Hotpoint ENTM 18010 F, ENTM 19020 F, ENTM 18020 F, ENTM 19010 F Manual

0 (0)

ENTM 18010 F (EX)

ENTM 18020 F (EX)

ENTM 19010 F (EX)

ENTM 19020 F (EX)

English

Operating Instructions

REFRIGERATOR/FREEZER COMBINATION

Contents

Operating Instructions, 1

Assistance, 2

Description of the appliance, 4

Reversible doors, 6

Installation, 7

Start-up and use, 7

Maintenance and care, 8

Precautions and tips, 8

Troubleshooting, 9

Français

Mode d’emploi

COMBINE REFRIGERATEUR/CONGELATEUR

Sommaire

Mode d’emploi, 1

Assistance, 2

Description de l’appareil, 4

Réversibilité des portes, 6

Installation, 10

Mise en marche et utilisation, 10

Entretien et soin, 11

Précautions et conseils, 11

Anomalies et remèdes, 12

Español

Manual de instrucciones

COMBINADO FRIGORÍFICO/CONGELADOR

Sumario

Manual de instrucciones, 1

Asistencia, 2

Descripción del aparato, 5

Reversibilidad de la apertura de las puertas, 6

Instalación, 13

Puesta en funcionamiento y uso, 13

Mantenimiento y cuidados, 14

Precauciones y consejos, 15

Anomalías y soluciones, 16

Portuges

Instruções para a utilização

COMBINADO FRIGORÍFICO/CONGELADOR

Índice

Instruções para a utilização, 1

Assistência, 3

Descrição do aparelho, 5

Reversibilidade da abertura das portas, 6

Instalação, 17

Início e utilização, 17

Manutenção e cuidados, 18

Precauções e conselhos, 19

Anomalias e soluções, 20

Assistance

Before calling for Assistance:

Check if the malfunction can be solved on your own (see Troubleshooting).

If after all the checks, the appliance still does not operate or the problem persists, call the nearest Service Centre

Communicating:

type of malfunction

appliance model (Mod.)

serial number (S/N)

This information can be found on the data plate located on the bottom left side of the refrigerator compartment.

Never call on unauthorized technicians and always refuse spare parts which are not originals.

Asistencia

Antes de llamar al Servicio de Asistencia Técnica:

Verifique si la anomalía puede ser resuelta por Ud. mismo (ver Anomalías y Soluciones).

Si, no obstante todos los controles, el aparato no funciona y el inconveniente por Ud detectado continúa, llame al Centro de Asistencia Técnico más cercano.

Comunique:

el tipo de anomalía

el modelo de la máquina (Mod.)

el número de serie (S/N)

Esta información se encuentra en la placa de características ubicada en el compartimento frigorífico abajo a la izquierda.

No recurra nunca a técnicos no autorizados y rechace siempre la instalación de repuestos que no sean originales.

La siguiente información es válida solo para España.

Para otros países de habla hispana consulte a su vendedor.

Assistance

Avant de contacter le centre d’Assistance :

Vérifiez si vous pouvez résoudre l’anomalie vous-même (voir Anomalies et Remèdes).

Si, malgré tous ces contrôles, l’appareil ne fonctionne toujours pas et si l’inconvénient persiste, appelez le service après-vente le plus proche.

Signalez-lui :

le type d’anomalie

le modèle de l’appareil (Mod.)

le numéro de série (S/N)

Vous trouverez tous ces renseignements sur l’étiquette signalétique placée dans le compartiment réfrigérateur en bas à gauche.

Ne vous adressez jamais à des techniciens non agréés et exigez toujours l’installation de pièces détachées originales.

- model - modèle

- modelo - modelo

Ampliación de garantía

Llame al 902.363.539 y le informaremos sobre el fantástico plan de ampliación de garantía hasta 5 años.

Consiga una cobertura total adicional de

Piezas y componentes

Mano de obra de los técnicos

Desplazamiento a su domicilio de los técnicos

Y NO PAGUE AVERIAS NUNCA MAS

Servicio de asistencia técnica (SAT)

Llame al 902.133.133 y nuestros técnicos intervendrán con rapidez y eficacia, devolviendo el electrodoméstico a sus condiciones óptimas de funcionamiento.

En el SAT encontrará recambios, accesorios y productos específicos para la limpieza y mantenimiento de su electrodoméstico a precios competitivos.

ESTAMOS A SU SERVICIO

- serial number

- numéro de série

- número de serie - número de série

2

Assistência

Antes de contactar a Assistência técnica:

Verifique se pode resolver sozinho a anomalia (veja as Anomalias e Soluções).

Se, apesar de todos os controlos, o aparelho não funcionar e o inconveniente detectado continuar, contactar o Centro de Assistência mais próximo.

