Product Information
GE Magnetic Contacts
Steel Door Contact
3/4” and 1” contacts
1078/1076 Series
Overview The GE Interlogix 1078 Series Steel Door contacts are designed specifically for use in the steel doors commonly found in commercial building applications. The unique housing design features a rugged unibody construction with flexible ribbed sides for quick, secure installation without gluing. The magnet housing isolates the magnet from the surrounding steel for maximum gap distances, both make and break. Over seven models including: Wide Gap, SPDT, DPDT, and Biased for High Security applications make the 1078 Series the most widely used and comprehensive line available.
On available models a terminal connection (T) makes installation easier. Simply strip the wire, insert it into the terminal block and tighten. The terminal accepts any wire size from 14 to 22 gauge, and has a unique one piece design for added strength.
Architectural
and
Engineering The reed shall be potted in the contact housing with a Specifications polyurethane based compound. Contact and magnet housing shall
snap-lock into a 3/4" or 1" dia. hole. Housings shall be molded of flame retardant ABS plastic. Color of housings shall be off-white, grey or mahogany brown. The magnet shall be made of Alnico V. Rare Earth Magnet shall be made of neodymium iron boron.
Designed |
Snap-lock insulation bushing for tight fit and maximum gap |
for use in |
in steel. |
Steel Doors |
|
|
Both contact and magnet plastic housings are constructed of |
|
one piece of thick-walled ABS plastic for maximum strength |
|
and durability. |
Optional 1840
Rare Earth Magnet
Standard Features
Fly leads and terminal
Special ribbed sides allow
Rugged unibody and reliability
Terminal models available
Regular, Wide Gap, SPDT, DPDT, and High Security models available
steel door with top channel available
Model numbers
1076, 1076W, 1076C, 1076CW, 1076D, 1078, 1078W, 1078C, 1078CT, (R)1078, 1078CTW