DIODES SBL4030PT, SBL4035PT, SBL4040PT, SBL4045PT, SBL4050PT Datasheet

SBL4030PT - SBL4060PT

40A SCHOTTKY BARRIER RECTIFIER

Features

Schottky Barrier Chip

Guard Ring Die Construction for Transient Protection

Low Power Loss, High Efficiency

High Surge Capability

High Current Capability and Low Forward Voltage Drop

For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Application

Plastic Material: UL Flammability

Classification Rating 94V-0

Mechanical Data

Case: Molded Plastic

Terminals: Plated Leads Solderable per MIL-STD-202, Method 208

Polarity: As Marked on Body

Marking: Type Number

Weight: 5.6 grams (approx.)

Mounting Position: Any

																																	TO-3P
																																Dim	Min	Max
																																A	3.20	3.50
																												A				B	4.59	5.16
								H																				B				C	20.80	21.30
																																D	19.70	20.20
S															J																	E	2.10	2.40
																												C				G	0.51	0.76
															K
																																H	15.90	16.40
R
																																J	1.70	2.70
														L
P																																K	3.10	3.30
															G																	L	3.50	4.51
N																												D				M	5.20	5.70
																																N	1.12	1.22
																							E									P	1.93	2.18
																																Q	2.97	3.22
							M		M																							R	11.70	12.80
																																S	4.30 Typical
																																All Dimensions in mm

Maximum Ratings and Electrical Characteristics @ TA = 25 C unless otherwise specified

Single phase, half wave, 60Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

Characteristic		Symbol	SBL	SBL	SBL		SBL	SBL	SBL	Unit
			4030PT	4035PT	4040PT		4045PT	4050PT	4060PT
Peak Repetitive Reverse Voltage		VRRM
Working Peak Reverse Voltage		VRWM	30	35	40		45	50	60	V
DC Blocking Voltage		VR
RMS Reverse Voltage		VR(RMS)	21	24.5	28		31.5	35	42	V
Average Rectified Output Current	@ TC = 100 C	IO			40					A
	(Note 1)
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on rated load		IFSM			375					A
(JEDEC Method)
Forward Voltage Drop	@ IF = 20A, TC = 25 C	VFM		0.58				0.70		V
Peak Reverse Current	@ TC = 25 C	IRM			1.0					mA
at Rated DC Blocking Voltage					100
	@ TC = 100 C
Typical Junction Capacitance	(Note 2)	Cj			800					pF
Typical Thermal Resistance Junction to Case (Note 1)		R Jc			1.4					C/W
Operating Temperature Range		Tj			-55 to +125					C
Storage Temperature Range		TSTG			-55 to +150					C

Notes: 1. Thermal resistance junction to case mounted on heatsink.

2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.

DS30236 Rev. A-2

1 of 2

SBL4030PT - SBL4060PT