Contents
Language Page
____________________________________________________________________________
English |
1-22 |
1
This product offers: |
INSTANT TRANSMISSION is the state-of-the-art new wireless |
|
|
|
transmission technology, exclusively designed and developed by |
|
|
|
|
|
LA CROSSE TECHNOLOGY. INSTANT TRANSMISSION offers you |
|
|
an immediate update (every 4 seconds!) of all your outdoor data |
|
|
measured from the transmitters: follow your climatic variations in |
|
|
real-time! |
|
|
|
INVENTORY OF CONTENTS
1.Wireless Temperature Station
2.Wireless Temperature Sensor (TX40U-IT) and mounting bracket.
3.Instruction Manual
3
WIRELESS 915 MHz TEMPERATURE STATION
Instruction Manual
TABLE OF CONTENTS
Topic |
Page |
Inventory of Contents |
3 |
Features |
4 |
Setting Up |
5 |
Battery Installation |
6 |
Function keys |
8 |
LCD Screen and Settings |
9 |
Manual Settings |
10 |
Display of Indoor Temperature |
13 |
Display of Outdoor Temperature and MIN/MAX records |
13 |
Reset of MIN/MAX records |
14 |
Weather girl Icons (Temperature Condition Icons) |
14 |
915 MHz Reception |
15 |
Mounting |
16 |
Care and Maintenance |
18 |
Specifications |
18 |
Warranty Information |
19 |
2 |
|
FEATURES:
Temperature station |
Hanging hole |
|
LCD Display
Battery compartment
Function Keys 
Stand
The Temperature Station
Manual time setting (hour and minute display)
Time display 12 or 24-hour time format
Indoor and outdoor temperature reading in degree Fahrenheit (°F) or Celsius (°C)
Display MIN/MAX outdoor temperature
Display one of the 5 easy-to-read temperature condition icons featured by Weather Girl
4
Low battery indicator
Wireless transmission at 915 MHz
Signal reception intervals at 4 seconds
Wall mounting or table standing (removable table stand included)
The Outdoor Temperature Transmitter
Remote transmission of outdoor temperature to Temperature
Station by 915 MHz signalsRain proof casing
Wall mounting and table-standing
Mounting at a sheltered place. Avoid direct rain and sunshine
SETTING UP:
Note: this temperature station can only receive one transmitter.
1.First, insert the batteries to the transmitter (see “How to install and replace batteries in the Temperature transmitter” below).
5
1. Lift up the battery compartment cover.
2. Insert batteries observing the correct polarity (see marking). 3. Replace compartment cover.
HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE TRANSMITTER
The Temperature transmitter uses 2 x AAA, IEC LR3, 1.5V batteries. When batteries will need to be replaced, the low battery icon will appear on the LCD of the Temperature Station. To install and replace the batteries, please follow the
steps below:
1. Remove the battery compartment cover.
2. Insert the batteries, observing the correct polarity (see marking). 3. Replace the battery holder to the unit.
7
2.Within 30 seconds of powering up the transmitter, insert the batteries to the Temperature Station (see “How to install and replace batteries in the Temperature station” below). Once the batteries are in place, all segments of the LCD will light up briefly. Following the indoor temperature, the Weather Girl icon and the time as 12:00 will be displayed. If they are not shown in LCD after 60 seconds, remove the batteries and wait for at least 60 seconds before reinserting them. Once the indoor data is displayed user may proceed to the next step.
3.After the batteries are inserted, the Temperature Station will start receiving data signal from the transmitter. The outdoor temperature should then be displayed on the Temperature station. If this does not happen after 2 minutes, the batteries will need to be removed from both units and reset from step 1.
4.In order to ensure sufficient 915 MHz transmission however, this should under good conditions be a distance no more than 200 feet (60 meters) between the final position of the Temperature Station and the transmitter (see notes on “Positioning” and “915 MHz Reception”).
HOW TO INSTALL AND REPLACE BATTERIES IN THE TEMPERATURE STATION
The Temperature Station uses 3 x AA, IEC LR6, 1.5V batteries. When batteries will need to be replaced, the low battery icon will appear on the LCD. To install and replace the batteries, please follow the steps below:
6
Note:
In the event of changing batteries in any of the units, all units need to be reset by following the setup procedures. This is because a random security code is assigned by the transmitter at start-up and this code must be received and stored by the Temperature Station in the first few minutes of power supplying.
BATTERY CHANGE:
It is recommended to replace the batteries in all units regularly to ensure optimum accuracy of these units. (Battery life –see Specifications)
Please participate in the preservation of the environment. Return used batteries to an authorized depot.
FUNCTION KEYS:
The Temperature Station has only two easy to use function keys.
SET key |
+ key |
8
Loading...