Comunique:

o tipo de anomalia

o modelo da máquina (Mod.)

o número de série (S/N)

Estas informações encontram-se na placa de identificação situada no compartimento frigorífico embaixo à esquerda.

Nunca recorrer a técnicos não autorizados e negar sempre a instalação de peças sobresselentes não originais para reposição.

- model - modèle

- modelo - modelo

- serial number

- numéro de série

- número de serie - número de série

3

 

 

 

 

 

 

 

 

 

 

 

 

Description of the appliance

Description de l’appareil

Overall view

The instructions contained in this manual are applicable to different model refrigerators. The diagrams may not directly represent the appliance purchased. For more complex features, consult the following pages.

1Levelling FEET

2FRUIT and VEGETABLE bin *

3WINE RACK *

4SHELVES *

5REFRIGERATOR OPERATION Knob

6Food Care Zone 0°C* *

7FREEZER and STORAGE compartment

8FAST FREEZER Knob

9ICE DEVICE

10FREEZER OPERATION Knob

11Removable multipurpose SHELVES *

12BOTTLE shelf

*Varies by number and/or position, available only on certain models.

Vue d’ensemble

Ces instructions d’utilisation s’appliquent à plusieurs modèles, il se peut donc que les composants illustrés présentent des différences par rapport à ceux de l’appareil que vous avez acheté. Vous trouverez dans les pages suivantes la description des objets plus complexes.

1PIED de réglage

2Bac FRUITS et LEGUMES *

3WINE RACK *

4CLAYETTE *

5Bouton FONCTIONNEMENT REFRIGERATEUR

6Food Care Zone 0°C*

7Compartiment CONGELATION et CONSERVATION

8FAST FREEZER

9ICE DEVICE

10Bouton FONCTIONNEMENT CONGELATEUR

11Balconnet amovible PORTE-OBJETS *

12Balconnet BOUTEILLES

*Leur nombre et/ou leur emplacement peut varier, n’existe que sur certains modèles.

10

 

9

11

8

 

7

 

6

11

 

5

 

4

 

3

12

 

2

 

1

 

4

Hotpoint ENTM 18010 F, ENTM 19020 F, ENTM 18020 F, ENTM 19010 F Manual

 

 

 

 

 

 

 

 

 

 

 

 

Descripción del aparato

Descrição do aparelho

Vista en conjunto

Las instrucciones sobre el uso son válidas para distintos modelos y por lo tanto es posible que la figura presente detalles diferentes a los del aparato que Ud. ha adquirido. La descripción de las piezas más complejas se encuentra en las páginas sucesivas.

1PATAS de regulación

2Recipiente FRUTA y VERDURA *

3WINE RACK *.

4BANDEJAS *.

5Mando de FUNCIONAMIENTO DEL FRIGORÍFICO

6Food Care Zone 0°C*

7Compartimiento CONGELAMIENTO y CONSERVACIÓN

8FAST FREEZER

9ICE DEVICE

10Mando de FUNCIONAMIENTO DEL CONGELADOR

11Balconcito extraíble PORTAOBJETOS *

12Balconcito BOTELLAS

*La cantidad y/o su ubicación pueden variar, se encuentra solo en

Visão geral

Estas instruções sobre a utilização são válidas para vários modelos, portanto é possível que na figura haja pormenores diferentes do aparelho que adquiriu. Há uma descrição dos assuntos mais complexos nas páginas seguintes.

1PEZINHO de regulação

2Gaveta para FRUTAS e HORTALIÇAS *

3WINE RACK *.

4PRATELEIRA *.

5Selector de FUNCIONAMENTO DO FRIGORÍFICO

6Food Care Zone 0°C*

7Compartimento para CONGELAÇÃO e CONSERVAÇÃO

8FAST FREEZER

9ICE DEVICE

10Selector de FUNCIONAMENTO DO CONGELADOR

11Prateleira extraível da porta VÃOPARAGUARDAROBJECTOS*

12Prateleira para GARRAFAS

*Variáveis em número e/ou na posição, presente somente em alguns

algunos modelos

modelos.

10

 

9

11

8

 

7

 

6

11

 

5

 

4

 

3

12

 

2

 

1

 

5

Reversible doors

If it is necessary to change the direction in which the doors open, please contact the Technical Assistance Centre.

Réversibilité des portes

Si une inversion du sense d’ouverture des portes s’avère nécessaire, faire appel à notre service d’assistance technique.

.

Reversibilidad de la apertura de las puertas

Cuando sea necesario cambiar el sentido de apertura de las puertas, llame al servicio de Asistencia Técnica.

Reversibilidade da abertura das portas

No caso em que se torne necessário inverter o sentido de abertura das portas, contacte o serviço de Assistência Técnica.

