General 25-195N User Manual

25-195N_V2_12/01/2011

www.general.ca

ITEM

#25-195N

7

6

5

STEEL SUPPORT STAND
FOR MAXI-LATHES

ASSEMBLY

1. Attach the middle and lower cross braces to one
leg using four carriage bolts with flat washers, lock
washers and nuts (two per cross brace) in the as­sembly order shown.

2. Attach the second leg using the same hardware in
the same assembly order.

3. Attach the upper top shelf using four carriage bolts
with flat washers, lock washers and nuts in the as­sembly order shown.

4. Attach the two support trays using four carriage
bolts with flat washers, lock washers and nuts (two
per tray).

5. Repeat step 1 to 3 with the two other legs and cross
braces.

6. Attach the second leg/cross brace assembly using
four carriage bolts with flat washers, lock washers
and nuts as shown

7 Take the 4 levelling feet and lock nuts supplied with

your lathe and attach them to the stand as shown.

1 2

3 4

11

5

6

7

1

7

6

5

3

4

8

10

9

2

12

www.general.ca

ITEM

#25-195N

25-195N_V2_12/01/2011

STEEL SUPPORT STAND
FOR MAXI-LATHES

PARTS LIST – 25-195N

PART N0. DESCRIPTION SPECIFICATIONS QTY

25195N-01 UPPER TOP SHELF 2
25195N-02 MIDDLE CROSS BRACE 2
25195N-03 LEG 4
25195N-04 CARRIAGE BOLT 5/16" x 5/8" 36
25195N-05 FLAT WASHER 5/16" 36
25195N-06 LOCK WASHER 5/16" 36
25195N-07 HEX NUT 5/16" 36
25195N-08 FLAT WASHER 3/8" 4
25195N-09 LOCK WASHER 3/8" 4
25195N-10 HEX BOLT 3/8" x 3/4" 4
25195N-11 SUPPORT TRAY 2
25195N-12 LOWER CROSS BRACE 2