloaded From TV-Manual.com Manuals
EXTERNAL EQUIPMENT SETUP
SETUP EQUIPMENT EXTERNAL
Screen Setup for PC mode (Except for 42/50PQ10**, 42/50PQ11**)
Screen Reset
Returns Position, Size and Phase to the factory default settings.
This function works in the following mode : RGB[PC].
PICTURE |
Move |
OK |
SCREEN |
Move |
RETURN Prev. |
|
|
|
|
|
|
||
E |
|
|
|
Resolution |
|
|
• Contrast |
100 |
|
|
|
|
|
|
|
|
|
|
||
• Brightness |
50 |
|
|
Auto Config. |
|
|
|
|
|
|
|
|
|
• Sharpness |
70 |
|
|
|
|
|
• Colour |
70 |
|
|
Position |
|
To Set |
• Tint |
0 |
R |
|
G |
|
|
|
|
|
||||
• Advanced Control |
|
Size |
Yes |
No |
||
|
|
|
|
|||
• Picture Reset |
|
|
Phase |
|
|
|
ScreenScreen |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Reset |
G |
|
MENU
Select PICTURE.
2
OK
Select Screen.
OK
Select Reset.
4
OK
Select Yes.
OK |
Run Reset. |
•Press the MENU button to return to normal TV viewing.
•Press the RETURN button to move to the previous menu screen.
24
Downloaded From TV-Manual.com Manuals
Auto Configure (RGB [PC] mode only)
Automatically adjust the picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment.
Auto configure
This function is for automatic adjustment of the screen position, size, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress.
PICTURE |
|
|
|
SCREEN |
Move |
RETURN |
Prev. |
|
Move |
OK |
Resolution |
|
|
|
|||
E |
|
|
|
|
|
|
||
• Contrast |
100 |
|
|
Auto Config. G |
|
|
|
|
• Brightness |
50 |
|
|
|
|
|
||
|
|
|
|
|
|
|||
• Sharpness |
70 |
|
|
Position |
|
To Set |
|
|
• Colour |
70 |
|
|
|
|
|||
|
|
|
Yes |
No |
||||
• Tint |
0 |
R |
G |
Size |
||||
|
|
|
||||||
• Advanced Control |
|
|
|
|
|
|||
• Picture Reset |
|
|
Phase |
|
|
|
||
|
|
|
|
|
|
|||
ScreenScreen
Reset
MENU
OK
Select PICTURE.
Select Screen.
•If the position of the image is still not correct, try Auto adjustment again.
•If picture needs to be adjusted again after Auto adjustment in RGB (PC), you can adjust the Position, Size or Phase.
OK |
Select Auto Config.. |
SETUP EQUIPMENT EXTERNAL
4
OK
Select Yes.
OK |
Run Auto Config.. |
|
•Press the MENU button to return to normal TV viewing.
•Press the RETURN button to move to the previous menu screen.
25
Downloaded From TV-Manual.com Manuals
EXTERNAL EQUIPMENT SETUP
SETUP EQUIPMENT EXTERNAL
Selecting Resolution
To view a normal picture, match the resolution of RGB mode and selection of PC mode.
This function works in the following mode: RGB[PC]
PICTURE |
|
|
|
|
SCREEN |
|
Move |
RETURN |
Prev. |
|
Move |
OK |
|
|
|
|
|
||
E |
|
|
|
|
Resolution |
G |
1024 x 768 |
|
|
• Contrast |
100 |
|
|
|
|
1280 x 768 |
|
||
|
|
|
|
|
Auto Config. |
|
|
||
• Brightness |
|
50 |
|
|
|
1360 x 768 |
|
||
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
||
• Sharpness |
|
70 |
|
|
Position |
|
|
|
|
• Colour |
|
70 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
• Tint |
|
0 |
R |
G |
Size |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• Advanced Control |
|
|
|
|
|
|
|||
• Picture Reset |
|
|
|
Phase |
|
|
|
|
|
ScreenScreen |
|
|
|
|
Reset |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MENU
|
Select PICTURE. |
OK |
Select Screen. |
OK |
Select Resolution. |
|
4
Select the desired resolution.
•Press the MENU button to return to normal TV viewing.
•Press the RETURN button to move to the previous menu screen.
26
Downloaded From TV-Manual.com Manuals
Adjustment for screen Position, Size, Phase
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually.
This function works in the following mode : RGB[PC].
PICTURE |
Move |
OK |
|
E |
|
|
|
• Contrast |
100 |
|
|
• Brightness |
50 |
|
|
• Sharpness |
70 |
|
|
• Colour |
70 |
|
|
• Tint |
0 |
R |
G |
• Advanced Control |
|
||
• Picture Reset |
|
|
|
ScreenScreen
|
|
|
|
EXTERNAL |
Position |
G |
F |
G |
EQUIPMENT |
SCREEN |
|
Move |
RETURN Prev. |
|
Resolution |
|
|
|
|
Auto Config. |
|
|
|
|
|
|
|
D |
|
|
|
|
E |
SETUP |
Size |
|
|
|
|
|
|
|
|
|
Phase |
|
|
|
|
Reset |
|
|
|
|
MENU
Select PICTURE.
OK |
Select Screen. |
|
|
|
|
OK |
Select Position, Size |
or Phase. |
4
Make appropriate adjustments.
•Press the MENU button to return to normal TV viewing.
•Press the RETURN button to move to the previous menu screen.
27
Downloaded From TV-Manual.com Manuals
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
(Only 42/50PQ10**, 42/50PQ11**, 42/50PQ20**, 42/50PQ30**)
When using the remote control, aim it at the remote control sensor on the TV.
|
|
POWER |
|
V MODE |
POWERSAVING |
|
AV MODE |
POWERSAVING |
|
1 |
|
|
|
POWER |
|
AV MODE |
ENERGYSAVING |
/ TV WATCHING |
1 |
|
|
|
|
CONTROLPROGRAMME |
LIST |
Q.VIEW |
|
||
|
|
MUTE |
MENU |
RETURN / EXIT |
2
Q.MENU INFO i GUIDE MARK
FAV
2 |
FAV |
Q.MENU INFO i |
GUIDE |
28
TV/RAD Selects Radio, TV and DTV channel.
AV MODE It helps you select and set images and sounds when connecting AV devices.(G p.50)
POWER Switches the TV on from standby or off to standby.
INPUT External input mode rotate in regular sequence.(G p.46)
1 ENERGY SAVING Adjust the power saving mode of the TV.(G p.73)
orPOWERSAVING
0~9 number Selects a programme.
button Selects numbered items in a menu.
Q.VIEW Returns to the previously viewed programme.
LIST Displays the programme table.(G p.45)
THUMBSTICK Allows you to navigate the on-screen menus and adjust (Up/Down/Left/Right) the system settings to your preference.
OK Accepts your selection or displays the current mode.
MENU Selects a menu.
Clears all on-screen displays and returns to TV viewing from any menu.(G p.34)
RETURN(EXIT) Allows the user to move return one step in an interactive application, EPG or other user interaction function.
Coloured These buttons are used for teletext (on TELETEXT buttons models only) , Programme edit.
2TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.(G p.105)
SUBTITLE Recalls your preferred subtitle in digital mode.
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu appears at the screen.(G p.47)(Except for 42/50PQ10**, 42/50PQ11**)
Downloaded From TV-Manual.com Manuals
Loading...