6

Installation

!Before placing your new appliance into operation please read these operating instructions carefully. They contain important information for safe use, for installation and for care of the appliance.

!Please keep these operating instructions for future reference. Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning

1.Place the appliance in a well-ventilated humidity-free room.

2.Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.

3.Leave a space of at least 10 cm between the top part of the appliance and any furniture above it, and at least 5 cm between the sides and any furniture/side walls.

4.Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.).

5.In order to maintain the correct distance between the appliance and the wall behind it, fit the spacers supplied in the installation kit, following the instructions provided.

Levelling

1.Install the appliance on a level and rigid floor.

2.If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the front feet.

Electrical connections

After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

The appliance is earthed and the plug is compliant with the law.

The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).

The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).

The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

Start-up and use

Starting the appliance

!Before starting the appliance, follow the installation instructions (see Installation).

!Before connecting the appliance, clean the compartments and accessories well with lukewarm water and bicarbonate.

!The appliance comes with a motor protection control system which makes the compressor start approximately 8 minutes after being switched on. The compressor also starts each time the power supply is cut off whether voluntarily or involuntarily (blackout).

1.Insert the plug into the socket and ensure that the internal light illuminates ( the FREEZER OPERATION knob must not be on the position OFF) .

2. Turn the FREEZER OPERATION knob and REFRIGERATOR OPERATION knob to an average value. After a few hours you will GB be able to put food in the refrigerator.

Setting the temperature

The temperature inside the refrigerator compartment automatically adjusts itself according to the position of the thermostat knob.

min = warmest max = coldest

We recommend, however, a medium position.

The No Frost system circulates cold air continuously to collect humidity and prevent ice and frost formation. The system maintains an optimal humidity level in the compartment, preserving the original quality of the food, preventing the food from sticking together and making defrosting a thing of the past. Do not block the aeration cells by placing food or containers in direct contact with the refrigerating back panel. Close bottles and wrap food tightly.

FRUIT and VEGETABLE bin*

The salad crispers fitted inside the fridge have been specially designed for the purpose of keeping fruit and vegetables fresh and crisp. Open the humidity regulator (position B) if you want to store food in a less humid environment like vegetable, or close it (position A) to store food in a more humid environment like fruit.

A

B

ICE DEVICE*

After pouring water in the special ice cups, place them in their places in the ice device. After about 2 hours, the ice cubes will be ready. In order to get the ice cubes, it will be sufficient to turn the two buttons to the right. The ice cubes will fall in to the tray below, ready to be used.

Food Care Zone 0°C* : A compartment designed to keep meat

and fish freshness.Due to the compartment’s low temperature (-2/ +3) food can be stored for even up to one week. It can also be used for “cold meals.” Not suitable for fruit, vegetables and salads.

7

GB Using the refrigerator to its full potential

Place only cold or lukewarm foods in the compartment, never hot foods (see Precautions and tips).

Remember that cooked foods do not last longer than raw foods.

Do not store liquids in open containers: they will increase the level of humidity in the refrigerator and cause condensation to form.

SHELVES:

Due to the special guides the shelves are removable and the height is adjustable (see diagram), allowing easy storage of large containers and food. Height can be adjusted without complete removal of the shelf.

TEMPERATURE Indicator light*: to identify the coldest area in the refrigerator.

1.Check that OK appears clearly on the indicator light (see diagram).

2.If the word “OK” does not appear it means that the temperature is too high: adjust the REFRIGERATOR OPERATION knob to a higher position (colder) and wait approximately 10 hours until the temperature has been stabilised.

3.Check the indicator light again: if necessary, readjust it following the initial process. If large quantities of food have been added or if the refrigerator door has been opened frequently, it is normal for the indicator not to show OK. Wait at least 10 hours before adjusting the REFRIGERATOR OPERATION knob to a higher setting.

Using the freezer to its full potential

The temperature inside the freezer compartment automatically adjusts itself according to the position of the FREEZER OPERATION Knob.

1

warmest

MAX

coldest

We recommend, however, a medium position.

is the optimal temperature for energy saving levels. OFF switches the appliance off, including the refrigerator.

*Varies by number and/or position, available only on certain models.

Do not re-freeze food that is defrosting or that has already been defrosted. These foods must be cooked and eaten (within 24 hours).

Fresh food that needs to be frozen must not come into contact with food that has already been defrosted.

Do not place glass bottles which contain liquids, and which are corked or hermetically sealed in the freezer because they could break.

The maximum quantity of food that may be frozen daily is indicated on the plate containing the technical properties located on the bottom left side of the refrigerator compartment (for example: Kg/ 24h: 4)

!Do not open the door during freezing.

