HP Compaq Presario V6100 CTO, Compaq Presario V6102EA, Compaq Presario V6104NR, Compaq Presario V6104US, Compaq Presario V6105EA User Guide

Drives

User Guide

© Copyright 2006 Hewlett-Packard

Development Company, L.P.

The information contained herein is subject

to change without notice. The only

warranties for HP products and services are

set forth in the express warranty statements

accompanying such products and services.

Nothing herein should be construed as

constituting an additional warranty. HP shall

not be liable for technical or editorial errors

or omissions contained herein.

First Edition: September 2006

Document Part Number: 419871-001

Table of contents

1 Identifying installed drives

2 Handling drives

3 Using an optical drive

Inserting an optical disc ........................................................................................................................ 5

Removing an optical disc when running on battery or external power ................................................. 6

Removing an optical disc when no computer power is available ......................................................... 7

4 Improving hard drive performance

Using Disk Defragmenter ..................................................................................................................... 8

Using Disk Cleanup .............................................................................................................................. 8

5 Replacing a hard drive

Index ................................................................................................................................................................... 12

ENWW iii

iv ENWW

1 Identifying installed drives

To view the drives installed on the computer, select Start > My Computer.

On models with a secondary hard drive (drive D), the optical drive becomes drive E. The next drive

added to the system, such as a new USB drive, will be assigned the next available drive letter.

ENWW 1

2 Handling drives

Drives are fragile computer components that must be handled with care. Refer to the following cautions

before handling drives. Additional cautions are included with the procedures to which they apply.

CAUTION To reduce the risk of damage to the computer, damage to a drive, or loss of

information, observe these precautions:

Before you move a computer or external hard drive from one location to another, initiate standby,

and allow the screen to clear.

Before handling a drive, discharge static electricity by touching the unpainted metal surface of

the drive.

Do not touch the connector pins on a removable drive or on the computer.

Handle a drive carefully; do not drop a drive or place items on it.

Before removing or inserting a drive, shut down the computer. If you are unsure whether the

computer is off or in hibernation, turn the computer on, and then shut it down through the operating

system.

Do not use excessive force when inserting a drive into a drive bay.

Do not type on the keyboard or move the computer while the optical drive is writing to a disc. The

write process is sensitive to vibration.

When the battery is the only source of power, be sure that the battery is sufficiently charged

before writing to a medium.

Avoid exposing a drive to temperature or humidity extremes.

Avoid exposing a drive to liquids. Do not spray the drive with cleaning products.

Remove the medium from a drive before removing the drive from the drive bay, or traveling with,

shipping, or storing a drive.

If a drive must be mailed, place the drive in a bubble-pack mailer or other suitable protective

packaging and label the package “FRAGILE.”

Avoid exposing a drive to magnetic fields. Security devices with magnetic fields include airport

walk-through devices and security wands. The airport security devices that check carry-on

luggage, such as conveyor belts, use x-rays instead of magnetism and will not damage a drive.

2 Chapter 2 Handling drives ENWW