!If there is a power cut or malfunction, do not open the freezer door. This will help maintain the temperature inside the freezer, ensuring that foods are conserved for at least 9 -14 hours.

!To avoid blocking the air circulation inside the freezer, it is advisable not to obstruct the ventilation holes with food or containers.

Maintenance and care

Switching the appliance off

During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply:

1.set the FREEZER OPERATION knob on OFF;

2.pull the plug out of the socket

Cleaning the appliance

The external and internal parts, as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and bicarbonate of soda or neutral soap. Do not use solvents, abrasive products, bleach or ammonia.

The removable accessories may be soaked in warm water and soap or dishwashing liquid. Rinse and dry them carefully.

The back of the appliance may collect dust which can be removed by delicately using the hose of a vacuum cleaner set on medium power. The appliance must be switched off and the plug must be pulled out before cleaning the appliance.

Avoiding mould and unpleasant odours

The appliance is manufactured with hygienic materials which are odour free. In order to maintain an odour free refrigerator and to prevent the formation of stains, food must always be covered or sealed properly.

If you want to switch the appliance off for an extended period of time, clean the inside and leave the doors open.

Replacing the light bulb *

To replace the light bulb in the refrigerator compartment, pull out the plug from the electrical socket. Follow the instructions below. Access the light bulb by removing the cover as indicated in the diagram. Replace it with a similar light bulb within the power range indicated on the cover.

8

Precautions and tips

! The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully.

This appliance complies with the following Community Directives:

-73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments; -89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and subsequent amendments;

-2002/96/CE.

General safety

The appliance was designed for domestic use inside the home and is not intended for commercial or industrial use.

The appliance must be used to store and freeze food products by adults only and according to the instructions in this manual.

The appliance must not be installed outdoors, even in covered areas. It is extremely dangerous to leave the appliance exposed to rain and storms.

Do not touch the appliance with bare feet or with wet or moist hands and feet.

Do not touch the internal cooling elements: this could cause skin abrasions or frost/freezer burns.

When unplugging the appliance always pull the plug from the mains socket, do not pull on the cable.

Before cleaning and maintenance, always switch off the appliance and disconnect it from the electrical supply. It is not sufficient to set the TEMPERATURE ADJUSTMENT knobs on OFF (appliance off) to eliminate all electrical contact.

In the case of a malfunction, under no circumstances should you attempt to repair the appliance yourself. Repairs carried out by inexperienced persons may cause injury or further malfunctioning of the appliance.

Do not use any sharp or pointed utensils or electrical equipment - other than the type recommended by the manufacturer - inside the frozen food storage compartments.

Do not put ice cubes taken directly from the freezer into your mouth.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Keep packaging material out of the reach of children! It can become a choking or suffocation hazard.

Disposal

Observe local environmental standards when disposing packaging material for recycling purposes.

The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliancesmustnotbedisposedofinthenormalunsortedmunicipal waste stream. Old appliances must be collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.

*Varies by number and/or position, available only on certain models.

Respecting and conserving the environment

• Install the appliance in a fresh and well-ventilated room. Ensure GB that it is protected from direct sunlight and do not place it near heat sources.

Try to avoid keeping the door open for long periods or opening the door too frequently in order to conserve energy.

Do not fill the appliance with too much food: cold air must circulate freely for food to be preserved properly. If circulation is impeded, the compressor will work continuously.

Do not place hot food directly into the refrigerator. The internal temperature will increase and force the compressor to work harder and will consume more energy.

Defrost the appliance if ice forms (see Maintenance). A thick layer of ice makes cold transference to food products more difficult and results in increased energy consumption.

Troubleshooting

If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list.

The internal light does not illuminate.

The plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house.

The FREEZRT OPERATION knob is in the OFF position

The motor does not start.

The appliance comes with a motor protection control (see Start-up and use).

The refrigerator and the freezer do not cool well.

The doors do not close properly or the seals are damaged.

The doors are opened too frequently.

The TEMPERATURE ADJUSTMENT knob is not in the correct position.

The refrigerator or the freezer have been over-filled.

The food inside the refrigerator is beginning to freeze.

The TEMPERATURE ADJUSTMENT knob is not in the correct position.

The motor runs continuously.

The door is not closed properly or is continuously opened.

The outside ambient temperature is very high.

The appliance makes a lot of noise.

The appliance has not been installed on a level surface (see Installation).

The appliance has been installed between cabinets that vibrate and make noise.

The internal refrigerant makes a slight noise even when the compressor is off. This is not a defect, it is normal.

Some of the external parts of the refrigerator become hot.

These raised temperatures are necessary in order to avoid the formation of condensation on certain parts of the product.

9

Loading...
+ 19 hidden pages